Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “desorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

First-principles Analysis of NOx Adsorption on Anhydrous γ-Al2O3 Surfaces

The interaction of nitrogen oxides NOx (x=1-3) with gamma Al2O3 has been investigated using first-principles density functional theory calculations. NO and NO2 weakly physisorb on the clean, dehydrated (100) and (110) surfaces of gamma Al2O3, whereas the adsorption of the NO3 radical is rather strong. Only the basic-like O-down adsorption configurations were found to be stable. The interaction between NOx and gamma Al2O3 can be described as a surface mediated electron transfer process. For single NOx adsorption, greater electron transfer from the surface to the adsorbate (negatively charged) yields stronger interactions between NOx and the surface. The adsorption of four combinations of NOx+NOy (x=1-3, y=2, 3) pairs on the (100) and the (110) facets of gamma Al2O3 were investigated. Except for the NO2+NO2 pair, a strong cooperative effect that substantially enhances the stability of NOx on both gamma Al2O3 surfaces was found. This cooperative effect consists of surface-mediated electron transfer processes resulting in a favorable electrostatic interaction between two adsorbed NOx species. The pair was found to be the thermodynamically most stable state among the co-adsorbed NOx+NOy pairs on both gamma Al2O3 surfaces. The results are used to analyze the experimentally observed NOx evolution during temperature programmed desorption from NO2-saturated gamma Al2O3 substrates. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorption and Reaction of Acetone over CeOx(111) Thin Films

This study reports the interaction of acetone (CH{sub 3}COCH{sub 3}), the simplest ketone, with well ordered CeO2(111) thin film surfaces. The fully oxidized CeO{sub 2}(111) surface shows a weak interaction with acetone with the sole desorption product (TPD) being acetone at 210 K. The chemisorbed molecule binds to the surface as the 1-acetone species rather than through a bridge-bonded dioxy-configuration. Exposure of a CeO{sub 2}(111) surface to acetone at 600K removes oxygen as CO and results in the conversion of Ce{sup 4+} to Ce{sup 3+}. Acetone chemisorbs strongly on reduced CeO{sub 2-x}(111) with molecular acetone desorbing near 500 K. Decomposition also occurs with H{sub 2} desorbing between 450 and 600 K and C reacting with O in the ceria to desorb above 650 K. A stable species exists from 200 to 500 K on the reduced surface that has three unique types of C. High resolution C 1s XPS spectra indicate these are Ce-CH{sub 2}, C-CH{sub 3} and C-O species. C k-edge NEXAFS indicates the presence of C{double_bond}C and C{double_bond}O bonds. It is postulated that the intermediate is a carbanion bonded through both O and C atoms to Ce cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Origin of Support Effects on the Reactivity of a Ceria Cluster

The interaction between an active oxide and an oxide support plays a critical role in controlling the reactivity of oxide-on-oxide catalysts. In the present study, the reactivity of a small ceria cluster (Ce 2 O 4 ) supported on the reducible monoclinic zirconia and the irreducible γ-alumina was investigated using first-principles density functional theory (DFT+U) method. Our results showed that the binding energies of the Ce 2 O 4 cluster on the supporting ZrO 2 (111) and γ-Al 2 O 3 (100) substrates are -5.32 and -4.06 eV, respectively, indicating a very strong interaction. Based on these oxide-on-oxide model catalysts, the effects of supports on the reactivity of Ce 2 O 4 cluster were probed by the adsorption of CO 2 and CO. The acidic CO 2 molecule chemisorbs at the O sites of the cluster, forming a carbonate-like (CO 3 2- ) species through an acid-base interaction. Neither ZrO 2 (111) nor γ-Al 2 O 3 (100) exhibits significant effect on CO 2 adsorption over the supported Ce 2 O 4 cluster. In contrast, the reactive adsorption of CO on the supported Ce 2 O 4 cluster shows a strong dependence on the supporting oxides: The reactive adsorption energy for CO on the γ-Al 2 O 3 (100) supported Ce 2 O 4 is -4.33 eV whereas that on the ZrO 2 (111) supported cluster is only -0.55 eV. This reactive adsorption was accompanied by the reduction of Ce 4+ to Ce 3+ in the Ce 2 O 4 clusters, leading to the formation of (Ce 2 O 2 ) 2+ CO 3 2- that can be considered as an intermediate for CO oxidation to CO 2 . The very different stability of the (Ce 2 O 2 ) 2+ CO 3 2- intermediate on the two oxide supports were analyzed in the context of CO oxidation catalyzed by ceria. The ZrO 2 (111) supported Ce 2 O 4 cluster is expected to be highly active for CO oxidation whereas the turnover from CO to CO 2 on the γ-Al 2 O 3 (100) supported and the unsupported Ce 2 O 4 clusters is hindered by the desorption of CO 2 from the (Ce 2 O 2 ) 2+ CO 3 2- intermediates. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Identification of the Active Species in Photochemical Hole Scavenging Reactions of Methanol on TiO2

Molecular and dissociative methanol adsorption species were prepared on rutile TiO2(110) surfaces to study photocatalytic oxidation of methanol in ultrahigh vacuum (UHV) using temperature-programmed desorption (TPD). Adsorbed methoxy groups (CH3O-) were found to be the photoactive form of adsorbed methanol converted to adsorbed formaldehyde and a surface OH group by hole-mediated C-H bond cleavage. These results suggest that adsorbed methoxy is the effective hole scavenger in photochemical reactions involving methanol.

10 SYNTHETIC FUELS↗

Industrial Ziegler-Type Hydrogenation Catalysts Made from Co(neodecanoate)2 or Ni(2-ethylhexanoate)2 and AlEt3: Evidence for Nanoclusters and Sub-Nanocluster or Larger Ziegler-Nanocluster Based Catalysis

Ziegler-type hydrogenation catalysts are important for industrial processes, namely, the large-scale selective hydrogenation of styrenic block copolymers. Ziegler-type hydrogenation catalysts are composed of a group 8-10 transition metal precatalyst plus an alkylaluminum cocatalyst (and they are not the same as Ziegler-Natta polymerization catalysts). However, for {approx}50 years two unsettled issues central to Ziegler-type hydrogenation catalysis are the nature of the metal species present after catalyst synthesis, and whether the species primarily responsible for catalytic hydrogenation activity are homogeneous (e.g., monometallic complexes) or heterogeneous (e.g., Ziegler nanoclusters defined as metal nanoclusters made from combination of Ziegler-type hydrogenation catalyst precursors). A critical review of the existing literature (Alley et al. J. Mol. Catal. A: Chem. 2010, 315, 1-27) and a recently published study using an Ir model system (Alley et al. Inorg. Chem. 2010, 49, 8131-8147) help to guide the present investigation of Ziegler-type hydrogenation catalysts made from the industrially favored precursors Co(neodecanoate){sub 2} or Ni(2-ethylhexanoate){sub 2}, plus AlEt{sub 3}. The approach and methods used herein parallel those used in the study of the Ir model system. Specifically, a combination of Z-contrast scanning transmission electron microscopy (STEM), matrix assisted laser desorption ionization mass spectrometry (MALDI MS), and X-ray absorption fine structure (XAFS) spectroscopy are used to characterize the transition metal species both before and after hydrogenation. Kinetic studies including Hg(0) poisoning experiments are utilized to test which species are the most active catalysts. The main findings are that, both before and after catalytic cyclohexene hydrogenation, the species present comprise a broad distribution of metal cluster sizes from subnanometer to nanometer scale particles, with estimated mean cluster diameters of about 1 nm for both Co and Ni. The XAFS results also imply that the catalyst solutions are a mixture of the metal clusters described above, plus unreduced metal ions. The kinetics-based Hg(0) poisoning evidence suggests that Co and Ni Ziegler nanoclusters (i.e., M{sub {ge}4}) are the most active Ziegler-type hydrogenation catalysts in these industrial systems. Overall, the novelty and primary conclusions of this study are as follows: (i) this study examines Co- and Ni-based catalysts made from the actual industrial precursor materials, catalysts that are notoriously problematic regarding their characterization; (ii) the Z-contrast STEM results reported herein represent, to our knowledge, the best microscopic analysis of the industrial Co and Ni Ziegler-type hydrogenation catalysts; (iii) this study is the first explicit application of an established method, using multiple analytical methods and kinetics-based studies, for distinguishing homogeneous from heterogeneous catalysis in these Ziegler-type systems; and (iv) this study parallels the successful study of an Ir model Ziegler catalyst system, thereby benefiting from a comparison to those previously unavailable findings, although the greater M-M bond energy, and tendency to agglomerate, of Ir versus Ni or Co are important differences to be noted. Overall, the main result of this work is that it provides the leading hypothesis going forward to try to refute in future work, namely, that sub, M{sub {ge}4} to larger, M{sub n} Ziegler nanoclusters are the dominant, industrial, Co- and Ni- plus AlR{sub 3} catalysts in Ziegler-type hydrogenation systems.

36 MATERIALS SCIENCE↗

Model for Adsorption of Ligands to Colloidal Quantum Dots with Concentration-Dependent Surface Structure

A study of the adsorption equilibrium of solution-phase CdS quantum dots (QDs) and acid-derivatized viologen ligands (N-[1-heptyl],N'-[3-carboxypropyl]-4,4'-bipyridinium dihexafluorophosphate, V{sup 2+}) reveals that the structure of the surfaces of the QDs depends on their concentration. This adsorption equilibrium is monitored through quenching of the photoluminescence of the QDs by V{sup 2+} upon photoinduced electron transfer. When modeled with a simple Langmuir isotherm, the equilibrium constant for QD-V{sup 2+} adsorption, K{sub a}, increases from 6.7 x 10{sup 5} to 8.6 x 10{sup 6} M{sup -1} upon decreasing the absolute concentration of the QDs from 1.4 x 10{sup 6} to 5.1 x 10{sup 8} M. The apparent increase in K{sub a} upon dilution results from an increase in the mean number of available adsorption sites per QD from 1.1 (for [QD] = 1.4 x 10{sup 6} M) to 37 (for [QD] = 5.1 x 10{sup 8} M) through desorption of native ligands from the surfaces of the QDs and through disaggregation of soluble QD clusters. A new model based on the Langmuir isotherm that treats both the number of adsorbed ligands per QD and the number of available binding sites per QD as binomially distributed quantities is described. This model yields a concentration-independent value for K{sub a} of 8.7 x 10{sup 5} M{sup -1} for the QD-V{sup 2+} system and provides a convenient means for quantitative analysis of QD-ligand adsorption in the presence of competing surface processes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Formation of Nitrogen- and Sulfur-Containing Light-Absorbing Compounds Accelerated by Evaporation of Water from Secondary Organic Aerosols

Aqueous extracts of secondary organic aerosols (SOA) generated from the ozonolysis of dlimonene were subjected to dissolution, evaporation, and re-dissolution in the presence and absence of ammonium sulfate (AS). Evaporation with AS at pH 4-9 produced chromophores that were stable with respect to hydrolysis and had a distinctive absorption band at 500 nm. Evaporation accelerated the rate of chromophore formation by at least three orders of magnitude compared to the reaction in aqueous solution, which produced similar compounds. Absorption spectroscopy and high-resolution nanospray desorption electrospray ionization (nano-DESI) mass spectrometry experiments suggested that the molar fraction of the chromophores was small (< 2%), and that they contained nitrogen atoms. Although the colored products represented only a small fraction of SOA, their large extinction coefficients (>10{sup 5} L mol{sup -1} cm{sup -1} at 500 nm) increased the effective mass absorption coefficient of the residual organics in excess of 10{sup 3} cm{sup 2} g{sup -1} - a dramatic effect on the optical properties from minor constituents. Evaporation of SOA extracts in the absence of AS resulted in the production of colored compounds only when the SOA extract was acidified to pH {approx} 2 with sulfuric acid. These chromophores were produced by acid-catalyzed aldol condensation, followed by a conversion into organosulfates. The presence of organosulfates was confirmed by high resolution mass spectrometry experiments. Results of this study suggest that evaporation of cloud or fog droplets containing dissolved organics leads to significant modification of the molecular composition and serves as a potentially important source of light-absorbing compounds.

58 GEOSCIENCES↗

Multispecies diffusion models: A study of uranyl species diffusion

Rigorous numerical description of multi-species diffusion requires coupling of species, charge, and aqueous and surface complexation reactions that collectively affect diffusive fluxes. The applicability of a fully coupled diffusion model is, however, often constrained by the availability of species self-diffusion coefficients, as well as by computational complication for imposing charge conservation. In this study, several diffusion models with variable complexity in charge and species coupling were formulated and compared to describe reactive multi-species diffusion in groundwater. Diffusion of uranyl [U(VI)] species was used as an example in demonstrating the effectiveness of the models in describing multi-species diffusion. Numerical simulations found that a diffusion model with a single, common diffusion coefficient for all species was sufficient to describe multi-species U(VI) diffusion under steady-state condition of major chemical composition, but not under transient chemical conditions. Simulations revealed that a fully coupled diffusion model can be well approximated by a component-based diffusion model, which considers difference in diffusion coefficients between chemical components, but not between the species within each chemical component. This treatment significantly enhanced computational efficiency at the expense of minor charge conservation. The charge balance in the component-based diffusion model can be rigorously enforced, if necessary, by adding an artificial kinetic reaction term induced by the charge separation. The diffusion models were applied to describe U(VI) diffusive mass transfer in intragranular domains in two sediments collected from US Department of Energy's Hanford 300A where intragrain diffusion is a rate-limiting process controlling U(VI) adsorption and desorption. The grain-scale reactive diffusion model was able to describe U(VI) adsorption/desorption kinetics that has been described using a semi-empirical, multi-rate model. Compared with the multi-rate model, the diffusion models have the advantage to provide spatiotemporal speciation evolution within the diffusion domains.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Chemical Dynamics, Molecular Energetics, and Kinetics at the Synchrotron

Scientists at the Chemical Dynamics Beamline of the Advanced Light Source in Berkeley are continuously reinventing synchrotron investigations of physical chemistry and chemical physics with vacuum ultraviolet light. One of the unique aspects of a synchrotron for chemical physics research is the widely tunable vacuum ultraviolet light that permits threshold ionization of large molecules with minimal fragmentation. This provides novel opportunities to assess molecular energetics and reaction mechanisms, even beyond simple gas phase molecules. In this perspective, significant new directions utilizing the capabilities at the Chemical Dynamics Beamline are presented, along with an outlook for future synchrotron and free electron laser science in chemical dynamics. Among the established and emerging fields of investigations are cluster and biological molecule spectroscopy and structure, combustion flame chemistry mechanisms, radical kinetics and product isomer dynamics, aerosol heterogeneous chemistry, planetary and interstellar chemistry, and secondary neutral ion-beam desorption imaging of biological matter and materials chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reactions of NO2 with BaO/Pt(111) Model Catalysts: The Effects of BaO Film Thickness and NO2 Pressure on the Formation of Ba(NOx)2 Species

The adsorption and reaction of NO2 on BaO (<1, ~3, and >20 monolayer equivalent (MLE))/Pt(111) model systems were studied with temperature programmed desorption (TPD), X-ray photoelectron spectroscopy (XPS), and infrared reflection absorption spectroscopy (IRAS) under ultra-high vacuum (UHV) as well as elevated pressure conditions. NO2 reacts with sub-monolayer BaO (<1 MLE) to form nitrites only, whereas the reaction of NO2 with BaO (~3 MLE)/Pt(111) produces mainly nitrites and a small amount of nitrates under UHV conditions (PNO2 ~ 1.0 × 10-9 Torr) at 300 K. In contrast, a thick BaO(>20 MLE) layer on Pt(111) reacts with NO2 to form nitrite-nitrate ion pairs under the same conditions. At elevated NO2 pressures (≥ 1.0 × 10-5 Torr), however, BaO layers at all these three coverages convert to amorphous barium nitrates at 300 K. Upon annealing to 500 K, these amorphous barium nitrate layers transform into crystalline phases. The thermal decomposition of the thus-formed Ba(NOx)2 species is also influenced by the coverage of BaO on the Pt(111) substrate: at low BaO coverages, these species decompose at significantly lower temperatures in comparison with those formed on thick BaO films due to the presence of Ba(NOx)2/Pt interface where the decomposition can proceed at lower temperatures. However, the thermal decomposition of the thick Ba(NO3)2 films follows that of bulk nitrates. Results obtained from these BaO/Pt(111) model systems under UHV and elevated pressure conditions clearly demonstrate that both the BaO film thickness and the applied NO2 pressure are critical in the Ba(NOx)2 formation and subsequent thermal decomposition processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combatting Ionic Aggregation using Dielectric Forces Combining Modeling/Simulation and Experimental Results to Explain End-capping of Primary Amine Functionalized Polystyrene

Chain-end functionalization of living poly(styryl)lithium using 1-(3-bromopropyl)-2,2,5,5-tetramethyl-1-aza-2,5-disilacyclo-pentane (BTDP) to generate primary amine end-functionalized polystyrene was investigated using high vacuum anionic polymerization techniques. 13C NMR spectroscopy and Matrix Assisted Laser Desorption Ionization Time of Flight Mass Spectrometry (MALDI-TOF MS) were used to evaluate polymer end-groups and demonstrated that quantitative amine functionalized polymer was attained under appropriate reaction conditions. In general, the polymerization of styrene was conducted in benzene and the end-capping reaction was performed by adding tetrahydrofuran (THF) to the reaction prior to the addition of BTDP in THF at room temperature. Results indicated that approximately 20% THF by volume is required to obtain 100% end-capping free from side reactions. When too little or no THF was present, side reactions such as lithium halogen exchange followed by Wurtz coupling resulted in unfunctionalized head-to-head dimer as well as other byproducts. Modeling and simulation of the solvent effects using hybrid methods (the so-called QM/MM method) suggest that THF effectively dissociated the anionic chain-end aggregation, thereby resulting in the desired primary amine functionalized polymer. Molecular dynamics (MD) simulations were conducted to develop an understanding of the physics of counterions involved in the end-functionalization process.

36 MATERIALS SCIENCE↗

Temperature-dependent growth and transient state of hydrogen-induced nanocavities in silicon

Silicon samples H-implanted to a dose of 3x10{sup 16} cm{sup -2} were analyzed by positron annihilation and ion backscattering techniques to investigate the growth of H-induced nanocavities at different annealing temperatures (400-900 deg. C). Positron annihilation lifetime spectroscopy revealed a constant increase in the vacancy cluster size (i.e., nanocavity size) as the annealing temperature increased. On the other hand, Doppler broadening and ion channeling measurements suggested strong interaction between the implanted H and the defects depending on the annealing temperature. Furthermore, Au-gettering experiments revealed that transient gettering sites are formed at 600 deg. C between the H projected range and the surface. These results indicated that H desorption is one of the key factors in the optimization of the gettering process with H-induced nanocavities.

36 MATERIALS SCIENCE↗

In situ GaN decomposition analysis by quadrupole mass spectrometry and reflection high-energy electron diffraction

Thermal decomposition of wurtzite (0001)-oriented GaN was analyzed: in vacuum, under active N exposure, and during growth by rf plasma-assisted molecular beam epitaxy. The GaN decomposition rate was determined by measurements of the Ga desorption using in situ quadrupole mass spectrometry, which showed Arrhenius behavior with an apparent activation energy of 3.1 eV. Clear signatures of intensity oscillations during reflection high-energy electron diffraction measurements facilitated complementary evaluation of the decomposition rate and highlighted a layer-by-layer decomposition mode in vacuum. Exposure to active nitrogen, either under vacuum or during growth under N-rich growth conditions, strongly reduced the GaN losses due to GaN decomposition.

36 MATERIALS SCIENCE↗

Luminescence evolution of ZnO single crystal under low-energy electron beam irradiation

The effects of electron beam irradiation on the luminescence of ZnO single crystals were investigated by cathodoluminescence. We have found that the evolution of the intensity during the e-beam irradiation depends on the surface polarity. For O-face, the ultraviolet (UV) emission decreases exponentially and approaches an asymptotic value. For Zn-face, it first increases and then decreases. The decrease components are similar in both faces. If we halt the e-beam irradiation, the UV intensity recovers partially. These results suggest that the decrease in the UV evolution is related to metastable bulk defect reactions at the subsurface region while the increase is related to surface reaction such as electron-stimulated desorption.

36 MATERIALS SCIENCE↗

XPS and AFM Study of GaAs Surface Treatment

Obtaining smooth and atomically clean surfaces is an important step in the preparation of a surface for device manufacturing. In this work different processes are evaluated for cleaning a GaAs surface. A good surface cleaning treatment is that which provides a high level of uniformity and controllability of the surface. Different techniques are useful as cleaning treatments depending on the growth process to be used. The goal is to remove the oxygen and carbon contaminants and then form a thin oxide film to protect the surface, which is easy to remove later with thermal desorption mechanism like molecular beam epitaxy (MBE) with minimal impact to the surface. In this study, atomic force microscopy (AFM), x-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS) were used to characterize the structure of the surface, the composition, as well as detect oxygen and carbon contaminant on the GaAs surface. This study consists in two parts. The first part the surface was subjected to different chemical treatments. The chemical solutions were: (a)H{sub 2}SO{sub 4}:H{sub 2}O{sub 2}:H{sub 2}O(4:1:100), (b) HCl: H{sub 2}O(1:3), (c)NH{sub 4}OH 29%. The treatments (a) and (b) reduced the oxygen on the surface. Treatment (c) reduces carbon contamination. In the second part we made MOS devices on the surfaces treated. They were characterized by CV and IV electrical measurements. They show frequency dispersion.

36 MATERIALS SCIENCE↗

Anisotropic etching of amorphous perfluoropolymer films in oxygen-based inductively coupled plasmas

An amorphous perfluoropolymer, 'Cytop' (Asahi Glass Co., Ltd.), is a preferable material for the fabrication of micro total analysis system devices because of its superior optical transparency over a wide wavelength range and low refractive index of 1.34, which is almost the same as that of water, as well as excellent chemical stability. To establish the precise microfabrication technology for this unique resin, the dry etching of the amorphous perfluoropolymer in Ar/O{sub 2} low-pressure inductively coupled plasma has been studied. A relatively high etch rate of approximately 6.3 {mu}m/min at maximum and highly anisotropic etched features was attained. Plasma measurements by a single Langmuir probe technique and actinometry revealed that etching is dominated by ion-assisted surface desorption above a 10%O{sub 2} mixing ratio, whereas the supply of active oxygen species is the rate-limiting process below 10%. Moreover, angled x-ray photoelectron spectroscopy measurements of an etched trench pattern revealed that a high anisotropy is attributed to the formation of a carbon-rich sidewall protection layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of the measurement procedure on the field-effect dependent conductivity of ZnO nanorods

The electrical properties of field-effect transistors fabricated on the basis of single ZnO nanorods were analyzed under ambient conditions and in the chamber of a scanning electron microscope under high-vacuum conditions. Under ambient conditions, the threshold voltage and conductivity may depend strongly on the details of the measurement procedure as the chosen gate voltage range and gate voltage sweep direction. Electron irradiation in a scanning electron microscope under high-vacuum conditions at {approx}10{sup -5} mbar leads to desorption of oxygen and other electronegative molecules, which can increase the conductivity by more than two orders of magnitude.

36 MATERIALS SCIENCE↗