Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic transformers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

A coupled effect of nuclear and electronic energy loss on ion irradiation damage in lithium niobate

Understanding irradiation effects induced by elastic energy loss to atomic nuclei and inelastic energy loss to electrons in a crystal, as well as the coupled effect between them, is a scientific challenge. Damage evolution in LiNbO 3 irradiated by 0.9 and 21 MeV Si ions at 300 K has been studied utilizing Rutherford backscattering spectrometry in channeling mode. During the low-energy ion irradiation process, damage accumulation produced due to elastic collisions is described utilizing a disorder accumulation model. Moreover, low electronic energy loss is shown to induce observable damage that increases with ion fluence. For the same electronic energy loss, the velocity of the incident ion could affect the energy and spatial distribution of excited electrons, and therefore effectively modify the diameter of the ion track. Furthermore, nonlinear additive phenomenon of irradiation damage induced by high electronic energy loss in pre-damaged LiNbO 3 has been observed. The result indicates that pre-existing damage induced from nuclear energy loss interacts synergistically with inelastic electronic energy loss to promote the formation of amorphous tracks and lead to rapid phase transformation, much more efficient than what is observed in pristine crystal solely induced by electronic energy loss. As a result, this synergistic effect is attributed to the fundamental mechanism that the defects produced by the elastic collisions result in a decrease in thermal conductivity, increase in the electron-phonon coupling, and further lead to higher intensity in thermal spike from intense electronic energy deposition along high-energy ion trajectory.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Incident flux angle induced crystal texture transformation in nanostructured molybdenum films

Molybdenum films were observed to undergo a dramatic change in crystal texture orientation when the incident flux angle was varied in an oblique angle sputter deposition on amorphous substrates. Reflection high-energy electron diffraction pole figure and scanning electron microscopy were used to analyze in detail the texture orientation of the films. The normal incident deposition resulted in a fiber texture film with the minimum energy (110) crystal plane parallel to the substrate surface. A (110)[110] biaxial texture was observed for the samples grown with low incident angles of less than 45 Degree-Sign , with respect to the surface normal. On the other hand, for an oblique angle deposition of larger than 60 Degree-Sign , a (111)[112] biaxial texture was observed and appeared to be consistent with a zone T structure where the geometrically fastest growth [001] direction of a crystal plays a dominant role in defining the texture. We argue that a structural transition had occurred when the incident flux was varied from near normal incidence to a large angle.

36 MATERIALS SCIENCE↗

Excited-State and Nonadiabatic Molecular Dynamics Methods with Broad Applicability

Electronically excited states play a pivotal role in the capture, transformation, storage, and emission of radiative energy. Despite much recent progress for small model systems, excited state properties and dynamics in many larger molecular devices and materials have remained elusive for experiment and theory. Nonadiabatic transitions between electronic states turn radiative energy into heat and are particularly difficult to control. This project aims to develop new electronic structure and nonadiabatic molecular dynamics (NAMD) methods to simulate, predict, and ultimately control the flow and transformation of excitation energy in a wide-range of light-driven molecular devices such as dyes, photocatalysts, and fluorescence emitters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon-assisted morphological manipulation of CdS nanostructures and their cathodoluminescence properties

CdS nanostructures with different morphologies and sizes were successfully fabricated through a facile and effective carbon-assisted thermal evaporation method. Through simply changing the positions of silicon substrates, the temperatures and the effects of carbon in different zones were modified, and thus the morphologies of CdS nanostructures were varied from multipods to nanobrushes to nanocups. These nanostructures were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectrometry (EDS), X-ray powder diffraction (XRD) and Raman spectroscopy. Cathodoluminescence (CL) measurement shows that the as-grown CdS nanostructures display different luminescent properties. CdS multipods and nanocups show mainly green emission centered at {approx}496 nm. However, nanobrushes exhibit predominant red emission band peaking at {approx}711 nm. These interesting results show that carbon not only affected the growth process but also influenced the properties of CdS nanostructures. - Graphical abstract: A facile and effective carbon-assisted thermal evaporation method is explored to synthesize CdS multipods, nanobrushes and nanocups. These CdS nanostructures display very different optical properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nitrogen-doped TiO{sub 2} nanotubes with enhanced photocatalytic activity synthesized by a facile wet chemistry method

Nitrogen-doped TiO{sub 2} nanotubes with enhanced photocatalytic activity were synthesized using titanate nanotubes as raw material by a facile wet chemistry method. The resulting nanotubes were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FT-IR) spectroscopy, and UV-vis absorption spectroscopy, etc. The photocatalytic activity of nitrogen-doped TiO{sub 2} nanotubes was evaluated by the decomposition of methylene blue under artificial solar light. And it was found that nitrogen-doped TiO{sub 2} nanotubes exhibited much higher photocatalytic activity than undoped titanate nanotubes.

36 MATERIALS SCIENCE↗

Sonochemical synthesis of manganese (II) hydroxide for supercapacitor applications

Graphical abstract: - Highlights: • Octahedral Mn(OH){sub 2} nanoparticles were prepared by sonochemical process. • TEM images indicates the formation of octahedral Mn(OH){sub 2} nanoparticles. • Octahedral Mn(OH){sub 2} nanoparticles are evaluated as a supercapacitor material. - Abstract: In this research, a rapid and controllable synthesis of octahedral Mn(OH){sub 2} nanoparticles with a size range from 140 to 200 nm has been done by a sonochemial irradiation method for the energy storage applications. Transmission electron microscopic images, energy disperse X-ray spectroscopy (EDX), X-ray photo electron spectroscopy (XPS), X-ray diffraction (XRD), and Fourier transform infrared (FTIR) analyses clearly indicate the formation of octahedral Mn(OH){sub 2} nanoparticles. Octahedral Mn(OH){sub 2} nanoparticles were evaluated as a supercapacitor material that exhibits specific capacitance 127 F g{sup −1} at a current density of 0.5 mA cm{sup −2} in the potential range from −0.1 to 0.8 V in 1 M Na{sub 2}SO{sub 4} solution.

36 MATERIALS SCIENCE↗

Preparation and supercapacitor application of the single crystal nickel hydroxide and oxide nanosheets

Graphical abstract: The nickel hydroxide and nickel oxide nanosheets prepared using CTAB at room temperature exhibit a high specific capacitance, prompt charge/discharge rate. - Highlights: • The nickel hydroxide nanosheets were prepared using CTAB at room temperature. • Ni(OH){sub 2} nanosheet can be successfully converted to NiO nanosheet via calcination. • The NiO nanosheet has a specific capacitance of 388 F g{sup −1} at 5 A g{sup −1} in KOH solution. • Anneal temperature impacts capacitive properties as electrode. - Abstract: The single crystalline Ni(OH){sub 2} nanosheets were synthesized by a simple chemical precipitation method using nickel chloride as precursors and ammonia as precipitating agent. The Ni(OH){sub 2} nanosheets were successfully converted to NiO nanosheets via calcination under appropriate conditions. Analytical methods such as X-ray diffraction (XRD) spectra, scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), and Fourier transformed infrared (FTIR) spectra were employed to characterize the morphology and microstructure of the final products. The experimental results revealed that Ni(OH){sub 2} nanosheets were shape-preserved transformed to NiO nanosheets at 250 °C for 24 h. Ni(OH){sub 2} and NiO nanosheets were directly functionalized as supercapacitor electrodes for potential energy storage applications, whose charge–discharge properties, electrochemical impedance spectra, cyclic voltammetry, and cycle performance were examined. The experimental results show that the single-crystalline NiO nanosheets are a promising candidate for the supercapacitor electrode. They exhibit a high specific capacitance, prompt charge/discharge rate.

36 MATERIALS SCIENCE↗

Pressure dependence of band-gap and phase transitions in bulk CuX (X = Cl, Br, I)

Usually a phase transition, in theoretical studies, is explored or verified by studying the total energy as a function of the volume considering various plausible phases. The intersection point, if any, of the free energy vs. volume curves for the different phases is then the indicator of the phase transition(s). The question is, can the theoretical study of a single phase alone indicate a phase transition? i.e. can we look beyond the phase under consideration through such a study? Using density-functional theory, we report a novel approach to suggest phase transition(s) through theoretical study of a single phase. Copper halides have been engaged for this study. These are direct band-gap semiconductors, with zinc blende structure at ambient conditions, and are reported to exhibit many phase transitions. We show that the study of volume dependence of energy band-gap in a single phase facilitates looking beyond the phase under consideration. This, when translated to pressures, reflects the phase transition pressures for CuX (X = Cl, Br, I) with an encouraging accuracy. This work thus offers a simple, yet reliable, approach based on electronic structure calculations to investigate new semiconducting materials for phase changes under pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic-Scale Structural Evolution and Stability of Supercooled Liquid of a Zr-Based Bulk Metallic Glass

In this Letter, direct experimental evidence is provided for understanding the thermal stability with respect to crystallization in the Zr{sub 41.2}Ti{sub 13.8}Cu{sub 12.5}Ni{sub 10}Be{sub 22.5} glass-forming liquid. Through high-resolution transmission electron microscopy, the atomic-structure evolution in the glass-forming liquid during the isothermal annealing process is clearly revealed. In contrast with the existing theoretical models, our results reveal that, prior to nanocrystallization, there exists a metastable state prone to forming icosahedralike atomic clusters, which impede the subsequent crystallization and hence stabilize the supercooled liquid. The outcome of the current research underpins the topological origin for the excellent thermal stability displayed by the Zr-based bulk metallic glass.

36 MATERIALS SCIENCE↗

Irradiation-induced β to α SiC transformation at low temperature

Here, we observed that β-SiC, neutron irradiated to 9 dpa (displacements per atom) at ≈1440 °C, began transforming to α-SiC, with radiation-induced Frank dislocation loops serving as the apparent nucleation sites. 1440 °C is a far lower temperature than usual β → α phase transformations in SiC. SiC is considered for applications in advanced nuclear systems, as well as for electronic or spintronic applications requiring ion irradiation processing. β-SiC, preferred for nuclear applications, is metastable and undergoes a phase transformation at high temperatures (typically 2000 °C and above). Nuclear reactor concepts are not expected to reach the very high temperatures for thermal transformation. However, our results indicate incipient β → α phase transformation, in the form of small (~5–10 nm) pockets of α-SiC forming in the β matrix. In service transformation could degrade structural stability and fuel integrity for SiC-based materials operated in this regime. However, engineering this transformation deliberately using ion irradiation could enable new electronic applications.

36 MATERIALS SCIENCE↗

Electrical and structural properties of ZnO synthesized via infiltration of lithographically defined polymer templates

We investigate the electrical and structural properties of infiltration-synthesized ZnO. In-plane ZnO nanowire arrays with prescribed positional registrations are generated by infiltrating diethlyzinc and water vapor into lithographically defined SU-8 polymer templates and removing organic matrix by oxygen plasma ashing. Transmission electron microscopy reveals that homogeneously amorphous as-infiltrated polymer templates transform into highly nanocrystalline ZnO upon removal of organic matrix. Field-effect transistor device measurements show that the synthesized ZnO after thermal annealing displays a typical n-type behavior, ~1019 cm -3 carrier density, and ~0.1 cm 2 V -1 s -1 electron mobility, reflecting highly nanocrystalline internal structure. The results demonstrate the potential application of infiltration synthesis in fabricating metal oxide electronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A facile synthesis of novel nanorod-assembling hollow nanowires of cadmium sulfide/DBTU nanocomposite

Novel nanorod-assembling hollow nanowires of cadmium sulfide/DBTU (N,N'-dibutylthiourea) nanocomposite were synthesized by reacting CdCl{sub 2} with in situ produced H{sub 2}S from reaction of butylamine and carbon disulfide at molar ratio 3:3 of CS{sub 2}:BuNH{sub 2} at 50 {sup o}C. This product was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SEAD), energy dispersive X-ray spectroscopy (EDAX), thermogravimetric (TG), Fourier transform infrared (FTIR) and UV-vis absorption spectra. A plausible mechanism that the extending DBTU molecules in solvent of CS{sub 2} induce the formation of CdS/DBTU nanorods by coordinating with the formed CdS particles, and construct these nanorods to hollow nanowires via molecular interactions is proposed and discussed on the basis of experimental results. Photoluminescence (PL) of CdS/DBTU nanocomposite exhibits increasing emission intensity largely.

36 MATERIALS SCIENCE↗

Facile fabrication of novel silver-polypyrrole-multiwall carbon nanotubes nanocomposite for replacement of platinum in dye-sensitized solar cell

This paper demonstrates the facile synthesis of high performance silver-polypyrrole-multiwall carbon nanotubes (Ag-PPy-FMWCNTS) nanocomposites via electrodeposition method on stainless steel substrate and its application as a low cost counter electrode (CE) for the precious platinum (Pt) free DSSC. The nanocomposites were characterized by variety of techniques such as Fourier transforms infrared (FTIR), X-ray diffraction, Scanning electron microscope (SEM), cyclic voltammetry (CV) and Four probe technique respectively. The cyclic voltammetry and Tafel polymerization measurements of Ag-PPy-FMWCNTS nanocomposites CE reveal the favorable electrocatalytic activity and low charge transfer resistance R{sub ct}(2.50 Ω cm{sup 2}) for I{sub 3}{sup −}/I{sup −} redox solution. The four probe studies showed the large electrical conductivity (226S cm{sup −1}) of Ag-PPy-FMWCNTS nanocomposite. The DSSC assembled with Ag-PPy-FMWCNTS nanocomposites CE display the considerable short circuit current density (13.95 mA cm{sup −2}) and acceptable solar to electrical conversion efficiency of 7.6%, which is higher to the efficiency of DSSC with thermally decomposed Pt reference electrode 7.1%. The excellent conversion efficiency, rapid charge transfer in combination with low cost and simple fabrication method of Ag-PPy-FMWCNTS nanocomposites can be exploited as an efficient and potential candidate to replace the Pt CE for large scale production of DSSC.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation of the photoactivity of pristine and mixed phase N-doped titania under visible and solar irradiation

Nitrogen doped titania nano-particles were synthesized by sol–gel method with an aim to investigate the impact of doping in titanium matrix and the titania phases on their photocatalytic activity under visible and solar irradiation. The structural, optical and chemical characterization of the prepared materials were done using X-ray diffraction analysis, scanning electron microscopy, UV–visible diffuse reflectance spectroscopy, photoluminescence spectroscopy, and Fourier transform infrared spectroscopy. The samples were calcined at different temperatures (200 °C–600 °C) to obtain different phases. All the samples showed red-shift in the visible region attributable to the doping of nitrogen in the titania matrix. The samples calcined at low temperatures showed high photocatalytic activity compared to the high temperature samples. The enhancement in the visible light activity may be attributed to the large amount of nitrogen present in the surface region of the catalyst and reduced carrier recombination. Among the high temperature samples the high activity may be due to the presence of mixed phase as well. - Highlights: • Pristine and mixed phases of N doped titania synthesized at different temperatures. • High visible light photoactivity exhibited by pristine rutile phase and mixed phase. • Role of surface N in rutile and matrix embedded N in other samples corroborated.

36 MATERIALS SCIENCE↗

Single source preparation of superparamagnetic Fe{sub 3}O{sub 4} nanoparticles by simple cyclic microwave approach

Graphical abstract: - Highlights: • Superparamagnetic Fe{sub 3}O{sub 4} nanoparticles were synthesized in high yield. • PEG-200 was applied as both solvent and reductive agent. • Single source synthesis of Fe{sub 3}O{sub 4} was performed. • Nontoxic materials and surfactant were used in current investigation. • Reaction time and temperature significantly decreased in current experiment. - Abstract: Polyol mediated process was applied for the synthesis of Fe{sub 3}O{sub 4} nanoparticles under microwave irradiation. By combination of polyol medium and microwave irradiation different advantages including low reaction time, low consumption of energy, and simplicity were achieved. Different parameters affecting on products including microwave irradiation power, reaction time, reactants concentration, and solvent were changed to reach the optimum condition for synthesis of Fe{sub 3}O{sub 4} nanoparticles. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), Fourier transform infrared (FT-IR) spectra, and vibrating sample magnetometer (VSM). Facile preparation and separation are important features of this route. This work has provided a general, simple, and effective method to control the composition and morphology of Fe{sub 3}O{sub 4} nanoparticles in nonaqueous solution, which will be important for inorganic synthesis methodology.

36 MATERIALS SCIENCE↗

Hydrogen production via reforming of biogas over nanostructured Ni/Y catalyst: Effect of ultrasound irradiation and Ni-content on catalyst properties and performance

Highlights: • Synthesis of nanostructured Ni/Y catalyst by sonochemical and impregnation methods. • Enhancement of size distribution and active phase dispersion by employing sonochemical method. • Evaluation of biogas reforming over Ni/Y catalyst with different Ni-loadings. • Preparation of highly active and stable catalyst with low Ni content for biogas reforming. • Getting H{sub 2}/CO very close to equilibrium ratio by employing sonochemical method. - Abstract: The effect of ultrasound irradiation and various Ni-loadings on dispersion of active phase over zeolite Y were evaluated in biogas reforming for hydrogen production. X-ray diffraction, field emission scanning electron microscopy, energy dispersive X-ray, Brunauer–Emmett–Teller, Fourier transform infrared analysis and TEM analysis were employed to observe the characteristics of nanostructured catalysts. The characterizations implied that utilization of ultrasound irradiation enhanced catalyst physicochemical properties including high dispersion of Ni on support, smallest particles size and high catalyst surface area. The reforming reactions were carried out at GHSV = 24 l/g.h, P = 1 atm, CH{sub 4}/CO{sub 2} = 1 and temperature range of 550–850 °C. Activity test displayed that ultrasound irradiated Ni(5 wt.%)/Y had the best performance and the activity remained stable during 600 min. Furthermore, the proposed reaction mechanism showed that there are three major reaction channels in biogas reforming.

36 MATERIALS SCIENCE↗

Mending cracks atom-by-atom in rutile TiO2 with electron beam radiolysis

Abstract Rich electron-matter interactions fundamentally enable electron probe studies of materials such as scanning transmission electron microscopy (STEM). Inelastic interactions often result in structural modifications of the material, ultimately limiting the quality of electron probe measurements. However, atomistic mechanisms of inelastic-scattering-driven transformations are difficult to characterize. Here, we report direct visualization of radiolysis-driven restructuring of rutile TiO 2 under electron beam irradiation. Using annular dark field imaging and electron energy-loss spectroscopy signals, STEM probes revealed the progressive filling of atomically sharp nanometer-wide cracks with striking atomic resolution detail. STEM probes of varying beam energy and precisely controlled electron dose were found to constructively restructure rutile TiO 2 according to a quantified radiolytic mechanism. Based on direct experimental observation, a “two-step rolling” model of mobile octahedral building blocks enabling radiolysis-driven atomic migration is introduced. Such controlled electron beam-induced radiolytic restructuring can be used to engineer novel nanostructures atom-by-atom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗