Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “graph”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Earth-atmosphere system and surface reflectivities in arid regions from Landsat MSS data

Previously developed programs for computing atmospheric transmission and scattering of the solar radiation are used to compute the ratios of the earth-atmosphere system (space) directional reflectivities in the nadir direction to the surface Lambertian reflectivity, for the four bands of the Landsat multispectral scanner (MSS). These ratios are presented as graphs for two water vapor levels, as a function of the surface reflectivity, for various sun elevation angles. Space directional reflectivities in the vertical direction are reported for selected arid regions in Asia, Africa, and Central America from the spectral radiance levels measured by the Landsat MSS. From these space reflectivities, surface reflectivities are computed applying the pertinent graphs. These surface reflectivities are used to estimate the surface albedo for the entire solar spectrum. The estimated albedos are in the range 0.34-0.52, higher than the values reported by most previous researchers from space measurements, but are consistent with laboratory and in situ measurements.

Otterman, J.↗

Conjugate photoelectron fluxes observed on Atmosphere Explorer C

The results are presented of a number of observations made with the aid of the Atmosphere Explorer C spacecraft under conditions which provided an unambiguous opportunity to study photoelectrons entering the atmosphere after flowing along the geomagnetic field from the magnetic conjugate point. A graph is presented with energy spectra of electrons observed precipitating into the atmosphere when the magnetic conjugate point was illuminated. Another graph shows the average energy spectra of electrons observed at 263 km for a range of solar zenith angles when the zenith angles at the magnetic conjugate point varied from 100 to 81 deg.

Peterson, W. K.↗

The plasmapause revisited

A statistical investigation is conducted concerning the plasmapause behavior observed from Explorer 45 during various levels of magnetic activity. Aspects of data handling are reported and the implications of a constant density level for a plasmapause definition are discussed. The average local time dependence of the gradient saturation events and the sharp saturation events detected on Explorer 45 is shown with the aid of graphs. Other graphs show the results of the statistical processing operations. The significance of the obtained data is discussed.

Maynard, N. C.↗

HF excited instabilities in space plasmas

It has now become technologically feasible to construct ground-based HF radar systems which can deliver RF energy to the ionospheric plasma, with power densities sufficient to alter the ionospheric electron thermal budget and plasma characteristics. Effects produced by a ground-based transmitter of a power aperture of the order of 10,000 Mw sq m in the frequency range from 4 to 12 MHz are shown in a graph. Another graph presents a profile of electron gas temperature enhancement due to energy deposition by a high power HF transmitter. The conduction of high-power HF ionospheric plasma experiments is discussed. Attention is given to plasma instabilities, wave-particle acceleration effects, spacial and time scales, parametric instabilities, spread-F, and the possibility of placing high power-aperture radars on an orbiting space platform.

Carlson, H. C., Jr.↗

Evidence that cosmic gamma-ray bursts are galactic

Balloon observations registering scatter angles in a liquid scintillator have revealed gamma-ray bursts having energies as low as 10 to the -7th ergs per square cm. The burst distribution is graphed according to energy and frequency. The hypothesis that the bursts are galactic in origin is in good agreement with their small recorded energies and their predicted distribution on the graph.

White, R. S.↗

Rain depolarization and attenuation measurements at 11.7, 19.04, and 28.56 GHz - A description of the experiment and some preliminary results

The considered investigation made use of the Communications Technology Satellite (CTS) downlink and the beacons carried by the Comstar satellites. The general behavior of rain attenuation and depolarization is illustrated with the aid of data from a storm which took place on July 15, 1976. The effect of the rain on the copolarized signal is indicated in a graph. Another graph shows the behavior of the cross-polarized signal component. Phase effects are also considered together with statistical curves for attenuation. The considered data from CTS indicate that, at least during summer convective storms, attenuation at 11.7 GHz is much more severe than anticipated. Attenuation may be a more serious impediment to dual polarized satellite links at this frequency than is depolarization.

Bostian, C. W.↗

Analysis of simulated measurements of earth emitted radiation using geometric shape factors, and some results from analysis of ESSA 7 and Nimbus 6 data

In the reported study, simulated measurements of earth radiation with wide field-of-view (WFOV) radiometers are reduced to earth fluxes through geometric shape factors. Estimates of emitted flux for global and zonal scales and for regions smaller than the detector field-of-view are compared to fluxes derived directly from a model. Geometric shape factors are used to estimate global, zonal, and regional averages of earth-emitted flux from measurements with WFOV detectors on the ESSA 7 satellite and the Nimbus 6 satellite. Zonal and global averages of emitted flux for each of the 3-month periods of ESSA 7 data are shown in a graph. Another graph shows zonal and global averages of emitted flux for August 1975 obtained with the aid of Nimbus 6. The data are compared to values reported by Green and Smith (1977) who used a spherical harmonic solution.

Weaver, W. L.↗

Observed variability of aircraft noise footprint measurements

A description is presented of some measurements which illustrate the variability of the experimentally developed ground noise footprints for a series of landing approach operations of a turbojet aircraft and a turbine powered helicopter. Measurements on the recently developed NASA Remotely Operated Multiple Array Acoustic Range are considered. The information presented is related to a turbojet fighter aircraft and a turbine powered helicopter performing landing approach operations along a 3 deg approach path. Each vehicle was acquired on radar tracking approximately 10 kilometers from the touchdown point and entered the test area at an altitude of about 470 m. The measured variations in meteorological quantities for the two time periods during which these tests were conducted are presented in graphs. Other graphs show the ground noise contour for the turbojet aircraft and the turbine helicopter.

Maglieri, D. J.↗

Is osmium chemically fractionated in the moon

An investigation was conducted involving the determination of Os in 53 highland samples from the Apollo 14-17 missions. The Os/Ir ratio was found to remain essentially constant at 1.05 as Os and Ir abundances vary over four orders of magnitude. The Os-Au and the Os-Ni correlation in highland samples is presented in graphs. The graphs show that the majority of highland samples have Os/Au and Os/Ni ratios somewhat below the cosmic value. But there is no reason to attribute this trend to a loss of Os by local processes, because two other refractory siderophiles, Ir and Re, show exactly the same trend. Results on more than 150 analyzed highland samples show that meteoritic groups of low (Ir, Re, Os)/Au ratio are much more common at the Apollo landing sites than are groups of high ratio.

Hertogen, J.↗

Temperature dependence of Fe/++/ crystal field spectra - Implications to mineralogical mapping of planetary surfaces

Results are reported of Fe(++) crystal field spectral measurements for olivines and pyroxenes up to 400 C. The results are correlated with crystal structure data at elevated temperatures, and the validity of remote-sensed identifications of minerals on hot surfaces of the moon and Mercury is assessed. Two techniques were used to obtain spectra of minerals at elevated temperatures using a spectrophotometer. One employed a diamond cell assembly or a specially designed sample holder to measure polarized absorption spectra of heated single crystals. For the other technique, a sample holder was designed to attach to a diffuse reflectance accessory to produce reflectance spectra of heated powdered samples. Polarized absorption spectra of forsterite at 20-400 C are shown in a graph. Other graphs show the temperature dependence of Fe(++) crystal field bands in olivines, the diffuse reflectance spectra of olivine at 40-400 C, the polarization absorption spectra of orthopyroxene at 30-400 C, the diffuse reflectance spectra of pigeonite at 40-400 C, and unpolarized absorption spectra of lunar pyroxene from Apollo 15 rock 15058.

Sung, C.-M.↗

Geochemical studies of the White Breccia Boulders at North Ray Crater, Descartes region of the lunar highlands

The samples of the White Breccia Boulders obtained during the Apollo 16 mission and investigated in the reported study include an anorthositic breccia (67415), a dark matrix breccia (67435), a light matrix breccia (67455), and a large clast of dark matrix breccia (67475) taken from the 67455 boulder. The chemical analyses of bulk samples of the samples are listed in a table. A graph shows the lithophile trace element abundances. Another graph indicates the variation of Sm with Al2O3 content for samples from the White Breccia Boulders. The North Ray Crater breccias are found to be in general slightly more aluminous than breccias from the other stations at the Apollo 16 site. Analyses of eight Apollo 16 breccias cited in the literature range from 25% to 35% Al2O3. However, the North Ray Crater breccias are more clearly distinct from the other Apollo 16 breccias in their contents of lithophile trace elements.

Lindstrom, M. M.↗

Analysis of voltage data

The use of statistical analysis (regression analysis) to determine the data correlation between eight voltage parameters is discussed. The eight parameters correlated include: temperature, depth of discharge; charge rate; discharge rate; percent recharge; concentration of KOH; amount of KOH; and precharge. Graphs are presented which show: (1) starpoint/centerpoint cycles to failure vs. parameters; (2) cycles to failure vs. temperature; and (3) positive and negative plate thickness and weight vs. cycles. An empirical equation derived from cycles to failure vs. temperature graph for cells cycled at 1C charge, 2C discharge, and 14 percent recharge is also presented.

Mcdermott, P. P.↗

Prediction of composite thermal behavior made simple

A convenient procedure is described to determine the thermal behavior (thermal expansion coefficients and thermal stresses) of angleplied fiber composites using a pocket calculator. The procedure consists of equations and appropriate graphs for various ( + or - theta) ply combinations. These graphs present reduced stiffness and thermal expansion coefficients as functions of (+ or - theta) in order to simplify and expedite the use of the equations. The procedure is applicable to all types of balanced, symmetric fiber composites including interply and intraply hybrids. The versatility and generality of the procedure is illustrated using several step-by-step numerical examples.

Chamis, C. C.↗

Theory and applications of optimal control in aerospace systems

This AGARD graph addresses the advances effected in the theory and design of modern optimal guidance and control systems, in the following areas: Part I: Theory, Part II: Design Techniques, Part III: Applications and should provide an aid in the application of these modern techniques. This AGARD graph was prepared at the request of the Guidance and Control Panel of AGARD.

Pieter Kant↗

A graphics primer for English Teachers

Skills necessary for teaching graphics are addressed. A simple, step by step method of teaching students how to draw different types of graphs is presented. Each step is illustrated by a drawing. Some audience analysis for the determination of appropriateness of the use of different types of graphs is included.

Brillhart, L. V.↗

Prediction of composite hygral behavior made simple

A convenient procedure is described to determine the hygral behavior (moisture expansion coefficients and moisture stresses) of angleplied fiber composites using a pocket calculator. The procedure consists of equations and appropriate graphs for various (+ or - theta) ply combinations. These graphs present reduced stiffness and moisture expansion coefficients as functions of (+ or - theta) in order to simplify and expedite the use of the equations. The procedure is applicable to all types of balanced, symmetric fiber composites including interply and intraply hybrids. The versatility and generality of the procedure is illustrated using several step-by-step numerical examples.

Chamis, C. C.↗

Multispectral determination of soil moisture-2

Soil moisture data obtained using scatterometers, modular multispectral scanners and passive microwave radiometers were revised and grouped into four field cover types for statistical anaysis. Guymon data are grouped as alfalfa, bare, milo with rows perpendicular to the field view, and milo viewed parallel to the field of view. Dalhart data are grouped as bare combo, stubble, disked stubble, and corn field. Summary graphs combine selected analyses to compare the effects of field cover. The analysis for each of the cover types is presented in tables and graphs. Other tables show elementary statistics, correlation matrices, and single variable regressions. Selected eigenvectors and factor analyses are included and the highest correlating sensor typs for each location are summarized.

Estes, J. E.↗

OSS-1/contamination monitor

A 20-cm high, 18-cm wide, and 30-cm long (8x7x12 inch) box weighing about 7 kg (15 lbs) and consuming about 7 watts of power was carried on the OSS-1 pallet to monitor the mass build-up or accretion of condensible, volatile materials on surfaces in the shuttle bay during all phases of ascent, on-orbit, and descent. Passively thermally controlled, the box holds two witness samples and four actively temperature controlled quartz crystal microbalances (TQCM) whose temperature can vary from -60 C to +80 C. Graphs show the accretion indicated by the TQCM during the launch and early orbital phase. Conditions during tail to the Sun, nose to the Sun, and bay to the Sun attitudes of the shuttle during STS-3 are reflected in temperatures indicated by the OSS-1 thermistor. These temperatures influence outgassing rates of various materials as well as measurements made by the contamination monitor package. The parameters that bear on TQCM measurements data are shown in graphs and discussed.

Kruger, R.↗