Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Structural variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Thermomechanical Modeling of Woven Materials With Particle-Based, Explicit-Fiber Simulations

Fiber-based materials are extensively used to protect spacecraft during entry. Insulative fibers, often in a fiber network or woven, provide rigidity, strength, and control of material anisotropy and density. Woven thermal protection materials, such as ADEPT (Adaptable, Deployable Entry and Placement Technology), 3D-MAT (3-Dimensional Multifunctional Ablative Thermal Protection), and 3MDCP (3D Woven Mid-Density Carbon Phenolic), enable missions with stronger and denser materials for entry profiles with high shear and heat flux. Vulnerabilities to woven thermal protection materials include manufacturing-induced material property variation, and impact from micrometeoroids. Simulating woven materials under these conditions require models that can resolve hierarchal structures, thermomechanical behavior, and failure. To address this, we simulate weave thermal conduction and mechanical deformation. We simulate the full weave with a coarse-grained yarn model is presented. The model combines a validated, high-resolution single 3MDCP yarn model and phenolic resin model. Instead of modeling every fiber, each yarn ply with order 10, instead of order 1000, fibers. The discrete element bonded particle model (DEM-BPM) of fibers captures the thermal and mechanical behavior within and between fibers. We study the proportion of heat transfer and stress via the contact network, fiber bonds, and overall weave geometry.

bonded particle↗

Solar wind mass and momentum flux variations at 0.3 AU

In the past we have used electron Thomson scattering brightness observations, obtained with the zodiacal-light photometers on board the spacecraft Helios 1 and Helios 2, to study the global density structure of the quiet corona and inner heliosphere (greater than 17 solar radii). This was done by means of a comparison of synoptic maps based on these Thomson scattering observations and synoptic maps based on other solar/heliospheric data, such as IPS velocity, K-coronameter brightness and magnetic source surface data. In this paper we continue this approach by combining the Helios Thomson scattering maps (which provide density information) with IPS solar wind velocity maps to map out variations in mass and momentum flux of the solar wind as a function of latitude and phase of the solar cycle. The method used to construct the Helios and IPS synoptic maps emphasizes the global, persistent (as opposed to transient) structures, and thus can be viewed as approximating conditions in the quiet corona and inner heliosphere.

Hick, P.↗

Dynamic analysis of an unrestrained, rotating structure through nonlinear simulation

An alternate derivation based on Hamilton's principle of equations of motion of a flexible body for use in nonlinear simulation modeling is presented. The equations include terms representing variation in the inertial properties of the body resulting from flexibility as well as terms coupling rigid body and flexible momenta that arise from satisfaction of only the linear part of the mean axis conditions. An approximate method for including the centrifugal stiffening in a way that permits a variable spin vector is given. The equations are exercised in a simulation program on an example structure initially spinning about its unstable principal axis in a gravity-free vacuum.

Zeiler, Thomas A.↗

Preliminary results on noncollocated torque control of space robot actuators

In the Space Station era, more operations will be performed robotically in space in the areas of servicing, assembly, and experiment tending among others. These robots may have various sets of requirements for accuracy, speed, and force generation, but there will be design constraints such as size, mass, and power dissipation limits. For actuation, a leading motor candidate is a dc brushless type, and there are numerous potential drive trains each with its own advantages and disadvantages. This experiment uses a harmonic drive and addresses some inherent limitations, namely its backdriveability and low frequency structural resonances. These effects are controlled and diminished by instrumenting the actuator system with a torque transducer on the output shaft. This noncollocated loop is closed to ensure that the commanded torque is accurately delivered to the manipulator link. The actuator system is modelled and its essential parameters identified. The nonlinear model for simulations will include inertias, gearing, stiction, flexibility, and the effects of output load variations. A linear model is extracted and used for designing the noncollocated torque and position feedback loops. These loops are simulated with the structural frequency encountered in the testbed system. Simulation results are given for various commands in position. The use of torque feedback is demonstrated to yield superior performance in settling time and positioning accuracy. An experimental setup being finished consists of a bench mounted motor and harmonic drive actuator system. A torque transducer and two position encoders, each with sufficient resolution and bandwidth, will provide sensory information. Parameters of the physical system are being identified and matched to analytical predictions. Initial feedback control laws will be incorporated in the bench test equipment and various experiments run to validate the designs. The status of these experiments is given.

Tilley, Scott W.↗

Modeling, Modal Properties, and Mesh Stiffness Variation Instabilities of Planetary Gears

Planetary gear noise and vibration are primary concerns in their applications in helicopters, automobiles, aircraft engines, heavy machinery and marine vehicles. Dynamic analysis is essential to the noise and vibration reduction. This work analytically investigates some critical issues and advances the understanding of planetary gear dynamics. A lumped-parameter model is built for the dynamic analysis of general planetary gears. The unique properties of the natural frequency spectra and vibration modes are rigorously characterized. These special structures apply for general planetary gears with cyclic symmetry and, in practically important case, systems with diametrically opposed planets. The special vibration properties are useful for subsequent research. Taking advantage of the derived modal properties, the natural frequency and vibration mode sensitivities to design parameters are investigated. The key parameters include mesh stiffnesses, support/bearing stiffnesses, component masses, moments of inertia, and operating speed. The eigen-sensitivities are expressed in simple, closed-form formulae associated with modal strain and kinetic energies. As disorders (e.g., mesh stiffness variation. manufacturing and assembling errors) disturb the cyclic symmetry of planetary gears, their effects on the free vibration properties are quantitatively examined. Well-defined veering rules are derived to identify dramatic changes of natural frequencies and vibration modes under parameter variations. The knowledge of free vibration properties, eigen-sensitivities, and veering rules provide important information to effectively tune the natural frequencies and optimize structural design to minimize noise and vibration. Parametric instabilities excited by mesh stiffness variations are analytically studied for multi-mesh gear systems. The discrepancies of previous studies on parametric instability of two-stage gear chains are clarified using perturbation and numerical methods. The operating conditions causing parametric instabilities are expressed in closed-form suitable for design guidance. Using the well-defined modal properties of planetary gears, the effects of mesh parameters on parametric instability are analytically identified. Simple formulae are obtained to suppress particular instabilities by adjusting contact ratios and mesh phasing.

Parker, Robert G.↗

Deep Moonquakes: Remaining Problems

We have recently reexamined more than 9000 United States previously unidentified seismic events catalogued during the Apollo landing missions and positively identified for the first time about 30 deep moonquake nests on the far side of the Moon. Although only a few of them are currently locatable, the relative arrival times among stations for the rest and presence or absence of seismic signals at particular stations suggest that either (a) the region within about $40\deg$ of the antipode is aseismic or (b) the deep interior of the Moon severely attenuates or deflects seismic waves. Aside from the obvious question of how to distinguish between such hypothetical models, this effort raised several more general questions concerning the use of deep moonquake signals to infer the structure and dynamics of the deep interior of the Moon. Among more important ones are: (1) How reliable are the seismic arrival picks from which to compute the seismic velocity variations in the Moon? (2) How do the possible lateral variations in seismic velocity affect the computed radial variation in seismic velocity at depth? (3) Can we tell more about the distribution and mechanism of deep moonquakes from the newly expanded database of identified deep moonquakes? Questions (1) and (2) are especially important because the inferred deep internal structure of the Moon depends critically on their answers. Answering these questions may demand additional data collected on future lunar missions, but some may be resolved with further examination of the existing data.

Nakamura, Y.↗

A Model for the Oxidation of C/SiC Composite Structures

A mathematical theory and an accompanying numerical scheme have been developed for predicting the oxidation behavior of C/SiC composite structures. The theory is derived from the mechanics of the flow of ideal gases through a porous solid. Within the mathematical formulation, two diffusion mechanisms are possible: (1) the relative diffusion of one species with respect to the mixture, which is concentration gradient driven and (2) the diffusion associated with the average velocity of the gas mixture, which is total gas pressure gradient driven. The result of the theoretical formulation is a set of two coupled nonlinear differential equations written in terms of the oxidant and oxide partial pressures. The differential equations must be solved simultaneously to obtain the partial vapor pressures of the oxidant and oxides as a function of space and time. The local rate of carbon oxidation is determined as a function of space and time using the map of the local oxidant partial vapor pressure along with the Arrhenius rate equation. The nonlinear differential equations are cast into matrix equations by applying the Bubnov-Galerkin weighted residual method, allowing for the solution of the differential equations numerically. The end result is a numerical scheme capable of determining the variation of the local carbon oxidation rates as a function of space and time for any arbitrary C/SiC composite structures.

Sullivan, Roy M.↗

Biaxial Braided Flared Cone Structural Analysis

Computed Tomography (CT) is a useful tool for performing structural analysis on polymer based materials due to its high precision and accuracy. CT data was taken of two flared cones made from carbon fiber and fiberglass. One of the flared cones is pictured below. The variation in braid angle throughout the part was measured using Avizo 3D modelling software while the variation in thickness throughout the part was determined using MATLAB. Samples of pictures from the process of each of these analyses are shown below. The overall goal of this analysis was to collect structural data relevant to future testing of the parts.

Computed Tomography↗

Multiseasonal variables in digital image enhancements for geological applications

Examples of enhanced multiseasonal orbital imagery illustrate the influence of multiseasonal changes in their spatial and spectral attributes, and consequently in their application to structural geology and lithological discrimination. Shadow effects associated with appropriate solar elevation and azimuth effects enhance the spatial attributes but not the spectral. In this case, variations in illumination conditions should be minimized by selecting images with high solar elevation and by the use of techniques that minimize illumination conditions. Multiseasonal imagery should be used in the identification of spectral contrast changes of rock-soil-vegetation associations which can provide evidences of related lithological units and structural features. The extraction of maximum geological information requires, at least, a fall/winter and a spring/summer scene from which spatial, spectral and multiseasonal attributes can be adequately explored.

Parada, N. D. J.↗

Structural performance of orthogonal tetrahedral truss Space-Station configurations

Two 150 kW space station configurations constructed with the orthogonal tetrahedral truss concept are described. One space station consists of a large central platform and two rotating solar wing arrays and the other consists of a long central keel with two rotating arrays. The dynamic characteristics of each configuration are obtained with and without nonstructural components present. The variation in frequencies and mass moments of inertia due to rotation of the two solar wing arrays are given for the long keel space station configuration. The structural performance of the solar wing array is assessed for cases where individual critical struts fail in the array support truss.

Dorsey, J. T.↗

Mirror modes and fast magnetoacoustic waves near the magnetic pileup boundary of comet P/Halley

Large-amplitude ultralow-frequency wave structure observed on both sides of the magnetic pileup boundary of comet P/Halley during the flyby of the Giotto spacecraft have been analyzed using suprathermal electron density and magnetic field observations. Upstream of the boundary, electron density and magnetic field magnitude variations are anticorrelated, while in the pileup region these quantities are clearly correlated. Both in front of and behind the pileup boundary the observed waves are quasi-perpendicular wave structures as a minimum variance analysis shows. A detailed comparison of our observations in the prepileup region with theoretical and numerical results shows that the mirror mode mode waves may have been generated by a mirror instability driven by the pressure anisotropy of the ring-type distributions of the heavy (water group) pickup cometary ions.

Glassmeier, Karl-Heintz↗

Ephemeral active regions and coronal bright points: A solar maximum Mission 2 guest investigator study

A dominate association of coronal bright points (as seen in He wavelength 10830) was confirmed with the approach and subsequent disappearance of opposite polarity magnetic network. While coronal bright points do occur with ephemeral regions, this association is a factor of 2 to 4 less than with sites of disappearing magnetic flux. The intensity variations seen in He I wavelength 10830 are intermittent and often rapid, varying over the 3 minute time resolution of the data; their bright point counterparts in the C IV wavelength 1548 and 20 cm wavelength show similar, though not always coincident time variations. Ejecta are associated with about 1/3 of the dark points and are evident in the C IV and H alpha data. These results support the idea that the anti-correlation of X-ray bright points with the solar cycle can be explained by the correlation of these coronal emission structures with sites of cancelling flux, indicating that, in some cases, the process of magnetic flux removal results in the release of energy. That the intensity variations are rapid and variable suggests that this process works intermittently.

Harvey, K. L.↗

Cosmic ray variations and turbulent flow systems - 0.3-1.0 AU; 1977-1980

Possible relationships among the cosmic ray intensity and magnetic fields and flows inside 1 AU are investigated using data gathered by instrumentation on the Helios 1 spacecraft during 1977-80. The data included nearly continuous simultaneous plasma and magnetic field measurements for periods of two months or more at heliocentric radii from 0.3-1 AU. Account was taken of fluctuations of the relative particle counting rates due to spacecraft motion. The passage of transient streams following solar wind shock waves was accompanied by Forbush decreases but not long term modulation. The extent and consistency of the data support a model of shell-like disturbances of diverse shapes and internal structures proceeding outward from the sun. Magnetic field fluctuation spectra (turbulence) calculated for the various types of flow observed permitted establishing power laws relationships between the variations observed and the frequency of the magnetic field. Transient flows were more turbulent than corotating flows. Turbulence was also present in mixed flows, possibly arising from shocks, and was usually confined to the spiral shaped structures of corotation.

Burlaga, L. F.↗

Velocity structure of the shallow lunar crust

Data from the thumper shots of the Apollo 14 and Apollo 16 active seismic experiments, testing whether the velocity variation in the shallow lunar crust (depths less than or equal to 10 m) can be represented by a self-compacting-power-layer or by a constant-velocity-layer model, are analyzed. Although filtering and stacking improved the S/N ratios, it was found that measuring the arrival times or amplitudes of arrivals beyond 32 m was not possible. The data quality precluded a definitive distinction between the power-law velocity variation and the layered-velocity model. Furthermore, it was found that the shallow lunar regolith is made up of fine particles, which supports the idea of a 1/6 power-velocity model. Analysis of the amplitudes of first arrivals revealed large errors in the data due to variations in the geophone sensitivities and shot strengths; a least-squares method, that uses data redundancy was employed to eliminate them.

Gangi, A. F.↗

Variation in spectral response of soybeans with respect to illumination, view, and canopy geometry

Comparisons of the spectral response for incomplete (well-defined row structure) and complete (overlapping row structure) canopies of soybeans indicated a greater dependence on Sun and view geometry for the incomplete canopies. Red and near-IR reflectance for the incomplete canopy decreased as solar zenith angle increased for a nadir view angle until the soil between the plant rows was completely shaded. Thereafter for increasing solar zenith angle, the red reflectance leveled off and the near-IR reflectance increased. A 'hot spot' effect was evident for the red and near-IR reflectance factors. The 'hot spot' effect was more pronounced for the red band based on relative reflectance value changes. The ratios of off-nadir to nadir acquired data reveal that off-nadir red band reflectance factors more closely approximated straightdown measurements for time periods away from solar noon. Normalized difference generally approximated straightdown measurements during the middle portion of the day.

Ranson, K. J.↗

Significance of foundation-soil separation in dynamic soil-structure interaction

THe dynamic response of flexible surface strip-foundations allowed to uplift is numerically obtained for externally applied forces of a transient time variation. The soil medium is represented by an isotropic, homogeneous and linear half-space. The soil is treated by a time domain boundary element method, while the flexible foundation is treated by the finite element method. It was concluded that intermediate relative stiffness leads to moderate deformations when uplift is permitted. Very flexible footings produce higher deformations in unilateral contact compared to bilateral contact, and thus should be considered in their design. Unilateral contact does not significantly increase deformations for stiff footings subjected to concentrated central loading. However, relatively large deformation differences occur when the loading is eccentric, necessitating consideration of uplift in their design.

Spyrakos, Constantine C.↗

An Improved Model of the Crustal Structure of Mars

The first reliable model of the structure of the crust and upper mantle of Mars from remote observations was produced using data from the Mars Orbiter Laser Altimeter (MOLA) and the Radio Science investigation of Mars Global Surveyor (MGS). That model assumed a uniform crustal density and solved for the global variations in crustal thickness using a gravity field derived from preliminary MGS tracking. In that study, spherical harmonic potential coefficients were derived to degree and order 80, but crustal structure was interpreted cautiously to degree 60, or 360 km wavelength, owing to the presence of noise. Tracking normal equations have since been generated to degree 75, to degree 80 (supplemented by altimetric crossovers), and recently to degree 90, using new constants for the orientation of the spin pole and the rotation rate of Mars provided by the IAU2000 rotation model. Gravity models now incorporate tracking data coverage from the Primary and Extended MGS missions and the early phases of the Mars Odyssey mission. In the present study we exploit these advances in gravity modeling to present a refined crustal inversion, which we also interpret in the context of Mars' internal structure and thermal evolution.

Zuber, M. T.↗

Optimum mirror shapes and supports for light weight mirrors subjected to self-weight

A parametric design study of light weight mirror shapes with various support conditions was performed utilizing the finite element program NASTRAN. Improvements in the mirror performance were made based on the following design criteria: (1) minimization of the optical surface wavefront variations, (2) minimization of the self-weight directly related to cost of manufacturing, and (3) optimal location of support points. A preprocessor to automatically generate a finite element model for each mirror geometry was developed in order to obtain the structural deformations systematically. Additionally, a postprocessor, which prepares an input data file for FRINGE (an optical computer code) was developed for generating the optical deflections that lead to the surface wavefront variations. Procedures and modeling techniques to achieve the optimum (the lightest and stiffest mirror shape due to self-weight) are addressed.

Cho, Myung K.↗