Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data product”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Assessment of SNPP VIIRS RSB detector-to-detector differences using deep convective clouds and deserts

An accurate on-orbit characterization of the Visible Infrared Imaging Radiometer Suite (VIIRS) onboard the Suomi National Polar-orbiting Partnership satellite is essential to satisfy the requirements from NOAA, NASA, and the general research community for high-quality operational and research products. NASA’s Land Science Investigator-led Processing System (LSIPS) sensor data records (SDRs) are utilized to assess the stability of the calibrated top of atmosphere reflectance over the deep convective clouds (DCCs) and over the Libya-4desert site. The results from DCCs and desert show detector-to-detector (D2D) reflectance differences in the VIIRS reflective solar bands, 10 moderate-resolution bands (M-bands, M1to M5, M7 to M11), and three imagery resolution bands (I-bands, I1-I3). More importantly, the D2D differences exhibit an increase in magnitude over time for bands M1 to M5 and I1to I2, which induces noticeable striping and higher uncertainties in the downstream data products. The largest D2D difference is observed in bands M1 and M2, with magnitudes greater than1.8% in trends among the 16 detectors and standard deviations less than 0.12% over time. TheD2D stability assessment results over DCCs are consistent with those observed over the Libya-4desert site. To improve the quality of the calibrated SDR reflectance data, NASA’s VIIRS characterization support team has improved the calibration algorithm to incorporate corrections based on these DCC measurements to mitigate the striping (detector differences) observed in the current version of the SDR. These improvements are planned to be included in the next mission reprocessing of the LSIPS land products.

SNPP VIIRS↗

The Ocean Colour Climate Change Initiative: II. Spatial and Temporal Homogeneity of Satellite Data Retrieval Due to Systematic Effects in Atmospheric Correction Processors

The established procedure to access the quality of atmospheric correction processors and their underlying algorithms is the comparison of satellite data products with related in-situ measurements. Although this approach addresses the accuracy of derived geophysical properties in a straight forward fashion, it is also limited in its ability to catch systematic sensor and processor dependent behaviour of satellite products along the scan-line, which might impair the usefulness of the data in spatial analyses. The Ocean Colour Climate Change Initiative (OC-CCI) aims to create an ocean colour dataset on a global scale to meet the demands of the ecosystem modelling community. The need for products with increasing spatial and temporal resolution that also show as little systematic and random errors as possible, increases. Due to cloud cover, even temporal means can be influenced by along-scanline artefacts if the observations are not balanced and effects cannot be cancelled out mutually. These effects can arise from a multitude of results which are not easily separated, if at all. Among the sources of artefacts, there are some sensor-specific calibration issues which should lead to similar responses in all processors, as well as processor-specific features which correspond with the individual choices in the algorithms. A set of methods is proposed and applied to MERIS data over two regions of interest in the North Atlantic and the South Pacific Gyre. The normalised water leaving reflectance products of four atmospheric correction processors, which have also been evaluated in match-up analysis, is analysed in order to find and interpret systematic effects across track. These results are summed up with a semi-objective ranking and are used as a complement to the match-up analysis in the decision for the best Atmospheric Correction (AC) processor. Although the need for discussion remains concerning the absolutes by which to judge an AC processor, this example demonstrates clearly, that relying on the match-up analysis alone can lead to misjudgement.

Ocean Colour↗

NASA's NPOESS Preparatory Project Science Data Segment: A Framework for Measurement-based Earth Science Data Systems

The NPOESS Preparatory Project (NPP) Science Data Segment (SDS) provides a framework for the future of NASA s distributed Earth science data systems. The NPP SDS performs research and data product assessment while using a fully distributed architecture. The components of this architecture are organized around key environmental data disciplines: land, ocean, ozone, atmospheric sounding, and atmospheric composition. The SDS thus establishes a set of concepts and a working prototypes. This paper describes the framework used by the NPP Project as it enabled Measurement-Based Earth Science Data Systems for the assessment of NPP products.

Schwaller, Mathew R.↗

A Daily Surface Melt Product From Passive Microwave Swath Observations for Arctic Sea Ice Studies

Most passive microwave sea ice data products are produced with daily gridded brightness temperatures. However, a single polar-orbiting passive microwave instrument makes many measurements per day where swaths overlap in the polar regions. These level 1 swath brightness temperature observations can be used to derive information on sub-daily sea ice processes. One such process is the rapid transition of snow and ice between freezing and melting due to diurnal freeze-thaw cycling or brief warming events in the pre-melt season. Here, a new method utilizing the sub-daily variability in swath-to-swath observations is used to produce daily, binary maps of the melting status on Arctic Sea ice using Level 1C brightness temperatures from the Special Sensor Microwave Imager and Sounder (SSM/I-SSMIS) data record. The resulting data set will enable investigations of the frequency, inter-annual variability, and spatial extent of brief surface melting events occurring in the winter and shoulder seasons outside of the traditional summer melt season.

Angela C. Bliss↗

STRUCTURE AND FEEDBACK IN 30 DORADUS. I. OBSERVATIONS

We have completed a new optical imaging and spectrophotometric survey of a 140 x 80 pc{sup 2} region of 30 Doradus centered on R136, covering key optical diagnostic emission lines including H{alpha}, H{beta}, H{gamma}, [O III] {lambda}{lambda}4363, 4959, 5007, [N II] {lambda}{lambda}6548, 6584, [S II] {lambda}{lambda}6717, 6731 [S III] {lambda}6312, and in some locations [S III] {lambda}9069. We present maps of fluxes and intensity ratios for these lines, and catalogs of isolated ionizing stars, elephant-trunk pillars, and edge-on ionization fronts. The final science-quality spectroscopic data products are available to the public. Our analysis of the new data finds that, while stellar winds and supernovae undoubtedly produce shocks and are responsible for shaping the nebula, there are no global spectral signatures to indicate that shocks are currently an important source of ionization. We conclude that the considerable region covered by our survey is well described by photoionization from the central cluster where the ionizing continuum is dominated by the most massive O stars. We show that if 30 Dor were viewed at a cosmological distance, its integrated light would be dominated by its extensive regions of lower surface brightness rather than by the bright, eye-catching arcs.

79 ASTRONOMY AND ASTROPHYSICS↗

AmeriFlux BASE Flux/Met Data QA/QC and Processing (AMF-BASE-QAQC) v1.0.0

The AmeriFlux BASE Flux/Met Data QA/QC and Processing (AMF-BASE-QAQC) code provides tools to review and prepare continuous flux/met data submitted to the AmeriFlux Management Project for publication as the AmeriFlux BASE data product. The code provides 3 core functionalities: Format QA/QC assesses submitted data files for compliance with the required submission format; Data QA/QC assesses the data quality; BASE Publish prepares the data for publication.

Christianson, Danielle↗

Magnetic Gears for a Marine Hydrokinetic Generator Component Model

The goal of this project is to design, fabricate, and test a hermetically sealed 50 kilowatt (kW) multistage magnetically geared generator (MGG). The Component Content Model provides data submitters with an easy and consistent means of uploading data and associated meta data about a component that is currently under development. The data fields include generic information about the component, technology classifications, current costs and performance, proposed target goals, and the environment that the component is operated in. These data are important to DOE and will be used to develop data products that provide quantitative information to guide and support programmatic decisions. Data will also be used by DOE in general assessments of MHK component readiness, performance, costs, and proposed plans. The ultimate goal is to use these data to perform research and tailor programs to best benefit the industry.

16 TIDAL AND WAVE POWER↗

Object storage model for CMS data

In CMS, data access and management is organized around the data-tier model: a static definition of what subset of event information is available in a particular dataset, realized as a collection of files. In previous work, we have proposed a novel data management model that obviates the need for data tiers by exploding files into individual event data product objects. In this work, we estimate the potential savings in data volume based on user analysis patterns.

Smith, Nick↗

The ARM Best Estimate Station-based Surface (ARMBESTNS) Data set

The ARM Best Estimate Station-based Surface (ARMBESTNS) data set merges together key surface measurements from the Southern Great Plains (SGP) sites. It is a twin data product of the ARM Best Estimate 2-dimensional Gridded Surface (ARMBE2DGRID) data set. Unlike the 2DGRID data set, the STNS data are reported at the original site locations and show the original information, except for the interpolation over time. Therefore, users have the flexibility to process the data with the approach more suitable for their applications.

54 ENVIRONMENTAL SCIENCES↗

Data and data retrieval in space astronomy

To illustrate the range of storage and retrieval facilities and data products that are involved in space astronomy, the present situation on data from some instruments on the following missions is presented: Small Astronomy Satellite-B, Orbiting Astronomical Observatory 3, High Energy Astrophysics Observatory 2, International Ultraviolet Explorer, Viking Orbiter, and Solar Maximum Mission. In addition, the Coordinated Data Analysis Workshops conducted at the National Space Science Data Center are outlined to demonstrate the usefulness of building a problem-oriented on-line data base from instruments flown on a number of spacecraft and operating from ground-based facilities.

Vette, J. I.↗

STS-1 orbital trajectory reconstruction using unmodelled acceleration estimation

A postflight trajectory reconstruction and analysis were conducted in order to determine the effects of unmodeled thrusting on the Space Shuttle Orbiter, to generate representative thrusting uncertainties for input to error analyses, and to evaluate the accuracy of the Ancillary trajectory data product and real-time vectors. The methods of selecting appropriate data arcs, time placement of compensation forces, limitations of the orbit determination process, and methods of evaluating solutions obtained from various force combinations are presented. It is shown that the estimation of forces to compensate for uncoupled attitude maneuvers and attitude hold maintenance thrusting significantly improves the postflight reconstruction of Space Shuttle Orbiter trajectories. A reduction of measurement residual statistics due to dynamic model uncertainties yields improved accuracy for postflight orbit determination.

Lacarna, R. J.↗

Mars Observer as a precursor to intensive exploration of Mars

The Mars Observer Mission, to be launched by the United States in September 1992, is designed to perform an extended orbital study of the Martian surface, atmosphere, climate, and gravitational and magnetic fields using a spacecraft in Mars orbit for one Martian year. This information will add to the global data base that is necessary for increasing scientific understanding of Mars, as well as for planning the next stages of intensive exploration of the planet. Future missions will progress from more specific robotic exploration to eventual human exploration, and will require progressively more detailed engineering information. Mars Observer will provide key basic data including planet shape, gravity field, geodetic framework, topography, characteristics of the surface, atmospheric profiles, dust content of the atmosphere, and wind field. Special data products for engineering purposes could be obtained from the currently planned data return, and additional engineering data could be returned by augmentation to the basic Mars Observer's operation.

Cunningham, Glenn E.↗

Usage of Data-Encoded Web Maps with Client Side Color Rendering for Combined Data Access, Visualization and Modeling Purposes

Current approaches to satellite observation data storage and distribution implement separate visualization and data access methodologies which often leads to the need in time consuming data ordering and coding for applications requiring both visual representation as well as data handling and modeling capabilities. We describe an approach we implemented for a data-encoded web map service based on storing numerical data within server map tiles and subsequent client side data manipulation and map color rendering. The approach relies on storing data using the lossless compression Portable Network Graphics (PNG) image data format which is natively supported by web-browsers allowing on-the-fly browser rendering and modification of the map tiles. The method is easy to implement using existing software libraries and has the advantage of easy client side map color modifications, as well as spatial subsetting with physical parameter range filtering. This method is demonstrated for the ASTER-GDEM elevation model and selected MODIS data products and represents an alternative to the currently used storage and data access methods. One additional benefit includes providing multiple levels of averaging due to the need in generating map tiles at varying resolutions for various map magnification levels. We suggest that such merged data and mapping approach may be a viable alternative to existing static storage and data access methods for a wide array of combined simulation, data access and visualization purposes.

Pliutau, Denis↗

Nano-ADEPT Aeroloads Wind Tunnel Test

A wind tunnel test of the Adaptable Deployable Entry and Placement Technology (ADEPT) was conducted in April 2015 at the US Army's 7 by10 Foot Wind Tunnel located at NASA Ames Research Center. Key geometric features of the fabric test article were a 0.7 meter deployed base diameter, a 70 degree half-angle forebody cone angle, eight ribs, and a nose-to-base radius ratio of 0.7. The primary objective of this wind tunnel test was to obtain static deflected shape and pressure distributions while varying pretension at dynamic pressures and angles of attack relevant to entry conditions at Earth, Mars, and Venus. Other objectives included obtaining aerodynamic force and moment data and determining the presence and magnitude of any dynamic aeroelastic behavior (buzz/flutter) in the fabric trailing edge. All instrumentation systems worked as planned and a rich data set was obtained. This paper describes the test articles, instrumentation systems, data products, and test results. Four notable conclusions are drawn. First, test data support adopting a pre-tension lower bound of 10 foot pounds per inch for Nano-ADEPT mission applications in order to minimize the impact of static deflection. Second, test results indicate that the fabric conditioning process needs to be reevaluated. Third, no flutter/buzz of the fabric was observed for any test condition and should also not occur at hypersonic speeds. Fourth, translating one of the gores caused ADEPT to generate lift without the need for a center of gravity offset. At hypersonic speeds, the lift generated by actuating ADEPT gores could be used for vehicle control.

system engineering↗

Restructuring Big Data to Improve Data Access and Performance in Analytic Services Making Research More Efficient for the Study of Extreme Weather Events and Application User Communities

By developing and enhancing various services and tools, the GES DISC provides users with the capability to access and visualize data, and to make comparisons of data from multiple sensor and models via a number of cross-discipline projects. Discovering Data via Faceted Web Interface Web interface to data products and services Search and Download mechanisms Dataset Landing Pages Accessing Data through Interoperable Services: GDS – GrADS Data Server OPeNDAP - Open-source Project for a Network Data Access Protocol WMS – OGC service GIS connector – allowing IS tools to access data easier (coming soon) HTTPS -- direct online access Downloading Data Basics: Subset and egridding Service – Parameter, Spatial, Time, Vertical, Mean averaging, format conversion, and regridding for L3/L4 gridded data Swath Data Subsetter – Parameter, spatial subset of L2 /L1 data. Visualizing Data Online: Giovanni –Visualization and Analysis L3/L4 gridded data AIRS NRT Viewer – AIRS near-real-time DQVis – L2 data quality visualization

data cube↗

Serving NASA GES DISC Multi-Spatiotemporal Earth Science Data to the GIS community

NASA Earth Science (ES) data is essential to a wide range of GIS research and applications. However, for many GIS users, searching, accessing, using and analyzing NASA ES data can be of a great challenge- ranging from the sheer data volumes, types of science parameters, and to the complexity of data encoding formats. As one of the twelve NASA Science Mission Directorate (SMD) Data Centers, Goddard Earth Sciences (GES) Data and Information Services Center (DISC) archives and distributes petabytes of ES parameters covering atmosphere, land, and ocean fields. Most data are multidimensional and multi-spatiotemporal in nature and are encoded in different science data formats (e.g, HDF, HDF-EOS, netCDF, GRIB, binary), which usually contain multiple variables and different metadata information. By far, GES DISC has been developing a number of services and online tools to help GIS users to easily explore our data products. In this presentation, we will describe our ArcGIS-based data accessing and visualization services and portals, which allow users directly exploring the multi-spatiotemporal ES data in ArcGIS clients without having to pre-download/import the data. The ArcGIS services are also compliant with the Open Geospatial Consortium (OGC) Web Coverage Service (WCS) and Web Map Service (WMS) protocols and can be accessed by any other WCS/WMS clients to get customized GES DISC EO data on-the-fly from such services.

Wei, Jennifer↗

Data Preservation: Final Step in the Life Cycle of a Mission

Many NASA Earth Observing System (EOS) have either already reached the end of their active life or are nearing it. Preservmissionsation of data products is a fairly well defined task for the NASA EOS Data Centers or DAACs.The Goddard Earth Sciences Data and Information Services Center (GES-DISC) has implemented a repository system, which is capable of long-term archive of documentation artifacts and other associated digital content. The existing GES-DISC Repository System is based on Fedora Commons, an open-source repository management software, for cost savings and flexibility.The first mission to utilize the GES-DISC Repository System was the High Resolution Dynamics Limb Sounder (HIRDLS) on the Aura spacecraft. Since then, the GES DISC has gathered documentation from the UARS and TOMS into the Repository. The Microwave Limb Sounder (MLS) team has begun delivering some early pre-launch documents to the GES-DISC Repository System as well. Other missions in planning or progress include AIRS, OMI, SORCE, SNPP Sounder, and TRMM.

Johnson, J.↗

Global analyses of nuclear PDFs with heavy-quark and neutrino data

We discuss the two most recent global analyses of nuclear parton distribution functions within the nCTEQ approach. LHC data on $W/Z$-boson, single-inclusive hadron and heavy quark/quarkonium production are shown to not only significantly reduce the gluon uncertainty down to $x\geq10^{-5}$, but to also influence the strange quark density. The latter is further constrained by neutrino deep-inelastic scattering and charm dimuon production data, whose consistency with neutral-current experiments is also re-evaluated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗