Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “morphological”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

The small GTPase Rab5 homologue Ypt5 regulates cell morphology, sexual development, ion-stress response and vacuolar formation in fission yeast

Highlights: •Multiple functions of Rab5 GTPase in fission yeast were found. •Roles of Rab5 in fission yeast were discussed. •Relation between Rab5 and actin cytoskeleton were discussed. -- Abstract: Inner-membrane transport is critical to cell function. Rab family GTPases play an important role in vesicle transport. In mammalian cells, Rab5 is reported to be involved in the regulation of endosome formation, phagocytosis and chromosome alignment. Here, we examined the role of the fission yeast Rab5 homologue Ypt5 using a point mutant allele. Mutant cells displayed abnormal cell morphology, mating, sporulation, endocytosis, vacuole fusion and responses to ion stress. Our data strongly suggest that fission yeast Rab5 is involved in the regulation of various types of cellular functions.

60 APPLIED LIFE SCIENCES↗

The morphology of C–S–H: Lessons from {sup 1}H nuclear magnetic resonance relaxometry

{sup 1}H nuclear magnetic resonance has been applied to cement pastes, and in particular calcium silicate hydrate (C–S–H), for the characterisation of porosity and pore water interactions for over three decades. However, there is now renewed interest in the method, given that it has been shown to be non-invasive, non-destructive and fully quantitative. It is possible to make measurements of pore size distribution, specific surface area, C–S–H density and water fraction and water dynamics over 6 orders of magnitude from nano- to milli-seconds. This information comes in easily applied experiments that are increasingly well understood, on widely available equipment. This contribution describes the basic experiments for a cement audience new to the field and reviews three decades of work. It concludes with a summary of the current state of understanding of cement pore morphology from the perspective of {sup 1}H NMR.

36 MATERIALS SCIENCE↗

Novel Fluorescent Cationic Phospholipid, O-4-Napthylimido-1-Butyl-DOPC, Exhibits Unusual Foam Morphology, Forms Hexagonal and Cubic Phases in Mixtures, and Transfects DNA

The novel cationic triester of phosphatidylcholine, O-4-napthylimido-1-butyl-dioleoylphosphatidylcholine (NB-DOPC), has been synthesized: 1-amino-4-butanol was reacted with napthylic anhydride to form 4-hydroxybutyl-1-napthylamide, which was then reacted with triflic anhydride; the resultant triflate was reacted with dioleoylphosphatidylcholine so as to transfer the napthylimido-butyl group to the unsubstituted phosphate oxygen. The resultant compound is thus not only positively charged, but also has a bulky hydrophobic moiety attached to the headgroup. This novel cationic phospholipid exhibits a peculiar long-living foam-like morphology upon hydration, which could have applications in encapsulation and delivery. It is characterized by high adhesiveness to hydrophobic surfaces. X-ray diffraction showed that it forms a lamellar structure of rather short repeat period, indicative of an unusually small interlamellar separation and low hydration level. It readily incorporates DNA and organizes into lamellar lipoplexes. These DNA-lipid complexes effectively transfect DNA into cells. In an equimolar mixture of this lipid with the anionic dioleoylphosphatidylglycerol lamellar arrays coexist with disordered uncorrelated structures, however, these transform into a bicontinuous cubic phase, Pn3m, upon addition of DNA. When mixed with another anionic lipid, cardiolipin, at a NB-DOPC/cardiolipin 2:1 molar ratio, it forms the inverted hexagonal phase which is of potential interest for nanotechnology applications.

59 BASIC BIOLOGICAL SCIENCES↗

Formation and Morphology of "shish-like" Fibril Crystals of Aliphatic Polyesters from the Sheared Melt

We found the formation of 'shish-like' fibril crystals of aliphatic polyesters such as poly(L-lactic acid) (PLLA), poly({var_epsilon}-caprolactone) (PCL), poly(12-hydroxydodecanoic acid) (PHDA) and poly(16-hydroxyhexadecanoic acid) (PHHA) from the sheared melt with shear rate {gamma} = 5 s{sup -1} observed by polarizing optical microscope (POM). The melting temperature T{sub m}s of obtained fibril crystals of PLLA and PCL were higher than those of spherulites and were close to the equilibrium melting temperature T{sub m}{sup 0}. The small angle X-ray scattering (SAXS) patterns from the bulk sample including fibril crystals, small amount of unoriented small crystals and amorphous showed no peaks arose from the existence of long periods in fibril crystals. These are the evidence that the observed fibril crystals consist of assemblies of a lot of extended chain crystals (ECCs). We observed the morphology of moderately extracted single strand of fibril crystals at the magnification of POM by means of scanning electron microscope. We found that macroscopic fibril crystals of PLLA with diameter d = 10 {micro}m consist of the bundle structure of microscopic fibril crystals with d = 2 {micro}m. From POM observation of the formation of fibril crystals of PLLA and PCL, we showed phase diagrams of molecular weight M and crystallization temperature T{sub c} for the formation of fibril crystals. From these phase diagrams, we evaluated a critical M and T{sub c} for the formation of fibril crystals. Moreover, from the sequential melting and crystallization experiments, it was implied that the entanglement and transesterification play an important role on the formation of fibril crystals of aliphatic polyesters.

36 MATERIALS SCIENCE↗

Alluvial fan morphology: A self-similar free boundary problem description

In this work, we examine approximate geometrically self-similar solutions to a parabolic free boundary value problem applied to alluvial fan surface morphology and growth. Alluvial fans are fan- or cone-shaped sedimentary deposits caused by the rapid deposition of sediment from a canyon discharging onto a flatter plain. Longitudinal, topographic profiles of fans can be readily described by a seemingly time independent dimensionless profile (DeChant et al., 1999). However, because an alluvial fan can be expected to grow over time, it is clear that this “steady” profile is certainly time dependent and can be described using a space-time self-similar solution. In an experimental and theory-based study, Guerit et al. (2014) developed a self-similar (or as they describe it a self-affine) linear solution based upon an approximate first order small parameter expansion solution for a 1-d homogeneous nonlinear diffusion equation. Direct substitution of this result into a linear diffusion equation suggests that this first order expression may not fully satisfy the associated governing equation. In contrast, we develop a more complete solution based upon a modeled approximation for the axi-symmetric formulation such that the associated temporal behavior is consistent with a 1/3 time power-law as described by Reitz and Jerolmack (2014). The resulting expression is an exact solution to a linear heat equation. Furthermore, we emphasize that a small parameter is not inherent to the resulting profile result and is not included in our model development. Though developed using rather different approaches, the formal solution developed here is in good agreement with the simple polynomial described by DeChant et al. (1999) suggesting that this self-similar solution is a suitable time dependent representation of alluvial fan longitudinal profile form and improves on earlier work.

58 GEOSCIENCES↗

A study of adhesive bonding in metal–metal, metal–CFRP, and CFRP–CFRP material combinations under shear deformation: Fracture morphologies and damage mechanisms

Safe design of adhesive joining in multi-materials in engineered structures requires the accumulation of numerous experimental data on the failure behavior of various adhesively-bonded material combinations under different loading conditions. The deep understanding of mechanical performance, fracturing morphologies, and main damage mechanisms is also quintessential for accelerating the development of proper physics-based and multi-scale models for assisting the design. Towards this goal, this work presents a comprehensive characterization of the failure behavior of adhesively-bonded metal–metal, metal–CFRP, and CFRP–CFRP material combinations under global shear deformation via single lap shear testing. Thanks to a synergistic combination of measurement methods by using Digital Imaging Correlation (DIC) and 3D optical profilometry, adhesive features on the adherend after failure were quantified and the main progressive damage mechanisms were identified. The characterization performed in this work provides quantitative data that contributes to a better understanding of shear failure in adhesive bonding across different bi-material combinations. Finally, the obtained results have practical implications, including the potential to enhance adhesive bonding design, identify failure causes in adhesive joints, and develop or validate computational models capable of capturing the observed behavior in various adhesively-bonded materials under global shear deformation.

36 MATERIALS SCIENCE↗

The role of amorphous ZIF in ZIF-8 crystallization kinetics and morphology

Understanding the composition and structure of amorphous precursor phases is fundamental for elucidating two-step crystallization mechanisms and designing shape- and size-controlled nanomaterials. However, that understanding is largely lacking for metal–organic framework compounds despite their growing significance as functional materials. Here, in this study, we report the crystallization of zeolite imidazolate frameworks-8 (ZIF-8, Zn(C 4 H 5 N 2 ) 2 ) via an amorphous ZIF (am-ZIF) solid precursor phase with a rough stoichiometric composition of Zn(C 4 H 5 N 2 ) 1.78 (C 4 H 6 N 2 ) 0.17 (CH 3 COO) 0.22 . The formation of am-ZIF is attributed to the incomplete deprotonation of 2-Methylimidazole (HmIm) and the involvement of the hydrogen bond between CH 3 COO– and –HN, which can further transform into the dense Dia(Zn) structure with a diamondoid crystal topology in pure water. Taking am-ZIF as a precursor, the tunable dissolution and recrystallization kinetics of am-ZIF into ZIF-8, due to the addition of EtOH and CTAB, allows the selective fabrication of dodecahedral, cubic, and hollow ZIF-8. Overall, an in-depth understanding of the differences in composition and structure of am-ZIF from ZIF-8 and the resulting crystallization kinetics suggests a novel approach to designing metal–organic frameworks with controlled crystal morphology.

36 MATERIALS SCIENCE↗

Synthesis, network structure and morphology of s-triazine-organosilane glassy hybrid materials

A series of five hybrid materials are synthesized by the reaction of cyanuric chloride (C{sub 3}N{sub 3}Cl{sub 3}) with different alkoxysilanes (R{sub x}Si(OC{sub 2}H{sub 5}){sub 4-x}, R=CH{sub 3}, C{sub 6}H{sub 5} and x=0, 1, 2) in ethanol using sol-gel technique. The resulting s-triazine-organosilane products were examined using spectroscopic (UV-visible, FT-IR), thermal (thermogravimetric analysis, TGA), powder X-ray diffraction (P-XRD), BET analysis and microscopic (scanning electron microscopy, SEM) techniques. These hybrid materials exhibit globular and two-dimensional morphological textures with varying degrees of crystalline microstructures. Depending on the functionality of the organosilane building blocks the obtained hybrid materials exhibit different material characteristics including their solid state, Vicat softening point (Vicat hardness), density and porosity. BET surface area measurements indicate that these materials possess small specific surface areas of 0.36-2.3 m{sup 2}/g with external surface area of approx0.02 m{sup 2}/g. The phenyl-containing hybrids exhibit pronounced hydrolytic stability compared to the methyl- and silica-based analogs. The DMSO and sulfolane solutions of the prepared hybrids are transparent to visible light whereas their cold-compressed discs are optically opaque. - Graphical abstract: Network structure of s-triazine-organosilane glassy hybrid materials.

36 MATERIALS SCIENCE↗

Investigation of structural, morphological, luminescent and thermal properties of combusted aluminium-based iron oxide

Nanocomposites of aluminium integrated hematite {alpha}-Fe{sub 2}O{sub 3} are synthesized by combustion route using aqueous solutions of AR grade ferric trichloride and aluminium nitrate as precursors. The influence of aluminium incorporation on to the morphology, XPS, photoluminescence and thermal properties has been investigated. The FESEM and AFM micrographs depict that the samples are compact and have homogeneously distributed grains of varying sizes ({approx}20-60 nm). Chemical composition and valence states of constituent elements in hematite are analyzed by XPS. In room temperature photoluminescence (PL) study, we observed strong violet emission around 436 nm without any deep-level emission and a small PL FWHM indicating that the concentrations of defects are responsible for deep-level emissions. The specific heat and thermal conductivity study shows the phonon conduction behavior is dominant. We studied interparticle interactions using complex impedance spectroscopy. We report a new potential candidate for its possible applications in optoelectronics and magnetic devices. -- Graphical abstract: Frequency and temperature dependent interparticle interactions like grains, grain boundary effects using complex impedance spectroscopy of pure and 10 at% Al:Fe{sub 2}O{sub 3} have been studied. Display Omitted

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Morphology evolution of ZrB{sub 2} nanoparticles synthesized by sol-gel method

Zirconium diboride (ZrB{sub 2}) nanoparticles were synthesized by sol-gel method using zirconium n-propoxide (Zr(OPr){sub 4}), boric acid (H{sub 3}BO{sub 3}), sucrose (C{sub 12}H{sub 22}O{sub 11}), and acetic acid (AcOH). Clearly, it was a non-aqueous solution system at the very beginning of the reactions. Here, AcOH was used as both chemical modifier and solvent to control Zr(OPr){sub 4} hydrolysis. Actually, AcOH could dominate the hydrolysis by self-produced water of the chemical propulsion, rather than the help of outer water. C{sub 12}H{sub 22}O{sub 11} was selected, since it can be completely decomposed to carbon. Thus, carbon might be accounted precisely for the carbothermal reduction reaction. Furthermore, we investigated the influence of the gelation temperature on the morphology of ZrB{sub 2} particles. Increasing the gelation temperature, the particle shapes changed from sphere-like particles at 65 deg. C to a particle chain at 75 deg. C, and then form rod-like particles at 85 deg. C. An in-depth HRTEM observation revealed that the nanoparticles of ZrB{sub 2} were gradually fused together to evolve into a particle chain, finally into a rod-like shape. These crystalline nature of ZrB{sub 2} related to the gelation temperature obeyed the 'oriented attachment mechanism' of crystallography. - Graphical Abstract: Increasing the gelation temperature, the particle shapes changed from sphere-like particles at 65 deg. C to a particle chain at 75 deg. C, and then form rod-like particles at 85 deg. C. Highlights: > ZrB{sub 2} nanoparticles were synthesized by sol-gel method in an non-aqueous solution system. > AcOH was used as both chemical modifier and solvent to control Zr(OPr){sub 4} hydrolysis. > C{sub 12}H{sub 22}O{sub 11} was selected since it can be completely decomposed to carbon. > Increasing the gelation temperature, the particles changed from sphere-like to rod-like ones. > Crystalline nature of ZrB{sub 2} obeyed the 'oriented attachment mechanism' of crystallography.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Well-defined crystallites autoclaved from the nitrate/NH{sub 4}OH reaction system as the precursor for (Y,Eu){sub 2}O{sub 3} red phosphor: Crystallization mechanism, phase and morphology control, and luminescent property

Autoclaving the rare-earth nitrate/NH{sub 4}OH reaction system under the mild conditions of 120-200 Degree-Sign C and pH 6-13 have yielded four types of well-crystallized compounds with their distinctive crystal shapes, including Ln{sub 2}(OH){sub 5}NO{sub 3}{center_dot}nH{sub 2}O (Ln=Y and Eu) layered rare-earth hydroxide (hexagonal platelets), Ln{sub 4}O(OH){sub 9}NO{sub 3} oxy-hydroxyl nitrate (hexagonal prisms and microwires), Ln(OH){sub 2.94}(NO{sub 3}){sub 0.06}{center_dot}nH{sub 2}O hydroxyl nitrate (square nanoplates), and Ln(OH){sub 3} hydroxide (spindle-shaped microrods). The occurrence domains of the compounds are defined. Ammonium nitrate (NH{sub 4}NO{sub 3}) as a mineralizer effectively widens the formation domains of the NO{sub 3}{sup -} containing compounds while leads to larger crystals at the same time (up to 0.3 mm). Crystallization mechanisms of the compounds and the effects of NH{sub 4}NO{sub 3} were discussed. Optical properties (PLE/PL) of the four phases were characterized in detail and were interpreted from the different site symmetries of Eu{sup 3+}. The compounds convert to cubic-structured (Y{sub 0.95}Eu{sub 0.05}){sub 2}O{sub 3} by annealing at 600 Degree-Sign C while retaining their original crystal morphologies. The resultant phosphor oxides of diverse particle shapes exhibit differing optical properties, in terms of luminescent intensity, asymmetry factor of luminescence and fluorescence lifetime, and the underlying mechanism was discussed. - Graphical abstract: Well-defined crystallites of the various phases have been autoclaved from the nitrate/NH{sub 4}OH reaction system. Crystallization mechanisms of the compounds and the effects of NH{sub 4}NO{sub 3} were discussed. Highlights: Black-Right-Pointing-Pointer Well-defined crystallites of four phases have been hydrothermally synthesized. Black-Right-Pointing-Pointer The occurrence domains of the compounds are defined. Black-Right-Pointing-Pointer Crystallization mechanisms and the effects of NH{sub 4}NO{sub 3} mineralizer are discussed. Black-Right-Pointing-Pointer PL properties of the compounds and their calcination products are studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The morphology and formation mechanism of pearlite in steels

A number of morphological features of pearlite were revealed through scanning electron microscopy using deeply etched specimens. These include cementite branching, bridging, gaps, holes and curvature. The presence of cementite thin films or networks along the austenite grain boundaries in eutectoid steel and at the interface between pearlite and proeutectoid ferrite in hypoeutectoid steel is another characteristic of pearlite. Furthermore, ferrite thin films surrounding the proeutectoid cementite in hypereutectoid steels are also observed. Hence, it is considered that in hypoeutectoid steels the nucleus for pearlite is a film of cementite rather than the expected proeutectoid ferrite and, similarly, in hypereutectoid steels pearlite forms from a ferrite film rather than from proeutectoid cementite. Convergent beam Kikuchi line diffraction was used to accurately determine the orientation relationships between pearlitic constituents and parent austenite in a Hadfields steel. The results show that neither the pearlitic ferrite nor the cementite is crystallographically related to the austenite grain into which the pearlite was growing and to that into which it was not growing. In addition, a new orientation relationship between pearlitic cementite and ferrite in the Hadfield steel was also observed.

36 MATERIALS SCIENCE↗

An investigation to the effect of deformation-heat treatment cycle on the eutectic morphology and mechanical properties of a Thixocast A356 alloy

The influences of deformation, heat treatment temperature and holding time on morphology and size distribution of Si containing eutectic phases of Thixocast Al-7Si-0.4 Mg alloy were investigated. The novel thermo-mechanical treatment consisted of initial cold working practice followed by a solution heat treatment at 540 deg. C for durations ranging from 2 min to 120 min followed by water quenching. Optical and scanning electron microscopes were used to study the influence of process parameters on microstructure evolution. Also, final mechanical properties were investigated using hardness test. The results indicate that, under appropriate conditions it is possible to achieve an ultrafine grain microstructure with the eutectic Si fibers fragmented and spheroidized in the entire microstructure. It was also found that, an agglomeration of sphrodized particles occurs and is governed by Ostwald ripening mechanism.

36 MATERIALS SCIENCE↗

Influence of titanium doping on the structure and morphology of MgO prepared by coprecipitation method

Ti-doped magnesium oxide powders were prepared by a chemical coprecipitation technique using magnesium nitrate hexahydrate and titanium tetrabutoxide as starting materials and ammonia hydroxide as precipitator. The influence of titanium doping on the structure and morphology of MgO powders was investigated by X-ray diffraction, X-ray fluorescence, X-ray photoelectron spectroscopy and transmission electron microscopy. The results show that titanium ion (Ti{sup 4+}) was successfully incorporated into the MgO crystal lattice, and consequently, caused the changing of MgO crystal lattice parameter. However, titanium doping resulted in varied particle sizes, and enhanced slightly the particle aggregation. It is attributed to the difference between the solubility product (K{sub sp}) of the two precursors, Mg(OH){sub 2} and TiO(OH){sub 2}, which is one of important factors in the chemical coprecipitation process.

36 MATERIALS SCIENCE↗

Effect of annealing temperature and pH on morphology and optical property of highly dispersible ZnO nanoparticles

Highly dispersible zinc oxide nanoparticles were produced in large quantity via a simple solution method. The effect of temperature and pH impact on as-prepared ZnO nanoparticles with respect to the morphological and optical characteristics has been investigated. The average particle size of ZnO nanoparticles increased with increasing annealing temperature. A sharp UV band-edge emission was observed in as-prepared ZnO nanoparticles with negligibly less intense deep level emission. However, upon annealing at high temperature in air, UV band-edge emission disappears with an evolution of a broad deep level emission in photoluminescence spectra. Similarly, by adjusting the pH of reaction medium from 4 to pH = 8 using ammonium hydroxide solution, particle size gets bigger and bigger leads to red-shift in UV band-edge emission and an appearance of deep level emission peak. At pH = 8, well resolved sharp X-ray diffraction peaks were observed with lower FWHM values due to higher crystallite sizes.

36 MATERIALS SCIENCE↗

Synthesis of Zn/Co/Fe-layered double hydroxide nanowires with controllable morphology in a water-in-oil microemulsion

The Zn/Co/Fe-layered double hydroxide nanowires were synthesized via a reverse microemulsion method by using cetyltrimethyl ammonium bromide (CTAB) /n-hexane/n-hexanol/water as Soft-Template. ZnSO{sub 4}, CoSO{sub 4}, Fe{sub 2}(SO{sub 4}){sub 3} and urea were used as raw materials. The influence of reaction temperature, time, urea concentration and Cn (molar ratio of cetyltrimethyl ammonium bromide to water) on the structure and morphology of Zn/Co/Fe-layered double hydroxides was investigated. The samples were characterized using Transmission Electron Microscopy (TEM), Inductively Coupled Plasma (ICP), X-ray Diffraction (XRD) and Infrared Absorption Spectrum (IR). The results indicate that higher temperature is beneficial to the formation of layered double hydroxides, but particles apart from nanowires could be produced if temperature is up to 120 deg. C. By varying the temperature, reaction time, urea concentration and Cn, we got the optimum conditions of synthesizing uniform Zn/Co/Fe-layered double hydroxide nanowires: 100 deg. C, more than 12 h, Cn: 30-33, urea concentration: 0.3 M.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The influence of collagen support and ionic species on the morphology of collagen/hydroxyapatite composite materials

The purpose of this investigation is to study the influence of collagenous supports and ionic species on the precipitation of hydroxyapatite (HA) from aqueous solutions. To this end, we obtained hydroxyapatite by co-precipitation from a solution of calcium hydroxide and sodium dihydrogenophosphate. The formation of HA was studied by energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The results of this study indicate that the morphology of hydroxyapatite is highly influenced by the support material and the ionic species present. The obtained materials were studied by scanning electron microscopy (SEM).

36 MATERIALS SCIENCE↗

Electrodeposition, characterization and morphological investigations of NiFe/Cu multilayers prepared by pulsed galvanostatic, dual bath technique

NiFe/Cu multilayers were grown sequentially by pulsed electrodeposition on copper (Cu) substrates. The layers were prepared in galvanostatic mode using a dual bath technique. The morphology, thickness, roughness and composition of the layers were studied using scanning electron microscopy, scanning transmission electron microscopy with energy dispersive X-ray spectroscopy, X-ray diffraction and atomic force microscopy. Analysis showed that the resulting multilayers were continuous layers with a root mean square roughness of 30 nm and a grain size of 20-60 nm. The Cu substrate and the electrodeposited Cu layer were preferentially (200) oriented while the NiFe layers were polycrystalline but with a preferred (200) texture. The thinnest multilayers produced were 20/40, NiFe/Cu, respectively. - Research Highlights: {yields} Thin MLs of Cu and Py can be ED utilizing a pulsed-galvanostatic, DBT. {yields} The resulting multilayers were continuous layers with an rms of 30 nm. {yields} The smallest average thickness achieved by DBT was 40 nm/20 nm for Cu/NiFe.

36 MATERIALS SCIENCE↗