Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Technology transfer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Cost benefit analysis of the transfer of NASA remote sensing technology to the state of Georgia

The author has identified the following significant results. First order benefits can generally be quantified, thus allowing quantitative comparisons of candidate land cover data systems. A meaningful dollar evaluation of LANDSAT can be made by a cost comparison with equally effective data systems. Users of LANDSAT data can be usefully categorized as performing three general functions: planning, permitting, and enforcing. The value of LANDSAT data to the State of Georgia is most sensitive to the parameters: discount rate, digitization cost, and photo acquisition cost. Under a constrained budget, LANDSAT could provide digitized land cover information roughly seven times more frequently than could otherwise be obtained. Thus on one hand, while the services derived from LANDSAT data in comparison to the baseline system has a positive net present value, on the other hand if the budget were constrained, more frequent information could be provided using the LANDSAT system than otherwise be obtained.

Zimmer, R. P.↗

Application transfer activity in Missouri

Experimental demonstrations and workshop instructional courses were conducted to transfer the technology of satellite remote sensing to a wide audience of resource managers. This audience included planning commissions, state agencies, federal agencies, and special councils of the Governor. Some of the experiments and workshops are outlined.

Barr, D. J.↗

Updated Z-corrections for 64-m DSS ground station delay calibrations

New Z-corrections which resulted from recent translator path delay calibrations made at DSS 14, 43, and 63 with newly developed DSN Portable Zero Delay Assemblies are presented. The test results indicate a successful transfer of technology from development to implementation and to the operations phase.

Otoshi, T. Y.↗

Multi-stage Depressed Collectors (MDC) for efficiency improvements of UHF broadcast klystrons

The consumed primary power is reduced and the efficiency of traveling wave tubes is raised through the use of depressed collectors which passively convert potential energy into electric energy. Efficiency was kept with constant within a 3 dB range while the output power varied by 10 dB. Aspects to be considered in transferring this technology to UHF klystrons are the electron energy spectrum of the klystron and the magnitude of the injection angle required.

Kosmahl, H. G.↗

Rotorcraft digital advanced avionics system (RODAAS) functional description

A functional design of a rotorcraft digital advanced avionics system (RODAAS) to transfer the technology developed for general aviation in the Demonstration Advanced Avionics System (DAAS) program to rotorcraft operation was undertaken. The objective was to develop an integrated avionics system design that enhances rotorcraft single pilot IFR operations without increasing the required pilot training/experience by exploiting advanced technology in computers, busing, displays and integrated systems design. A key element of the avionics system is the functionally distributed architecture that has the potential for high reliability with low weight, power and cost. A functional description of the RODAAS hardware and software functions is presented.

Peterson, E. M.↗

Test results of JPL LiSOCl sub 2 cells

In the development of high rate Li-SO-Cl2 cells for various applications, the goal is to achieve 300 watt-hours per kilogram at the C/2 (5 amp) rate in a D cell configuration. The JPL role is to develop the understanding of the performance, life, and safety limiting characteristics in the cell and to transfer the technology to a manufacturer to produce a safe, high quality product in a reproducible manner. The approach taken to achieve the goals is divided into four subject areas: cathode processes and characteristics; chemical reactions and safety; cell design and assembly; and performance and abuse testing. The progress made in each of these areas is discussed.

Halpert, G.↗

A unified approach to computer analysis and modeling of spacecraft environmental interactions

A new, coordinated, unified approach to the development of spacecraft plasma interaction models is proposed. The objective is to eliminate the unnecessary duplicative work in order to allow researchers to concentrate on the scientific aspects. By streamlining the developmental process, the interchange between theories and experimentalists is enhanced, and the transfer of technology to the spacecraft engineering community is faster. This approach is called the UNIfied Spacecraft Interaction Model (UNISIM). UNISIM is a coordinated system of software, hardware, and specifications. It is a tool for modeling and analyzing spacecraft interactions. It will be used to design experiments, to interpret results of experiments, and to aid in future spacecraft design. It breaks a Spacecraft Ineraction analysis into several modules. Each module will perform an analysis for some physical process, using phenomenology and algorithms which are well documented and have been subject to review. This system and its characteristics are discussed.

Katz, I.↗

The value of early flight evaluation of propulsion concepts using the NASA F-15 research airplane

The value of early flight evaluation of propulsion and propulsion control concepts was demonstrated on the NASA F-15 airplane in programs such as highly integrated digital electronic control (HIDEC), the F100 engine model derivative (EMD), and digital electronic engine control (DEEC). (In each case, the value of flight demonstration was conclusively demonstrated). This paper described these programs, and discusses the results that were not expected, based on ground test or analytical prediction. The role of flight demonstration in facilitating transfer of technology from the laboratory to operational airplanes is discussed.

Burcham, Frank W., Jr.↗

Ten past and ten future GAS/MAUS-payloads

MAUS (materials science autonomous experiments) is one out of a series of flight opportunities which the Space Program of West Germany offers to scientists from the disciplines of materials research and processing for performing materials science investigations under microgravity conditions. Up to now, ten MAUS experiments were flown which were dealing with the following scientific topics: decomposition of binary alloys with miscibility gap in the liquid state, interaction of a solidification front with dispersed particles, critical Marangoni number, investigation of the magnetic compound MnBi, shrinkage of gas bubbles in glass melts and slip casting. The ten future experiments are partly reflights with modification of the scientific objectives as well as new experiments in the fields of chemical reactions, heat transfer, glass technology and Ostwald ripening. Looking to ten flown payloads, the peculiarities of instrument technology in GAS-cans and its evolution is discussed with emphasis on structure, electronics and thermal design. A typical modern payload using 100 percent of the resource is presented.

Staniek, S.↗

The value of early flight evaluation of propulsion concepts using the NASA F-15 research airplane

The value of early flight evaluation of propulsion and propulsion control concepts was demonstrated on the NASA F-15 airplane in programs such as highly integrated digital electronic control (HIDEC), the F100 engine model derivative (EMD), and digital electronic engine control (DEEC). (In each case, the value of flight demonstration was conclusively demonstrated.) This paper describes these programs, and discusses the results that were not expected, based on ground test or analytical prediction. The role of flight demonstration in facilitating transfer of technology from the laboratory to operational airplanes is discussed.

Burcham, Frank W., Jr.↗

Atmospheric Science Field Laboratory - A feasibility study

Plans are underway to transfer the technology represented by the lightning and atmospheric science research facilities and capabilities at the Kennedy Space Center to outside users in other government agencies, private industry, and the academic community. Rocket triggered lightning is being used to demonstrate the feasibility of establishing an Atmospheric Science Field Laboratory as a permanent facility and long-term cost sharing. Results from previous programs and data from a lightning event which occurred during the STS-7 flight are presented to demonstrate the adequacy of the present lightning protection and measuring system to protect personnel, vehicle, and ground equipment, as well as to rapidly assess damage due to a lightning event.

Jafferis, William↗

Protecting sensitive systems and data in an open agency

This paper focuses on the policy and definitional issues associated with providing adequate and reasonable levels of protection for sensitive systems and data in an agency whose basic charter mandates the open sharing of information and transfer of technology into the market economy. An information model based on current Federal regulatory issuances is presented. A scheme for determining sensitivity levels, based on a categorization taxonomy,is provided.

Hunt, Douglas B.↗

Human pathway to the solar system in the 21st century

Some proposed space exploration missions are examined. Consideration is given to requirements for human expeditions to Phobos and Mars and for establishing a lunar observatory and a permanent, self-sufficient facility on Mars. Earth-to-orbit transportation, propellant management, extraterrestrial construction and operations, life support technology, space transfer systems, and automation and robotics are examined in terms of proposed missions.

O'Handley, Douglas A.↗

Orbital plane change maneuver with aerocruise

The synergistic plane change problem connected with orbital transfer employing aeroassist technology, is addressed. The mission involves transfer from high earth orbit to low earth orbit with plane change being performed within the atmosphere. The complete mission consists of a deorbit phase, atmospheric phase, and finally reorbit phase. The atmospheric maneuver is composed of an entry mode, a cruise mode, and finally an exit mode. During the cruise mode, constant altitude and velocity are maintained by means of bank angle control with constant thrust or thrust control with constant bank angle. Comparisons between these two control strategies bring out some interesting features.

Naidu, D. S.↗

Submicron area NbN/MgO/NbN tunnel junctions for SIS mixer applications

The development of submicron area mixer elements for operation in the submillimeter wave range is discussed. High-current-density NbN/MgO/NbN tunnel junctions with areas down to 0.1 sq microns have been fabricated in both planar and edge geometries. The planar junctions were fabricated from in situ deposited trilayers using electron-beam lithography to pattern submicron area mesas. Modifications of fabrication techniques used in larger-area NbN tunnel junctions are required and are discussed. The NbN/MgO/NbN edge junction process using sapphire substrates has been transferred to technologically important quartz substrates using MgO buffer layers to minimize substrate interactions. The two junction geometries are compared and contrasted in the context of submillimeter wave mixer applications.

Leduc, H. G.↗

Cooperative research and development opportunities with the National Cancer Institute

The Office of Technology Development (OTD) of the National Cancer Institute (NCI) is responsible for negotiating Cooperative Research and Development Agreements (CRADAs), whereby the knowledge resulting from NCI investigators' government-sponsored research is developed in collaboration with universities and/or industry into new products of importance for the diagnosis and treatment of cancer and acquired immunodeficiency syndrome (AIDS). The NCI has recently executed a unique 'clinical trials' CRADA and is developing a model agreement based upon it for the development and commercialization of products for the diagnosis and treatment of cancer and AIDS. NCI drug screening, preclinical testing, clinical trials, and AIDS program capabilities form the basis for this new technology development/technology transfer vehicle. NCI's extensive drug screening program and 'designer foods' program serve as potential sources of investigational new drugs (INDs) and cancer preventatives. Collaborations between NCI and pharmaceutical companies having the facilities, experience, and expertise necessary to develop INDs into approved drugs available to the public are being encouraged where the companies have proprietary rights to INDs, or where NCI has proprietary rights to INDs and invites companies to respond to a collaborator announcement published in the Federal Register. The joint efforts of the NCI and the chosen collaborator are designed to generate the data necessary to obtain pharmaceutic regulatory approval from the Food and Drug Administration (FDA) to market the drugs developed, and thereby make them available to health care providers for the diagnosis and treatment of cancer and AIDS.

Sybert, Kathleen↗

Assessment of Intelligent Processing Equipment in the National Aeronautics and Space Administration, 1991

Summarized here is an assessment of intelligent processing equipment (IPE) within NASA. An attempt is made to determine the state of IPE development and research in specific areas where NASA might contribute to the national capability. Mechanisms to transfer NASA technology to the U.S. private sector in this critical area are discussed. It was concluded that intelligent processing equipment is finding extensive use in the manufacture of space hardware, especially in the propulsion components of the shuttle. The major benefits are found in improved process consistency, which lowers cost as it reduces rework. Advanced feedback controls are under development and being implemented gradually into shuttle manufacturing. Implementation is much more extensive in new programs, such as in the advanced solid rocket motor and the Space Station Freedom.

Jones, C. S.↗