Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “experimental data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Online Detection of Inter-Turn Winding Faults in Single-Phase Distribution Transformers Using Smart Meter Data

Turn-to-turn faults between primary windings due to insulation degradation are a major cause of distribution transformer failure, and occur due to high levels of stress such as overloading and overheating. An additional consequence of these faults is an increased voltage on the transformer secondary due to effective change in turns ratio. This paper develops a novel method for early detection of insulation degradation and subsequent inter-turn winding failure by monitoring the transformer secondary voltage. The algorithm is based on a cumulative sum (CUSUM) statistic and compares voltages on neighbouring transformers to flag degrading assets. Results obtained from simulation as well as experimental data show that smart meter measurements can be utilized to achieve very high detection accuracy while keeping costs low. Here, the paper also demonstrates the validity of the algorithm in the presence of measurement noise, residential solar power injection etc.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Nanostructure Scaling in Semi-Dilute Triblock Copolymer Gels

Here, there is a considerable body of work that describes the scaling of diblock copolymer micelle dimensions in dilute and semi-dilute solution based upon block degrees of polymerization and copolymer concentration. However, there is a lack of analogous information for semi-dilute ABA triblock copolymer gels, which consist of ABA triblock copolymer dissolved in midblock-selective (B-selective) solvent. The present study uses small angle X-ray scattering to extract micelle dimensions for numerous triblock copolymer gels that vary in copolymer identity (and hence block lengths) and copolymer concentration, as well as gels that contain various ratios of two unique triblock copolymers. Analysis of micelle structural data subsequently translates to universal scaling expressions for the micelle core radius – r A ≈ N A 0.53 N B -0.14 $\phi$ ABA 0.16 where N A and N B are the endblock and midblock degrees of polymerization, respectively, and $\phi$ ABA is the volume fraction of triblock copolymer in the gel – and for the intermicelle spacing – l AA ≈ N A 0.09 N B 0.29 $\phi$ ABA -0.35 . Each scaling expression describes the full collection of experimental data very well. Additionally, these scaling expressions are partially in line with expectations from semi-dilute diblock copolymer solution theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Synthetic modeling of soft x-ray emissivity for magnetic island analysis in LTX-β

We present a synthetic soft x-ray (SXR) forward-modeling framework that characterizes the emissivity structure of rotating magnetic islands in the Lithium Tokamak eXperiment-β across space and time. Magnetic islands associated with tearing modes produce modulations in line-integrated SXR brightness. Traditional tomographic methods struggle to resolve these structures in devices with limited sightlines, resulting in an under-determined inversion problem, or otherwise necessitate equilibrium reconstruction data, preventing their use in active control. Our approach removes this challenge by combining a fully three-dimensional ray-tracing model with a time-dependent emissivity prescription of a $m/n$ = 2/1 magnetic island. The model is validated through helical island geometry, rotation measured by magnetic diagnostics, and equilibrium constraints from PSI-Tri reconstructions. Synthetic brightness signals are generated for each photodiode sightline from a modeled emissivity profile and directly compared with experimental data from a tangential midplane SXR array. By fitting the synthetic diagnostic output to the observed brightness across time, we simultaneously infer key geometric parameters-such as island radial location, island width, and rotation frequency-without requiring full tomographic reconstruction, all with an average absolute deviation of less than 3%. This work demonstrates that forward modeling with a single tangential array can extract key island parameters in a spherical tokamak, providing a computationally efficient alternative to conventional SXR tomography and providing a pathway toward real-time magnetic-island characterization in future devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Dynamical System Scaling of a Thermocline Thermal Storage System in the Thermal Energy Distribution System (TEDS) Facility

The purpose of this study was to develop a process to convert input signals from one facility into another by reflecting geometric and environmental settings. The Dynamic Energy Transport and Integration Laboratory (DETAIL) is one facility in development that aims to emulate the daily interactions among power production industry systems and be capable of receiving real-time data from those systems as inputs. To convert signals and ensure that the temporal sequences and magnitudes reflect the laboratory settings, the ability to scale and project data is essential. To demonstrate this ability, Dynamical System Scaling (a methodology that enables systems to scale and project or extrapolate datasets to desired environments while conserving the observed transient behavior based on first principles) was applied to DETAIL’s thermocline thermal storage system in the Thermal Energy Distribution System. The thermocline system was successfully scaled and a test case was conducted to generate a doubly accelerated energy charge and discharge in reference to past experimental data from the facility. The accelerated data were determined as able to conserve the amount of energy stored and the associated test boundary conditions were charge line maximum temperature, charge line velocity, and thermocline maximum temperature at 354 °C, 0.458 m/s, and 418 °C, respectively. The research results represented a case that required signals to be accelerated without altering the stored energy.

Yoshiura, Ramon (ORCID:0000000319781313)↗
DOE OSTI2023

Physics model validation of propane and methane for Hydrogen Plus Other Alternative Fuels Risk Assessment Models (HyRAM+)

HyRAM+ is a toolkit that includes fast-running models for the unconstrained (i.e., no wall interactions) dispersion and flames for non-premixed fuels. The models were developed for use with hydrogen, but the toolkit was expanded to include propane and methane in a recent release. Here, in this work we validate the dispersion and flame models for these additional fuels, based on reported literature data. The validation efforts spanned a range of release conditions, from subsonic to underexpanded jets and flames for a range of mass flow rates. In general, the dispersion model works well for both propane and methane although the width of the jet/plume is predicted to be wider than observed in some cases. The flame model tends to over-predict the induced buoyancy for low-momentum flames, while the radiative heat flux agrees with the experimental data reasonably well, for both fuels. The models could be improved but give acceptable predictions for propane and methane behavior for the purposes of risk assessment.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2019

A Review on Lignin Liquefaction: Advanced Characterization of Structure and Microkinetic Modeling

Lignin liquefaction microkinetics is a move toward a more first principles (i.e., ab initio) based understanding at the molecular level in reaction engineering. While the microkinetic modelling of reactions to obtain kinetic rate parameters of chemical reactions have been widely used in the field of gas phase combustion and heterogeneous catalysis, this approach has not been as thoroughly developed in the area of biomass thermochemical reactions (e.g., lignin pyrolysis, hydrothermal liquefaction). The difficulties in establishing the structure of complex heterogeneous materials, like lignin, is perhaps the main challenge in developing rational microkinetic descriptions of biomass thermochemical reactions. In this manuscript we review the current state of the art and the challenges to develop microkinetic models for lignin liquefaction technologies (e.g., pyrolysis, hydrothermal liquefaction, solvolysis). A general strategy for the development of microkinetic models for lignin liquefaction technologies is discussed. Here, the first hurdle is to obtain sufficiently rich experimental data of lignin underlying polymeric structure and methodologies to use this data to build realistic lignin structural representations. Some analytical techniques for lignin structural characterization and their associated data, as well as a correlation for calculating the degree of macromolecular lignin branching are discussed. The presence of small lignin oligomeric structures and the role of these structures in lignin pyrolysis is also addressed. The ways in which elementary deconstruction and repolymerization reactions occur within this structure to form a liquid intermediate, and how these deconstruction products continue to interact with each other until they are removed from the liquid intermediate is thoroughly discussed. Further, experimental work with model compounds and the effect of reaction parameters (e.g., temperature, pressure, vapor residence time) are reviewed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

AI-enabled Lorentz microscopy for quantitative imaging of nanoscale magnetic spin textures

The manipulation and control of nanoscale magnetic spin textures are of rising interest as they are potential foundational units in next-generation computing paradigms. Achieving this requires a quantitative understanding of the spin texture behavior under external stimuli using in situ experiments. Lorentz transmission electron microscopy (LTEM) enables real-space imaging of spin textures at the nanoscale, but quantitative characterization of in situ data is extremely challenging. Here, we present an AI-enabled phase-retrieval method based on integrating a generative deep image prior with an image formation forward model for LTEM. Our approach uses a single out-of-focus image for phase retrieval and achieves significantly higher accuracy and robustness to noise compared to existing methods. Furthermore, our method is capable of isolating sample heterogeneities from magnetic contrast, as shown by application to simulated and experimental data. This approach allows quantitative phase reconstruction of in situ data and can also enable near real-time quantitative magnetic imaging.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Magnetic moments and spin structure in single-phase B20 Co 1+x Si 1-x (x = 0.043)

Neutron powder diffraction (NPD) and x-ray magnetic circular dichroism (XMCD) spectroscopy are employed to investigate the magnetism and spin structure in single-phase B20 Co 1.043 Si 0.957 . The magnetic contributions to the NPD data measured in zero fields are consistent with the helical order among the allowed spin structures derived from group theory. The magnitude of the magnetic moment is (0.3 ± 0.1) μ B /Co according to NPD, while the surface magnetization probed by XMCD at 3 kOe is (0.18–0.31) μ B /Co. Both values are substantially larger than the bulk magnetization of 0.11 μ B /Co determined from magnetometry at 70 kOe and 2 K. Finally, these experimental data indicate the formation of a helical spin phase and the associated conical states in high magnetic fields.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Numerical Simulation and Experimental Comparison of System Analysis Module 1D Mixing Model for Cold Shock Transients in the Gallium Thermal-Hydraulic Mixing Facility

Abstract Liquid metals are being investigated as coolants in many advanced reactor designs because of their high thermal conductivity and effectiveness at high temperatures. However, they often pose challenges to reactor operation and safety because of the complex thermal mixing and stratification in the plenum of pool-type reactor designs. The advanced system analysis code System Analysis Module (SAM) currently under development at Argonne National Laboratory aims to develop and implement thermal mixing models to accurately capture these complex thermal fluid behaviors. In this study, the SAM thermal mixing model was compared against experimental data from the Gallium Thermal-Hydraulic Experiment facility, a scaled liquid metal test facility that uses gallium as a surrogate fluid to investigate the stratification and thermal mixing of low-Prandtl-number fluids in the upper plenum of a liquid metal-cooled reactor. Two cold shock transient cases were used: one with stable stratified flow (Ri = 32) and one with stronger thermal mixing (Ri = 0.5). The resultant temperatures were then compared with the experimental temperatures over the entire plenum to assess the ability of the mixing models to capture the thermal behavior and to better correspond mixing parameters to various flow scenarios. Generally, the zero-dimensional mixing model was more capable of capturing the bulk temperature of the component modeled assuming that an accurate mass flow rate was provided, but it was inherently unable to capture thermal gradients in space. The one-dimensional mixing model was capable of capturing that the thermal gradients provided accurate selection of the mixing coefficients. Further, the temperature at the outlet junction was compared over time for each of the mixing models with the recorded experimental temperature. The implemented mixing models demonstrated the ability to effectively capture the overall thermal behavior for stronger mixing scenarios but struggled with more stably stratified flows. It was found that a system analysis code's covering of the entire range of different operating conditions still remains a challenging task, and it is suggested that further model and closure improvements are necessary to accurately capture complex thermal mixing and stratification phenomena.

stratification↗
DOE OSTI2021

Updates to Improve the Evaluated Nuclear Data of Copper Isotopes in the Resolved and Unresolved Resonance Regions

The evaluated nuclear data of the 63,65 Cu isotopes have been updated in the resolved and unresolved resonance energy regions with the goal of improving the fidelity between calculated and measured critical benchmarks. Particular focus was devoted to the 63 Cu(n, γ) cross sections because of their large sensitivity to the reactivity in the benchmark calculations. By focusing on these cross sections, the set of parameters in both resolved and unresolved resonance regions were fitted to available experimental data. The newly updated evaluations were compared to the currently available ENDF/B-VIII.0 evaluations in reactivity calculations for copper-sensitive integral benchmarks. An initial study of the sensitivity of the benchmarks to the angular distributions was performed, finding it necessary to describe the angular distributions more accurately above 100 keV. This investigation uncovered the need for more accurate data for the 63 Cu(n, γ) cross section above 100 keV. An increase in the capture cross section was found to improve agreement for the considered benchmarks.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Transverse momentum fluctuations and their correlation with elliptic flow in nuclear collision

In this article, we propose observables v 0 and v 0 (p T ) which quantify the relative fluctuations in the total transverse momentum at fixed multiplicity. We first study the factorization of the fixed multiplicity momentum dependent two particle correlation function into a product of v 0 ($p^{a}_{T}$) and v 0 ($p^{b}_{T}$) within realistic hydrodynamic simulations. Then we present computations of v 0 (p T ) for different particle types. We determine the relation between the integrated v 0 and previously measured observables, and compare results from a hybrid hydrodynamics based model to experimental data. The effects of bulk viscosity and an initial pre-equilibrium stage on the results are quantified. We find that v 0 is strongly correlated with the initial state entropy per elliptic area, S/A. Using this result, we explain how the observed correlations between the elliptic flow and the transverse momentum (both in simulations and experiment) reflect the initial state correlations between 1/A and ellipticity ε 2 at fixed multiplicity. Furthermore, we argue that the systematic experimental study of v 0 , with the same sophistication as used for the other v n , can contribute significantly to our understanding of quark gluon plasma properties.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Understanding protein-complex assembly through grand canonical maximum entropy modeling

Inside a cell, heterotypic proteins assemble in inhomogeneous, crowded systems where the abundance of these proteins vary with cell types. While some protein complexes form putative structures that can be visualized with imaging, there are far more protein complexes that are yet to be solved because of their dynamic associations with one another. Nevertheless, it is possible to infer these protein complexes through a physical model. However, it is often not clear to physicists what kind of data from biology is necessary for such a modeling endeavor. Here, we aim to model these clusters of coarse-grained protein assemblies from multiple subunits through the constraints of interactions among the subunits and the chemical potential of each subunit. We obtained the constraints on the interactions among subunits from the known protein structures. We inferred the chemical potential that dictates the particle number distribution of each protein subunit from the knowledge of protein abundance from experimental data. Guided by the maximum entropy principle, we formulated an inverse statistical mechanical method to infer the distribution of particle numbers from the data of protein abundance as chemical potentials for a grand canonical multicomponent mixture. Using grand canonical Monte Carlo simulations, we captured a distribution of high-order clusters in a protein complex of succinate dehydrogenase with four known subunits. The complexity of hierarchical clusters varies with the relative protein abundance of each subunit in distinctive cell types such as lung, heart, and brain. When the crowding content increases, we observed that crowding stabilizes emergent clusters that do not exist in dilute conditions. We, therefore, proposed a testable hypothesis that the hierarchical complexity of protein clusters on a molecular scale is a plausible biomarker of predicting the phenotypes of a cell.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Three-dimensional reconstruction of x-ray emission volumes in magnetized liner inertial fusion from sparse projection data using a learned basis

The ability to visualize x-ray and neutron emission from fusion plasmas in 3D is critical to understand the origin of the complex shapes of the plasmas in experiments. Unfortunately, this remains challenging in experiments that study a fusion concept known as Magnetized Liner Inertial Fusion (MagLIF) due to a small number of available diagnostic views. Here, we present a basis function-expansion approach to reconstruct MagLIF stagnation plasmas from a sparse set of x-ray emission images. A set of natural basis functions is “learned” from training volumes containing quasi-helical structures whose projections are qualitatively similar to those observed in experimental images. Tests on several known volumes demonstrate that the learned basis outperforms both a cylindrical harmonic basis and a simple voxel basis with additional regularization, according to several metrics. Two-view reconstructions with the learned basis can estimate emission volumes to within 11% and those with three views recover morphology to a high degree of accuracy. The technique is applied to experimental data, producing the first 3D reconstruction of a MagLIF stagnation column from multiple views, providing additional indications of liner instabilities imprinting onto the emitting plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Near-continuum, hypersonic oxygen flow over a double cone simulated by direct simulation Monte Carlo informed from quantum chemistry

A large-scale, fully resolved direct simulation Monte Carlo (DSMC) computation of a non-equilibrium, reactive flow of pure oxygen over a double cone is presented. Under the simulated near-continuum conditions, the computational demands are shown to be significant because of the wide range of length scales that must be resolved. Therefore, robust grid adaption capabilities and efficient parallelization of the Stochastic PArallel Rarefied-gas Time-accurate Analyzer (SPARTA) code that is utilized in this work are essential. The thermochemical and transport collision models were selected for efficiency and simplicity. First-principles data, obtained from the highly accurate direct molecular simulation method, were used to inform the collision models’ parameters. Importantly, because SPARTA implements molecular collision models using collision-specific energies, the resulting macroscopic relaxation rates were evaluated a posteriori via zero-dimensional heat bath simulations. The comparisons of surface properties, namely heat flux and pressure, show very close agreement with previous computational fluid dynamics (CFD) results. Differences with the measurements were found to be similar to the CFD simulations. The unresolved discrepancy with the measurements could be due to inconsistent free stream conditions with the actual experimental data or missing physical phenomena altogether, for example atomic and molecular oxygen electronically excited states, three-dimensional effects, or more complex gas–surface interactions. As shown in this work, the advantages of obtaining a DSMC particle solution for these flows reside in the method's ability to be directly informed from first principles and to seamlessly describe internal energy non-equilibrium for all modes. With the advent of exascale computing and beyond, particle methods will be an increasingly important tool to verify the validity of physical assumptions in reduced-order models via fully resolved, experimental-scale simulations, down to the level of molecular-level distributions.

Mechanics↗
DOE OSTI2023

A thermodynamic explanation of the Invar effect

The anomalously low thermal expansion of Fe–Ni Invar has long been associated with magnetism, but to date, the microscopic underpinnings of the Invar behaviour have eluded both theory and experiment. Here we present nuclear resonant X-ray scattering measurements of the phonon and magnetic entropies under pressure. By applying a thermodynamic Maxwell relation to these data, we obtain the separate phonon and magnetic contributions to thermal expansion. We find that the Invar behaviour stems from a competition between phonons and spins. In particular, the phonon contribution to thermal expansion cancels the magnetic contribution over the 0–3 GPa pressure range of Invar behaviour. At pressures above 3 GPa, the cancellation is lost, but our analysis reproduces the positive thermal expansion measured separately by synchrotron X-ray diffractometry. Ab initio calculations informed by experimental data show that spin–phonon interactions improve the accuracy of this cancellation over the range of Invar behaviour. Further, spin–phonon interactions also explain how different phonon modes have different energy shifts with pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Deep learning based x-ray spectrometer for high repetition rate characterization of betatron radiation

Betatron radiation produced from a laser-wakefield accelerator is a broadband, hard x-ray (>1 keV) source that has been used in a variety of applications in medicine, engineering, and fundamental science. Further development and optimization of stable, high repetition rate (HRR) (>1 Hz) betatron sources will provide a means to extend their application base to include single-shot dynamical measurements of ultrafast processes or dense materials. Recent advances in laser technology used in such experiments have enabled increases in shot-rate and system stability, providing improved statistical analysis and detailed parameter scans. However, unique challenges exist at high repetition rate, where data throughput and source optimization are now limited by diagnostic acquisition rates and analysis. Here, we present the development of a machine-learning algorithm for the real-time analysis of betatron radiation. We report on the fielding of this deep learning algorithm for online source characterization at the Institut National de la Recherche Scientifique's Advanced Laser Light Source. By fine-tuning an algorithm originally trained on a fully synthetic dataset using a subset of experimental data, the algorithm can predict the betatron critical energy with a percent error of 7.2 % with a reconstruction time of 1.5 ms, providing a valuable tool for real-time, multi-objective optimization at HRR.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Data-driven Detection and Early Prediction of Thermoacoustic Instability in a Multi-nozzle Combustor

Thermoacoustic instability (TAI) is a critical issue in modern lean-burn gas-turbine combustors, which is induced by a strong coupling between the resonant combustor acoustics and fluctuations in the heat release rate. This instability may lead to high-amplitude pressure waves that generate undesirable noise levels as well as fatigue stresses in mechanical structures of the combustor. The intense pressure fluctuations due to TAI may also cause large flow perturbations and possibly flow reversal that may lead to flame oscillations, flame liftoff, and even flame blow-out. Hence, there is a strong need for exercising control actions in a timely fashion to mitigate the TAI phenomena. Anomaly detection is an essential prerequisite to the design of a good controller and such a detector must be able to reliably predict a forthcoming TAI. To detect and predict the onset of a TAI from an ensemble of pressure time series, this paper investigates three data-driven methods: Fast Fourier transform (FFT), symbolic time series analysis (STSA), and hidden Markov modeling (HMM). The main focus of the paper is to make a comparative evaluation of these three anomaly detection methods for classification of the current regime of operation into stable and unstable categories as well as for real-time identification of precursors to impending instabilities with short-length time series of measured variables (e.g., pressure oscillations). Finally, the results, generated on experimental data from a multi-nozzle combustor apparatus, have been compared to evaluate the performance of FFT, STSA, and HMM methods for TAI analysis.

42 ENGINEERING↗
DOE OSTI2023

ESnet/JLab FPGA Accelerated Transport

To increase the science rate for high data rates/volumes, Thomas Jefferson National Accelerator Facility (JLab) has partnered with Energy Sciences Network (ESnet) to define an edge to data center traffic shaping / steering transport capability featuring data event aware network shaping and forwarding. The keystone of this ESnet+JLab FPGA Accelerated Transport (EJFAT) is the joint development of an AI/ML directed dynamic compute work Load Balancer (LB) of UDP streamed data. The LB is a suite consisting of a Field Programmable Gate Array (FPGA) executing the dynamically configurable, low fixed latency LB data plane featuring real-time packet redirection and high throughput, and a control plane running on the FPGA host computer that monitors network and compute farm telemetry in order to make dynamic AI/ML guided decisions for destination compute host redirection/load balancing and destination resource provisioning. The LB provides for three-tier horizontal scaling across LB suites, core compute hosts, and CPUs within a host. The LB effectively provides seamless integration of edge/core computing to support direct experimental data processing for immediate use by JLab science programs and others such as the EIC as well as data centers of the future requiring high throughput and low latency for both hot and cooled data for both running experiment data acquisition systems and data center use cases.

97 MATHEMATICS AND COMPUTING↗