Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “adsorbent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Uncovering the Atomistic Mechanism for Calcite Step Growth

Abstract Determining a complete atomic‐level picture of how minerals grow from aqueous solution remains a challenge as macroscopic rates can be a convolution of many reactions. For the case of calcite (CaCO 3 ) in water, computer simulations have been used to map the complex thermodynamic landscape leading to growth of the two distinct steps, acute and obtuse, on the basal surface. The carbonate ion is found to preferentially adsorb at the upper edge of acute steps while Ca 2+ only adsorbs after CO 3 2− . In contrast to the conventional picture, ion pairs prefer to bind at the upper edge of the step with only one ion, at most, coordinated to the step and lower terrace. Migration of the first carbonate ion to a growth site is found to be rate‐limiting for kink nucleation, with this process having a lower activation energy on the obtuse step.

De La Pierre, Marco↗
DOE OSTI2017

Correlation between Chiral Modifier Adsorption and Enantioselectivity in Hydrogenation Catalysis

Infrared absorption spectroscopy performed in situ at the solid–liquid interface revealed that the adsorption on platinum supported catalysts of 1-(1-naphthyl)-ethylamine, which is used as a chiral modifier in hydrogenation catalysis, occurs through the amine group, not the aromatic ring as is widely believed. In this work, comparisons were performed against a set of related modifier compounds with targeted substitutions to help identify the key moiety involved in the adsorption. It was determined that neither naphthalene-based modifiers without amine groups nor those with tertiary amine moieties are capable of adsorbing on the metal surface to any significant extent. A direct correlation was also found between the ability of the amines to adsorb on the platinum surface and their performance as chiral modifiers that impart enantioselectivity to the hydrogenation of α-keto esters such as ethyl pyruvate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Enhanced Catalysis under 2D Silica: A CO Oxidation Study

Abstract Interfacially confined microenvironments have recently gained attention in catalysis, as they can be used to modulate reaction chemistry. The emergence of a 2D nanospace at the interface between a 2D material and its support can promote varying kinetic and energetic schemes based on molecular level confinement effects imposed in this reduced volume. We report on the use of a 2D oxide cover, bilayer silica, on catalytically active Pd(111) undergoing the CO oxidation reaction. We “uncover” mechanistic insights about the structure–activity relationship with and without a 2D silica overlayer using in situ IR and X‐ray spectroscopy and mass spectrometry methods. We find that the CO oxidation reaction on Pd(111) benefits from confinement effects imposed on surface adsorbates under 2D silica. This interaction results in a lower and more dispersed coverage of CO adsorbates with restricted CO adsorption geometries, which promote oxygen adsorption and lay the foundation for the formation of a reactive surface oxide that produces higher CO 2 formation rates than Pd alone.

Eads, Calley N.↗
DOE OSTI2022

Self-Adjusting Metal–Organic Framework for Efficient Capture of Trace Xenon and Krypton

The capture of the xenon and krypton from nuclear reprocessing off-gas is essential to the treatment of radioactive waste. Although various porous materials have been employed to capture Xe and Kr, the development of high-performance adsorbents capable of trapping Xe/Kr at very low partial pressure as in the nuclear reprocessing off-gas conditions remains challenging. Herein, we report a self-adjusting metal-organic framework based on multiple weak binding interactions to capture trace Xe and Kr from the nuclear reprocessing off-gas. The self-adjusting behavior of ATC-Cu and its mechanism have been visualized by the in-situ single-crystal X-ray diffraction studies and theoretical calculations. The self-adjusting behavior endows ATC-Cu unprecedented uptake capacities of 2.65 and 0.52 mmol g -1 for Xe and Kr respectively at 0.1 bar and 298 K, as well as the record Xe capture capability from the nuclear reprocessing off-gas. Further, our work not only provides a benchmark Xe adsorbent but proposes a new route to construct smart materials for efficient separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Effect of Ambient Organic Acids on the Water Structure at ${\rm TiO}_{2}$ Interfaces

A molecular-level understanding of the effects of ambient organic compounds on the wettability of titanium dioxide ( ${\rm TiO}_{2}$ ) surfaces is relevant to many of its energy-related and environmental applications. Herein, we focus on two common atmospheric carboxylic acids, formic and acetic acid, and characterize their adsorption/ desorption at the aqueous interfaces of anatase and rutile ${\rm TiO}_{2}$ using molecular dynamics with an ab initio deep neural network potential. Our simulations show that these acids prefer to be localized in the interfacial water layers close to the ${\rm TiO}_{2}$ surface where they are stabilized by the interaction/exchange of their acid proton with a surface oxygen, rather than chemisorb at the surface Ti sites by displacing the adsorbed water. Notably, these acids make the surface of anatase hydrophobic, whereas the larger fraction of adsorbed water dissociation can offset their effect on rutile. Furthermore, these results provide a picture where carboxylic acids control the wettability of ${\rm TiO}_{2}$ largely through acid-base chemistry at the interface rather than chemisorption on the oxide surface, a finding that can help improve the design of self-cleaning surfaces and photocatalytic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Hydrolysis‐determining substrate characteristics in liquid hot water pretreated hardwood

ABSTRACT Fundamental characterization of pretreated hardwood and its interactions with cellulolytic enzymes has confirmed that a pathway exists for dramatically reducing the loading of cellulase required for hydrolysis of pretreated biomass. We demonstrate that addition of protein effecting a seven‐fold decrease in the specific activity of cellulases enables a ten‐fold reduction in enzyme loading while maintaining a high level of cellulose hydrolysis in pretreated hardwood. While use of protein and other additives that adsorb on lignin have been reported previously, the current work demonstrates the effect in a dramatic manner and brings the rationale for this change into clear focus. The key to this result is recognizing and mitigating the pretreatment conundrum where increasingly severe pretreatment conditions enhance accessibility of the enzymes not only to cellulose, but also to lignin. The lignin adsorbs enzyme protein causing loss of cellulase activity. More enzyme, added to compensate for this lost activity, results in a higher cellulase loading. The addition of a different protein, such as BSA, prevents cellulase adsorption on lignin and enables the enzyme itself to better target its glucan substrate. This effect dramatically reduces the amount of cellulase for a given level of conversion with enzyme loadings of 15 FPU and 1.3 FPU/g solids both achieving 80% conversion. The understanding of this phenomenon reinvigorates motivation for the search for other approaches that prevent cellulase adsorption on lignin in order to achieve high glucose yields at low enzyme loadings for pretreated lignocellulose. Biotechnol. Bioeng. 2015;112: 677–687. © 2014 Wiley Periodicals, Inc.

Kim, Youngmi↗
DOE OSTI2022

CO2 Hydrogenation to Hydrocarbons over Fe/BZY Catalysts

This manuscript reports a CO2 hydrogenation process in a catalytic laboratory-scale packed-bed reactor using an Fe/BZY15 (BaZr0.8Y0.15O3-d) catalyst to form hydrocarbons (e.g., CH4, C2+) at elevated pressure of 30 bar and temperatures in the range 270 = T = 375 degrees C. The effects of temperature, feed composition (i.e., CO2/H2 ratio, and residence time (i.e., Weight Hourly Space Velocity (WHSV) are studied to understand the relationship between CO2 conversion and carbon selectivity. Catalyst characterization elucidates the relationships between the catalyst structure, surface adsorbates, and reaction pathways. Thermodynamic analyses guide the experimental conditions and assist interpreting results. While the feed composition and temperature influence the product distribution, the results suggest that the higher-carbon (C2+) selectivity and yield depend strongly on residence time. The results suggest that the CO2 hydrogenation reaction pathway is similar to Fischer-Tropsch (FT) synthesis. The reaction begins with CO2 activation to form CO, followed by chain-growth reactions similar to the FT process. The CO2 activation depends on the redox activity of the catalyst. However, the carbon chain growth depends primarily on the residence time. as is the case for the FT synthesis, high residence time (on the orders of hours) is required to achieve high C2+ yield. For such high residence times, catalyst-fouling carbon deposition can be problematic. The coke-resistant BZY15 catalyst support contributes to the catalytic activity and enables a coke-free operation for more than 100 h time-on-stream.

bi-functional catalyst↗
DOE OSTI2023

The α-WC(0001) Surface as a Hydrogen Sponge: A First Principle Study of H 2 Dissociation and Formation of Low and High Coverages

Tungsten carbide (WC) displays a Pt-like behavior in catalysis, applied in hydrogenation processes. Numerous theoretical studies have modeled the behavior and use of adsorbed hydrogen without obtaining a general picture, missing basic links between H 2 dissociation and generation of high surface coverage (Θ H >0.5 ML). Here, in this study, the capability of C- and W-terminations of the α-WC(0001) surface is analyzed to dissociate several H 2 molecules to produce coverages, Θ H , ranging from low to very high values (0.13<Θ H <2.00 ML). Density functional theory and an ab initio atomistic thermodynamic were used to achieve the conditions for H 2 dissociation. The WC–C surface has higher capacity to dissociate H 2 molecules than WC–W. However, both surfaces can reach full surface coverage, Θ H =1 ML, at mild ambient conditions, T=300 K and P=1 atm, and even up to 500 K at low and high pressures. The H-adatoms on WC–W are more labile than on WC–C. The binding of adsorbates is hindered at high Θ H , implying a need to modulate Θ H according to the application. The results give the basis to understand the capabilities of WC-based catalysts in hydrogenation-related reactions, with the advantage of WC being a hydrogen reservoir at mild practical catalytic conditions.

03 NATURAL GAS↗
DOE OSTI2020

Burning magnesium in carbon dioxide for highly effective phosphate removal

Magnesium oxide was found to have high-phosphate-affinity as an effective component to enhance the phosphate removal ability of common adsorbent materials. However, the currently prepared MgO-based hybrid adsorbents by conventional methods still suffer from the limited low loading of MgO and inferior removal performances, much far away from practical application. In this study, an ingenious carbon coated MgO nanocomposite is designed by directly burning magnesium in CO 2 , a well-known textbook reaction. X-ray diffraction analysis, scanning electron microscope and aberration-corrected high-resolution transmission electron microscope demonstrate the sample is well prepared. Consequently, the high content of nanosized MgO combined with defect-rich carbon layer brings unprecedented phosphate removal capacity of 1135.0 mg/g, removal rate of 99% and benign compatibility with coexisting anions and solution pH. Furthermore, the removal mechanism is also investigated in detail by characterizing the sample before and after adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Direct Structural Identification of Gas Induced Gate‐Opening Coupled with Commensurate Adsorption in a Microporous Metal–Organic Framework

Abstract Gate‐opening is a unique and interesting phenomenon commonly observed in flexible porous frameworks, where the pore characteristics and/or crystal structures change in response to external stimuli such as adding or removing guest molecules. For gate‐opening that is induced by gas adsorption, the pore‐opening pressure often varies for different adsorbate molecules and, thus, can be applied to selectively separate a gas mixture. The detailed understanding of this phenomenon is of fundamental importance to the design of industrially applicable gas‐selective sorbents, which remains under investigated due to the lack of direct structural evidence for such systems. We report a mechanistic study of gas‐induced gate‐opening process of a microporous metal–organic framework, [Mn(ina) 2 ] (ina=isonicotinate) associated with commensurate adsorption, by a combination of several analytical techniques including single crystal X‐ray diffraction, in situ powder X‐ray diffraction coupled with differential scanning calorimetry (XRD‐DSC), and gas adsorption–desorption methods. Our study reveals that the pronounced and reversible gate opening/closing phenomena observed in [Mn(ina) 2 ] are coupled with a structural transition that involves rotation of the organic linker molecules as a result of interaction of the framework with adsorbed gas molecules including carbon dioxide and propane. The onset pressure to open the gate correlates with the extent of such interaction.

Banerjee, Debasis↗
DOE OSTI2016

Synthesis Strategies for Ultrastable Zeolite GIS Polymorphs as Sorbents for Selective Separations

Abstract Designing zeolites with tunable physicochemical properties can substantially impact their performance in commercial applications, such as adsorption, separations, catalysis, and drug delivery. Zeolite synthesis typically requires an organic structure‐directing agent to produce crystals with specific pore topology. Attempts to remove organics from syntheses to achieve commercially viable methods of preparing zeolites often lead to the formation of impurities. Herein, we present organic‐free syntheses of two polymorphs of the small‐pore zeolite P (GIS), P1 and P2. Using a combination of adsorption measurements and density functional theory calculations, we show that GIS polymorphs are selective adsorbents for H 2 O relative to other light gases (e.g., H 2 , N 2 , CO 2 ). Our findings refute prior theoretical studies postulating that GIS‐type zeolites are excellent materials for CO 2 separation/sequestration. We also show that P2 is significantly more thermally stable than P1, which broadens the operating conditions for GIS‐type zeolites in commercial applications and opens new avenues for exploring their potential use in processes such as catalysis.

Oleksiak, Matthew D.↗
DOE OSTI2020

Light Hydrocarbon Separations Using Porous Organic Framework Materials

Light hydrocarbons (C 1 –C 3 ) are used as basic energy feedstocks and as commodity organic compounds for the production of many industrially necessary chemicals. Due to the nature of the raw materials and production processes, light hydrocarbons are generated as mixtures, but the high-purity single-component products are of vital importance to the petrochemical industry. Consequently, the separation of these C 1 –C 3 products is a crucial industrial procedure that comprises a significant share of the total global energy consumption per year. As a complement to traditional separation methods (distillation, partial hydrogenation, etc.), adsorptive separations using porous solids have received widespread attention due to their lower energy costs and higher efficiency. Extensive research has been devoted to the use of porous materials such as zeolites and metal-organic frameworks (MOFs) as solid adsorbents for these key separations, owing to the high porosity, tunable pore structures, and unsaturated metal sites present in these materials. Recently, porous organic framework (POF) materials composed of organic building blocks linked by covalent bonds have also shown excellent properties in light hydrocarbon adsorption and separation, sparking interest in the use of these materials as adsorbents in separation processes. In this Minireview we summarize the recent advances in the use of POFs for light hydrocarbon separations, including the separation of mixtures of methane/ethane, methane/propane, ethylene/ethane, acetylene/ethylene, and propylene/propane, while highlighting the relationships between the structural features of these materials and their separation performances. Finally, the difficulties, challenges, and opportunities associated with leveraging POFs for light hydrocarbon separations are discussed to conclude the review.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effect of Ligand Polarity on the Internal Dipoles and Ferroelectric Distortion in BaTiO 3 Nanocubes

Here, surface adsorbates and surrounding matrix species have been demonstrated to affect the properties of nanoscale ferroelectrics and nanoscale ferroelectric composites; potentially counteracting performance losses that can occur in small particle sizes. In this work, the effects of nonpolar oleic acid (OA) and polar tetrafluoroborate (BF 4 - ) ligand capping on the surface of various sizes of BaTiO 3 nanocubes have been investigated with combined neutron diffraction and neutron pair distribution function (PDF), density functional theory (DFT), and ab initio molecular dynamics (AIMD) methods. The low real space PDF region provides an unobstructed view of rhombohedral (split short and long) Ti-O distances in BaTiO 3 nanocubes, mimicking the well-established order-disorder local structure found in bulk BaTiO 3 . Interestingly, the intermediate-range order in nanocubes is found to be orthorhombic, rather than tetragonal. It is concluded that polar ligands adsorbed at BaTiO 3 surfaces stabilize the correlation length scale of local rhombohedral distortions in ferroelectric nanoparticles relative to nonpolar ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Integrated Ammonia Capture and Exchange on Ion‐Exchanged 4A Zeolites

Ammonia poses a challenge in effluent gas streams due to its corrosive nature. However, in fusion settings tritiated ammonia can be formed, leading to both tritium loss in inventory and the generation of reactive species. Therefore, identifying pathways in which both tritium can be recovered, and the ammonia can be easily handled would be beneficial. One such way to do so would be to combine two useful techniques: ammonia sequestration and hydrogen exchange (ND 3 →NH 3 ). However, materials that can both adsorb ammonia and subsequently perform reactions on ammonia have not been well explored. Here, in this work, we present the development of ion-exchanged A-type zeolites to be utilized as a support material for platinum catalysts. In this way, the zeolite can adsorb ammonia and the platinum catalyst can facilitate hydrogen exchange allowing for bifunctional reactivity of the material to be achieved. A variety of elements were explored for their effect on A-type zeolites and resulted in an isotopic difference in the adsorption of ND 3 and NH 3 , noting the use of deuterium as a surrogate for tritium. Several platinum-impregnated zeolites were able to remove ND 3 from the gas stream, indicating that utilizing these materials in isotope recovery processes would improve accountability of these valuable hydrogen isotopes.

Koch, Christopher J. [Savannah River National Labo↗
DOE OSTI2017

Titania-Supported Single-Atom Platinum Catalyst for Water-Gas Shift Reaction

Density functional theory (DFT) and microkinetic modeling are used to examine the water-gas shift (WGS) reaction on TiO 2 (110)-supported single Pt atoms. A CO-adsorbed Pt atom supported on a TiO 2 surface exhibits a lower activity for the WGS than the Pt 2+ ion supported on a doped TiO 2 surface, although DFT predicts the CO-adsorbed Pt on an undoped TiO 2 surface to be thermodynamically more stable. Finally, trends observed in WGS activity for different active sites of TiO 2 -supported Pt catalysts can be explained in terms of CO adsorption strength and the ability to form an oxygen vacancy on the oxide support.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Leveraging Actinide Hydrolysis Chemistry for Targeted Th and U Separations using Amidoxime-Functionalized Poly(HIPE)s

Polymerized high internal phase emulsions (poly(HIPE)s) are porous polymer monoliths whose synthesis can easily be tailored to allow incorporation of functional units. In this work, nitrile containing poly(HIPE)s have been prepared with either acrylonitrile (AN) or 4-cyanostyrene (4CS) comonomers. Post-synthetic modification of these nitrile-containing poly(HIPE)s yields their corresponding amidoximated analogues, which were studied for actinide uptake. These amidoxime-functionalized, porous polymers were shown to adsorb 95 % Th4+ species from aqueous solution within 30 minutes. In contrast to other amidoxime containing polymers the uptake of UO22+ in these poly(HIPE)s is lower under similar conditions. A critical analysis of actinide separations and high-energy X-ray scattering data provides insight into the polymers’ selectivity, enabled by the uptake of multinuclear Th clusters.

actinides↗
DOE OSTI2026

An International Laboratory Comparison Study on Approximating the Enthalpy of Adsorption via the Clausius‐Clapeyron Approach

Materials-based gas capture and storage is an increasingly important area of research. Robust and accurate determination of material properties is required for judicial selection of materials for specific applications and for engineering materials–based systems at scale. One key property is the strength of the adsorbate–adsorbent interaction often quantified via the isosteric enthalpy of adsorption. The heat of adsorption can be measured directly through calorimetry; however, a more widely used approach is to apply the Clausius-Clapeyron (CC) equation to adsorption isotherms collected at different temperatures. While this approach appears to be straightforward, there exist multiple variants in the application of the methodologies employed. This raises the question on how these variations may or may not affect the determined results. Presented here is a discussion of the most common methodologies and a comparison of indirect determinations (via CC) of the isosteric enthalpy of adsorption by different laboratories on identical material. Included in that comparison are discussions on the measurement and analysis reproducibility. Importantly, details of the methodologies are shown to be critical when comparing enthalpies among laboratories, and different methodologies contribute to significant discrepancies and artifacts in the results. Recommendations are provided to promote robust determination and the reporting thereof.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗