Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “inversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Role of Ni concentration on structural and magnetic properties of inverse spinel Ferrite

Highlights: • Ni doped Co{sub 1-x}Mn{sub x}Fe{sub 2}O{sub 4} (0≤x≤0.1) nanoparticles have been synthesized with an average particle size in the range 15–20 nm. • Lattice parameter decreases with increase in Ni concentration in CoFe{sub 2}O{sub 4} nanoparticles. • XRD and FTIR analysis confirmed the formation of cubic spinel ferrite structure. • Room temperature and low temperature magnetic properties of described system have been measured. - Abstract: In present work, Nickel (Ni) substituted Mn-Co ferrite nanoparticles, with doping content varying from 0 to 0.1, have been synthesized. The inverse spinel structure of doped cobalt ferrite has been claimed by X-ray diffractometer with average particle size of 20 nm. The decrease in lattice parameter and increase in X-ray density has been found with increase in Ni concentration in ferrite structure. Fourier transform infrared spectroscopy analysis showed two vibrational frequency bands (υ{sub 1} and υ{sub 2}) for octahedral and tetrahedral sites depicting the formation of spinel ferrite. In addition, Transmission electron microscopy analyses were carried out to investigate particle size, which indicates that TEM and XRD analyses are in agreement. Magnetic analyses depict that coercivity value increases from 635 Oe to 841 Oe in Ni doped Mn-Co ferrite. Exchange interactions between Ni and Mn{sub 0.2}Co{sub 0.8-x}Fe{sub 2}O{sub 4} result for enlargement in coercivity and shift in hysteresis loop towards positive direction along the field axis. The increment in magnetic coercive field and exchange bias has been observed as temperature decreases. Enhanced magnetic properties at low temperature are attributed to magneto-crystalline anisotropy and surface effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modified inverse micelle synthesis for mesoporous alumina with a high D4 siloxane adsorption capacity

In this work, mesoporous aluminas (MAs) with uniform and monomodal pores were fabricated via a modified inverse micelle synthesis method, using a non-polar solvent (to minimize the effect of water content) and short reaction time (for a fast evaporation process). The effects of reaction times (4–8 h), surfactant chain lengths (non-ionic surfactants), and calcination temperatures and hold times (450–600 °C; 1–4 h) on the textural properties of MA were studied. Additionally, the targeted pore sizes of MA were obtained in the range of 3.1–5.4 nm by adjusting the surfactant and reaction time. The surface area and pore volume were controlled by the calcination temperature and hold time while maintaining the thermal stability of the materials. The tuned MA of the large mesopore volume achieved 168 mg/g octamethylcyclotetrasiloxane (D4 siloxane) adsorption capacity, a 32% improvement compared to commercially activated alumina. Finally, after three adsorption recycles, the synthesized MA still maintained approximate 85% of its original adsorption capacity, demonstrating a sustainable adsorption performance and high potential for related industrial applications.

25 ENERGY STORAGE↗

Simulations and analysis tools for charge-exchange (d, 2 He) reactions in inverse kinematics with the AT-TPC

Charge-exchange (d, 2 He) reactions in inverse kinematics at intermediate energies are a very promising method to investigate the Gamow–Teller transition strength in unstable nuclei. A simulation and analysis software based on the attpcroot package was developed to study this type of reactions with the active-target time projection chamber (AT-TPC). The simulation routines provide a realistic detector response that can be used to understand and benchmark experimental data. Analysis tools and correction routines can be developed and tested from simulations in ATTPCROOT , because they are processed in the same way as the real data. In particular, we study the feasibility of using coincidences with beam-like particles to unambiguously identify the (d, 2 He) reaction channel, and to develop a kinematic fitting routine for future applications. More technically, the impact of space-charge effects in the track reconstruction, and a possible correction method are investigated in detail. Finally, this analysis and simulation package constitutes an essential part of the software development for the fast-beams program with the AT-TPC.

(d,2He)↗

Supersymmetry, the ILC, and the LHC inverse problem.

We report the results of the first large scale examination of the MSSM parameter space at the International Linear Collider (ILC). In particular, we address the question of whether or not the ILC can help to resolve the LHC Inverse Problem within this context. We examine 242 randomly generated but representative points in the MSSM parameter space which were found to lead to somewhat difficult signatures at the LHC. Including full Standard Model backgrounds and a fast detector simulation, our study finds that only roughly one third of these scenarios lead to visible signatures of some kind with a significance {ge} 5 at the ILC with {radical}s = 500 GeV. However, kinematically accessible charged sparticles are visible over 90% of the time. Furthermore, we examine these points in the parameter space pairwise and find that only one third of the pairs produce distinguishable signatures at the ILC at 5{sigma}. Going to a 1 TeV center of mass energy would substantially improve this situation since the dominant limitations are kinematic in origin.

43 PARTICLE ACCELERATORS↗

First measurement in the Gamow window of a reaction for the γ-process in inverse kinematics: 76 Se(α,γ) 80 Kr

The p-nuclei are the few stable nuclei heavier than iron on the neutron-deficient side of the valley of stability that cannot be produced through astrophysical neutron-capture reactions. The limited experimental data on reactions through which the p-nuclei might be produced leaves the origin of their production largely unknown. This work presents the first cross section measurements of the 76 Se(α,γ) 80 Kr reaction. The rate of the time reversed reaction, 80 Kr(γ,α) 76 Se, is one of the most uncertain of possible reactions which can occur at the 80 Kr branching point on the ,-process photo-disintegration pathway. The reaction flow through 80 Kr will directly affect the final abundance of the p nuclide 78 Kr. Experimental cross sections at two astrophysically relevant energies are reported and compared to cross sections calculated using Hauser-Feshbach codes TALYS, NON-SMOKER, and SMARAGD. The success of these first (α,γ) cross section measurements performed in inverse kinematics in the energy region of the γ-process opens the door for future studies of reactions on radioactive γ-process nuclides.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Inverse Oxide/Metal Catalysts: A Versatile Approach for Activity Tests and Mechanistic Studies

There is a general desire to improve the configuration of industrial catalysts to take advantage of the intrinsic properties of metal oxides. In recent years, a series of studies has been published examining the growth of oxide nanoparticles on metal substrates. These studies have revealed structures for the supported oxide which are different from those found in bulk phases. In addition, the oxide {leftrightarrow} metal interactions can alter the electronic states of the oxide producing new chemical properties. On an inverse oxide/metal catalyst, the reactants can interact with defect sites of the oxide nanoparticles, metal sites, and the metal-oxide interface. In these systems, one can couple the special reactivity of the oxide nanoparticles to the reactivity of the metal to obtain high catalytic activity. Furthermore, an oxide/metal system is also an attractive model for fundamental studies. It can be used to investigate the role of the oxide in a catalytic process, and how the stability of different reaction intermediates depends on the nature of the oxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Inverse antagonist activities of parabens on human oestrogen-related receptor γ (ERRγ): In vitro and in silico studies

Parabens are p-hydroxybenzoic acid esters that have been used extensively as preservatives in foods, cosmetics, drugs and toiletries. These intact esters are commonly detected in human breast cancer tissues and other human samples, thus arousing concern about the involvement of parabens in human breast cancer. In this study, an in vitro nuclear receptor coactivator recruiting assay was developed and used to evaluate the binding activities of parabens, salicylates and benzoates via antagonist competitive binding on the human oestrogen-related receptor γ (ERRγ), which is known as both a diagnostic biomarker and a treatment target of breast cancer. The results showed that all of the test parabens (methyl-, ethyl-, propyl-, butyl- and benzylparaben) possessed clear inverse antagonist activities on ERRγ, with a lowest observed effect level (LOEL) of 10{sup −7} M and the 50% relative effective concentrations (REC50) varying from 3.09 × 10{sup −7} to 5.88 × 10{sup −7} M, whereas the salicylates possessed much lower activities and the benzoates showed no obvious activity. In silico molecular docking analyses showed that parabens fitted well into the active site of ERRγ, with hydrogen bonds forming between the p-hydroxyl group of parabens and the Glu275/Arg316 of ERRγ. As the paraben levels reported in breast cancer tissues are commonly higher than the LOELs observed in this study, parabens may play some role via ERRγ in the carcinogenesis of human breast cancer. In addition, parabens may have significant effects on breast cancer patients who are taking tamoxifen, as ERRγ is regarded as a treatment target for tamoxifen. - Highlights: • An oestrogen-related receptor γ coactivator recruiting assay was developed. • Strong binding activities of parabens with oestrogen-related receptor γ were found. • The paraben levels reported in breast cancer tissues were higher than their LOELs. • Parabens may play some role via ERRγ in the carcinogenesis of human breast cancer. • Parabens may have significant effects in breast cancer patients taking tamoxifen.

60 APPLIED LIFE SCIENCES↗

Ciproxifan, a histamine H{sub 3} receptor antagonist and inverse agonist, presynaptically inhibits glutamate release in rat hippocampus

Ciproxifan is an H{sub 3} receptor antagonist and inverse agonist with antipsychotic effects in several preclinical models; its effect on glutamate release has been investigated in the rat hippocampus. In a synaptosomal preparation, ciproxifan reduced 4-aminopyridine (4-AP)-evoked Ca{sup 2+}-dependent glutamate release and cytosolic Ca{sup 2+} concentration elevation but did not affect the membrane potential. The inhibitory effect of ciproxifan on 4-AP-evoked glutamate release was prevented by the Gi/Go-protein inhibitor pertussis toxin and Ca{sub v}2.2 (N-type) and Ca{sub v}2.1 (P/Q-type) channel blocker ω-conotoxin MVIIC, but was not affected by the intracellular Ca{sup 2+}-release inhibitors dantrolene and CGP37157. Furthermore, the phospholipase A{sub 2} (PLA{sub 2}) inhibitor OBAA, prostaglandin E{sub 2} (PGE{sub 2}), PGE2 subtype 2 (EP{sub 2}) receptor antagonist PF04418948, and extracellular signal-regulated kinase (ERK) inhibitor FR180204 eliminated the inhibitory effect of ciproxifan on glutamate release. Ciproxifan reduced the 4-AP-evoked phosphorylation of ERK and synapsin I, a presynaptic target of ERK. The ciproxifan-mediated inhibition of glutamate release was prevented in synaptosomes from synapsin I-deficient mice. Moreover, ciproxifan reduced the frequency of miniature excitatory postsynaptic currents without affecting their amplitude in hippocampal slices. Our data suggest that ciproxifan, acting through the blockade of Gi/Go protein-coupled H{sub 3} receptors present on hippocampal nerve terminals, reduces voltage-dependent Ca{sup 2+} entry by diminishing PLA{sub 2}/PGE{sub 2}/EP{sub 2} receptor pathway, which subsequently suppresses the ERK/synapsin I cascade to decrease the evoked glutamate release. - Highlights: • Ciproxifan presynaptically reduces glutamate release in the hippocampus in vitro. • Decrease in voltage-dependent Ca{sup 2+} influx is involved. • A role for the PLA{sub 2}/PGE{sub 2}/EP{sub 2} pathway in the action of ciproxifan is suggested. • Decreased ERK and synapsin I activity is also involved. • This study provides new insight into the mode by which ciproxifan acts in the brain.

60 APPLIED LIFE SCIENCES↗

Near-wall model for compressible turbulent boundary layers based on an inverse velocity transformation

In this work, a near-wall model, which couples the inverse of a recently developed compressible velocity transformation (Griffin et al., Proc. Natl Acad. Sci., vol. 118, 2021, p. 34) and an algebraic temperature–velocity relation, is developed for high-speed turbulent boundary layers. As input, the model requires the mean flow state at one wall-normal height in the inner layer of the boundary layer and at the boundary-layer edge. As output, the model can predict mean temperature and velocity profiles across the entire inner layer, as well as the wall shear stress and heat flux. The model is tested in an a priori sense using a wide database of direct numerical simulation high-Mach-number turbulent channel flows, pipe flows and boundary layers (48 cases, with edge Mach numbers in the range 0.77–11, and semi-local friction Reynolds numbers in the range 170–5700). The present model is significantly more accurate than the classical ordinary differential equation (ODE) model for all cases tested. The model is deployed as a wall model for large-eddy simulations in channel flows with bulk Mach numbers in the range 0.7–4 and friction Reynolds numbers in the range 320–1800. When compared to the classical framework, in the a posteriori sense, the present method greatly improves the predicted heat flux, wall stress, and temperature and velocity profiles, especially in cases with strong heat transfer. In addition, the present model solves one ODE instead of two, and has a computational cost and implementation complexity similar to that of the commonly used ODE model.

42 ENGINEERING↗

Oxygen-Vacancy-Induced Midgap States Responsible for the Fluorescence and the Long-Lasting Phosphorescence of the Inverse Spinel Mg(Mg,Sn)O 4

Samples of inverse spinel Mg 2 SnO 4 were prepared using a ceramic method, their phosphorescence phenomenon was probed by optical measurements, and its cause was explored on the basis of density functional theory calculations for model structures of Mg 2 SnO 4 with oxygen vacancies VO. Mg 2 SnO 4 exhibits long-lasting luminescence at two different wavelength regions, peaking at ~498 and ~755 nm. A Sn-VO-Sn defect plus a Mg vacancy VMg away from the VO generates the empty midgap states, σSn-Sn and σSn-Sn*, localized at the Sn-VO-Sn defect, while an oxygen vacancy VO between adjacent Sn 4+ and Mg 2+ sites creates a filled midgap state Sn 2+ (5s 2 lone pair) lying below the σ Sn-Sn level. The long-lasting luminescence at two different wavelength regions and the up-conversion photostimulated luminescence observed for undoped Mg 2 SnO 4 are well explained by considering the σ Sn-Sn * level as the trapping level for a photogenerated electron.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Inverse Band Structure Design via Materials Database Screening: Application to Square Planar Thermoelectrics

Electronic band structure contains a wealth of information on the electronic properties of a solid and is routinely computed. However, the more difficult problem of designing a solid with a desired band structure is an outstanding challenge. In order to address this inverse band structure design problem, we devise an approach using materials database screening with materials attributes based on the constituent elements, nominal electron count, crystal structure, and thermodynamics. Our strategy is tested in the context of thermoelectric materials, for which a targeted band structure containing both flat and dispersive components with respect to crystal momentum is highly desirable. We screen for thermodynamically stable or metastable compounds containing d 8 transition metals coordinated by anions in a square planar geometry in order to mimic the properties of recently identified oxide thermoelectrics with such a band structure. In doing so, we identify 157 compounds out of a total of over half a million candidates. After further screening based on electronic band gap and structural anisotropy, we explicitly compute the band structures for the several of the candidates in order to validate the approach. We successfully find two new oxide systems that achieve the targeted band structure. Electronic transport calculations on these two compounds, Ba 2 PdO 3 and La 4 PdO 7 , confirm promising thermoelectric power factor behavior for the compounds. This methodology is easily adapted to other targeted band structures and should be widely applicable to a variety of design problems.

36 MATERIALS SCIENCE↗

Computational Investigation of Technetium(IV) Incorporation into Inverse Spinels: Magnetite (Fe 3 O 4 ) and Trevorite (NiFe 2 O 4 )

Iron oxides and oxyhydroxides play an important role in minimizing the mobility of redox-sensitive elements in engineered and natural environments. For the radionuclide technetium-99 (Tc), these phases hold promise as primary hosts for increasing Tc loading into glass waste form matrices, or as secondary sinks during the long-term storage of nuclear materials. Recent experiments show that the inverse spinel, magnetite [Fe(II)Fe(III)2O4], can incorporate Tc(IV) into its octahedral sub-lattice, and in that same class of materials, trevorite [Ni(II)Fe(III)2O4] is also being investigated for its ability to host Tc(IV). However, questions remain regarding the most energetically favorable charge-compensation mechanism for Tc(IV) incorporation in each structure, which will affect Tc behavior under changing waste processing or storage conditions. Here, quantum-mechanical methods were used to evaluate incorporation energies and optimized lattice bonding environments for three different, charge-balanced Tc(IV) incorporation mechanisms in magnetite and trevorite. In both cases, the removal of two octahedral Fe(II) or Ni(II) ions upon the addition of Tc(IV) to an octahedral site is the most stable mechanism, relative to the creation of octahedral Fe(III) defects or increasing octahedral Fe(II) content. Following hydration-energy corrections, Tc(IV) incorporation into magnetite is energetically favorable while an energy barrier exists for trevorite.

Environmental Molecular Sciences Laboratory↗

Effects of the Inverse Trans-Influence in a Berkelium(III) Phosphine Oxide Complex

An example of a 249 Bk 3+ phosphine oxide complex has been prepared to examine and quantify the effects of the inverse trans-influence (ITI) on a late actinide complex. This has been accomplished through a comparison of cis and trans Bk-ligand bonds in the meridional berkelium(III) complex, BkBr 3 (OPCy 3 ) 3 (OPCy 3 = tricyclohexylphosphine oxide). A detailed bond metric analysis was completed that includes the shortest published distance for a Bk 3+ −O bond, attributed to the smaller coordination number of Bk 3+ of six in mer-BkBr 3 (OPCy 3 ) 3 . ITI calculations of the trans Bk 3+ −O bond provide an ITI value (98.5(2)%) comparable to that of mer-AmBr 3 (OPCy 3 ) 3 (98.2(2)%) and indicate a small 5f orbital contribution to bonding. This effect is discussed in the context of the isomorphous lanthanide(III) series where the ITI is calculated to be higher for mer-BkBr 3 (OPCy 3 ) 3 than in most Ln 3+ analogues.

Actinides↗

RLMolLM: Reinforcement Learning-Enhanced Language Model Framework for Inverse Molecular Design

Inverse molecular design faces significant challenges due to vast chemical space and complex property requirements. While language models show promise for molecular generation, they struggle with validity, multi-property optimization, and structural constraints. This work presents RLMolLM, a reinforcement learning framework combining Proximal Policy Optimization (PPO) with genetic algorithms to address these limitations. Our approach optimizes multiple user-specified properties including quantitative estimates of drug-likeness (QED), synthetic accessibility (SA), and ADMET (absorption, distribution, metabolism, excretion, and toxicity) endpoints without requiring complete model retraining, while maintaining capability for scaffold-constrained generation where specific substructures must be preserved. We outperform state-of-the-art methods for molecular optimization, achieving best QED scores across GDB13, Moses, and Zinc datasets with up to 31% improvement over previous methods while maintaining excellent validity, uniqueness, and novelty metrics. For simultaneous multi-property optimization, our framework achieves substantial improvements in ADMET properties including 4.5-fold reduction in hERG toxicity and enhanced Caco-2 permeability compared to Moses dataset. Under structural constraints, the framework significantly improves molecular validity while preserving scaffolds and effectively optimizing properties. In conclusion, this versatile solution advances pharmaceutical and materials molecular design through effective integration of reinforcement learning and genetic algorithms with multi-property optimization and scaffold preservation.

Genetic algorithms↗

Machine Learning Potentials with the Iterative Boltzmann Inversion: Training to Experiment

Methodologies for training machine learning potentials (MLPs) with quantum-mechanical simulation data have recently seen tremendous progress. Experimental data have a very different character than simulated data, and most MLP training procedures cannot be easily adapted to incorporate both types of data into the training process. Here, we investigate a training procedure based on iterative Boltzmann inversion that produces a pair potential correction to an existing MLP using equilibrium radial distribution function data. By applying these corrections to an MLP for pure aluminum based on density functional theory, we observe that the resulting model largely addresses previous overstructuring in the melt phase. Interestingly, the corrected MLP also exhibits improved performance in predicting experimental diffusion constants, which are not included in the training procedure. The presented method does not require autodifferentiating through a molecular dynamics solver and does not make assumptions about the MLP architecture. Our results suggest a practical framework for incorporating experimental data into machine learning models to improve the accuracy of molecular dynamics simulations.

36 MATERIALS SCIENCE↗

Efficient Mixed-Precision Matrix Factorization of the Inverse Overlap Matrix in Electronic Structure Calculations with AI-Hardware and GPUs

In recent years, a new kind of accelerated hardware has gained popularity in the artificial intelligence (AI) community which enables extremely high-performance tensor contractions in reduced precision for deep neural network calculations. In this article, we exploit Nvidia Tensor cores, a prototypical example of such AI-hardware, to develop a mixed precision approach for computing a dense matrix factorization of the inverse overlap matrix in electronic structure theory, S –1 . This factorization of S –1 , written as ZZT = S –1 , is used to transform the general matrix eigenvalue problem into a standard matrix eigenvalue problem. Here we present a mixed precision iterative refinement algorithm where Z is given recursively using matrix–matrix multiplications and can be computed with high performance on Tensor cores. To understand the performance and accuracy of Tensor cores, comparisons are made to GPU-only implementations in single and double precision. Additionally, we propose a nonparametric stopping criteria which is robust in the face of lower precision floating point operations. The algorithm is particularly useful when we have a good initial guess to Z, for example, from previous time steps in quantum-mechanical molecular dynamics simulations or from a previous iteration in a geometry optimization.

36 MATERIALS SCIENCE↗

Preparation and Structural Characterization of ZrO 2 /CuO x /Cu(111) Inverse Model Catalysts

CO 2 hydrogenation to methanol is regarded as a promising reaction to catalytically convert a major greenhouse gas (CO 2 ) into a value-added product (methanol). In the current study, scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS) were applied to investigate the growth mode of low coverages (<0.2 ML) of ZrO 2 in an inverse ZrO 2 /CuOx/Cu(111) system, which has the potential to achieve a high selectivity for a direct CO 2 to methanol transformation. It was found that the morphology of ZrO 2 was strongly affected by the preparation method. The ZrO 2 /CuO x /Cu(111) model catalyst prepared by the oxidation at 600 K of Zr pre-deposited on Cu(111) exhibited substantial mixing of ZrO 2 and CuO x . In contrast, the direct deposition of Zr under an O 2 ambient over CuO x /Cu(111) at 600 K produced small ZrO 2 islands (10-12 nm in size) with a two-dimensional structure (i.e. only one layer of ZrO 2 ). XPS studies indicate that both preparation methods lead to ZrO 2 /CuO x /Cu(111) surfaces. The model catalyst prepared by the direct deposition of Zr in O 2 was annealed up to 700 K in ultra-high vacuum. Both STM and XPS results suggest no apparent change in ZrO 2 , while CuO x was reduced at such annealing conditions. The island size of 10-12 nm observed for ZrO 2 on Cu(111) is much smaller than island sizes seen for CeO 2 (30-50 nm) and ZnO (300-500 nm) on the same substrate, opening the possibility for unique chemical properties

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reactivity of a Zirconia–Copper Inverse Catalyst for CO 2 Hydrogenation

Copper–zirconia catalysts have been shown to be effective for methanol synthesis via CO 2 hydrogenation, yet the active phases and reaction mechanism remain uncertain. Here, an inverse model catalyst ZrO 2 /CuO 2 /Cu(111) was prepared by mass-selected ion deposition and tested for CO 2 hydrogenation under near-ambient pressure (AP) reaction conditions by using X-ray photoelectron spectroscopy (NAP-XPS) and infrared reflection–absorption spectroscopy (NAP-IRAS). The spatial resolution afforded by the small entrance cone of the AP-XPS spectrometer was used to resolve regions of the surface with and without Zr deposition. Carbon 1s core level spectra of the ZrO 2 /Cu 2 O/Cu(111) regions of the surface under 500 mTorr of CO 2 + H 2 (1:3 ratio) show evidence for reaction intermediates including carbonate (CO 3 *), formate (HCOO*), and H x CO* species, with methoxy having the highest surface concentration at 500–600 K. These intermediates are confirmed by IRAS vibrational spectra. In regions of the surface without Zr, the Cu 2 O/Cu(111) is reduced to metallic Cu, and the surface intermediates are different and are present at much lower concentrations. The observed surface intermediates and their temperature dependence suggest a mechanism in which CO 2 is adsorbed on zirconia as carbonate (CO 3 *) and then converted to HCOO* and H x CO* hydrogenated intermediates that ultimately lead to methoxy (CH 3 O*), the final surface-bound precursor for methanol. Overall, the results clearly demonstrate the promotional effects of small ZrO 2 particles for enhancing the reactivity of Cu surfaces for CO 2 hydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗