Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “light modulated”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Pb:Sn Ratio-Driven Polytypism and Band Modulation in Photoresponsive Hexagonal Perovskitoids

Three-dimensional (3D) perovskites of the formula AMX 3 are known for their excellent optoelectronic properties, but their design is limited by the narrow range of A-site cations that can template the 3D corner-sharing structure, and many of the viable options have already been explored. These materials also face structural instability under environmental conditions. In contrast, 3D hexagonal perovskitoids, with the same chemical formula, may offer enhanced stability and richer structural diversity through a range of corner- and face-sharing octahedral configuration options, providing greater opportunities for structural design; however, challenges such as synthesis complexity and wide band gaps have hindered optoelectronic performance achieved to date. Herein, we synthesized a structural homologous series of mixed-metal hexagonal perovskitoids with the formula APb 1-x Sn x I 3 (x = 0, 0.25, 0.50, 0.75, 1; A = ethylammonium, guanidinium) and identified three polytypes (9R, 12R, 6H) using single-crystal X-ray diffraction (SCXRD). These structures exhibited increasing corner-sharing connectivity with higher Sn content, revealing a previously unobserved relationship between metal composition and structural evolution in perovskitoid materials. The incorporation of Sn reduced the band gap (tunable from 2.51 eV to 1.87 eV) and drove structural transformations, a trend seen also in density functional theory (DFT) calculations, which suggest a thermodynamic preference for Pb at face-sharing sites and Sn at corner-sharing sites. DFT band structure calculations and optical spectroscopy also reveal an anomalous behavior in these materials, which we term polytypic band modulation. This phenomenon combines conventional band bowing with the structural transformations that occur as Sn content increases, as observed in the band gap and in photoluminescence spectra. Photodiodes fabricated from thin films of these materials exhibited stable and pronounced photoresponses across various light intensities over time. Furthermore, the combination of templating 3D perovskitoids with multiple cations and alloying Pb and Sn, suggests a vastly underexplored phase space that offers new parameters to tune perovskitoids.

Cations↗
DOE OSTI2026

Beyond Thermal Limits: Manipulating Reactive Intermediate Coverages and Turnover Rates via Visible Photon-Mediated Catalysis on Rh-Doped Perovskite Oxides

Catalyst behavior depends on surface adsorbate energetics that are constrained by scaling relationships on metal surfaces. External stimuli (e.g., photons), however, can disrupt these limitations by modulating key intermediate coverages via non-thermal reaction pathways. Here, low-energy visible photon fluxes are utilized to selectively control coverages of strongly bound intermediates on isolated Rh active sites doped within a semiconductor perovskite oxide host (SrTiO 3 ). Red light (632 nm) facilitates selective photolytic CO desorption from rhodium gem-dicarbonyl (Rh(CO) 2 ) species that are ubiquitous reaction intermediates, including for the probe reaction studied herein CO oxidation to CO 2 . Thermochemical CO 2 formation rates (408 K) on Rh-doped SrTiO 3 are limited by adsorbed CO, exhibiting a negative apparent CO rate order (−0.6) and a positive O 2 rate order (+0.4). Arrhenius analyses, anaerobic CO oxidation measurements, and in situ spectroscopies assert that, thermochemically, lattice oxygens from the doped perovskite contribute to CO 2 formation rates. Notably, under red light illumination (0.76–2.02 W cm –2 ), the apparent CO rate order shifts to positive (+1). This, combined with decreasing apparent activation energies and CO coverages (wavelength-agnostic) with increasing photon flux, indicates that photons act selectively toward driving Rh(CO) 2 photolysis, even within complex reaction networks, thereby enhancing Rh accessibility, O 2 dissociation, and consequent rates. Finally, low-energy red light enables more stoichiometric feeds, leading to 650% higher CO 2 rates than those achieved thermally. Overall, this work elucidates how low-energy light can be leveraged, not just to improve reaction rates, but to selectively affect rates of individual elementary steps and key intermediate coverages, thereby breaking conventional scaling relationships that limit thermal catalyst performance.

catalysts↗
DOE OSTI2021

Sources of Subseasonal-To-Seasonal Predictability of Atmospheric Rivers and Precipitation in the Western United States

Atmospheric rivers (ARs) account for a large portion of winter precipitation in the western US. To evaluate the sources of AR and precipitation predictability at subseasonal-to-seasonal timescales, we examine the relationships between two climate modes, the El Niño/Southern Oscillation (ENSO) and Madden-Julian oscillation (MJO), and winter hydroclimate in the western US. Our analysis uses a large ensemble of the Weather Research and Forecast (WRF) model simulations from 1981 to 2017, facilitating the assessment of uncertainty in climate mode-AR relationship due to climate variability and short length of observations. Over the North Pacific basin, we find ENSO-related latitudinal shifts of ARs, but ENSO has little effect on basin-wide averaged AR frequency. Over the western US, there is some uncertainty in the ENSO-AR connection due to the impacts of ENSO indices and datasets. However, extreme El Niño events defined by the ENSO longitude index are consistently linked to increased landfalling AR activity. The MJO can lead to significantly enhanced or suppressed landfalling AR activity in the large-ensembles, depending on the phase of MJO and time lag, while observations are too short in length to robustly show this signal. ENSO substantially modulates the MJO-AR relationship, triggering variegated responses of landfalling ARs and AR precipitation in La Niña and El Niño years. Our findings highlight the need to evaluate concurrent effects of different climate modes on ARs and precipitation, and may shed light on a path toward more accurate subseasonal-to-seasonal prediction of ARs and precipitation over the western US.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Microreactor Agile Nonnuclear Experimental Testbed Test Plan

Microreactors are an attractive technology option for kick-starting nuclear innovation if they can be operated at high temperature, yielding high power conversion thermal efficiencies comparable or better than in commercial light water reactors. Microreactors are currently the smallest variation of Small Modular Reactors (SMRs). SMRs are “newer generation reactors designed to generate electric power up to 300 MWe and whose components and systems can be shop-fabricated and then transported as modules to the sites for installation as demand arises.” (IAEA, 2016). Vendors are developing microreactor designs to provide an affordable, potentially mobile source of electricity - see Fig. 1 for an example of a microreactor on a semi-truck. Various microreactor designs are possible including heat pipe- and gascooled options, which are the focus of the nonnuclear testing described in this document. In heat pipe microreactors, high-temperature heat pipes using liquid sodium or potassium working fluid transport fission heat from the core to a heat removal section which in turn transfers heat to the power conversion system working fluid. In a gas-cooled design, He or other gas will flow through a solid monolith of material and transfer heat as the temperature of the gas increases through a heat exchanger to a power conversion unit. The logistics of all these processes will be examined and tested through a series of articles at the nonnuclear test bed at Idaho National Laboratory (INL), the Microreactor Agile Nonnuclear Experiment Testbed (MAGNET) facility. Microreactors designed to produce power of 0.1-20 MWt offer the potential for more affordable nuclear energy for a range of applications. In a heat pipe microreactor, heat pipes, fuel rods, and/or moderator are intermixed in the reactor core assembly. Heat pipes extend from the core region into the heat removal section where the power conversion unit working fluid flows through holes or channels, transferring heat from the heat pipes to the working fluid. In a gas-cooled microreactor, gas flows through the solid monolith region and up into the heat exchanger region, transferring heat to the working fluid. For initial testing, the heat removal working fluid can be a low pressure gas for testing that addresses thermal stresses. In the final application, heat addition to the power conversion working fluid typically occurs at high pressure, supporting operation of an air-Brayton, supercritical CO 2 (SCO2), or He-recuperated Brayton cycle. Various stages of the steps above will be demonstrated through the tests described in this report.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

10 MWE CDCL Large Pilot Plant – pre-FEED Study

Coal Direct Chemical Looping (CDCL) is an advanced oxy-combustion technology that has the potential to substantially reduce the energy penalty and the cost of electricity (COE) for coal-fired power generation with CO₂ capture. The Babcock & Wilcox Company (B&W) and The Ohio State University (OSU) have been collaborating on the development of an iron oxide oxygen-carrier based chemical looping technology for clean power generation with inherent carbon capture. In this process, coal is dried and pulverized prior to being transported into a moving-bed reducer. In the reducer, coal reacts with the oxygen-carrier particles, forming combustion byproducts, predominantly CO₂ and H₂O, while reducing the iron oxide oxidation state from Fe₂O₃ to a mixture of FeO and Fe. The reduced state particles are then transported to a combustor reactor and re-oxidized with air. Following the oxidation, the oxygen-carrier particles are regenerated, and a large amount of heat is released for steam production. The produced steam is sent to a turbine for electricity generation. Meanwhile, the CO₂–rich stream leaving the reducer is cooled, cleaned, and compressed for subsequent pipeline transportation and sequestration. By combining air separation and fuel conversion into a single system, the CDCL technology enables the intensification of oxy-combustion processes by eliminating the energy and cost intensive cryogenic air separation unit and thereby results in higher overall plant efficiencies and lower COE’s. The use of a moving-bed reducer results in high conversions of volatile hydrocarbons and high CO₂ purity, which reduces the cost of downstream CO₂ purification for sequestration or utilization. The Babcock & Wilcox Company in collaboration with The Ohio State University, Johnson & Matthey, The Electric Power Research Institute, and Dover Light & Power completed a Preliminary Front-End Engineering and Design (Pre-FEED) study of a 10 MWe coal-direct chemical looping (CDCL) pilot plant. The planned system is a modular 10 MWe CDCL large pilot facility consisting in 4 modules of 2.5 MWe each, working in parallel and to be hosted within the current structure at the City of Dover’s Municipal Power Plant. The CDCL system can achieve auto-thermal operation and includes a sub-critical steam cycle for power generation. The pilot system was designed to demonstrate full commercial operation at a reduced scale. The coal distribution per plan area is a representative slice of larger commercial arrangements. The system includes a CO₂ recycle system, but it does not include a compression system. The large pilot includes all the environmental control equipment and oxygen carrier and ash handling systems. As part of the project, the Team performed laboratory testing and carried out multiple pilot test campaigns to obtain design and performance information at the 250 kWth CDCL pilot facility at the Babcock & Wilcox Company’s Research Center. The Team demonstrated sustained operations at designed coal inputs, high coal conversion, high CO₂ purity, heat generation on the combustor, low carbon carryover between reactors and low particle attrition. Emissions generated in the reducer reactor were identified as SO₂ and NO x . The commercial manufacturing cost of oxygen carrier particle was evaluated by JM. A particle manufacturing report was generated and submitted to the DOE. Based on the results from the pilot tests and the pre-FEED design efforts, a techno-economic analysis was performed. The study shows that the CDCL process is a promising carbon-friendly technology capable of producing electricity with high efficiency. The estimated COE of the supercritical CDCL plant is $83.3 / MWh, which meets DOE’s target of less than 30% increase in COE when compared to a supercritical PC plant without CO₂ capture. This is the lowest among the existing carbon capture technologies (post-combustion and oxy-combustion) for fossil fuel power plant. CDCL is evaluated to be the most promising technology for carbon capture from the economic aspect.

01 COAL, LIGNITE, AND PEAT↗
NASA NTRS1973

Evaluation of the electro-optic direction sensor

Evaluation of a no-moving-parts single-axis star tracker called an electro-optic direction sensor (EODS) concept is described and the results are given in detail. The work involved experimental evaluation of a breadboard sensor yielding results which would permit design of a prototype sensor for a specific application. The laboratory work included evaluation of the noise equivalent input angle of the sensor, demonstration of a technique for producing an acquisition signal, constraints on the useful field-of-view, and a qualitative evaluation of the effects of stray light. In addition, the potential of the silicon avalanche-type photodiode for this application was investigated. No benefit in noise figure was found, but the easily adjustable gain of the avalanche device was useful. The use of mechanical tuning of the modulating element to reduce voltage requirements was also explored. The predicted performance of EODS in both photomultiplier and solid state detector configurations was compared to an existing state-of-the-art star tracker.

Johnson, A. R.↗
NASA NTRS1979

Fiber optic rotation sensor /FORS/ signal detection and processing

The recent development of low-loss single-mode optical fiber waveguides for light has made possible a new class of inertial reference devices built on the principle of a closed loop interferometer. Light circulating through the loop in both directions experiences a relative phase delay proportional to rotation rate about the loop axis. This paper derives the phase delay and discusses signal detection, signal processing techniques and error sources. It is concluded that synchronous modulation and demodulation and an active gain control at the signal calculation level are required to eliminate drift errors. Potential performance is extraordinarily good; rotation rate sensitivity of a few milli-arc seconds per second and angular position random walk errors of an arc second per square root hour appear feasible.

Goss, W. C.↗
NASA NTRS1986

Controlled Ecological Life Support Systems (CELSS) conceptual design option study

Results are given of a study to explore options for the development of a Controlled Ecological Life Support System (CELSS) for a future Space Station. In addition, study results will benefit the design of other facilities such as the Life Sciences Research Facility, a ground-based CELSS demonstrator, and will be useful in planning longer range missions such as a lunar base or manned Mars mission. The objectives were to develop weight and cost estimates for one CELSS module selected from a set of preliminary plant growth unit (PGU) design options. Eleven Space Station CELSS module conceptual PGU designs were reviewed, components and subsystems identified and a sensitivity analysis performed. Areas where insufficient data is available were identified and divided into the categories of biological research, engineering research, and technology development. Topics which receive significant attention are lighting systems for the PGU, the use of automation within the CELSS system, and electric power requirements. Other areas examined include plant harvesting and processing, crop mix analysis, air circulation and atmosphere contaminant flow subsystems, thermal control considerations, utility routing including accessibility and maintenance, and nutrient subsystem design.

Oleson, Melvin↗
NASA NTRS1988

Cosmic-ray lifetime in the Galaxy - Experimental results and models

The separation of the cosmic-ray Be isotopes achieved by two satellite experiments is discussed. From the measured isotopic ratio between the radioactive Be-10 (half-life = 1,500,000 years) and the stable Be-9, it is deduced that the cosmic rays propagate through matter with an average density of 0.24 = or - 0.07 atoms/ cu cm. The implications of this result for the cosmic-ray age is reviewed in the context of two models of confinement and propagation: the homogeneous model, normally identified with confinement ot the galactic gaseous disk, and a diffusion model in which the cosmic rays extend into a galactic halo. A newly deduced cosmic-ray pathlength distribution, a self-consistent model of solar modulation, and a set of fragmentation cross sections are calculated. It is concluded that in a homogeneous model, the cosmic-ray age is 15 (+7, -4) million years, about a factor longer than early estimates based on the abundances of the light nuclei Li, Be, and B and a nominal interstellar density of 1 atom/ cu cm.

Simpson, J. A.↗
DOE OSTI2020

Optimization of Energy Flow through Synthetic Metabolic Modules and Regulatory Networks in a Model Photosynthetic Eukaryotic Microbe

Photosynthetic organisms have recently gained considerable attention for a role in development of renewable energy sources. Genome-enabled systems biology methods, coupled with functional and synthetic genomics, present opportunities to develop sustainable and economical applications such as fuel production within the next 10 to 15 years. However, optimization of light-driven metabolism for biomass or biofuel production will require a detailed systems biology understanding of photosynthetic processes and cellular metabolism. Genome-scale metabolic models (GEMs) are at the core of systems analysis of cellular processes and form a common organizational framework for analyses of data resulting from functional genomics experimental work and computational studies. Therefore, there is a clear demand for high quality photosynthetic model organisms and the appropriate computational tools that enable systems analysis of light-driven metabolism. Through research conducted we expanded the currently available repertoire of photosynthetic GEMs to include the commercially valuable model diatom Phaeoctylum tricornutum. Diatoms have a peculiar and distinct evolutionary footprint and represent a major eukaryotic lineage that is taxonomically and functionally distinct from green and red algae and vascular plants. Therefore, the true potential for light-driven metabolism aimed at biofuel production remains poorly understood at a systems level for a large subset of the global diversity of photosynthetic organisms. The metabolic capabilities of P. tricornutum were comparatively modeled with those from other photosynthetic groups in order to elucidate the occurrence of metabolic traits within and between phototrophs. Additionally, this research resulted in significant extension of the COnstraints Based Reconstruction and Analysis (COBRA) Toolbox to accommodate the crucial need for infrastructure required for ‘omics data integration and analysis in the context of genome-scale models. Therefore, the proposed research achieved two important goals. First, within the broad scope of photosynthetic organisms, we functionally compared and, as a result, identified cellular processes that require optimization in order to enable deployment as biofuel feedstock. Second, the proposed research resulted in development of key computational infrastructure, which can be further extended to other biological systems, that is currently lacking but necessary for multiple ‘omics data integration.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRSDate not supplied

A Real-Time Optical Ground Receiver for Photon Starved Environments

The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) has developed a photon-counting optical ground receiver for pulse-position modulated signals. The real-time receiver system includes a fiber interconnect, superconducting nanowire single-photon detectors (SNSPDs), and a real-time field programmable gate array (FPGA) based receiver. The fiber interconnect and SNSPDs are implemented with two different configurations. In the first, a 7-channel few-mode fiber photonic lantern couples the light from the telescope to 7 single-pixel few-mode fiber coupled SNSPDs. In the second configuration, a few-mode fiber couples light to a 16-pixel monolithic SNSPD array. The real-time FPGA-based receiver performs combining of up to 16 SNSPD channels, symbol timing recovery, demodulation, and decoding. The system is scalable with data rates ranging from 20 Mbps to 267 Mbps. It is compliant with the Consultative Committee for Space Data Systems (CCSDS) Optical Communications Coding and Synchronization Standard. This standard will be used in NASA deep space and other low photon flux missions, such as in the Orion Artemis-2 Optical Communications System (O2O) demonstration, planned for the first crewed flight of Orion. This paper describes the scalable real-time optical receiver system and presents characterization test results.

optical communications↗
NASA NTRS1994

P-MASS and P-GBA: Two new hardware developments for growing plants in space

Plant growth, and especially plant performance experiments in microgravity are limited by the currently available plant growth facilities (low light levels, inadequate nutrient delivery and atmosphere conditioning systems, insufficient science instrumentation, infrequent flight opportunities). In addition, mission durations of 10 to 14 days aboard the NSTS Space Shuttle allow for only brief periods of microgravity exposure with respect to the life cycle of a plant. Based on seed germination experiments, using the Generic BioProcessing Apparatus hardware (GBA), two new payloads have been designed specifically for plant growth. These payloads provide new opportunities for plant gravitational and space biology research and emphasize the investigation of plant performance (photosynthesis, biomass accumulations) in microgravity. The Plant-Module for Autonomous Space Support (P-MASS) was designed to utilize microgravity exposure times in excess of 30 days on the first flight of the recoverable COMET satellite (Commercial Experiment Transporter). The Plant-Generic Bioprocessing Apparatus (P-GBA), is designed for the National Space Transportation System (NSTS) Space Shuttle middeck and the SPACEHAB environment. The P-GBA is an evolution from the GBA hardware and P-MASS (plant chamber and instrumentation). The available light levels of both payloads more than double currently available capabilities.

Hoehn, Alexander↗
DOE OSTI2024

Detecting axion dark matter with black hole polarimetry

The axion, as a leading dark matter candidate, is the target of many ongoing and proposed experimental searches based on its coupling to photons. Ultralight axions that couple to photons can also cause polarization rotation of light which can be probed by the cosmic microwave background. In this work, we show that a large axion field is inevitably developed around black holes due to the Bose-Einstein condensation of axions, enhancing the induced birefringence effects. Therefore, measuring the modulation of supermassive black hole imaging polarization angles is a strong probe to the axion-photon coupling due to the formation of the axion condensation (axion star) which enhances the axion field. The oscillating axion field around black holes induces polarization rotation on the black hole image, which is detectable and distinguishable from astrophysical effects on the polarization angle, as it exhibits distinctive temporal variability and frequency invariability. In this work, we perform the theoretical calculation on the axion star formation rate and correspondingly the enhanced axion field value near supermassive black holes. Then, we present the range of axion-photon couplings within the axion mass range 10 − 21 – 10 − 16 eV that can be probed by the Event Horizon Telescope. The axion parameter space probed by black hole polarimetry will expand with the improvement in sensitivity on the polarization measurement and more black hole polarimetry targets with determined black hole masses. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

1 kV 150 A Bidirectional Isolated DC/DC Converter With Full Range ZVS For Charger Application

This paper focusses on the development of a bidirectional DC/DC converter based on dual active bridge (DAB) converter for 1 kV class fast charger applications. A novel modulation technique is proposed to achieve zero voltage switching across the entire operating range of a vehicle battery system. The topology includes a tap changer to support multiple class of vehicles. The full range ZVS operation will allow high efficiency operation even at light load, reduced dv/dt to improve transformer insulation lifetime and mitigate EMI impact. A 1 kV class, 150 A prototype was developed to validate the proposed concepts.

Kandula, Prasad↗
DOE OSTI2020

Partitioning net carbon dioxide fluxes into photosynthesis and respiration using neural networks

The eddy covariance (EC) technique is used to measure the net ecosystem exchange (NEE) of CO 2 between ecosystems and the atmosphere, offering a unique opportunity to study ecosystem responses to climate change. NEE is the difference between the total CO 2 release due to all respiration processes (RECO), and the gross carbon uptake by photosynthesis (GPP). These two gross CO 2 fluxes are derived from EC measurements by applying partitioning methods that rely on physiologically based functional relationships with a limited number of environmental drivers. However, the partitioning methods applied in the global FLUXNET network of EC observations do not account for the multiple co-acting factors that modulate GPP and RECO flux dynamics. To overcome this limitation, we developed a hybrid data-driven approach based on combined neural networks (NN C-part ). NN C-part incorporates process knowledge by introducing a photosynthetic response based on the light-use efficiency (LUE) concept, and uses a comprehensive dataset of soil and micrometeorological variables as fluxes drivers. We applied the method to 36 sites from the FLUXNET2015 dataset and found a high consistency in the results with those derived from other standard partitioning methods for both GPP (R 2 > .94) and RECO (R 2 > .8). High consistency was also found for (a) the diurnal and seasonal patterns of fluxes and (b) the ecosystem functional responses. NNC-part performed more realistic than the traditional methods for predicting additional patterns of gross CO 2 fluxes, such as: (a) the GPP response to VPD, (b) direct effects of air temperature on GPP dynamics, (c) hysteresis in the diel cycle of gross CO 2 fluxes, (d) the sensitivity of LUE to the diffuse to direct radiation ratio, and (e) the post rain respiration pulse after a long dry period. In conclusion, NN C-part is a valid data-driven approach to provide GPP and RECO estimates and complementary to the existing partitioning methods.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1978

U.S. terrestrial solar cell calibration and measurement procedures

An outline is presented of changes in measurement procedures concerning solar cells. Outdoor measurements of cell performance based on pyranometer or pyrheliometer determination of intensity are discouraged. The absolute scale of irradiance is to be adopted as soon as possible. The standard atmosphere conditions are 1000 W/sq m irradiance, temperature 28 C, air mass 1.5, and precipitable water vapor content of 2 cm. The allowable light sources for solar simulation are short arc xenon lamps, pulsed xenon lamps, and dichroic filtered tungsten lamps. Key considerations in the design of a reference cell are considered and approaches for the matching of a reference cell to a test cell or modules are discussed.

Brandhorst, H. W., Jr.↗
NASA NTRS2006

In Orbit Performance of Si Avalanche Photodiode Single Photon Counting Modules in the Geoscience Laser Altimeter System on ICESat

Si avalanche photodiode (APD) single photon counting modules (SPCMs) are used in the Geoscience Laser Altimeter System (GLAS) on Ice, Cloud, anti land Elevation Satellite (ICESat), currently in orbit measuring Earth surface elevation and atmosphere backscattering. These SPCMs are used to measure cloud and aerosol backscatterings to the GLAS laser light at 532-nm wavelength with 60-70% quantum efficiencies and up to 15 millions/s maximum count rates. The performance of the SPCMs has been closely monitored since ICESat launch on January 12, 2003. There has been no measurable change in the quantum efficiency, as indicated by the average photon count rates in response to the background light from the sunlit earth. The linearity and the afterpulsing seen from the cloud and surface backscatterings profiles have been the same as those during ground testing. The detector dark count rates monitored while the spacecraft was in the dark side of the globe have increased almost linearly at about 60 counts/s per day due to space radiation damage. The radiation damage appeared to be independent of the device temperature and power states. There was also an abrupt increase in radiation damage during the solar storm in 28-30 October 2003. The observed radiation damage is a factor of two to three lower than the expected and sufficiently low to provide useful atmosphere backscattering measurements through the end of the ICESat mission. To date, these SPCMs have been in orbit for more than three years. The accumulated operating time to date has reached 290 days (7000 hours). These SPCMs have provided unprecedented receiver sensitivity and dynamic range in ICESat atmosphere backscattering measurements.

Sun, X.↗
NASA NTRS2006

Wavelength-Agile External-Cavity Diode Laser for DWDM

A prototype external-cavity diode laser (ECDL) has been developed for communication systems utilizing dense wavelength- division multiplexing (DWDM). This ECDL is an updated version of the ECDL reported in Wavelength-Agile External- Cavity Diode Laser (LEW-17090), NASA Tech Briefs, Vol. 25, No. 11 (November 2001), page 14a. To recapitulate: The wavelength-agile ECDL combines the stability of an external-cavity laser with the wavelength agility of a diode laser. Wavelength is modulated by modulating the injection current of the diode-laser gain element. The external cavity is a Littman-Metcalf resonator, in which the zeroth-order output from a diffraction grating is used as the laser output and the first-order-diffracted light is retro-reflected by a cavity feedback mirror, which establishes one end of the resonator. The other end of the resonator is the output surface of a Fabry-Perot resonator that constitutes the diode-laser gain element. Wavelength is selected by choosing the angle of the diffracted return beam, as determined by position of the feedback mirror. The present wavelength-agile ECDL is distinguished by design details that enable coverage of all 60 channels, separated by 100-GHz frequency intervals, that are specified in DWDM standards.

Pilgrim, Jeffrey S.↗