Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “generative diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Random 3D Interpenetrating Electrode Design for Energy Storage Applications

We introduce the concept of random interpenetrating electrode structures, inspired by spinodal decomposition, as a transformative approach for energy storage applications. While ordered architectures, such as double gyroids and Kelvin cell structures, have long been favored for their structural uniformity and surface area utilization, we demonstrate that random structures offer distinct advantages including shorter diffusion pathways, higher packing density, and enhanced reaction kinetics, particularly at low temperatures. Using a combination of computational and electrochemical analysis, we show that random architecture outperforms their ordered counterparts in scenarios where diffusion dominates. This work represents the first systematic exploration of random structures in energy storage, highlighting their potential to overcome limitations of traditional designs. However, challenges such as structural reproducibility and scalability remain, necessitating further investigation into fabrication techniques and material selection. By establishing a framework to optimize random electrode architectures, we provide critical insights into the interplay between geometry, diffusion, and reaction kinetics. This study not only introduces a new design principle for 3D electrodes but also opens pathways for next-generation energy storage systems that demand both high performance and adaptability to a range of operating conditions.

Materials science↗

Optimizing energy yield of monolithic perovskite/silicon tandem solar cells in real-world Conditions: The impact of luminescent coupling

Efficient light management is key to maximizing power conversion efficiency (PCE) in monolithic perovskite/silicon tandem solar cells. Achieving peak efficiency requires closely matched current generation in all junctions, especially in integrated configurations. However, real-world conditions vary significantly due to factors such as sunlight spectrum, diffuse-to-direct sunlight ratio, angular distribution of light, subcell temperature coefficients, and ground reflection. This study introduces a comprehensive optical and device simulation to optimize perovskite/silicon tandem cells, considering experimental luminescent coupling (LC) efficiency and its dependence on working conditions, alongside variations in radiative recombination, effect of temperature on absorptivity spectra, and cloud cover. Our results show potential energy yield improvements of up to 1.4 % with LC, based on current perovskite radiative recombination records, and up to 4 % with direct bandgap materials. Although radiative recombination's dependence on excitation intensity reduces output power and requires thicker absorbers, LC compensates for these losses. LC also lowers the optimized bandgap for the perovskite top cell from 1.72 eV to 1.64–1.68 eV, or even lower in regions with redshifted irradiance. Additionally, optimization revealed that thinner silicon bottom cells require a higher perovskite top cell bandgap, impacting the balance between fabrication cost and cell stability.

14 SOLAR ENERGY↗

Nucleation Selectivity and Lateral Coalescence of GaAs over Graphene on Ge(111)

Here we use epitaxial lateral overgrowth (ELO) to produce semimetallic graphene nanostructures embedded in a semiconducting GaAs matrix for potential applications in plasmonics, THz generation and detection, and tunnel junctions in multijunction solar cells. We show that (1) the combination of low sticking coefficient and fast surface diffusion on graphene enhances nucleation selectivity at exposed regions of the substrate and (2) high growth temperatures favor efficient lateral overgrowth, coalescence, and planarization of epitaxial GaAs films over the graphene nanostructures. Our work provides a more complete understanding of ELO using graphene masks, as opposed to more conventional dielectric masks, and enables new types of metal/semiconductor nanocomposites.

36 MATERIALS SCIENCE↗

In crystallo organometallic chemistry

X-ray crystallography is an invaluable tool in design and development of organometallic catalysis, but application typically requires species to display sufficiently high solution concentrations and lifetimes for single crystalline samples to be obtained. In crystallo organometallic chemistry relies on chemical reactions that proceed within the single-crystal environment to access crystalline samples of reactive organometallic fragments that are unavailable by alternate means. Furthermore, this highlight describes approaches to in crystallo organometallic chemistry including (a) solid–gas reactions between transition metal complexes in molecular crystals and diffusing small molecules, (b) reactions of organometallic complexes within the extended lattices of metal–organic frameworks (MOFs), and (c) intracrystalline photochemical transformations to generate reactive organometallic fragments. Application of these methods has enabled characterization of catalytically important transient species, including σ-alkane adducts of transition metals, metal alkyl intermediates implicated in metal-catalyzed carbonylations, and reactive M–L multiply bonded species involved in C–H functionalization chemistry. Opportunities and challenges for in crystallo organometallic chemistry are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cryo-EM structure of the Rhodospirillum rubrum RC–LH1 complex at 2.5 Å

The reaction centre light-harvesting 1 (RC–LH1) complex is the core functional component of bacterial photosynthesis. We determined the cryo-electron microscopy (cryo-EM) structure of the RC–LH1 complex from Rhodospirillum rubrum at 2.5 Å resolution, which reveals a unique monomeric bacteriochlorophyll with a phospholipid ligand in the gap between the RC and LH1 complexes. The LH1 complex comprises a circular array of 16 αβ-polypeptide subunits that completely surrounds the RC, with a preferential binding site for a quinone, designated Q P , on the inner face of the encircling LH1 complex. Quinols, initially generated at the RC Q B site, are proposed to transiently occupy the Q P site prior to traversing the LH1 barrier and diffusing to the cytochrome bc 1 complex. Thus, the Q P site, which is analogous to other such sites in recent cryo-EM structures of RC–LH1 complexes, likely reflects a general mechanism for exporting quinols from the RC–LH1 complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the room-temperature phase diagram of high pressure hydrogen: An ab initio molecular dynamics perspective and a diffusion Monte Carlo study

The finite-temperature phase diagram of hydrogen in the region of phase IV and its neighborhood was studied using the ab initio molecular dynamics (MD) and the ab initio path-integral molecular dynamics (PIMD). The electronic structures were analyzed using the density-functional theory (DFT), the random-phase approximation, and the diffusion Monte Carlo (DMC) methods. Taking the state-of-the-art DMC results as benchmark, comparisons of the energy differences between structures generated from the MD and PIMD simulations, with molecular and dissociated hydrogens, respectively, in the weak molecular layers of phase IV, indicate that standard functionals in DFT tend to underestimate the dissociation barrier of the weak molecular layers in this mixed phase. Because of this underestimation, inclusion of the quantum nuclear effects (QNEs) in PIMD using electronic structures generated with these functionals leads to artificially dissociated hydrogen layers in phase IV and an error compensation between the neglect of QNEs and the deficiencies of these functionals in standard ab initio MD simulations exists. This analysis partly rationalizes why earlier ab initio MD simulations complement so well the experimental observations. The temperature and pressure dependencies for the stability of phase IV were also studied in the end and compared with earlier results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design of anti-ring back reflectors for thin-film solar cells based on three-dimensional optical and electrical modeling

The optical and electrical properties of a photonic-plasmonic nanostructure on the back contact of thin-film solar cells were investigated numerically through the three-dimensional (3D) finite-difference time-domain method and the 3D Poisson and drift-diffusion solver. The focusing effect and the Fabry-Perot resonances are identified as the main mechanisms for the enhancement of the optical generation rate as well as the short circuit current density. However, the surface topography of certain nanopattern structures is found to reduce the internal electrostatic field of the device, thus limiting charge collection. The optimized conditions for both optics and electronics have been analyzed in this paper.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Role of electron correlation on the adenine dimer interaction for non-equilibrium geometries: a benchmark Quantum Monte Carlo study

The accurate description of non-covalent interactions is critical for understanding the structure, dynamics, and eventual function of biomolecules. The adenine dimer serves as a benchmark system for computational methods due to its role in nucleic acid structures and its rich conformational landscape. In this study, we employ benchmark diffusion quantum Monte Carlo (DMC) methods to investigate the relative energies and role of electron correlation on a set of adenine dimer conformations generated via a search of the potential energy landscape using the global optimizer algorithm. Relative DMC energies are compared against a wide range of density functional theory (DFT) approximation results. We find that although most of the DFT functionals perform well for low-energy structures, their accuracy varies significantly for higher-energy conformations, including stacked and T-shaped structures. A large fraction of the variation is due to the treatment of the van der Waals interaction. BLYP, B3LYP, and PBE0 significantly improve with added D4 dispersion, while the recent r2SCAN-D4 and ωB97M-V functionals show the least scatter and closest agreement with the DMC. These findings highlight the delicate nature of these interactions in biomolecular systems and provide guidance for simulations of their structure and dynamics and for the development of machine learned interatomic potentials.

Washburn, Laurel [ORNL] (ORCID:0000000324179335)↗

COLLISIONALLY BORN FAMILY ABOUT 87 SYLVIA

There are currently more than 1000 multi-opposition objects known in the Cybele population, adjacent and exterior to the asteroid main belt, allowing a more detailed analysis than was previously possible. Searching for collisionally born clusters in this population, we find only one statistically robust case: a family of objects about (87) Sylvia. We use a numerical model to simulate the Sylvia family long-term evolution due to gravitational attraction from planets and thermal (Yarkovsky) effects and to explain its perturbed structure in the orbital element space. This allows us to conclude that the Sylvia family must be at least several hundreds of million years old, in agreement with evolutionary timescales of Sylvia's satellite system. We find it interesting that other large Cybele-zone asteroids with known satellites-(107) Camilla and (121) Hermione-do not have detectable families of collisional fragments about them (this is because we assume that binaries with large primary and small secondary components are necessarily impact generated). Our numerical simulations of synthetic clusters about these asteroids show they would suffer a substantial dynamical depletion by a combined effect of diffusion in numerous weak mean-motion resonances and Yarkovsky forces provided their age is close to {approx}4 billion years. However, we also believe that a complete effacement of these two families requires an additional component, very likely due to resonance sweeping or other perturbing effects associated with the late Jupiter's inward migration. We thus propose that both Camilla and Hermione originally had their collisional families, as in the Sylvia case, but they lost them in an evolution that lasted a billion years. Their satellites are the only witnesses of these effaced families.

79 ASTRONOMY AND ASTROPHYSICS↗

SATURATION OF THE MAGNETO-ROTATIONAL INSTABILITY IN STRONGLY RADIATION-DOMINATED ACCRETION DISKS

The saturation level of the magneto-rotational instability (MRI) in a strongly radiation-dominated accretion disk is studied using a new Godunov radiation MHD code in the unstratified shearing box approximation. Since vertical gravity is neglected in this work, our focus is on how the MRI saturates in the optically thick mid-plane of the disk. We confirm that turbulence generated by the MRI is very compressible in the radiation-dominated regime, as found by previous calculations using the flux-limited diffusion approximation. We also find little difference in the saturation properties in calculations that use a larger horizontal domain (up to four times the vertical scale height in the radial direction). However, in strongly radiation pressure dominated disks (one in which the radiation energy density reaches {approx}1% of the rest mass energy density of the gas), we find that Maxwell stress from the MRI turbulence is larger than the value produced when radiation pressure is replaced with the same amount of gas pressure. At the same time, the ratio between Maxwell stress and Reynolds stress is increased by almost a factor of eight compared with the gas pressure dominated case. We suggest that this effect is caused by radiation drag, which acts like bulk viscosity and changes the effective magnetic Prandtl number of the fluid. Radiation viscosity significantly exceeds both the microscopic plasma viscosity and resistivity, ensuring that radiation-dominated systems occupy the high magnetic Prandtl number regime. Nevertheless, we find that radiative shear viscosity is negligible compared to the Maxwell stress and Reynolds stress in the flow. This may have important implications for the structure of radiation-dominated accretion disks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ultra-High-Performance Concrete And Advanced Manufacturing Methods For Modular Construction

Small modular reactors (SMR) allow for less onsite construction, increase nuclear material security, and provide a flexible and cost-effective energy alternative. SMR can be factory-built as modular components, and shipped to desired locations for fast assembly. This project successfully developed a new class of ultra-high performance concrete (UHPC), which features a compressive strength greater than 22 ksi (150 MPa) without special treatment and self-consolidating characteristics desired for SMR modular construction. With an ultra-high strength and dense microstructure, it will facilitate rapid construction of steel plate-concrete (SC) beams and walls with thinner and lighter modules, and can withstand harsh environments and mechanical loads anticipated during the service life of nuclear power plants. In addition, the self-consolidating characteristics are crucial for the fast construction and assembly of SC modules with reduced labor costs and improved quality. Following the UHPC material development, the capacity of producing self-consolidating UHPC in mass quantities was investigated and compared to accepted self-consolidating concrete standards. With slightly adjusted mixing procedure using large-scale gravity-based mixers (compared with small-scale force-based mixer), the self-consolidating UHPC has been successfully processed at six cubic yards; the product met both minimum compressive strength requirements and self-consolidating concrete standards. Steel plate-UHPC beams (15 ft. long, 12 in. wide and 16 in. deep) and wall panels (40 in. X 40 in. X 3 in.) were then constructed using the self-consolidating UHPC without any external vibration. Quality control guidelines for producing UHPC in large scale were developed. When the concrete is replaced by UHPC in a steel plate concrete (SC) beam, it is critical to evaluate its structural behavior with both flexure and shear-governed failure modes. In recent years, SC has been widely used for buildings and nuclear containment structures to resist lateral forces induced by severe earthquakes and heavy winds. SC modules have good potential for SMR because of their cost-effectiveness and reduced construction time. However, the minimum shear reinforcement (i.e. cross tie) ratio needs to be determined for the steel plate-UHPC (S-UHPC) beams to exhibit a ductile failure mode. In this project, S-UHPC beams were designed and constructed. The beams were tested to evaluate structural capacity and identify the minimum cross ties ratios. In addition, as the bond between UHPC and steel plate is essential for ensuring structural integrity under shear and flexure, it was measured and examined in this project through digital image correlation system and smart piezoelectric aggregate sensors. Large-scale testing and finite element simulation were also performed on S-UHPC wall panels. New bond slip-based constitutive models of steel plate were developed for S-UHPC, which were used in finite element analysis program to predict S-UHPC behavior under shear. The results were well validated through experimental data. The long-term durability of UHPC were established in this project. UHPC specimens were tested under free shrinkage, restrained shrinkage, elevated temperature, water permeation, chloride diffusion, corrosion, and alkali silica reaction. UHPC has demonstrated significantly improved durability compared with control concrete specimens. This research led to a new generation of steel plate-UHPC modules for SMR that can provide large benefits to the electric power industry. Taking advantage of the high strength and durability of UHPC, their modularity and ease of assembly can address the high cost barriers of typical nuclear power plants.

42 ENGINEERING↗

Simulating the CMS High Granularity Calorimeter with ML

Detector simulation is a key component of physics analysis and related activities in CMS. In the upcoming High Luminosity LHC era, simulation will be required to use a smaller fraction of computing in order to satisfy resource constraints. At the same time, CMS will be upgraded with the new High Granularity Calorimeter (HGCal), which requires significantly more resources to simulate than the existing CMS calorimeters. This computing challenge motivates the use of generative machine learning models as surrogates to replace full physics-based simulation. We study the application of state-of-the-art diffusion models to simulate particle showers in the CMS HGCal. We will discuss methods to overcome the challenges posed by the high-dimensional, irregular geometry of the HGCal. The quality of the showers produced by the diffusion model will be assessed by comparison to the full GEANT4-based simulation. The increase in simulation throughput will be quantified and methods to accelerate the diffusion model inference will also be discussed.

Amram, Oz↗

Convection and magnetic fields in an atmosphere with constant temperature gradient. II - The supergranules and magnetic fields

The hydrodynamic properties of convective motions in a stratified atmosphere suggest that the supergranules in the solar photosphere extend to depths in excess of their horizontal diameters. The calculations presented here show that the weak fields which appear at the photosphere are as strong as, or stronger than, the horizontal fields anywhere in the supergranules below the surface. Hence the general 10 to 100 gauss azimuthal field of the sun, whose presence is indicated by the emerging bipolar magnetic regions, must lie below the base of the supergranules, i.e., below a depth probably of the order of 20,000 to 50,000 km. Presumably then the azimuthal field is generated by nonuniform rotation below the supergranule convection and does not appear in the supergranule layer because of the high rate of turbulent diffusion loss from that layer.

Parker, E. N.↗

Bent crystal X-ray topography

A television X-ray topographic camera system was constructed. The system differs from the previous system in that it incorporates the X-ray TV imaging system and has a semi-automatic wafer loading system. Also the X-ray diffraction is in a vertical plane. This feature makes wafer loading easier and makes the system compatible with any commercial X-ray generating system. Topographs and results obtained from a study of the diffraction contrast variation with impurity concentration for both boron implanted and boron diffused silicon are included.

Parker, D. L.↗

Excitation of turbulence by density waves

A nonlinear system describes the microdynamical state of turbulence that is excited by density waves. It consists of an equation of propagation and a master equation. A group-scaling generates the scaled equations of many interacting groups of distribution functions. The two leading groups govern the transport processes of evolution and eddy diffusivity. The remaining sub-groups represent the relaxation for the approach of diffusivity to equilibrium. In strong turbulence, the sub-groups disperse themselves and the ensemble acts like a medium that offers an effective damping to close the hierarchy. The kinetic equation of turbulence is derived. It calculates the eddy viscosity and identifies the effective damping of the assumed medium self-consistently. It formulates the coupling mechanism for the intensification of the turbulent energy at the expense of the wave energy, and the transfer mechanism for the cascade. The spectra of velocity and density fluctuations find the power law k sup-2 and k sup-4, respectively.

Tichen, C. M.↗

The kinetics of the Au-InP interaction

An analysis of the reaction of Au and Au-In alloys with InP has permitted the identification of the mechanisms occurring during the first two stages of the Au-InP interaction. The first stage of the interaction, during which the Au is converted to a saturated Au (In) solution, is controlled by the vacancy-generation rate at the free surface of the metallization. The activation energy for this process is the activation energy for Au self-diffusion. Evidence is presented for the existence of large localized variations in this value due to surface related effects. At the completion of stage I stage II becomes active and continues until the metallization is converted to Au3In. This process, proceeding via an interstitial interchange mechanism, is many orders of magnitude slower than stage I. The rate-limiting step, with an activation energy of 2.8 eV, is shown to be the diffusion of In from the InP-metal interface. The P atoms that are released when In enters the metallization during stage I leave the system without reacting, whereas in stage II they form a compound (Au2P3) at the InP-metal interface. The presence of the Au2P3 severely retards the stage II interaction rate.

Fatemi, Navid S.↗

Microelectrode-based technology for the detection of low levels of bacteria

A microelectrode-based electrochemical detection method was used for quantitation of bacteria in water samples. The redox mediator, benzoquinone, was used to accept electrons from the bacterial metabolic pathway to create a flow of electrons by reducing the mediator. Electrochemical monitoring electrodes detected the reduced mediator as it diffused out of the cells and produced a small electrical current. By using a combination of microelectrodes and monitoring instrumentation, the cumulative current generated by a particular bacterial population could be monitored. Using commercially available components, an electrochemical detection system was assembled and tested to evaluate its potential as an emerging technology for rapid detection and quantitation of bacteria in water samples.

Rogers, Tom D.↗