SEARCH · Engineering Papers

Results for “directivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

All sources NASA NTRS DOE OSTI

NASA NTRS1977

Directionally solidified ceramic eutectics

The aligned structures which result from the directional solidification (DS) of ceramic eutectics are of interest because of their potential for use in electronic devices and as structural materials. Techniques for growing DS ceramic eutectics are briefly discussed. The principles and controlling parameters of DS eutectic growth are described. The criteria for plane-front growth and the effect of growth rate on interlamellar or interfiber spacing are discussed. Examples of the effect of growth parameters on the alignment of the microstructure are given. Examples of the mechanical properties of directionally solidified oxide-oxide ceramics are also cited.

Ashbrook, R. L.↗

NASA NTRS1977

The interstellar medium in the direction of the Crab Nebula - Reconciling soft X-ray and radio observations

The total soft X-ray photoabsorption cross section of the interstellar medium (ISM) in the direction of the Crab Nebula is computed on the basis of a two-phase model of the ISM. This cross section is used to reanalyze Copernicus data on the X-ray spectrum of the Crab between 0.7 and 1.5 keV. The total hydrogen column density along the line of sight to that nebula is found to be approximately 2.6 by 10 to the 21st power H atoms/sq cm. This result is evaluated in light of the two-phase model of the ISM, and the predictions based on the X-ray data are compared with results of radio and UV observations. A discrepancy between the radio and X-ray measurements of the hydrogen column density is resolved by noting that 21-cm absorption measurements sample only the neutral hydrogen in clouds while X-ray measurements are sensitive to all forms of hydrogen in both cloud and intercloud regions. It is suggested that roughly 50% of the hydrogen in the direction of the Crab Nebula is in clouds and that 85% of this hydrogen is neutral and atomic.

Ride, S. K.↗

NASA NTRS1978

Direct nuclear-pumped lasers using the He-3/n,p/H-3 reaction

A description is presented of experimental results concerning a specific class of direct nuclear-pumped lasers classified as 'volumetric nuclear lasers'. In the considered laser system a fissioning gas, He-3, is mixed with the lasing gas to form a homogeneous mixture, resulting in uniform volume excitation. In typical volumetric nuclear lasers a fast-burst reactor is used as a source of neutrons which penetrate a polyethylene moderator. Here the fast neutrons are thermalized. After thermalization, neutrons scatter into the laser cell. Nuclear reactions produce a proton of 0.56 MeV and a tritium ion of 0.19. These ions produce secondary electrons which pump the laser medium creating a population inversion. The results reported demonstrate direct nuclear pumping of He-3-Ar, Xe, Kr, and Cl with the considered system.

Deyoung, R. J.↗

NASA NTRS1978

Direct analytical solutions to non-uniform beam problems

The direct analytical solution to the vibration of non-uniform beams with and without discontinuities and with various boundary conditions is presented. Results are compared to results from the exact solution for certain cases where the exact solution has been obtained. It is shown that the direct solution converges to the exact solution, in fact, with 'indefinite accuracy' just as Hamilton stated that it would.

Bailey, C. D.↗

NASA NTRS1977

Engineering of beam direct conversion for a 120-kV, 1-MW ion beam

Practical systems for beam direct conversion are required to recover the energy from ion beams at high efficiency and at very high beam power densities in the environment of a high-power neutral-injection system. Such an experiment is now in progress using a 120-kV beam with a maximum total current of 20 A. After neutralization, the H(+) component to be recovered will have a power of approximately 1 MW. A system testing these concepts has been designed and tested at 15 kV, 2 kW in preparation for the full-power tests. The engineering problems involved in the full-power tests affect electron suppression, gas pumping, voltage holding, diagnostics, and measurement conditions. Planning for future experiments at higher power includes the use of cryopumping and electron suppression by a magnetic field rather than by an electrostatic field. Beam direct conversion for large fusion experiments and reactors will save millions of dollars in the cost of power supplies and electricity and will dispose of the charged beam under conditions that may not be possible by other techniques.

Barr, W. L.↗

NASA NTRS1978

A direct element resequencing procedure

Element by element frontal solution algorithms are utilized in many of the existing finite element codes. The overall computational efficiency of this type of procedure is directly related to the element data input sequence. Thus, it is important to have a pre-processor which will resequence these data so as to reduce the element wavefronts to be encountered in the solution algorithm. A direct element resequencing algorithm is detailed for reducing element wavefronts. It also generates computational by products that can be utilized in pre-front calculations and in various post-processors. Sample problems are presented and compared with other algorithms.

Akin, J. E.↗

NASA NTRS1978

Shear rupture of a directionally solidified eutectic gamma/gamma prime - alpha (Mo) alloy

Directionally solidified Mo alloys are evaluated to determine the shear rupture strength and to possibly improve it by microstructural and heat treatment variations. Bars of the alloy containing nominally 5.7% Al and 33.5% Mo by weight with balance Ni were directionally solidified at rates between 10 and 100 mm per hour in furnaces with thermal gradients at the liquid-solid interface of 250 or 100 C per cm. A limited number of longitudinal shear rupture tests were conducted at 760 C and 207 MPa in the as - solidified and in several heat treated conditions. It is shown that shear rupture failures are partly transgranular and that resistance to failure is prompted by good fiber alignment and a matrix structure consisting mainly of gamma prime. Well aligned as - solidified specimens sustained the shear stress for an average of 81 hours. A simulated coating heat treatment appeared to increase the transformation of gamma to gamma prime and raised the average shear life of aligned specimens to 111 hours. However, heat treatments at 1245 C and especially at 1190 C appeared to be detrimental by causing partial solutioning of the gamma prime, and reducing lives to 47 and 10 hours, respectively.

Harf, F. H.↗

NASA NTRS1978

Bi-directional, buried-wire skin-friction gage

A compact, nonobtrusive, bi-directional, skin-friction gage was developed to measure the mean shear stress beneath a three-dimensional boundary layer. The gage works by measuring the heat flux from two orthogonal wires embedded in the surface. Such a gage was constructed and its characteristics were determined for different angles of yaw in a calibration experiment in subsonic flow with a Preston tube used as a standard. Sample gages were then used in a fully three-dimensional turbulent boundary layer on a circular cone at high relative incidence, where there were regimes of favorable and adverse pressure gradients and three-dimensional separation. Both the direction and magnitude of skin friction were then obtained on the cone surface.

Higuchi, H.↗

NASA NTRS1979

Direct current transformer

A direct current transformer in which the primary consists of an elongated strip of superconductive material, across the ends of which is direct current potential is described. Parallel and closely spaced to the primary is positioned a transformer secondary consisting of a thin strip of magnetoresistive material.

Khanna, S. M.↗

NASA NTRS1979

A tethering system for direct measurement of cardiovascular function in the caged baboon

A device suitable for the continuous measurement of physiological activity in large, conscious monkeys has permitted the direct recording of systemic arterial blood pressure and heart rate in caged baboons. The device comprises a lightweight fiberglass backpack, retained in place on the baboon by a thoracic elastic band and shoulder straps, and a flexible stainless steel tether connecting the pack to an electrocannular slip-ring in the top center of the baboon's cage. A chronically indwelling arterial catheter inserted retrograde into the abdominal aorta via the internal iliac artery and connected to a small pressure transducer on the pack provides direct measurement of blood pressure and heart rate. Body fluids can be sampled or drugs administered via an indwelling catheter in the inferior vena cava. Electrical and fluid connections between the fiberglass pack and recording and infusion equipment located outside the cage pass through the flexible tether and remain protected from the subject. The reliability of the tethering system has been demonstrated in physiological, pharmacological, and behavioral experiments with baboons.

Byrd, L. D.↗

NASA NTRS1979

Bi-directional four quadrant (BDQ4) power converter development

The feasibility for implementation of a concept for direct ac/dc multikilowatt power conversion with bidirectional transfer of energy was investigated. A 10 kHz current carrier was derived directly from a common 60 Hz three phase power system. This carrier was modulated to remove the 360 Hz ripple, inherent in the three phase power supply and then demodulated and processed by a high frequency filter. The resulting dc power was then supplied to a load. The process was implemented without the use of low frequency transformers and filters. This power conversion processes was reversible and can operate in the four quadrants as viewed from any of the two of the converter's ports. Areas of application include: power systems on air and spacecraft; terrestrial traction; integration of solar and wind powered systems with utility networks; HVDC; asynchronous coupling of polyphase networks; heat treatment; industrial machine drives; and power supplies for any use including instrumentation.

Schwarz, F. C.↗

NASA NTRS1980

The relationship of storm severity to directionally resolved radio emissions

Directionally resolved atmospheric radio frequency emission data were acquired from thunderstorms occurring in the central and southwestern United States. In addition, RF sferic tracking data were obtained from hurricanes and tropical depressions occurring in the Gulf of Mexico. The data were acquired using a crossed baseline phase interferometer operating at a frequency of 2.001 MHz. The received atmospherics were tested for phase linearity across the array, and azimuth/elevation angles of arrival were computed in real time. A histogram analysis of sferic burst count versus azimuth provided lines of bearing to centers of intense electrical activity. Analysis indicates a consistent capability of the phase linear direction finder to detect severe meteorological activity to distances of 2000 km from the receiving site. The technique evidences the ability to discriminate severe storms from nonsevere storms coexistent in large regional scale thunderstorm activity.

Johnson, R. O.↗

NASA NTRS1980

Geothermal direct heat use: Market potential/penetration analysis for Federal Region 9

A preliminary study was made of the potential for geothermal direct heat use in Arizona, California, Hawaii, and Nevada (Federal Region 9). An analysis was made of each state to: (1) define the resource, based on the latest available data; (2) assess the potential market growth for geothermal energy; and (3) estimate the market penetration, projected to 2020. Findings of the study include the following: (1) Potentially economical hydrothermal resources exist in all four states of the Region: however, the resource data base is largely incomplete, particularly for low to moderate temperature resources. (2) In terms of beneficial heat, the total hydrothermal resource identified so far for the four states is on the order of 43 Quads, including an estimated 34 Quads of high temperature resources which are suitable for direct as well as electrical applications. (3) In California, Hawaii, and Nevada, the industrial market sector has somewhat greater potential for penetration than the residential/commercial sector. In Arizona, however, the situation is reversed, due to the collocation of two major metropolitan areas (Phoenix and Tucson) with potential geothermal resources.

Powell, W.↗

NASA NTRS1980

Errors in magnetic direction finding due to nonvertical lightning channels

A theory showing that errors in lightning magnetic direction finding due to nonvertical source orientations are minimized by detecting the field from the lowest possible channel section is presented. For 99 cloud-to-ground lightning channels photographed in Arizona, 45 exhibited a bottom few hundred meters within about 8 deg of the vertical, the standard deviation of the distribution of lower-channel tilt angles being about 18 deg. These experimental results, coupled with theory, suggest that if a wideband gated direction finder is used, polarization errors due to nonvertical sources can be kept less than 1 deg for lightning beyond 10 km.

Uman, M. A.↗

NASA NTRS1980

Direct imaging of planetary systems around nearby stars

It is shown that by utilizing a space-borne telescope it may be possible to directly image planetary systems around the nearest stars. Direct imaging, while limited to the nearest stars, would provide a great deal of information on the planet, over and above the planet's orbital elements - estimates of the planet's size and rotation rate, and the presence or absence of an atmosphere are all possible if light from the planet can be separated from light from the star. It is shown that a Jupiter-like planet would be detectable around several of the nearest stars.

Davies, D. W.↗

NASA NTRS1980

Propagation directions of hydromagnetic waves in interplanetary space - Pioneer 10 and 11

The real and imaginary parts of spectral matrices of magnetic field fluctuations near 4 and 5 AU are used separately to generate estimates of hydromagnetic wave normal directions over the frequency range 0.00001 to 0.01 Hz in the spacecraft frame. Both procedures suggest the predominance of the Alfven mode over the fast and slow MHD modes among transverse magnetic field perturbations. Both procedures also show that the Alfven mode is more common among transverse perturbations at 4 AU than at 5 AU. Statistical techniques are for estimating uncertainties in computed wave normal directions and it is concluded that the real parts of the spectral matrices are more useful than the imaginary parts in specifying wave normals at times of magnetic quiet in the solar wind near 4 and 5 AU.

Parker, G. D.↗

NASA NTRS1980

Magnetic field directional discontinuities. I - Minimum variance errors

The paper deals with a statistical analysis of the errors associated with a minimum variance analysis of directional discontinuities by use of an idealized model of these discontinuities and various simulations, and also by an examination of actual Mariner 10 interplanetary magnetic field data. An empirical expression is derived for the magnitude of the error in an estimated discontinuity normal component, relative to the total field across the directional discontinuity. The analysis was performed primarily to aid in differentiating between interplanetary tangential and rotational discontinuities observed by Mariner 10.

Lepping, R. P.↗

NASA NTRS1980

Direct thermal water splitting by concentrated solar radiation for hydrogen production. Phase O: Proof of concept experiment

The direct production of hydrogen from water and solar energy concentrated into a high temperature aperture is described. A solar powered reactor able to dissociate water vapor and to separate the reaction product at high temperature was developed, and direct water splitting has been achieved in a laboratory reactor. Water vapor and radiative heating from a carbon dioxide laser are fed into the reactor, and water vapor enriched in hydrogen and water vapor enriched in oxygen are produced. The enriched water vapors are separated through a separation membrane, a small disc of zirconium dioxide heated to a range of 1800 k to 2800 k. To avoid water vapor condensation within the reactor, the total pressure within the reactor was limited to 0.15 torr. A few modifications would enable the reactor to be operated at an increased pressure of a few torrs. More substantial modifications would allow for a reaction pressure of 0.1 atmosphere.

Genequand, P.↗