Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAMPLE PREPARATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Separating inverse spin Hall voltage and spin rectification voltage by inverting spin injection direction

We develop a method for universally resolving the important issue of separating the inverse spin Hall effect (ISHE) from the spin rectification effect (SRE) signal. This method is based on the consideration that the two effects depend on the spin injection direction: The ISHE is an odd function of the spin injection direction while the SRE is independent on it. Thus, the inversion of the spin injection direction changes the ISHE voltage signal, while the SRE voltage remains. It applies generally to analyzing the different voltage contributions without fitting them to special line shapes. This fast and simple method can be used in a wide frequency range and has the flexibility of sample preparation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lithium manganese oxide (LiMn{sub 2}O{sub 4}) nanoparticles synthesized by hydrothermal method as adsorbent of lithium recovery process from geothermal fluid of Lumpur Sidoarjo

Lumpur Sidoarjo is one of geothermal fluid types which has a great potential as source of lithium. Adsorption method with Lithium Manganese Oxide (LiMn{sub 2}O{sub 4}) as an adsorbent has been chosen for lithium recovery process due to low production cost and environmental friendly. LiMn{sub 2}O{sub 4} was synthesized by hydrothermal method at 200 °C for 24 hrs, 48 hrs, and 72 hrs. As prepared LiMn{sub 2}O{sub 4} powder is treated by acid treatment with 0.5 M HCl solution for 24 hrs. XRD test result reveals that all of as-prepared samples are indexed as spinel structure of LiMn{sub 2}O{sub 4} (JCPDS card no 35-0782) with no impurity peaks detected. SEM images show that LiMn{sub 2}O{sub 4} has nanoparticles morphology with particle size around 25 nm. The highest adsorption efficiency of adsorbent is obtained by sample hydrothermal for 72 hrs with 42.76%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and electrical properties of TiO{sub 2} thin films

Titanium dioxide (TiO{sub 2}) is traditionally the most widely used white pigment due to its high refractive index. Titanium dioxide (TiO{sub 2}) is traditionally the most widely used white pigment due to its high refractive index. TiO{sub 2} has received considerable attention and it has been used for optical coatings, photo-catalysis agents, gas sensors and solar cells. In this work, nano-structured TiO{sub 2} thin films were grown by pulsed laser deposition (PLD) technique on glass substrates. The prepared thin films were annealed from 400-600 °C in air for a period of 2 hours. Effect of annealing on the structural and electrical properties was studied. X-ray diffraction pattern exhibits peaks correspond to tetragonal anatase phase of TiO{sub 2} and the evaluated average crystallite size of the prepared materials are in the range of 16 to 30 nm. Electrical properties of the prepared samples are analyzed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Luminescent properties of Mn{sup 2+} doped apatite nanophosphors

Nanophosphors have been extensively investigated during the last decade due to their various high-performance application potential such as lamp industry, radiation dosimetry, X-ray imaging and colour display. The synthesis of inorganic nanophosphors using both ionizing radiation (IR) or UV light represents very promising technological field. Alkaline earth nanophosphors gathered a lot of attention in past decades because they are considered to be excellent host materials. Transition-metal oxides are well known luminescent emitters in the visible spectral region. Mn{sup 2+} doped calcium-lithium hydroxyapatite (CLHA) nanophosphors were prepared by mechanochemical synthesis. The prepared samples were characterized by photoluminescence studies. Photoluminescence spectra of Mn{sup 2+} doped CLHA nanophosphors exhibited green and strong orange emission bands at 534, 577 nm respectively under the excitation wavelength of 365 nm. The CIE chromaticity coordinates were also calculated from emission spectra for Mn{sup 2+} doped CLHA nanophosphors.

36 MATERIALS SCIENCE↗

Structural study of Ti-doped CoFe{sub 2}O{sub 4} mixed spinel ferrite

We present the results on atomic and lattice structure of the polycrystalline spinel ferrites system Co{sub 1-x} Ti{sub x}Fe{sub 2}O{sub 4} (x = 0.0, 0.25, 0.50) synthesized by following the conventional solid-state reaction route. The observed X-ray diffraction (XRD) data confirms that all the prepared samples are indexed in cubic crystal structure (space group Fd3m). Diffraction pattern showed TiO{sub 2} phase due to presence of Ti{sup +4} ions. Four Raman active phonon modes are observed for CoFe{sub 2}O{sub 4} sample existing around 295, 462, 585, 689, cm{sup −1} as Eg, T{sub 2g}(2), T{sub 2g}(3), and A{sub 1g}, respectively. With 25 % Ti ion doping, the peak T{sub 2g}(3) disappears, while to that T{sub 2g}(1) emerges. This is an indication of presence of TiO{sub 2} phase in Co{sub 0.75}Ti{sub 0.25}Fe{sub 2}O{sub 4} and Co{sub 0.5}Ti{sub 0.5}Fe{sub 2}O{sub 4} ceramics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Energy band gap and spectroscopic studies in Mn{sub 1-x}Cu{sub x}WO{sub 4} (0 ≤ x ≤ 0.125)

A study on the effect of nonmagnetic Cu{sup 2+} substitution at Mn{sup 2+} site on the structural and energy band gap of the MnWO{sub 4} is reported. Convenient solid state reaction route has been adopted for the synthesis of Mn{sub 1-x}Cu{sub x}WO{sub 4}. X-ray diffraction (XRD) pattern showed high crystalline quality of the prepared samples. Raman spectroscopic studies were carried out to understand the structural aspects of the doping. 15 Raman active modes were identified out of 18, predicted for wolframite type monoclinic structure of MnWO{sub 4}. UV-visible diffuse reflectance spectra were recorded and analyzed to get energy band gap of the studied system and are found in the range of 2.5 eV to 2.04 eV with a systematic decrease with the increase in Cu{sup 2+} concentration. Energy band gap values are verified by Density Functional Theory calculations based on projector augmented wave (PAW) method. The calculated values are in good agreement with the experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of oxidizer to fuel molar ratio on particle size and DC conductivity of CeO{sub 2} nanoparticles

Cerium oxide nanoparticles were synthesized by solution combustion method with varying the oxidizer (cerium nitrate hexa hydrate) to fuel (Glycine) molar ratio. The prepared samples were characterized by UV-visible spectrometer, X-ray diffractometer (XRD), Scanning electron microscope (SEM) and Energy dispersive X-Ray analysis (EDAX). XRD pattern reveals the formation of cubic fluorite structure of CeO{sub 2}. It was observed that finest crystallites were found at extreme fuel-deficient condition and it is good enough to produce favorable powder characteristics. The average crystallite size was found to be 14.46 nm to 21.57 nm. The temperature dependent dc conductivity was carried out using Keithley source meter between the temperature range from 300 K to 573 K. From this study it was found that the conductivity increases with increase of temperature due to semiconducting behavior of CeO{sub 2} and it decreases with particle size due to increase in the energy band gap.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of sintering temperature on the optical properties of BiFeO{sub 3} nanoparticles

BiFeO{sub 3} is a multiferroic material which exhibits excellent optical properties. BiFeO{sub 3} nanoparticles are synthesized by using sol-gel method. The prepared samples are sintered at 500°C, 600°C, 700°C, 800°C and 850°C. In this paper, the effect of sintering temperature on the optical properties in BiFeO{sub 3} nanoparticles is studied. Field emission electron microscopy (FESEM) images show that particles are nearly spherical in shape. It is found that the particles size increases from 37 nm to 51 nm with increasing the sintering temperature. FESEM images also reveal a homogenous size distribution of nanoparticles. All the functional groups are indexed in the Fourier transform infrared spectroscopy (FTIR) spectra. It is found that Fe-O stretching peaks are appeared in the wave number range 447 and 507 cm{sup −1}. The value of energy band gap are found 2.14, 2.26, 2.30, 2.36, and 2.54 eV for the samples sintered at 500°C, 600°C, 700°C, 800°C and 850°C respectively. Thus, the increase in band gap with increasing temperature has been observed. The present samples can be used as photo-catalyst, in non-volatile memories and to make spintronics devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Modifications of band gap in Si/Ge multilayers through vacuum annealing

In the present paper, important experimental findings and their impact on physical properties of Si/Ge systems are presented with the focus on structural and electronic properties investigations also covering band gap engineering. The use of synchrotron radiation based valence band photoemission spectroscopy technique has been demonstrated which provides the variation in bandgap values as a function of annealing on [Si/Ge]{sub x10} multilayers structure. For this purpose, the required VB offsets are obtained by considering the corresponding VB maximum of as prepared sample as a reference. The bandgap values thus obtained show a gradually decreasing pattern with increasing temperature, which is discussed in terms of the effect of various factors such as: (i) quantum confinement effect normally observed in confined systems (ii) change in the annealing induced intermixing leading to the formation of SiGe alloy and (iii) roughness at the surface/interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improvement of magnetic and ferroelectric properties of BiFeO{sub 3} nanoparticles on Tb and Co substitution

Tb and Co substituted bismuth ferrite nanoparticles (NPs) with chemical composition Bi{sub 1-x}Tb{sub x}Fe{sub 1-y}Co{sub y}O{sub 3} (x = 0, 0.05; y = 0, 0.05) have been synthesized by a sol-gel method and characterized by x-ray diffraction (XRD), Mossbauer spectroscopy, dc magnetization and electric polarization measurements. The aim of the present work is to improve ferroelectric properties of BiFeO{sub 3} by substitution of Tb{sup 3+} ions in Bi{sup 3+} site and magnetic properties by substitution of Co{sup 2+} in Fe{sup 3+} site. The XRD patterns of all prepared samples show formation of the desired phase along with a small amount of impurity. Room temperature Mossbauer spectroscopic studies reveal that all samples are in magnetically ordered state. Magnetic hysteresis loops of all samples indicate a significant enhancement of magnetic moment and coercivity whereas electric polarization measurements at room temperature reveal an improvement of ferroelectric properties in the co-substituted sample.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Photocatalytic behaviour of CdS/ZnS nanocomposite for dye degradation in presence of visible light

In the present work ZnS-CdS composite was prepared by hydrothermal method. The prepared samples were characterized by X-ray diffraction (XRD) to confirm formation of nano particles, Scanning electron microscopy (SEM) images exhibit nanoscale dimensions of as synthesized individual phases. UV/VIS spectra were recorded for evaluation of photophysical properties. The composite was explored as photocatalysts to study dye degradation using methylene blue in aqueous slurry under irradiation of 663 nm wavelength and congo red under irradiation of 493 nm wavelength. Under the same conditions the photocatalytic activity of the individual phases ZnS and CdS were also examined. The ZnS-CdS composite is found in enhancing the rate of photo degradation of toxic dyes as compare to ZnS and CdS individually in presence of visible light. This ZnS based metal sulphide/oxide semiconductor nanocomposites are high potential material for Photo-degradation of toxic dyes, and act as good photocatalyst in visible light.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of GaN:ZnO solid solution by solution combustion method and characterization for photocatalytic application

GaN-ZnO solid solution has emerged as a successful and reproducible photocatalyst for overall water splitting by one-step photoexcitation, with a bandgap in visible region. When the solid solution is formed, some of the Zn and O ions are replaced by Ga and N ions respectively and there is a narrowing of bandgap which is hypothesized as due to Zn3d-N2p repulsion. The traditional method of synthesis of GaN-ZnO solid solution is by nitridation of the starting oxides under constant ammonia flow. Here we report a solution combustion technique for the synthesis of the solid solution at a temperature about 500 ° C in a muffle furnace with metal nitrates as precursors and urea as the fuel. The as prepared samples showed change in color with the increased concentration of ZnO in the solution. The structural, microstructural, morphological and optical properties of the samples were realized by Powder X ray diffraction, Scanning electron microscopy, Energy dispersive X ray analysis, Transmission electron microscopy and Photoluminescence. Finally the hydrogen production efficiency of the GaN-ZnO nanopowders by water splitting was found, using methanol as a scavenger. The apparent quantum yield (AQY) of 0.048% is obtained for GaN-ZnO solid solution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and characterization of CdSe quantum dots dispersed in PVA matrix by chemical route

CdSe quantum dots using polyvinyl alcohol as a capping agent have been synthesized via a simple heat induced thermolysis technique. The structural analysis of CdSe/PVA thin film was studied by X-ray diffraction, which confirms crystalline nature of the prepared film. The surface morphology and particle size of the prepared sample was studied by Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The SEM studies of CdSe/PVA thin film shows the average size of particles in the form of clusters of several quantum dots in the range of 10-20 nm. The morphology of CdSe/PVA thin film was further examined by TEM. The TEM image shows the fringes of tiny dots with average sizes of 4-7 nm. The optical properties of CdSe/PVA thin film were studied by UV-VIS absorption spectroscopy. The CdSe/PVA quantum dots follow the role of direct transition and the optical band gap is found to be 4.03 eV. From dc conductivity measurement, the observed value of activation energy was found to be 0.71 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Accomplishment of highly porous-lithium lanthanum titanate through microwave treatment

Perovskite structured (ABO{sub 3}) lithium lanthanum titanate (LLTO) is a successful electrolyte reported by several scientists in the recent past. It is believed that intercalation and de-intercalation of Li ions inside solid electrolyte can be improved by increasing the porosity of the material. Hence in this research work, an attempt is made to increase the porosity of the LLTO electrolyte by rapid-microwave synthesis route. The microwave prepared LLTO is compared with the sol-gel synthesized LLTO. The prepared samples are analyzed with XRD, SEM, PL and cyclic Voltammetry studies. Morphological analysis proves that microwave synthesized LLTO contains much pores compared to the Sol-gel LLTO. A remarkable difference in its electrochemical property is also demonstrated and analysed with cyclic voltammetric studies and the results are presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, magnetic and electrical properties of samarium substituted multiferroic bismuth ferrite

Polycrystalline Bi{sub 0.8}Sm{sub 0.2}FeO{sub 3} was synthesized by a simple co – precipitation route. Single phase of the prepared sample was confirmed by X-ray diffraction analysis which further reveals that it crystalizes as mixed crystal structure of rhombohedral with R3c space group and orthorhombic with Pnma space group. A considerable increase in magnetization was observed at room temperature VSM analysis and temperature dependent dielectric analysis shows an anomaly at the vicinity of Neel temperature (T{sub N}). Room temperature ferroelectric study explicitly authenticates the formation of a better loop due to the reduced leakage current and the suppression of oxygen deficiencies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dielectric properties of nickel doped bismuth lithium borate glasses

Glasses with composition xBi{sub 2}O{sub 3}•(30-x)Li{sub 2}O•70B{sub 2}O{sub 3} (x = 0, 2, 5, 7 and 10 mol% with codes BLBN1-5 respectively) containing 2 mol% of NiO were prepared via melt-quenching technique and dielectric properties are discussed. The dielectric properties have been studied using impedance spectroscopy. The frequency dependent conductivity investigations for prepared compositions have been carried out using impedance spectroscopy over a frequency range of 1 KHz to 5 MHz and in the temperature range of 300 K-523 K. The complex impedance data have been analyzed by using both the conductivity and the electric modulus formalisms. Standard dielectric behavior is observed in prepared samples. The ac conductivity variations satisfy the Arrhenius relation. The study of the equivalent circuit analysis up to a temperature of 473 K shows a significant change in the equivalent circuit with change in temperature and composition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Conductivity enhancement in mechanosynthesized Bi{sub 2}O{sub 3}

Nanostructured Bi{sub 2}O{sub 3} was prepared through mechanical alloying method. Detailed microstructural information was obtained after Rietveld refinement of the prepared samples. The Transmission Electron Microscope images confirmed the crystallinity of the sample. The average crystallite size decreases whereas microstrain increases due to milling. The ionic conductivity of the milled sample was found to have increased few orders than the unmilled sample. The change in structural and electrical properties due to milling were discussed and correlated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and characterization of polycrystalline brownmillerite cobalt doped Ca{sub 2}Fe{sub 2}O{sub 5}

Brownmillerite compounds with general formula A{sub 2}BB’O{sub 5} (BB’ = Mn, Al, Fe, Co) have attracted attention in wide range of applications such as in solid oxide fuel cell, oxygen separation membrane and photocatalysis. Brownmillerite compounds have unique structure with alternate layers of BO{sub 6} octahedral layers and BO{sub 4} tetrahedral layers. Presence of dopants like Co in place of Fe increases oxygen vacancies. In the present work we have synthesized polycrystalline Ca{sub 2}Fe{sub 2}O{sub 5} and Ca{sub 2}Fe{sub 1-x}Co{sub x}O{sub 5} (x = 0.01, 0.03) by citrate combustion route. The as prepared samples were characterized by XRD using PANalytical X’Pert System, DRS (Diffuse reflectance spectroscopy) and SEM (Scanning electron microscopy).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗