Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “energy distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

The relation between optical and γ-ray emission in BL Lac sources

ABSTRACT The relativistic jets produced by some Active Galactic Nuclei (AGNs) are among the most efficient persistent sources of non-thermal radiation and represent an ideal laboratory for studying high-energy interactions. In particular, when the relativistic jet propagates along the observer’s line of sight, the beaming effect produces dominant signatures in the observed spectral energy distribution (SED), from the radio domain up to the highest energies, with the further possibility of resulting in radiation-particle multimessenger associations. In this work, we investigate the relationships between the emission of γ rays and the optical spectra of a sample of AGN, selected from BL Lac sources detected by the Fermi Large Area Telescope (Fermi-LAT). We find that there is a close relationship between the optical and γ-ray spectral indices. Despite all the limitations due to the non-simultaneity of the data, this observation strongly supports a substantial role of Synchrotron-Self Compton (SSC) radiation in a single zone leptonic scenario for most sources. This result simplifies the application of theoretical models to explore the physical parameters of the jets in this type of sources.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Solid State Power Substation DC Node Optimization and Controller Hardware-In-The-Loop Demonstration

A solid state power substation (SSPS) node is a microgrid that integrates distributed energy resources and loads and injects/absorbs power to/from the SSPS distribution network. It is an essential building block of a futuristic distribution grid network. This paper presents the development and demonstration of optimization use cases of a SSPS DC node. By adopting multi-layer hierarchical control architecture and developing automatic device identification and dynamic optimization formulation algorithms, the SSPS DC node can perform plug-and-play resource integration and seamless transition of the optimized node operation under on and off grid condition without sophisticated algorithms, control mode changes, and user interactions. Four optimization use cases including economic dispatches with price signal changes, a sudden PV power drop, and a single directional meter and its associated costs with sending power back to the grid, and resiliency under a grid inverter trip condition were demonstrated through the real-time controller hardware-in-the-loop simulation.

Kim, Namwon↗
DOE OSTI2021

Hardware-in-the-Loop Testbed for Cyber-Physical Security of Photovoltaic Farms

In the last decades, modem grids with distributed energy resources, such as photovoltaic (PV) farms, are increasingly vulnerable to cyber-attacks that seriously affect the stability and performance of the power system. While cyber-physical security of smart grids is extensively studied, most of the existing work focuses on the grid level and neglects the modeling and features of device-level power electronics converters (PECs). Furthermore, establishing a high-fidelity simulation testbed that can simulate harmonic frequencies of the PV farm is in urgent need. In this paper, a high-fidelity and real-time hardware-in- the-loop testbed is built to simulate the harmonics of power electronics converters for cyber-physical security of PEC-enabled PV farms. Based on this testbed, the impact of typical cyber-attacks and physical faults on the PV converter can be analyzed, thus providing a foundation for cyber-attack detection, root cause diagnosis, and resilient control to mitigate the adverse effects of cyber-attacks.

14 SOLAR ENERGY↗
DOE OSTI2023

Privacy-Preserving Robust Consensus for Distributed Microgrid Control Applications

Consensus-based distributed control has been proposed for coordinating distributed energy resources (DERs) in microgrids (MGs). As one key component, distributed average observers are used to estimate the average of a group of reference signals (e.g., voltage, current, or power). State-of-the-art distributed average observers could lead to loss of privacy due to information exchange on the communication channels. The DERs' reference signals, which contain private information, could be inferred by an eavesdropper. In this article, a privacy-preserving distributed average observer is proposed that is based on robust consensus and uses the state decomposition method to preserve privacy. Compared to the existing methods, the proposed observer does not require the knowledge of the reference signal's derivative and gives accurate and smooth estimation, and is thus applicable for MG distributed control applications. A detailed analysis regarding the convergence and privacy properties of the proposed observer is presented. Here, the proposed observer is implemented on hardware controllers and validated in the context of distributed MG control applications through hardware-in-the-loop (HIL) tests.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Editorial for Special Issue: Grid-Interactive Efficient Buildings - Part 1

We are pleased to present starting with this volume of ASME Journal of Engineering for Sustainable Buildings and Cities (JESBC), a series of peer-reviewed papers related to some of ongoing research projects and applications of Grid-interactive Efficient Buildings (GEBs). As part of a new program initiated by the Building Technology Office (BTO) with the US Department of Energy (DOE), GEBs are characterized as highly energy-efficient buildings that are equipped with smart technologies and distributed energy resources that can be dynamically controlled to meet grid needs and minimize electricity system costs, while meeting occupants’ comfort and productivity requirements. In simple terms,DOE defines GEBs as efficient, connected, smart, and flexible buildings. The GEB technologies touch on the main topical areas of JESBC aimed at fostering sustainable buildings and cities by providing results of evaluation studies and demonstration projects. Indeed, one of the main goals for JESBC is to disseminate solutions to enhance the built environment energy efficiencies, low carbon services, inter-connectivity services, resilient multi-services, and healthy and comfortable living spaces.

buildings↗
DOE OSTI2020

Detecting the undetected: Dealing with non-routine events using advanced M&V meter-based savings approaches

In a rapidly evolving energy industry, utilities are dealing with new challenges like integrating distributed energy resources and market saturation for advanced lighting retrofits. Demand-side management programs require new approaches to meet aggressive carbon reduction goals. Advanced measurement & verification (M&V) is an energy data analysis method using smart meter data in combination with analytics to quantify energy efficiency project savings. Advanced M&V shows great promise for supporting next generation commercial programs including retro commissioning, multi-measure retrofits, and behavior change programs. Advanced M&V captures real project impacts at the meter, but sometimes non-project events can also impact consumption (so-called “non-routine events” [NREs]). Accurately detecting and accounting for NREs is important for reducing uncertainty of savings estimates and helps manage investment risk for different stakeholders (e.g., utilities, building owners, ESCOs). Recent research has shown promise in establishing data-driven techniques to identify and adjust for NREs, but fundamental questions still remain, such as: how can you distinguish NREs from acceptable noise in energy consumption profiles? What is the frequency and magnitude of NREs? Can their detection and adjustment be automated and streamlined? This paper documents the state of the art in NRE quantification and analysis. The results of research to quantify the frequency, nature and direction of NREs, and methods and metrics for determining a trigger threshold for taking action on NREs are presented. The paper also documents the latest technical guidance on application of NRE detection and adjustment methods.

Fernandes, Samuel↗
DOE OSTI2020

AGGREGATE: dAta-driven modelinG preservinG contRollable dEr for outaGe mAnagemenT and rEsiliency (Report for Task 10: Controllability and Observability Analysis (Deliverable D7))

It is common to have less than full observability for distribution systems, as the number of available measurements are not sufficient. Considering increasing penetration of distributed energy resources (DERs), it is imperative to understand and control distribution systems better. Developed for the transmission system, the original numerical observability analysis methods were based on the canonical DC Power Flow (DC-PF) model. However, the DC-PF model is ill-suited for the distribution system in which line resistance to reactance (R/X) ratios can be near unity. In this report, we apply the non-iterative Observability Test (OT) and Observable Island Identification Procedure (OIIP) in to the gain matrix from the distribution system state estimator. Because sensors are few in distribution systems, pseudo-measurements based on historical load profiles and zero-injection virtual measurements are often employed to ensure observability. However, both the observability and the accuracy of the state estimates are uncertain when historical data is limited/unavailable.

42 ENGINEERING↗
DOE OSTI2023

Stakeholder Training for IEEE 1547-2018 (Abbreviated Final Technical Report)

This project identifies and makes publicly available educational materials to assist stakeholders in adopting the revised IEEE Std 1547-2018, Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces. The new standard is significantly different than the previous 2003 version, contains new concepts and new technical requirements, and requires educational material on the application of these changes. NREL had a principal role in accelerating the revision process though its chairmanship of the IEEE Std 1547 working group to revise the standard and through technical support provided to the working group. Under this project, NREL and partners compiled and developed publicly available educational materials for IEEE Std 1547-2018, including webinars, white papers, and other resources on related topics.

14 SOLAR ENERGY↗
DOE OSTI2025

Integrated Multi-Fidelity Model and Co-Simulation Platform for Distribution System Transient and Dynamic Analysis—DistribuDyn

As inverter-based, distributed energy resources (DERs) and variable loads continue to proliferate across distribution systems, it is increasingly important to understand their impacts on system stability and reliability. However, most commercially available simulation tools for distribution planning primarily focus on steady-state and quasi-steady state analysis, offering limited capabilities to study transient and dynamic behaviors.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1972

Applications of the theory of optimal control of distributed-parameter systems to structural optimization

An extension of classical methods of optimal control theory for systems described by ordinary differential equations to distributed-parameter systems described by partial differential equations is presented. An application is given involving the minimum-mass design of a simply-supported shear plate with a fixed fundamental frequency of vibration. An optimal plate thickness distribution in analytical form is found. The case of a minimum-mass design of an elastic sandwich plate whose fundamental frequency of free vibration is fixed. Under the most general conditions, the optimization problem reduces to the solution of two simultaneous partial differential equations involving the optimal thickness distribution and the modal displacement. One equation is the uniform energy distribution expression which was found by Ashley and McIntosh for the optimal design of one-dimensional structures with frequency constraints, and by Prager and Taylor for various design criteria in one and two dimensions. The second equation requires dynamic equilibrium at the preassigned vibration frequency.

Armand, J. P.↗
NASA NTRS1974

An interpretation of the carbon-oxygen to iron ratio

Data from recent measurements on the composition of primary cosmic rays above 1 GeV/nucleon are critically reviewed for information pertaining to selection of suitable energy-dependent composition models. Areas where crucial experimental information may result in selection of a suitable model are pointed out. In particular, the study of the energy distribution of VVH nuclei, and the derivation of more accurate energy spectra of 10 less than or equal to Z less than or equal to 14, 15 less than or equal to Z less than or equal to 23 and Z greater than 24 would contribute to discriminate between models which rely on interstellar propagation and those that ascribe a different source mechanism for Fe group nuclei.

Balasubrahmanyan, V. K.↗
NASA NTRS1974

Photoelectron spectra of the decomposition of ethylene on /110/ tungsten

The experimental apparatus used in the investigation consisted of an ultrahigh-vacuum chamber, a triple-grid, a microwave-excited resonance lamp, and an electron energy analyzer. The chemical nature of the chemisorbed species was studied, taking into account the energy distribution of photoemitted electrons, work function determinations, and low-energy electron diffraction patterns.

Plummer, E. W.↗
NASA NTRS1976

A cosmic gamma-ray burst on 1975 May 14

A cosmic gamma-ray burst is described which was observed from a balloon with a double-scatter gamma-ray telescope. The observed burst had a rise time of about 0.15 sec, a duration of 0.11 sec, and variations on a time scale of 5 msec. The variations are shown to imply a maximum source dimension of 1500 km. The integral energy distribution of the burst is determined along with the total energy above 0.5 MeV. The direction of the source is found, with 90% confidence, to be limited to a circle with a radius of 25 deg centered at +39 deg galactic latitude and 40 deg galactic longitude. Two additional candidate bursts observed with the same telescope are briefly discussed.

Herzo, D.↗
NASA NTRS1983

Extragalactic 1 millimeter sources - Simultaneous observations at centimeter, millimeter, and visual wavelengths

Observations simultaneously made at visual (B, V, and R) wavelengths, at 1, 1.4, and 3.4 mm and at 1.3, 2, 6, and 20 cm of 9 QSOs and BL Lac objects are reported. The range of the millimeter-visual spectral index alpha sub mv was only 0.65-0.82, typical of optically thin synchrotron emission. This may indicate that the electrons radiating synchrotron emission in this portion of the spectrum are not subjected to large radiation losses, and therefore relativistic bulk motion with Doppler factors of about 10 are required. The visual spectral index is much more broadly distributed and typically larger than alpha sub mv. The spectral energy distributions have not changed much in the last two to five years except for 2251+15 and perhaps 0235+164. Only 1749+09 shows a sharp spectral break shortward of 1 mm. Sixteen other sources were observed at 1 mm, of which seven were detected.

Landau, R.↗
NASA NTRS1988

'Infrared cirrus' - New light on the interstellar medium

The observational data on 'infared cirrus', considered here to be emission from tenuous dust clouds scattered throughout the ISM, are reviewed. The morphology of individual clouds and of the global distribution of infared cirrus is addressed, as well as the energy distribution. Some of the implications of the results for the ISM are summarized, and prospects for future cirrus measurements are briefly addressed.

Hauser, Michael G.↗
NASA NTRS1992

Sputtering of ions from Cu and Al by low energy oxygen ion bombardment

The sputtering of Cu(+) and Al(+) ions from copper and aluminum while the target surface is bombarded with low energy oxygen ions (20 to 500 eV), is investigated. Both the ion yield, as a function of oxygen ion energy, and the kinetic energy distribution of the sputtered ions at a given oxygen ion energy are determined.

Eck, T. G.↗
NASA NTRS1992

A model of the galactic tidal interaction with the Oort comet cloud

A model of the in situ Oort cloud which is isotropic with a random distribution of perihelia directions and angular momenta is considered. The energy distribution adopted has a continuous range of values appropriate for long-period (greater than 200 yr) comets. The evolution of 1,000,000 comets are tracked as they are made observable by the galactic tidal torque. Detailed results are obtained for the predicted distribution of new comets. Predictions of observed distributions are presented and compared with the random in situ results as well as with the actual observed distributions of class I comets. The predictions are in reasonable agreement with actual observations and, in many cases, are significantly different from random when perihelia directions are separated into galactic northern and southern hemispheres.

Matese, John J.↗
NASA NTRS1993

Velocity space diffusion and nongyrotropy of pickup water group ions at comet Grigg-Skjellerup

The diffusion of water group cometary ions in velocity space at comet Grigg-Skjellerup was measured during the Giotto spacecraft encounter. The evolution of the collapsed pitch angle and energy distributions during the inbound and outbound passes shows that the timescale for energy diffusion may be similar to that for pitch angle diffusion. Fully isotropic pitch angle distributions were never seen. Also the bulk parameters of the three-dimensional distributions are examined. Transformation of these parameters into a field-aligned solar wind frame allows us to test the gyrotropy of the distributions. These observations imply that there were deviations from gyrotropy throughout the encounter becoming most important near to closest approach.

Coates, A. J.↗