SEARCH · Engineering Papers

Results for “complexants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Single-Site Carbon-Supported Metal-Oxo Complexes in Heterogeneous Catalysis: Structure, Reactivity, and Mechanism

When early transition metal complexes are molecularly grafted onto catalyst supports, well-defined, surface-bound species are created, which are highly active and selective single-site heterogeneous catalysts (SSHCs) for diverse chemical transformations. Further, in this minireview, we analyze and summarize a less conventional type of SSHC in which molybdenum dioxo species are grafted onto unusual carbon-unsaturated scaffolds, such as activated carbon, reduced graphene oxide, and carbon nanohorns. The choice of earth-abundant, low-toxicity, versatile metal constituents, and various carbon supports illustrates “catalyst by design” principles and yields insights into new catalytic systems of both academic and technological interest. Here, we summarize experimental and computational investigations of the bonding, electronic structure, reaction scope, and mechanistic pathways of these unusual catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Oxidation of Ammonia Catalyzed by a Molecular Iron Complex: Translating Chemical Catalysis to Mediated Electrocatalysis

Abstract Ammonia is a promising candidate in the quest for sustainable, clean energy. With its capacity to serve as an energy carrier, the oxidation of ammonia opens avenues for carbon‐neutral approaches to address worldwide growing energy needs. We report the catalytic chemical oxidation of ammonia by an Earth‐abundant transition metal complex, trans ‐ [LFe II (MeCN) 2 ][PF 6 ] 2 , where L is a macrocyclic ligand bearing four N ‐heterocyclic carbene (NHC) donors. Using triarylaminium radical cations in MeCN, up to 182 turnovers of N 2 per Fe were obtained from chemical catalysis with an extremely low loading of the Fe catalyst (0.043 mM, 0.004 mol % catalyst). This chemical catalysis was successfully transitioned to mediated electrocatalysis for the oxidation of ammonia. Molecular electrocatalysis by the Fe catalyst and the mediator ( p ‐MeOC 6 H 4 ) 3 N exhibited a catalytic half‐wave potential ( E cat/2 ) of 0.18 V vs [Cp 2 Fe] +/0 in MeCN, and achieved 9.3 turnovers of N 2 at an applied potential of 0.20 V vs [Cp 2 Fe] +/0 at −20 °C in controlled‐potential electrolysis, with a Faradaic efficiency of 75 %. Based on computational results, the catalyst undergoes sequential oxidation and deprotonation steps to form [LFe IV (NH 2 ) 2 ] 2+ , and thereafter bimetallic coupling to form an N−N bond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

A Four‐Coordinate Pr 4+ Imidophosphorane Complex

Abstract The imidophosphorane ligand, [NP t Bu 3 ] − ( t Bu= tert ‐butyl), enables isolation of a pseudo‐tetrahedral, tetravalent praseodymium complex, [Pr 4+ (NP t Bu 3 ) 4 ] ( 1‐Pr ), which is characterized by a suite of physical characterization methods including single‐crystal X‐ray diffraction, electron paramagnetic resonance, and L 3 ‐edge X‐ray near‐edge spectroscopies. Variable‐temperature direct‐current magnetic susceptibility data, supported by multiconfigurational quantum chemical calculations, demonstrate that the electronic structure diverges from the isoelectronic Ce 3+ analogue, driven by increased crystal field. The four‐coordinate environment around Pr 4+ in 1‐Pr , which is unparalleled in reported extended solid systems, provides a unique opportunity to study the interplay between crystal field splitting and spin‐orbit coupling in a molecular tetravalent lanthanide within a pseudo‐tetrahedral coordination geometry.

Boggiano, Andrew C.↗

DOE OSTI2024

Hydrogenation Reactions with Heterobimetallic Complexes

Hydrogenations are fundamentally and industrially important reactions that are atom economical paths to synthesize value‐added products from feedstock chemicals. The cooperative effects of two or more metal centers in multimetallic active sites is a successful strategy to activate small molecules and facilitate catalytic reactions, and this strategy has been recently applied to catalytic hydrogenation reactions. Furthermore, heterobimetallic complexes have been well‐documented to provide novel reaction pathways and improved selectivity, compared to their homo‐bimetallic and monometallic analogues. This minireview provides a historical perspective on the development of heterobimetallic catalysts for the hydrogenation of unsaturated substrates and describes recent developments in this burgeoning research area.

catalysis↗

DOE OSTI2025

Leveraging Electrons for Electrochemical CO 2 Capture Using a Hemi‐Labile Iron Complex

Climate change, driven by anthropogenic carbon emissions, demands urgent action to prevent a 2050 tipping point. With CO 2 levels at 427 ppm (50% above pre-industrial levels), deploying energy-efficient carbon capture technologies is crucial. Electrochemical carbon capture processes that have been touted to have the potential to meet these needs rely on the applied cell voltage, and electron utilization (CO 2 molecules separated per electron), which has generally been asserted to have a theoretical limit of one. Here, we introduce an electron-leveraging strategy to enhance electron utilization beyond this limit to 1.43 by employing Fe-EDDHA, a redox-active coordination complex having a ligand with multiple hemi-labile coordination sites. The reversibility and robustness of the system were enabled by the efficient prevention of CO 2 reduction upon the introduction of nicotinamide as a guardian of the iron(2+) center. The proof-of-concept cyclic system exhibits a minimum operational energy of 22.6 kJ e mol −1 and an average of 63.7 kJ e mol −1 over 29 cycles, using a simulated flue gas (15% CO 2 ). Our electron-leveraging strategy holds promise for advancing energy-efficient electrochemical carbon capture technologies, and offers an alternative to prevalent redox potential shifting methods proposed to mitigate undesired electron transfer reactions in redox-active materials across diverse operational conditions.

carbon storage↗

DOE OSTI2022

Catalytic Hydrogenolysis of the Pt-OPh Bond of a Molecular Pt(II) Complex using Silica Supported Pd, Rh and Pt Nanoparticles

We report silica-supported Pd, Rh and Pt metal nanoparticles catalyze the hydrogenolysis of the Pt-OPh bond of ( t bpy)Pt(OPh)Cl to release PhOH. Based on kinetic studies monitored by 1 H NMR spectroscopy, the reactivity trend is Pd>Rh>Pt. Kinetic studies with Pd/SiO 2 are consistent with a first-order dependence on the catalyst and the molecular Pt(II) complex ( t bpy)Pt(OPh)Cl. Using TEM-EDS mapping and ICP-OES measurements of a recovered Pd catalyst, after 1hour of hydrogenolysis of ( t bpy)Pt(OPh)Cl, approximately 10–16 % Pt deposition (relative to Pd mol %) on the Pd/SiO 2 surface was quantified.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Influence of Polymer and Support Interactions on the Electrocatalytic Properties of Heterogenized Molecular Complexes

Heterogenized molecular catalysts have been the subject of increasing interest in the context of electrochemical small molecule activation due to the possibility of active site homogeneity and tunability, which can surpass many nanostructured materials. When molecular catalysts strongly interact with carbon supports through π–π interactions, they tend to show higher selectivity and activity during heterogeneous electrochemical reactions. Indeed, ligand modifications in the secondary sphere that allow for more π–π overlap between catalyst and carbon support often show improved performance. Interactions between catalyst and polymer binder are also a possible modulus of control in these reactions, either through coordinating moieties that interact with active sites or through control over substrate or product transport. Finally, the covalent linking of molecular complexes onto carbon materials has also been shown to result in high activity and stability. Recent advances in the use of carbon supports, both through covalent and non-covalent interactions, and polymers to alter small molecule activation by heterogenized molecular catalysts are summarized in this Perspective.

Johnson, Elizabeth K. [University of Virginia, Cha↗

DOE OSTI2022

Binding, Release and Functionalization of Intact Pnictogen Tetrahedra Coordinated to Dicopper Complexes

The bridging MeCN ligand in the dicopper(I) complexes [(DPFN)Cu 2 (μ,η 1 : η 1 -MeCN)][X] 2 (X=weakly coordinating anion, NTf 2 (1 a), FAl[OC 6 F 10 (C 6 F 5 )] 3 (1 b), Al[OC(CF 3 ) 3 ] 4 (1 c)) was replaced by white phosphorus (P 4 ) or yellow arsenic (As 4 ) to yield [(DPFN)Cu 2 (μ,η 2 : η 2 -E 4 )][X] 2 (E=P (2 a-c), As (3 a-c)). The molecular structures in the solid state reveal novel coordination modes for E 4 tetrahedra bonded to coinage metal ions. Experimental data and quantum chemical computations provide information concerning perturbations to the bonding in coordinated E 4 tetrahedra. Reactions with N-heterocyclic carbenes (NHCs) led to replacement of the E 4 tetrahedra with release of P 4 or As 4 and formation of [(DPFN)Cu 2 (μ,η 1 : η 1 - Me NHC)][X] 2 (4 a,b) or to an opening of one E-E bond leading to an unusual E 4 butterfly structural motif in [(DPFN)Cu 2 (μ,η 1 : η 1 -E 4 Dipp NHC)][X] 2 (E=P (5 a,b), E=As (6)). With a cyclic alkyl amino carbene ( Et CAAC), cleavage of two As-As bonds was observed to give two isomers of [(DPFN)Cu 2 (μ,η 2 : η 2 -As 4 Et CAAC)][X] 2 (7 a,b) with an unusual As 4 -triangle+1 unit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Discovery of Complex Binding and Reaction Mechanisms from Ternary Gases in Rare Earth Metal–Organic Frameworks

Understanding the selectivity of metal–organic frameworks (MOFs) to complex acid gas streams will enable their use in industrial applications. In this study, ab initio molecular dynamic simulations (AIMD) were used to simulate ternary gas mixtures (H 2 O-NO 2 -SO 2 ) in rare earth 2,5-dihydroxyterephthalic acid (RE-DOBDC) MOFs. Stronger H 2 O gas-metal binding arose from thermal vibrations in the MOF sterically hindering access of SO 2 and NO 2 molecules to the metal sites. Gas-gas and gas-linker interactions within the MOF framework resulted in the formation of multiple secondary gas species including HONO, HNO 2 , NOSO, and HNO 3 ⁻. Four gas adsorption sites were identified along with a new de-protonation reaction mechanism not observable through experiment. This study not only provides valuable information on competitive gas binding energies in the MOF, but it also provides important chemical insights into transient chemical reactions and mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Persistence of Methionine Side Chain Mobility at Low Temperatures in a Nine‐Residue Low Complexity Peptide, as Probed by 2 H Solid‐State NMR

Abstract Methionine side chains are flexible entities which play important roles in defining hydrophobic interfaces. We utilize deuterium static solid‐state NMR to assess rotameric inter‐conversions and other dynamic modes of the methionine in the context of a nine‐residue random‐coil peptide (RC9) with the low‐complexity sequence GGKGMGFGL. The measurements in the temperature range of 313 to 161 K demonstrate that the rotameric interconversions in the hydrated solid powder state persist to temperatures below 200 K. Removal of solvation significantly reduces the rate of the rotameric motions. We employed 2 H NMR line shape analysis, longitudinal and rotation frame relaxation, and chemical exchange saturation transfer methods and found that the combination of multiple techniques creates a significantly more refined model in comparison with a single technique. Further, we compare the most essential features of the dynamics in RC9 to two different methionine‐containing systems, characterized previously. Namely, the M35 of hydrated amyloid‐β 1–40 in the three‐fold symmetric polymorph as well as Fluorenylmethyloxycarbonyl (FMOC)‐methionine amino acid with the bulky hydrophobic group. The comparison suggests that the driving force for the enhanced methionine side chain mobility in RC9 is the thermodynamic factor stemming from distributions of rotameric populations, rather than the increase in the rate constant.

Vugmeyster, Liliya↗

DOE OSTI2020

A Woven Supramolecular Metal‐Organic Framework Comprising a Ruthenium Bis(terpyridine) Complex and Cucurbit[8]uril: Enhanced Catalytic Activity toward Alcohol Oxidation

Abstract The self‐assembly of a diamondoid woven supramolecular metal–organic framework wSMOF‐1 has been achieved from intertwined [Ru(tpy) 2 ] 2+ (tpy=2,2′,6′,2′′‐terpyridine) complex M1 and cucurbit[8]uril (CB[8]) in water, where the intermolecular dimers formed by the appended aromatic arms of M1 are encapsulated in CB[8]. wSMOF‐1 exhibits ordered pore periodicity in both water and the solid state, as confirmed by a combination of 1 H NMR spectroscopy, UV‐vis absorption, isothermal titration calorimetry, dynamic light scattering, small angle X‐ray scattering and selected area electron diffraction experiments. The woven framework has a pore aperture of 2.1 nm, which allows for the free access of both secondary and primary alcohols and tert ‐butyl hydroperoxide (TBHP). Compared with the control molecule [Ru(tpy) 2 ]Cl 2 , the [Ru(tpy) 2 ] 2+ unit of wSMOF‐1 exhibits a remarkably higher heterogeneous catalysis activity for the oxidation of alcohols by TBHP in n ‐hexane. For the oxidation of 1‐phenylethan‐1‐ol, the yield of acetophenone was increased from 10 % to 95 %.

Zhang, Yun‐Chang↗

DOE OSTI2024

Multi‐electron Oxidation of Ce(III) Complexes Facilitated by Redox‐Active Ligands

A family of cerium complexes featuring a redox-active ligand in different oxidation states has been synthesized, including the the iminosemiquinone (isq) 1− compound, Ce( dipp isq) 3 (1-Ceisq), and the amidophenolate (ap) 2− species Ce III ( dipp ap) 3 K 3 (2-Ceap), [Ce III ( dipp ap) 3 K][K(18-c-6)] 2 (2-Ceap 18c6), and [Ce III ( dipp ap) 3 K][K(15-c-5) 2 ] 2 (2-Ceap 15c5). Treating 2-Ceap 15c5 with dioxogen furnishes the cerium(IV) derivative [Ce IV ( dipp ap) 3 ][K(15-c-5) 2 ] 2 (3-Ceap 15c5), and an analogous synthesis can be used to generate [Ce IV ( dipp ap) 3 ][K(crypt)] 2 (3-Ceap crypt). Similarly, addition of hexamethyldisiloxane produces an interesting bis(amidophenolate) species, [(Me 3 SiO) 2 Ce IV ( dipp ap) 2 ][K(15-c-5) 2 ] 2 (4-CeOSiMe 3 ). In conclusion, full spectroscopic and structural characterization of each derivative was performed to establish the oxidation states of both the ligands and the cerium ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Crystal Structures of Diaryl Hydrazone and Sulfone Stabilizers in Complex with an Amyloidogenic Light Chain Reveal an Alternate Ligand‐Binding Cavity

Abstract Stabilization of amyloidogenic immunoglobulin light chains (LCs) by binding of small molecule “kinetic stabilizers” is under development as a novel treatment for light chain amyloidosis. From a high‐throughput screen, we previously identified 16 full‐length (FL) LC stabilizers from five distinct chemotypes. We then obtained structural biological information on two classes of hits, coumarins and hydantoins, revealing that both chemotypes bind to a pocket at the V L −V L interface of the FL LC dimer. Here, we report crystal structures of three screening hits from two other chemotypes, diaryl hydrazones and sulfones, in complex with an amyloidogenic FL LC. While two of these hits bind to the previously identified pocket, one diaryl hydrazone binds to a different pocket bisected by the C 2 symmetry axis of the dimer. These data further expand on the FL LC stabilizer‐binding surface that could be used in design of more potent FL LC aggregation inhibitors.

Chemistry↗

DOE OSTI2025

Projector‐Based Quantum Embedding Study of Iron Complexes

Projection‐based embedding theory (PBET) is used to calculate and assess the challenging spin‐crossover energies for a selection of small Fe‐containing systems by embedding the metal center into the frozen potential of the ligands. MP2, CCSD, and CCSD(T) are embedded in potentials from the SCAN and r 2 SCAN functionals and compared with the canonical values for the constituent methods and previously reported reference values. Considering the PBET calculations as a correction for the underlying DFT, the embedding calculations are able to provided improvement for most cases. In some cases, the PBET methods are able to compensate for limitations in the wave function methods and produce results similar to more rigorous calculations from the literature. For the systems with spin‐crossover energies near zero, the current methodology fails to provide consistent improvement. In conclusion, the isolated recalculation of the electronic structure around the metal center when embedded into a DFT treatment of the ligand field shows promise as a pragmatic and lower cost treatment compared to the canonical treatment of the whole system of the difficult class of spin‐crossover complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Anatomy of an agricultural antagonist: Feeding complex structure and function of three xylem sap‐feeding insects illuminated with synchrotron‐based 3D imaging

Abstract Many insects feed on xylem or phloem sap of vascular plants. Although physical damage to the plant is minimal, the process of insect feeding can transmit lethal viruses and bacterial pathogens. Disparities between insect‐mediated pathogen transmission efficiency have been identified among xylem sap‐feeding insects; however, the mechanistic drivers of these trends are unclear. Identifying and understanding the structural factors and associated integrated functional components that may ultimately determine these disparities are critical for managing plant diseases. Here, we applied synchrotron‐based X‐ray microcomputed tomography to digitally reconstruct the morphology of three xylem sap‐feeding insect vectors of plant pathogens: Graphocephala atropunctata (blue‐green sharpshooter; Hemiptera, Cicadellidae) and Homalodisca vitripennis (glassy‐winged sharpshooter; Hemiptera, Cicadellidae), and the spittlebug Philaenus spumarius (meadow spittlebug; Hemiptera, Aphrophoridae). The application of this technique revealed previously undescribed anatomical features of these organisms, such as key components of the salivary complex. The visualization of the 3D structure of the precibarial valve led to new insights into the mechanism of how this structure functions. Morphological disparities with functional implications between taxa were highlighted as well, including the morphology and volume of the cibarial dilator musculature responsible for extracting xylem sap, which has implications for force application capabilities. These morphological insights will be used to target analyses illuminating functional differences in feeding behavior.

3D imaging↗

DOE OSTI2020

On the Use of Surfactant-Complexed Chitosan for Toughening 3D Printed Polymethacrylate Composites

This work reports a simple approach to prepare toughened 3D-printed polymethacrylate (PMA) composites using surfactant-modified chitosan (SMCS) particles at loadings between 2–10 wt%. Chitosan (CS) is modified with anionic surfactant, sodium dodecyl sulfate, via ionic complexation to facilitate compatibility and dispersion of CS to PMA matrix by non-covalent interactions between the components. The study successfully demonstrates high-accuracy 3D printing of composites with significant improvements in the overall mechanical properties. The composite with the best loading of 8 wt% SMCS shows a tensile modulus of 1.23 ± 0.05 GPa, a tensile strength at 49.8 ± 0.96 MPa, a yield stress at 33.3 ± 1.48 MPa, and a strain-at-ailure 10.3 ± 0.61%, which are 45%, 40%, 32%, and 68% higher than neat PMA, respectively. This provides a significant improvement in toughness at 4.92 ± 0.55 MJ m -3 for the composite, 184% higher than that of neat PMA. The marked increase in toughness is due to enhanced filler-matrix interactions which improve the ability of the 3D printed composite to absorb energy under tensile load. The results from this work provide new understandings into the strategies for design and preparation of stereolithography 3D printed materials reinforced with toughening fillers from renewable resources.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Ternary complexes of isopentenyl phosphate kinase from Thermococcus paralvinellae reveal molecular determinants of non‐natural substrate specificity

Abstract Isopentenyl phosphate kinases (IPKs) have recently garnered attention for their central role in biocatalytic “isoprenol pathways,” which seek to reduce the synthesis of the isoprenoid precursors to two enzymatic steps. Furthermore, the natural promiscuity of IPKs toward non‐natural alkyl‐monophosphates (alkyl‐Ps) as substrates has hinted at the isoprenol pathways' potential to access novel isoprenoids with potentially useful activities. However, only a handful of IPK crystal structures have been solved to date, and even fewer of these contain non‐natural substrates bound in the active site. The current study sought to elucidate additional ternary complexes bound to non‐natural substrates using the IPK homolog fromThermococcus paralvinellae(TcpIPK). Four such structures were solved, each bound to a different non‐natural alkyl‐P and the phosphoryl donor substrate/product adenosine triphosphate (ATP)/adenosine diphosphate (ADP). As expected, the quaternary, tertiary, and secondary structures ofTcpIPK closely resembled those of IPKs published previously, and kinetic analysis of a novel alkyl‐P substrate highlighted the potentially dramatic effects of altering the core scaffold of the natural substrate. Even more interesting, though, was the discovery of a trend correlating the position of two α helices in the active site with the magnitude of an IPK homolog's reaction rate for the natural reaction. Overall, the current structures ofTcpIPK highlight the importance of continued structural analysis of the IPKs to better understand and optimize their activity with both natural and non‐natural substrates.

Biochemistry & Molecular Biology↗

DOE OSTI2021

Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) peak intensity normalization for complex mixture analyses

Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) is a preferred technique for analyzing complex organic mixtures. Currently, there is no consensus normalization approach, nor an objective method for selecting one, for quantitative analyses of FT-ICR-MS data. We investigate a method to evaluate and score the amount of bias various normalization approaches introduce into the data. We evaluate the ability of the Statistical Procedure for the Analysis of Normalization Strategies (SPANS) to guide selection of appropriate normalization approaches for two different FT-ICR-MS datasets. Further, we test the robustness of SPANS results to changes in SPANS parameter values and assess the impact of using various normalization approaches on downstream statistical analyses. The normalization approach identified by SPANS differed for the two datasets. Normalization methods impacted the statistical significance of peaks differently, underscoring the importance of carefully evaluating potential methods. More consistent SPANS scores resulted when at least 120 significant peaks are used, where larger sets of peaks were obtained by increasing the p-value threshold. Interestingly, we show that Total Sum Scaling and highest peak normalization, used in previous studies, underperformed relative to SPANS-recommended normalization approaches. While there is no single, best normalization method for all datasets, SPANS provides a mechanism to identify an appropriate normalization method for analyzing FT-ICR-MS data quantitatively. As a result, the number of peaks used in the background distributions of SPANS contributes more significantly to the reproducibility of results than the p-value thresholds used to obtain those peaks.

47 OTHER INSTRUMENTATION↗