Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coded source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Thermal hydraulic model of the molten salt reactor experiment with the NEAMS system analysis module

System analysis codes have a long history of providing best-estimate and conservative safety analysis for both light water and advanced reactor technologies, including molten salt reactors. As interest continues to expand with advanced reactor concepts, system analysis codes will need revisions to accommodate the behavior of these technologies. Legacy system analysis codes will need to be updated to the latest numerical techniques to shorten execution time and increase the accuracy of results. One example of a modern system analysis code that already encompasses these characteristics is the System Analysis Module (SAM). One key objective of this paper was to review available information for system code modeling of the Molten Salt Reactor Experiment (MSRE) from sources in the open literature and collect the information from these open sources in one place for the first time. This supports the potential objective of developing an open specification for system code analysis for MSRE steady state and transients with and without reactor kinetics. Data from actual MSRE tests will serve as the basis for code-to-code comparison exercises, including the MSRE zero power physics tests, the fuel pump start-up and coast down tests, and the natural circulation transient. The objective is to produce a code-to-code benchmark with a standardized set of comparison problems, recognizing the limitations of the original data. To demonstrate an initial application of this objective and the usefulness of compiling this open data, two Molten Salt Reactor Experiment (MSRE)-related models were developed to evaluate SAM for liquid fueled molten salt reactors. One model was the SAM MSRE hydraulic mockup, which provided experimental data for pressure drop measurements. The second model was the complete MSRE primary loop. The MSRE primary loop model incorporated a fluoride salt fuel/coolant with heat transfer in both the core and heat exchanger. For both the hydraulic mockup and MSRE primary loop models, a holistic 1-D system description was built using open documentation, an open description that can be readily modified and applied for any system analysis code. SAM results for the pressure drop of the hydraulic mockup model were within 6% with measurements. Coolant temperatures for the primary loop model matched the expected axial change in temperature from historical calculations. Using alternative coolant properties obtained from the literature, corresponding to salts with different actinide contents, returned similar trends in core temperature profiles. A thermal hydraulic demonstration of a loss-of-flow transient showed the importance of coupling SAM thermal hydraulic analysis to neutronics. Here, this coupling is essential for simulating MSR transients with system analysis codes.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

RELATIVISTIC BROADENING OF IRON EMISSION LINES IN A SAMPLE OF ACTIVE GALACTIC NUCLEI

We present a uniform X-ray spectral analysis of eight type-1 active galactic nuclei that have been previously observed with relativistically broadened iron emission lines. Utilizing data from the XMM-Newton European Photon Imaging Camera (EPIC-pn) we carefully model the spectral continuum, taking complex intrinsic absorption and emission into account. We then proceed to model the broad Fe K{alpha} feature in each source with two different accretion disk emission line codes, as well as a self-consistent, ionized accretion disk spectrum convolved with relativistic smearing from the inner disk. Comparing the results, we show that relativistic blurring of the disk emission is required to explain the spectrum in most sources, even when one models the full reflection spectrum from the photoionized disk.

79 ASTRONOMY AND ASTROPHYSICS↗

Accelerated coupled Monte Carlo-Thermal hydraulic calculations using a hybrid GTF-diffusion-based prediction block: first results

Accurate predictions of spatial power and temperature distributions require the coupling of a neutron transport solver with a thermal-hydraulic (TH) feedback. Nowadays, Monte Carlo (MC) codes are widely coupled to TH solvers, typically via a Picard iteration (PI) method, due to the higher fidelity that such frameworks can produce. To speed up a PI, a prediction step can produce an improved initial guess for a source distribution and feed it to the MC code. Recent work investigated a prediction step that uses generalized transfer functions (GTFs) to predict the macroscopic cross sections' variations following a perturbation in TH properties, such as coolant density. The previous method also relied on first order perturbation (FOP) theory to predict perturbed power profiles, rather than using an expensive MC iterate. The implemented FOP method relied on generating a fission matrix from which the forward and adjoint Eigenmodes were extracted and later used to for power calculations. The generation of the fission matrix can introduce a significant computational overhead, therefore undermining the performance of the proposed hybrid technique when applied to high-dimensional problems, e.g., full core calculations. This work attempts to improve the GTF-FOP prediction step by replacing the FOP solver with a nodal diffusion solver, thus eliminating the need to calculate a fission matrix. The GTF-diffusion step was tested for various moderator density perturbations. In each case, the predicted power distribution showed good agreement with the reference case. The latter is attributed to the generally good prediction of most spatially distributed macroscopic cross sections, except the transport cross section, which will become the focus of future work. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Accelerated Coupled Monte Carlo-Thermal Hydraulic Calculations using a Hybrid GTF-Diffusion-based Prediction Block: First Results

Accurate predictions of spatial power and temperature distributions require the coupling of a neutron transport solver with a thermal-hydraulic (TH) feedback. Nowadays, Monte Carlo (MC) codes are widely coupled to TH solvers, typically via a Picard iteration (PI) method, due to the higher fidelity that such frameworks can produce. To speed up a PI, a prediction step can produce an improved initial guess for a source distribution and feed it to the MC code. Recent work [1, 2] investigated a prediction step that uses generalized transfer functions (GTFs) to predict the macroscopic cross sections’ variations following a perturbation in TH properties, such as coolant density. The previous method also relied on first order perturbation (FOP) theory to predict perturbed power profiles, rather than using an expensive MC iterate. The implemented FOP method relied on generating a fission matrix from which the forward and adjoint eigenmodes were extracted and later used to for power calculations. The generation of the fission matrix can introduce a significant computational overhead, therefore undermining the performance of the proposed hybrid technique when applied to high-dimensional problems, e.g., full core calculations. This work attempts to improve the GTF-FOP prediction step by replacing the FOP solver with a nodal diffusion solver, thus eliminating the need to calculate a fission matrix. The GTF-diffusion step was tested for various moderator density perturbations. In each case, the predicted power distribution showed good agreement with the reference case. The latter is attributed to the generally good prediction of most spatially distributed macroscopic cross sections, except the transport cross section, which will become the focus of future work.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

ADAPTIVE SURROGATES WITHIN THE RAVEN FRAMEWORK FOR DYNAMIC PROBABILISTIC RISK ASSESSMENT ANALYSIS

The RAVEN code has been under development at the Idaho National Laboratory since 2012. Its main goal is to create a multi-purpose platform for the deploying of all the capabilities needed for Probabilistic Risk Assessment (PRA), Uncertainty Quantification (UQ), data mining analysis and optimization studies. RAVEN has demonstrated a good level of maturity in terms of state-of-art and advanced analysis methodologies. In the past year the RAVEN code has been released as open-source project and is available to download (raven.inl.gov) free of charge. The main subject of this paper is to present a new system within the RAVEN framework to drastically accelerate PRA and UQ analysis using acceleration schemes based on surrogate modeling. This system is based on the heavy usage of surrogate modeling and artificial intelligence algorithms, able to emulate the response of a physical system in closed domains (domains where the surrogate models have been constructed from). The aim of this paper is to show to the community how the employment of surrogate modeling techniques can be a viable solution for the current and future challenges in terms of PRA, UQ and Safety Margins characterizations. In addition, in this manuscript it is presented the construction of a RAVEN new entity named “HybridModel” that is aimed to switch between a high-fidelity code and its linked surrogate, accelerating the PRA and UQ processes without largely reducing the accuracy of the results of the analyses. All these new capabilities will be shown with an application example about a Station Black Out scenario for a prototypical Pressurized Water Reactor (modeled with RELAP5-3D).

97 MATHEMATICS AND COMPUTING↗

Model Data for the Mesh Convergence Study Demonstrating Benefits of Mixed-polyhedral Mesh in Integrated Hydrology Simulations

This archived model data is related to a study introducing a unique method that employs a stream-aligned mixed-polyhedral mesh to effectively and accurately represent river valleys, stream corridors, and narrow engineered channels in integrated hydrology simulations. The study finds that utilizing stream-aligned mixed-polyhedral meshes in integrated hydrology simulations achieves accuracy on par with a finely refined TIN-based mesh while markedly diminishing computational costs. This archive contains scripts and data files needed to generate the ATS model input, including mesh and ATS input files, for all mesh scenarios using the Watershed Workflow package. Additionally, this archive also provides key outputs from the model simulations that are used in the analysis and post-processing scripts to reproduce figures in the manuscript. The Watershed Workflow package is implemented in Python3. The Jupyter notebooks can be executed through multiple open-source tools, for example, Anaconda Jupyter Lab, VS Studio Code, etc. Other data files include CSV and HDF5 files, which can be read through Python scripts. The input files for the ATS model, open-source integrated hydrology, and transport model are in XML format and can be edited in any commonly used text editors.

54 ENVIRONMENTAL SCIENCES↗

Modeling the Effects of Artificial Drainage on Agriculture-dominated Watersheds using a Fully Distributed Integrated Hydrology Model: Datasets, scripts, model files

This model-data archive supports the research paper that demonstrates the integration of agricultural drainage features—specifically, narrow engineered ditches and tile drains—into a fully distributed, basin-scale integrated surface-subsurface hydrology model (ISSHM), Amanzi-ATS. The model employs innovative computational meshes aligned with agricultural ditches and incorporates the physically based Hooghoudt's drainage equation to simulate tile drainage, offering a novel strategy that enhances the accuracy of hydrological simulations.The archived dataset includes input parameters, model configurations, and select simulation outputs for the Amanzi-ATS model that successfully captured the streamflow patterns in the Portage River Watershed as validated by USGS gauge readings. Jupyter notebook for the preparation of model inputs and post-processing of outputs are also included. The model's predictive performance achieved a normalized Kling-Gupta Efficiency (KGE) of 0.81, surpassing SWAT without the necessity for site-specific calibration.The Amanzi-ATS model presented in this modeL-data archive allows for numerical experiments to explore the shifts in the flow structure under different drainage scenarios. As a tool for advancing the understanding of distributed hydrological responses and nutrient cycling, this archived model provides valuable insights for researchers, modelers, and decision-makers involved in watershed management and environmental modeling.The Watershed Workflow package is implemented in Python3. The Jupyter notebooks can be executed through multiple open-source tools, for example, Anaconda Jupyter Lab, VS Studio Code, etc. Other data files include CSV and HDF5 files, which can be read through Python scripts. The input files for the ATS model, open-source integrated hydrology, and transport model, are in XML format and can be edited in any commonly used text editors.

54 ENVIRONMENTAL SCIENCES↗

Developing the science and technology for the Material Plasma Exposure eXperiment

Linear plasma generators are cost effective facilities to simulate divertor plasma conditions of present and future fusion reactors. They are used to address important R&D gaps in the science of plasma material interactions and towards viable plasma facing components for fusion reactors. Next generation plasma generators have to be able to access the plasma conditions expected on the divertor targets in ITER and future devices. The steady-state linear plasma device MPEX will address this regime with electron temperatures of 1–10 eV and electron densities of $10^{21}{\text{}}\!-\!10^{20}$ ${\rm m}^{-3}$. The resulting heat fluxes are about 10 MW ${\rm m}^{-2}$ . MPEX is designed to deliver those plasma conditions with a novel Radio Frequency plasma source able to produce high density plasmas and heat electron and ions separately with electron Bernstein wave (EBW) heating and ion cyclotron resonance heating with a total installed power of 800 kW. The linear device Proto-MPEX, forerunner of MPEX consisting of 12 water-cooled copper coils, has been operational since May 2014. Its helicon antenna (100 kW, 13.56 MHz) and EC heating systems (200 kW, 28 GHz) have been commissioned and 14 MW ${\rm m}^{-2}$ was delivered on target. Furthermore, electron temperatures of about 20 eV have been achieved in combined helicon and ECH heating schemes at low electron densities. Overdense heating with EBW was achieved at low heating powers. The operational space of the density production by the helicon antenna was pushed up to $1.1 \times 10^{20}$ ${\rm m}^{-3}$ at high magnetic fields of 1.0 T at the target. Finally, the experimental results from Proto-MPEX will be used for code validation to enable predictions of the source and heating performance for MPEX. MPEX, in its last phase, will be capable to expose neutron-irradiated samples. In this concept, targets will be irradiated in ORNL's High Flux Isotope Reactor and then subsequently exposed to fusion reactor relevant plasmas in MPEX.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Sensitivity of low energy brachytherapy Monte Carlo dose calculations to uncertainties in human tissue composition

Purpose: The objective of this work is to assess the sensitivity of Monte Carlo (MC) dose calculations to uncertainties in human tissue composition for a range of low photon energy brachytherapy sources: {sup 125}I, {sup 103}Pd, {sup 131}Cs, and an electronic brachytherapy source (EBS). The low energy photons emitted by these sources make the dosimetry sensitive to variations in tissue atomic number due to the dominance of the photoelectric effect. This work reports dose to a small mass of water in medium D{sub w,m} as opposed to dose to a small mass of medium in medium D{sub m,m}. Methods: Mean adipose, mammary gland, and breast tissues (as uniform mixture of the aforementioned tissues) are investigated as well as compositions corresponding to one standard deviation from the mean. Prostate mean compositions from three different literature sources are also investigated. Three sets of MC simulations are performed with the GEANT4 code: (1) Dose calculations for idealized TG-43-like spherical geometries using point sources. Radial dose profiles obtained in different media are compared to assess the influence of compositional uncertainties. (2) Dose calculations for four clinical prostate LDR brachytherapy permanent seed implants using {sup 125}I seeds (Model 2301, Best Medical, Springfield, VA). The effect of varying the prostate composition in the planning target volume (PTV) is investigated by comparing PTV D{sub 90} values. (3) Dose calculations for four clinical breast LDR brachytherapy permanent seed implants using {sup 103}Pd seeds (Model 2335, Best Medical). The effects of varying the adipose/gland ratio in the PTV and of varying the elemental composition of adipose and gland within one standard deviation of the assumed mean composition are investigated by comparing PTV D{sub 90} values. For (2) and (3), the influence of using the mass density from CT scans instead of unit mass density is also assessed. Results: Results from simulation (1) show that variations in the mean compositions of tissues affect low energy brachytherapy dosimetry. Dose differences between mean and one standard deviation of the mean composition increasing with distance from the source are observed. It is established that the {sup 125}I and {sup 131}Cs sources are the least sensitive to variations in elemental compositions while {sup 103}Pd is most sensitive. The EBS falls in between and exhibits complex behavior due to significant spectral hardening. Results from simulation (2) show that two prostate compositions are dosimetrically equivalent to water while the third shows D{sub 90} differences of up to 4%. Results from simulation (3) show that breast is more sensitive than prostate with dose variations of up to 30% from water for 70% adipose/30% gland breast. The variability of the breast composition adds a {+-}10% dose variation. Conclusions: Low energy brachytherapy dose distributions in tissue differ from water and are influenced by density, mean tissue composition, and patient-to-patient composition variations. The results support the use of a dose calculation algorithm accounting for heterogeneities such as MC. Since this work shows that variations in mean tissue compositions affect MC dosimetry and result in increased dose uncertainties, the authors conclude that imaging tools providing more accurate estimates of elemental compositions such as dual energy CT would be beneficial.

60 APPLIED LIFE SCIENCES↗

TH-E-BRE-06: Challenges in the Dosimetry of Flattening Filter Free Beams

Purpose: In current dosimetry protocols [AAPM TG51, IAEA TRS-389] the beam quality correction factor kQ and the water-to-air restricted mass collision stopping-power ratio SPR are related to beam quality specifiers %dd(10){sub x} respectively TPR{sub 20,10} Determining kQ and SPR using these regular beam quality specifiers for conventional accelerators (WFF) and flattening filter free accelerators (FFF) similarly could lead to systemic bias.The influence of the flattening filter on the relationship between various beam quality specifiers and SPR respectively k{sub Q} was studied using Monte Carlo simulations with realistic beam sources. Methods: All Monte Carlo simulations were performed using the BEAMnrc/EGSnrc code system. Radiation transport through nine linear accelerator heads modeled according to technical drawings given by the manufactures and a {sup 60} Co therapy source was simulated with BEAMnrc and then used as a radiation source for further simulations. FFF beam sources were implemented by removing the fattening filter from the WFF model. SPR was calculated applying the user code SPRRZnrc. The mean photon energy below the accelerator head and the mean energies of photons and electrons at the measuring point within the water phantom were calculated using FLURZnrc. Dose calculations within a small water voxel and the thimble ionization chamber PTW-31010 in a water depth of 10 cm were made using the egs-chamber code. Results: SPR and k{sub Q} as a function of fluence spectra based beam quality specifiers as well as conventional beam quality specifiers differ systematically between FFF and WFF beams. According to the results the specifier %dd(10){sub x} revealed the smallest deviation (max. 0.4%) between FFF and WFF beams. Conclusion: The results show that %dd(10){sub x} is an acceptable beam quality specifier for FFF beams. Nevertheless the results confirm the expected bias between FFF and WFF beams which must by further investigated.

07 ISOTOPE AND RADIATION SOURCES↗

Panel discussion: Challenges and improvements in accident dose analysis; Regulatory and industry perspective

Full text of publication follows. Design basis accident (DBA) analyses are one of several ways nuclear power plant licensees demonstrate, and the U.S. Nuclear Regulatory Commission (NRC) staff verifies, that the design and location of a nuclear power plant are appropriate and that the protection of health and safety of the public is maintained. In July 2000, the NRC staff issued Regulatory Guide 1.183, 'Alternative Radiological Source Terms for Evaluating Design Basis Accidents at Nuclear Power Reactors' (RG 1.183) [1]. RG 1.183 provides a method acceptable to the NRC staff for complying with the regulatory requirements contained in Title 10 of the Code of Federal Regulation (10 CFR) Section 50.67 (50.67), 'Accident source term' [2]. RG 1.183 also provides assumptions and parameters used to model postulated DBA radiological analyses for light-water reactors (LWR). Since the initial issuance of RG 1.183, the NRC staff and the nuclear power plant licensees have both gained substantial experience with the implementation of 10 CFR 50.67 and RG 1.183. Based on this experience, comments from licensees, the anticipation of licensing advanced LWRs, and new research, the NRC is developing a proposed revision to RG 1.183. This panel discussion will provide a discussion of that proposed revision, its potential impact on existing and future evaluations, and the industry perspective on the revised guidance. References: 1) USNRC, Regulatory Guide 1.183, 'Alternative Radiological Source Terms for Evaluating Design Basis Accidents at Nuclear Power Reactors,' Revision 0, U.S. Nuclear Regulatory Commission, Washington, D.C. (2000), Electronic copies are also available in ADAMS (http://www.nrc.gov/reading-rm/adams.html), under Accession No. ML003716792. 2) U.S. Code of Federal Regulations, Title 10 (Energy), Part 50 (Domestic Licensing of Production and Utilization Facilities), Section 67, (Accident source term), Office of the Federal Register, Washington, DC (1999). (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Fast Fourier transform evaluation of the Fresnel integral for gravitational-wave lensing

Gravitational waves (GWs) exhibit wave-optics effects when their wavelength is comparable to the scale of the gravitational lens. This may occur in lensing from galactic subhalos in GWs emitted by binary black-hole mergers and is gaining interest as a novel probe of dark matter. Predictions for observables in these cases ultimately rely on evaluating a Fresnel integral that quantifies the effect of lensing on the amplitude of a GW at a given frequency. However, numerical evaluation of this Fresnel integral is tricky, and several algorithms and publicly available codes that implement it have been developed. Here, we show that the dependence of this integral on the lens position can be written as a two-dimensional Fourier transform. Modern FFT techniques then enable rapid evaluation at all-sky positions simultaneously for general lenses without symmetry. Vectorization of FFT routines allows for derivatives with respect to model parameters to be obtained with only incremental additional computational cost. If the lens is axisymmetric, further speedups can be achieved with recently developed techniques for nonuniform fast Hankel transforms. To demonstrate, we make available Fresnel Integral Optimization with Nonuniform Transforms (fiona), an efficient and accurate code that is significantly faster than current methods for dense source grids, reaching 2 orders of magnitude speedups for ∼10 6 GW-emitting points. As part of FIONA , we developed code that provides vectorized nonuniform fast Hankel transforms that may have other uses (e.g., calculation of cosmological two-point correlation functions) beyond those considered here.

dark matter↗

Influence of the electron cross-field diffusion in negative ion sources with the transverse magnetic field and the plasma-electrode bias

The physical mechanisms involved in the extraction of H{sup -} ions from the negative ion source are studied with a PIC 2D3V code. The effect of a weak magnetic field transverse to the extraction direction is taken into account, along with a variable bias voltage applied on the plasma electrode (PE). In addition to previous modeling works, the electron diffusion across the magnetic field is taken into account as a simple one-dimensional random-walk process. The results show that without PE bias, the value of the diffusion coefficient has a significant influence upon the value of the extracted H{sup -} current. However, the value of this coefficient does not affect qualitatively the mechanism leading to the peak of extracted H{sup -} ion current observed for an optimum value of the PE bias.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

New Interfaces for the Plasimo Framework

The Plasimo code (http://www.plasimo.phys.tue.nl) is a multi-physics code for simulating a variety of plasma sources with various degrees of departures from equilibrium, electromagnetic field configurations, flow regimes and geometries. Plasimo's species data requirements are discussed from a developer's point of view. A detailed description is given of the implementation of cross section-averaging and the way a collisional-radiative model can be set up for arbitrary plasma gases. Some comments will be made concerning the recent work regarding the standardisation (using an XML representation) of input data that has been initiated during recent installments of the ICAMDATA conference. We will discuss possible future directions of the Plasimo project in the light of these developments and discuss the future role of such technologies like Schema, AJAX, Web Services and related web technologies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tree-based solvers for adaptive mesh refinement code $\scriptsize{FLASH}$ – IV. An X-ray radiation scheme to couple discrete and diffuse X-ray emission sources to the thermochemistry of the interstellar medium

X-ray radiation, in particular radiation between 0.1 and 10 keV, is evident from both point-like sources, such as compact objects and T-Tauri young stellar objects, and extended emission from hot, cooling gas, such as in supernova remnants. The X-ray radiation is absorbed by nearby gas, providing a source of both heating and ionization. While protoplanetary chemistry models now often include X-ray emission from the central young stellar object, simulations of star-forming regions have yet to include X-ray emission coupled to the chemo-dynamical evolution of the gas. We present an extension of the $\scriptsize{TREERAY}$ reverse ray trace algorithm implemented in the flash magnetohydrodynamic code which enables the inclusion of X-ray radiation from 0.1 keV < E γ < 100 keV, dubbed $\scriptsize{XRAYTHESPOT}$. $\scriptsize{XRAYTHESPOT}$ allows for the use of an arbitrary number of bins, minimum and maximum energies, and both temperature-independent and temperature-dependent user-defined cross-sections, along with the ability to include both point and extended diffuse emission and is coupled to the thermochemical evolution. We demonstrate the method with several multibin benchmarks testing the radiation transfer solution and coupling to the thermochemistry. Finally, we show two example star formation science cases for this module: X-ray emission from protostellar accretion irradiating an accretion disc and simulations of molecular clouds with active chemistry, radiation pressure, and protostellar radiation feedback from infrared to X-ray radiation.

79 ASTRONOMY AND ASTROPHYSICS↗

Radiation Source Mapping with Bayesian Inverse Methods

In this work, we present a method to map the spectral and spatial distributions of radioactive sources using a limited number of detectors. Locating and identifying radioactive materials is important for border monitoring, in accounting for special nuclear material in processing facilities, and in cleanup operations following a radioactive material spill. Most methods to analyze these types of problems make restrictive assumptions about the distribution of the source. In contrast, the source mapping method presented here allows an arbitrary three-dimensional distribution in space and a gamma peak distribution in energy. To apply the method, the problem is cast as an inverse problem where the system’s geometry and material composition are known and fixed, while the radiation source distribution is sought. A probabilistic Bayesian approach is used to solve the resulting inverse problem since the system of equations is ill-posed. The posterior is maximized with a Newton optimization method. The probabilistic approach also provides estimates of the confidence in the final source map prediction. A set of adjoint, discrete ordinates flux solutions, obtained in this work by the Denovo code, is required to efficiently compute detector responses from a candidate source distribution. These adjoint fluxes form the linear mapping from the state space to the response space. The test of the method’s success is simultaneously locating a set of 137 Cs and 60 Co gamma sources in a room. This test problem is solved using experimental measurements that we collected for this purpose. Because of the weak sources available for use in the experiment, some of the expected photopeaks were not distinguishable from the Compton continuum. However, by supplanting 14 flawed measurements (out of a total of 69) with synthetic responses computed by MCNP, the proof-of-principle source mapping was successful. The locations of the sources were predicted within 25 cm for two of the sources and 90 cm for the third, in a room with an ~4-x 4-m floor plan. Finally, the predicted source intensities were within a factor of ten of their true value.

07 ISOTOPE AND RADIATION SOURCES↗

Multiphysics approach to plasma neutron source modelling at the JET tokamak

A novel multiphysics methodology for the computation of realistic plasma neutron sources has been developed. The approach is based on state-of-the-art plasma transport and neutron spectrum calculations, coupled with a Monte Carlo neutron transport code, bridging the gap between plasma physics and neutronics. In the paper two JET neutronics tokamak models are used to show the application of the developed plasma neutron sources and validate them. Diagnostic data for the record JET D discharge 92436 are used as input for the TRANSP code, modelling neutron emission in two external plasma heating scenarios, namely using only neutral beam injection and a combination of the latter and ion cyclotron resonance heating. Neutron spectra, based on plasma transport results, are computed using the DRESS code. The developed PLANET code package is employed to generate plasma neutron source descriptions and couple them with the MCNP code. The effects of using the developed sources in neutron transport calculations on the response of JET neutron diagnostic systems is studied and compared to the results obtained with a generic plasma neutron source. It is shown that, although there are significant differences in the emissivity profiles, spectra shape and anisotropy between the neutron sources, the integral response of the time-resolved ex-vessel neutron detectors is largely insensitive to source changes, with major relative deviations of up to several percent. However it is calculated that, because of the broadening of neutron spectra as a consequence of external plasma heating, larger differences may occur in activation of materials which have threshold reactions located at DD neutron peak energies. The PLANET plasma neutron source computational methodology is demonstrated to be suitable for detailed neutron source effect studies on JET during DT experiments and can be applied to ITER analyses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Unit physics testing of a mix model in an eulerian fluid computation

A K-L turbulence mix model driven with a drag-buoyancy source term is tested in an Eulerian code in a series of basic unit-physics tests, as part of a mix validation milestone. The model and the closure coefficient values are derived in the work of Dimonte-Tipton [D-T] in Phys.Flu.18, 085101 (2006), and many of the test problems were reported there, where the mix model operated in Lagrange computations. The drag-buoyancy K-L mix model was implemented within the Eulerian code framework by A.J. Scannapieco. Mix model performance is evaluated in terms of mix width growth rates compared to experiments in select regimes. Results in our Eulerian code are presented for several unit-physics I-D test problems including the decay of homogeneous isotropic turbulence (HIT), Rayleigh-Taylor (RT) unstable mixing, shock amplification of initial turbulence, Richtmyer-Meshkov (RM) mixing in several single shock test cases and in comparison to two RM experiments including re-shock (Vetter-Sturtevant and Poggi, et.al.). Sensitivity to model parameters, to Atwood number, and to initial conditions are examined. Results here are in good agreement in some tests (HIT, RT) with the previous results reported for the mix model in the Lagrange calculations. The HIT turbulent decay agrees closely with analytic expectations, and the RT growth rate matches experimental values for the default values of the model coefficients proposed in [D-T]. Results for RM characterized with a power law growth rate differ from the previous mix model work but are still within the range for reasonable agreement with experiments. Sensitivity to IC values in the RM studies are examined; results are sensitive to initial values of L[t=O], which largely determines the RM mix layer growth rate, and generally differs from the IC values used in the RT studies. Result sensitivity to initial turbulence, K[t=O], is seen to be small but significant above a threshold value. Initial conditions can be adjusted so that single shock RM mix width results match experiments but we have not been able to obtain a good match for first shock and re-shock growth rates in the same experiment with a single set of parameters and Ie. Problematic issues with KH test problems are described. Resolution studies for an RM test problem show the K-L mix growth rate decreases as it converges at a supra-linear rate, and, convergence requires a fine grid (on the order of 10 microns). For comparison, a resolution study of a second mix model [Scannapieco and Cheng, Phys.Lett.A, 299(1),49, (2002)] acting on a two fluid interface problem was examined. The mix in this case was found to increase with grid resolution at low to moderate resolutions, but converged at comparably fine resolutions. In conclusion, these tests indicate that the Eulerian code K-L model, using the Dimonte Tipton default model closure coefficients, achieve reasonable results across many of the unit-physics experimental conditions. However, we were unable to obtain good matches simultaneously for shock and re-shock mix in a single experiment. Results are sensitive to initial conditions in the regimes under study, with different IC best suited to RT or RM mix. It is reasonable to expect IC sensitivity in extrapolating to high energy density regimes, or to experiments with deceleration due to arbitrary combinations of RT and RM. As a final comparison, the atomically generated mix fraction and the mix width were each compared for the K-L mix model and the Scannapieco model on an identical RM test problem. The Scannapieco mix fraction and width grow linearly. The K-L mix fraction and width grow with the same power law exponent, in contrast to expectations from analysis. In future work it is proposed to do more head-to-head comparisons between these two models and other mix model options on a full suite of physics test problems, such as interfacial deceleration due to pressure build-up during an idealized ICF implosion.

97 MATHEMATICS AND COMPUTING↗