Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Fundamental and harmonic electron cyclotron maser emission

The plasma conditions and features of the energetic electron distribution in electron cyclotron maser emission for which growth in a particular mode is favored when the ratio of the plasma frequency omega(p) to the electron cyclotron frequency Omega(e) is greater than about 0.3 are determined. It is shown that growth at the fundamental is suppressed as omega(p)/Omega(e) increases and emission at harmonics of Omega(e) dominates. Growth at harmonics of Omega(e) is not restricted to the O and X modes, but can also occur for the Z mode. Whether or not growth in a particular mode dominates depends both on omega(p)/Omega(e) and on the form of the distribution. If the density of the energetic electrons is sufficiently large, the dispersion relations of the O and X modes are modified so that the group velocities of the growing O and X mode waves can be comparable to that of the growing Z mode waves.

Winglee, R. M.↗
NASA NTRS1986

Gravitational microlensing at large optical depth

A large number of numerical models of gravitational microlensing by stars in the lensing galaxy have been calculated, and properties of the models are described. The expected light intensity variations are more rapid when optical depth to microlensing is large, but the time scale is a few years in the best cases, and much longer in a typical case. However, microlensing introduces considerable scatter, up to two or three orders of magnitude, to the intensity of macroimages expected at any given time, and this may considerably complicate the analysis of the observed lenses. It is shown that macroimage is surrounded with a faint 'halo' made of a large number of microimages from individual stars with average surface brightness falling off as R to the -4th. It is also shown that a high surface mass density of continuously distributed matter may affect very strongly properties of microlensing, making possible very large declines in observed intensity, up to two or three orders of magnitude.

Paczynski, B.↗
NASA NTRS1987

Diffuse infrared emission of the galaxy: Large scale properties

A quantitative analysis of Infrared Astronomy Satellite (IRAS) data in the galactic plane shows that: about 66% of the power radiated in the 100 micron band comes from the diffuse medium, the other 33% coming from well identified luminous sources. The diffuse emission has almost constant colors throughout the Galaxy, similar to the local cirrus colors. The sources have a much lower 12 micron/25 micron and a much high 60 micron/100 micron emission ratio than the diffuse component, giving a very striking anticorrelation in the color-color diagrams. The separation between one narrow and a second broader component shows that the molecular component does not provide much more than one half of the diffuse emission in the molecular ring: this implies a 4 pi nuI(nu) emissivity at 100 microns for the atomic component of about 2.4 x 10 to the minus 30th watts per H atom, 10 times higher than the emissivity of the molecular component at the same galactocentric radius. The atomic component emissivity measures the interstellar radiation field density. The temperature distribution of the 2 components is discussed comparing IRAS data with measures of the 900 micron emission of the galactic plane, which appears to be dominated by cold dust in the narrow component.

Puget, J. L.↗
NASA NTRS1987

Application of digital holographic interferometry to pressure measurements of symmetric, supercritical and circulation-control airfoils in transonic flow fields

Six airfoil interferograms were evaluated using a semiautomatic image-processor system which digitizes, segments, and extracts the fringe coordinates along a polygonal line. The resulting fringe order function was converted into density and pressure distributions and a comparison was made with pressure transducer data at the same wind tunnel test conditions. Three airfoil shapes were used in the evaluation to test the capabilities of the image processor with a variety of flows. Symmetric, supercritical, and circulation-control airfoil interferograms provided fringe patterns with shocks, separated flows, and high-pressure regions for evaluation. Regions along the polygon line with very clear fringe patterns yielded results within 1% of transducer measurements, while poorer quality regions, particularly near the leading and trailing edges, yielded results that were not as good.

Torres, Francisco J.↗
NASA NTRS1987

The large-scale peculiar velocity field in flat models of the universe

The inflationary universe scenario predicts a flat universe and both adiabatic and isocurvature primordial density perturbations with the Zel'dovich spectrum. The two simplest realizations, models dominated by hot or cold dark matter, seem to be in conflict with observations. Flat models with two components of mass density, where one of the components of mass density is smoothly distributed, are examined, and the large-scale peculiar velocity field for these models is computed. For the smooth component the authors consider relativistic particles, a relic cosmological term, and light strings. At present the observational situation is unsettled, but, in principle, the large-scale peculiar velocity field is a very powerful discriminator between these different models.

Vittorio, Nicola↗
NASA NTRS1987

Navier-Stokes simulation of a hypersonic generic wing/fuselage

An unsteady thin-layer Navier-Stokes code is used to calculate a generic wing/fuselage configuration at a Mach number of 25 and freestream conditions corresponding to an altitude of 220,000 feet. Calculations were performed with the assumptions of a perfect gas and with chemical equilibrium, and the boundary layer was assumed to be turbulent and to have a surface temperature prescribed at 1255 K. Results for the two different gas assumptions were compared in terms of distributions of pressure, density, temperature, Mach number, ratio of specific heat, and heat transfer. Numerical problems arising in the calculations were identified.

Wai, John C.↗
NASA NTRS1987

Antiferromagnetism of La2CuO(4-y) studied by muon-spin rotation

Zero-field spin precession of positive muons has been observed in the antiferromagnetic state of La2CuO(4-y). Sharp onsets of the sublattice magnetization are found at temperatures close to those of the susceptibility maxima of different specimens. The long-lived precession signal indicates a microscopically homogeneous distribution of spin density at each Cu atom below the Neel temperature. A combination of the present results and neutron-scattering studies indicates the ordered moment per Cu atom to be significantly less than 1 mu(B).

Uemura, Y. J.↗
NASA NTRS1986

Application of digital holographic interferometry to pressure measurements of symmetric, supercritical, and circulation control airfoils in transonic flow fields

Six airfoil interferograms were evaluated using a semiautomatic image-processor system which digitizes, segments, and extracts the fringe coordinates along a polygonal line. The resulting fringe order function was converted into density and pressure distributions and a comparison was made with pressure transducer data at the same wind tunnel test conditions. Three airfoil shapes were used in the evaluation to test the capabilities of the image processor with a variety of flows. Symmetric, supercritical, and circulation-control airfoil interferograms provided fringe patterns with shocks, separated flows, and high-pressure regions for evaluation. Regions along the polygon line with very clear fringe patterns yielded results within 1 percent of transducer measurements, while poorer quality regions, particularly near the leading and trailing edges, yielded results that were not as good.

Torres, Francisco J.↗
NASA NTRS1987

MHD wave breaking in the outer plasmasphere

Empirical models of the average magnetospheric magnetic field, plasma density, and temperature distributions are used to construct a model of the distribution of MHD wave mode speeds within the magnetosphere. A persistent feature of the derived optical structure is a pronounced minimum of the wave speeds in the outer plasmasphere, i.e., a magnetospheric 'shoal'. This feature does not map along magnetic field lines, but is confined to the equatorial region, leading to a positive radial gradient of wave speeds near synchronous orbit. The breaking of earthward propagating disturbances in this region may play an essential role in the formation of the substorm injection boundary and in the creation of equatorially trapped warm ion distributions.

Moore, T. E.↗
NASA NTRS1989

Variable thermal properties and thermal relaxation time in hyperbolic heat conduction

Numerical solutions were obtained for a finite slab with an applied surface heat flux at one boundary using both the hyperbolic (MacCormack's method) and parabolic (Crank-Nicolson method) heat conduction equations. The effects on the temperature distributions of varying density, specific heat, and thermal relaxation time were calculated. Each of these properties had an effect on the thermal front velocity (in the hyperbolic solution) as well as the temperatures in the medium. In the hyperbolic solutions, as the density or specific heat decreased with temperature, both the temperatures within the medium and the thermal front velocity increased. The value taken for the thermal relaxation time was found to determine the 'hyperbolicity' of the heat conduction model. The use of a time dependent relaxation time allowed for solutions where the thermal energy propagated as a high temperature wave initially, but approached a diffusion process more rapidly than was possible with a constant large relaxation time.

Glass, David E.↗
NASA NTRS1989

An exact solution for a thick domain wall in general relativity

An exact solution of the Einstein equations for a static, planar domain wall with finite thickness is presented. At infinity, density and pressure vanish and the space-time tends to the Minkowski vacuum on one side of the wall and to the Taub vacuum on the other side. A surprising feature of this solution is that the density and pressure distribution are symmetric about the central plane of the wall whereas the space-time metric and therefore also the gravitational field experienced by a test particle is asymmetric.

Goetz, Guenter↗
NASA NTRS1989

Mars rover concept development

A structured study effort to develop an extensive, innovative set of mobility and navigation concepts for a planetary exploration vehicle along with the concomitant value system and evaluation tools is presented. A further objective is to submit these concepts to a rigorous, structured evaluation process to derive the most promising candidate systems. To support the evaluation process, a three-layer computer model of the Martian surface was developed, based on the 1/64 deg Digital Elevation Model (DEM) of Mars. Local surface roughness based on measured Martian slope distribution and power spectral density was superimposed on the DEM, and rocks based on Moore's distribution model were added. To assess performance, selected concepts were modeled using DADS, and simulations were run with the vehicle traversing the Martian surface model, including one-meter-high vertical steps and one-meter-wide crevasses. The design details of three promising candidate systems are presented, along with the discussion of their evolution with some recommendations.

Mctamaney, Louis S.↗
NASA NTRS1990

Equivalence of physically based statistical fracture theories for reliability analysis of ceramics in multiaxial loading

The present comparison of the Batdorf (1974) flaw density and orientation distribution approach with Evans' (1978) elemental strength approach, with a view to identities in fracture criteria and distribution functions, notes that despite their fundamental differences in multiaxial loading fracture probabilities, the two approaches yield identical predictions. Lamon's (1988) assertion to the contrary, in light of different theoretical predictions by the two methods for the case of alumina disks loaded in flexure, is demonstrated to be in error.

Chao, Luen-Yuan↗
NASA NTRS1991

Plasma contactor research, 1990

Emissive and Langmuir probes were used to measure plasma potential profiles, plasma densities, electron energy distributions, and plasma noise levels near a hollow cathode-based plasma contactor emitting electrons. The effects of electron emission current (100 to 1500 mA) and contactor flowrate (2 to 10 sccm (Xenon)) on these data are examined. Retarding potential analyzer (RPA) measurements showing that high energy ions generally stream from a contactor along with the electrons being emitted are also presented, and a mechanism by which this occurs is postulated. This mechanism, which involves a high rate of ionization induced between electrons and atoms flowing together from the hollow cathode orifice, results in a region of high positive space charge and high positive potential. Langmuir and RPA probe data suggests that both electrons and ions expand spherically from this potential hill region. In addition to experimental observations, a simple one-dimensional model which describes the electron emission process and predicts the phenomena just mentioned is presented and is shown to agree qualitatively with these observations. Experimental results of the first stage of bilateral cooperation with the Italian Institute of Interplanetary Space Physics (IFSI CNR) are presented. Sharp, well-defined double layers were observed downstream of a contactor collecting electrons from an ambient plasma created in the IFSI Facility. The voltage drop across these double layers was observed to increase with the current drawn from the ambient plasma. This observation, which was not as clear in previous IFSI tests conducted at higher neutral pressures, is in agreement with previous experimental observations made at both Colorado State University and NASA Lewis Research Center. Greater double layer voltage drops, multiple double layers, and higher noise levels in the region near the double layers were also observed when a magnetic field was imposed and oriented perpendicular to the line joining the contactor and simulator.

Williams, John D.↗
NASA NTRS1990

Theory of electromagnetic cyclotron wave growth in a time-varying magnetoplasma

The effect of a time-dependent perturbation in the magnetoplasma on the wave and particle populations is investigated using the Kennel-Petchek (1966) approach. Perturbations in the cold plasma density, energetic particle distribution, and resonance condition are calculated on the basis of the ideal MHD assumption given an arbitrary compressional magnetic field perturbation. An equation is derived describing the time-dependent growth rate for parallel propagating electromagnetic cyclotron waves in a time-varying magnetoplasma with perturbations superimposed on an equilibrium configuration.

Gail, William B.↗
NASA NTRS1989

Mechanical alloying, characterization and consolidation of Ti-Al-Ni alloys

Mechanical alloying is being investigated as a processing route for the production of aluminide intermetallics. This program involves powder production and characterization, consolidation and thermal treatments and determination of microstructure-property relationships. An attritor mill is being used to produce powder in lots up to 1000 grams and the processing parameters are being systematically varied to establish the optimum milling conditions. The mill is being instrumented to generate data related to the processing to provide a basis for theoretical modeling. Powder is being characterized using thermal analysis, optical and electron microscopy and X-ray diffraction. Particle size distributions and powder density are being determined. Consolidation of the powder is being approached in several different ways including, cold isostatic pressing, sintering, extrusion and hot pressing. The results of the program so far will be presented and future directions discussed.

Nash, P.↗
NASA NTRS1991

Model dependence of velocities derived from coronal resonance lines

Intensity measurements of coronal resonance lines can be used to determine the outflow velocities of the scattering particles, provided the distribution of the densities, temperatures and velocities along the line of sight is known. A parameter study is designed and carried out to investigate the effect of surrounding denser regions with different temperatures and velocities on the velocity deduced from intensity measurements of the H I Lyman-alpha line in low density coronal holes.

Esser, Ruth↗
NASA NTRS1991

Temporal study of wake formation behind a conducting body

The temporal evolution of the wake of a conducting body is studied experimentally in a pulsed plasma device. Three-dimensional measurements of the plasma potential, density, particle energy distribution, and ion currents are measured throughout the near- and mid-wake regions during the wake formation. It is found that the potential behind the conducting body is initially negative. This negative potential is caused by the higher mobility of the electrons, allowing them to flow into the ion free wake region. The negative potential in the wake region induces an electric field that pulls ions into the region behind the conducting body. However, the dominant factor in determining the length of the near wake is the thermal energy spread of the ions. At later times, as the sheath forms around the conducting body, ions are deflected by the potential gradient in the sheath region. This deflection, in addition to the thermal energy spread of the ions, determines the length of the near wake.

Meassick, S.↗