Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process Efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Developing tools and process controls to manufacture energy-efficient powders for additive manufacturing feedstocks

Traditionally, metal powders have been produced through methods such as grinding, atomization, and electrolysis. In contrast to these techniques, Metal Powder Works, Inc. has pioneered a methodology based on metal cutting. This innovative approach utilizes a vibrating cutting tool to machine metal particles, in the form of chips, from a workpiece. This technique allows for control of powder particle size, morphology, and avoids any thermally induced material changes. This collaboration aims to elucidate metal cutting characteristics and assess performance on tough materials like Inconel alloys. Computational models, using FEA and SPH techniques, will be developed initially, focusing on aluminum alloy (Al 7075- T6) for studying mesh sensitivity, cutting forces, and chip morphology.

36 MATERIALS SCIENCE↗

Precision Polishing of Spheres Via In-Situ Process Monitoring and Machine-Learning-Based Optimization

In inertial confinement fusion (ICF) experiments seeking output gains of unity and beyond, the quality of the ablator capsule is paramount for minimizing hydrodynamic mix that quenches the central hot spot. Defects in the form of foreign particles or missing mass on the surface and within the wall of the capsule are primary offenders. High density carbon capsules made for ICF experiments on the National Ignition Facility (NIF) are precision polished to achieve the surface smoothness in the order of a few nm as well as to minimize isolated defects in the form of pits. Given the critical role of this process, we are developing smart manufacturing techniques with goal of elevating the efficiency of this process. Our approach is to use MEMS-based sensors to capture the fine vibrational signals generated during the polishing process and combine it with synchronized visual feedback as needed. Beyond using these sensors for process monitoring, we use specific deep learning methods to analyze the data and extract correlations with both the process parameters and the final performance of the polishing run. Here, we describe the multiple fronts that we have explored in this regard and the results we have gotten so far. This approach promises to have the potential to ultimately provide real-time feedback that can be used for ensuring the progress of the run as well as a means for faster optimization.

36 MATERIALS SCIENCE↗

Multi-fidelity is the new annealing: Gradient-free learning of posterior densities via transport maps

To tackle concentrated, multi-modal Bayesian inference problems, we propose using an annealed importance sampling procedure. To do this, we form a sequence of annealed distributions and employ transport maps to act as a surrogate of each distribution. This process is demonstrated on a few examples, favorably showing its potential for efficiently parallelizing the process of PDE evaluations and allowing for surrogates that we can sample from exactly.

van Bloemen Waanders, Bart G [Sandia National Labo↗

GaAs shallow-homojunction solar cells

The feasibility of fabricating space resistant, high efficiency, light weight, low cost GaAs shallow homojunction solar cells for space application is investigated. The material preparation of ultrathin GaAs single crystal layers, and the fabrication of efficient GaAs solar cells on bulk GaAs substrates are discussed. Considerable progress was made in both areas, and conversion efficiency about 16% AMO was obtained using anodic oxide as a single layer antireflection coating. A computer design shows that even better cells can be obtained with double layer antireflection coating. Ultrathin, high efficiency solar cells were obtained from GaAs films prepared by the CLEFT process, with conversion efficiency as high as 17% at AMI from a 10 micrometers thick GaAs film. A organometallic CVD was designed and constructed.

Fan, J. C. C.↗

Vertical transport in the atmosphere: Measurement capabilities and requirements of VHF radars, part 1.6A

Mass exchange, mixing on transport in the atmosphere involves reversible processes, i.e., any kind of organized motions such as wave and large scale flows, and nonreversible processes, i.e., molecular and turbulent diffusion. Without evaluating in detail the relative efficiency of these processes, an attempt is made to summarize those phenomena which can be qualitatively (and eventually also quantitatively) observed with VHF radars. Only mixing in the vertical direction is considered, since this appears to be the essential part of transport processes to which VHF radars can contribute better understanding. Mixing processes in the troposphere are discussed. Possible contributions of VHF radars to the study the mass exchange processes between the troposphere and stratosphere are studied. Transport in the middle atmosphere is briefly summarized, since it is in principle similar to transport in the lower atmosphere.

Rottger, J.↗

Optimization of helicopter rotor blade design for minimum vibration

The optimization approach discussed is part of an ongoing effort to develop a general automated procedure for rotor blade design. This procedure can be used to determine the necessary geometric, structural, and material properties of a rotor system to achieve desired objectives relating to vibration, stress, and aerodynamic performance. The approach used for helicopter vibration is emphasized. Based on analytical studies performed at the United Technologies Research Center (UTRC), a simplified vibration analysis was developed to be used in conjunction with a forced response analysis in the optimization process. This simplified analysis improves the efficiency of the design process significantly. Results of applying this approach to the design of an existing rotor blade model are presented.

Davis, M. W.↗

The power and efficiency of advanced software and parallel processing

Real-time simulation of flexible and articulating systems is difficult because of the computational burden of the time varying calculations. The mobile servicing system of the NASA Space Station Freedom will handle heavy payloads by local arm manipulations and by translating along the spline of the Station, it is crucial to have real-time simulation available. To enable such a simulation to be of high fidelity and to be able to be hosted on a modest computer, special care must be made in formulating the structural dynamics. Frontal solution algorithms save considerable time in performing these calculations. In addition, it is necessary to take advantage of parallel processing be compatible to take full advantage of both. An approach is offered which will result in high fidelity, real-time simulation for flexible, articulating systems such as the space Station remote servicing system.

Singh, Ramen P.↗

Parallel implementation of an algorithm for Delaunay triangulation

This work concerns the theory and practice of implementing Tanemura's algorithm for 3D Delaunay triangulation on Intel's Gamma prototype, a 128 processor MIMD computer. Tanemura's algorithm does not vectorize to any significant degree and requires indirect addressing. Efficient implementation on a conventional, vector processing, supercomputer is problematic. Efficient implementation on a parallel architecture is possible, however. In this work, speeds in excess of 8 times a single processor Cray Y-mp are realized on 128 processors of the Intel Gamma prototype.

Merriam, Marshall L.↗

Plasmonic nanoring fabrication tuned to pitch: Efficient, deterministic, and large scale realization of ultra-small gaps for next generation plasmonic devices

A double-patterning process for scalable, efficient, and deterministic nanoring array fabrication is presented. It enables gaps and features below a size of 20 nm. A writing time of 3 min/cm{sup 2} makes this process extremely appealing for scientific and industrial applications. Numerical simulations are in agreement with experimentally measured optical spectra. Therefore, a platform and a design tool for upcoming next generation plasmonic devices like hybrid plasmonic quantum systems are delivered.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A new process for NO{sub x} reduction in combustion systems for the generation of energy from waste

In the EU, emissions from energy from waste plants are largely reduced by applying the Waste Incineration Directive with its limit of 200mg/m{sup 3}{sub s} for NO{sub x} emissions. The need for further improvement is reflected by new German legislation effective as of 27 January 2009, requiring 100mg/m{sup 3}{sub s}. Other countries are expected to follow this example due to the national emission ceilings of the Gothenburg protocol and the concluding EU directive 2001/81/EC. On the other hand, an increase in energy efficiency will be encouraged by the EU Waste Framework Directive. This is why there is a need for new technologies that make it possible to reconcile both requirements: reduced emissions and increased energy efficiency. A new process combining the internal recirculation of flue gas with ammonia or urea injection in order to achieve less then 80mg/m{sup 3}{sub s} of NO{sub x} is described. Important additional features of the process are an R1 efficiency above the required 0.65 of the EU Waste Framework Directive even with standard steam parameters of 40 bar/380 deg. C as well as low ammonia slip in the flue gas at the boiler outlet of below 10mg/m{sup 3}{sub s}.

20 FOSSIL-FUELED POWER PLANTS↗

Organic Light-Emitting Diodes (OLEDs) and Optically-Detected Magnetic Resonance (ODMR) studies on organic materials

Organic semiconductors have evolved rapidly over the last decades and currently are considered as the next-generation technology for many applications, such as organic light-emitting diodes (OLEDs) in flat-panel displays (FPDs) and solid state lighting (SSL), and organic solar cells (OSCs) in clean renewable energy. This dissertation focuses mainly on OLEDs. Although the commercialization of the OLED technology in FPDs is growing and appears to be just around the corner for SSL, there are still several key issues that need to be addressed: (1) the cost of OLEDs is very high, largely due to the costly current manufacturing process; (2) the efficiency of OLEDs needs to be improved. This is vital to the success of OLEDs in the FPD and SSL industries; (3) the lifetime of OLEDs, especially blue OLEDs, is the biggest technical challenge. All these issues raise the demand for new organic materials, new device structures, and continued lower-cost fabrication methods. In an attempt to address these issues, we used solution-processing methods to fabricate highly efficient small molecule OLEDs (SMOLEDs); this approach is costeffective in comparison to the more common thermal vacuum evaporation. We also successfully made efficient indium tin oxide (ITO)-free SMOLEDs to further improve the efficiency of the OLEDs. We employed the spin-dependent optically-detected magnetic resonance (ODMR) technique to study the luminescence quenching processes in OLEDs and organic materials in order to understand the intrinsic degradation mechanisms. We also fabricated polymer LEDs (PLEDs) based on a new electron-accepting blue-emitting polymer and studied the effect of molecular weight on the efficiency of PLEDs. All these studies helped us to better understand the underlying relationship between the organic semiconductor materials and the OLEDs’ performance, and will subsequently assist in further enhancing the efficiency of OLEDs. With strongly improved device performance (in addition to other OLEDs' attributes such as mechanical flexibility and potential low cost), the OLED technology is promising to successfully compete with current technologies, such as LCDs and inorganic LEDs.

36 MATERIALS SCIENCE↗

Petascale turbulence simulation using a highly parallel fast multipole method on GPUs

This paper reports large-scale direct numerical simulations of homogeneous-isotropic fluid turbulence, achieving sustained performance of 1.08 petaflop/s on gpu hardware using single precision. The simulations use a vortex particle method to solve the Navier–Stokes equations, with a highly parallel fast multipole method (fmm) as numerical engine, and match the current record in mesh size for this application, a cube of computational points solved with a spectral method. The standard numerical approach used in this field is the pseudo-spectral method, relying on the fft algorithm as the numerical engine. The particle-based simulations presented in this paper quantitatively match the kinetic energy spectrum obtained with a pseudo-spectral method, using a trusted code. In terms of parallel performance, weak scaling results show the fmm-based vortex method achieving 74% parallel efficiency on 4096 processes (one gpu per mpi process, 3 gpus per node of the tsubame-2.0 system). The fft-based spectral method is able to achieve just 14% parallel efficiency on the same number of mpi processes (using only cpu cores), due to the all-to-all communication pattern of the fft algorithm. The calculation time for one time step was 108 s for the vortex method and 154 s for the spectral method, under these conditions. Computing with 69 billion particles, this work exceeds by an order of magnitude the largest vortex-method calculations to date.

Computer Science↗

On the need for the light elements primary process (LEPP)

Extant chemical evolution models underestimate the galactic production of Sr, Y, and Zr as well as the solar system abundances of s-only isotopes with 90 < A < 130. To solve this problem, an additional (unknown) process has been invoked, the so-called light element primary process (LEPP). In this paper we investigate possible alternative solutions. Based on Full Network Stellar evolutionary calculations, we investigate the effects on the solar system s-only distribution induced by the inclusion of some commonly ignored physical processes (e.g., rotation) or by the variation of the treatment of convective overshoot, mass loss, and the efficiency of nuclear processes. Our main findings are (1) at the epoch of the formation of the solar system, our reference model produces supersolar abundances for the whole s-only distribution, even in the range 90 < A < 130, (2) within errors, the s-only distribution relative to {sup 150}Sm is flat, (3) the s-process contribution of the less massive AGB stars (M < 1.5 M {sub ⊙}) as well as of the more massive ones (M > 4.0 M {sub ⊙}) are negligible, (4) the inclusion of rotation implies a downward shift of the whole distribution with a higher efficiency for the heavy s-only isotopes, leading to a flatter s-only distribution, (5) different prescriptions on convection or mass loss produce nearly rigid shifts of the whole distribution. In summary, a variation of the standard paradigm of AGB nucleosynthesis would allow reconciliation of model predictions with solar system s-only abundances. Nonetheless, the LEPP cannot be definitely ruled out because of the uncertainties still affecting stellar and galactic chemical evolution models.

79 ASTRONOMY AND ASTROPHYSICS↗

Sustainable conversion of biomass to rationally designed lithium-ion battery graphite

The carbon net negative conversion of bio-char, the low value byproduct of pyrolysis bio-oil production from biomass, to high value, very high purity, highly crystalline flake graphite agglomerates with rationally designed shape and size tailored for lithium-ion battery energy storage material is reported. The process is highly efficient, 0.41 g/Wh; the energy content of its co-product of the process, bio-oil, exceeds that needed to power the process. It is shown that the shape of the starting material is retained during the transformation, allowing the ultimate morphology of the graphite agglomerates to be engineered from relatively malleable biomass. In contrast to commercial graphite production, the process can be performed at small scale with low equipment costs, enabling individual research laboratories to produce Li-ion grade graphite with customizable shape, size and porosity for Si/graphite composite and other graphite involved anodes. The mechanism of the graphitization of bio-char, a “non-graphitizable” carbon, is explored, suggesting the molten metal catalyst is absorbed into the pore structure, transported through and transforming the largely immobile biochar. Finally, the transformation of biomass to rationally designed graphite morphologies with Li-ion anode performance that closely mimic commercial shaped graphite is demonstrated.

09 BIOMASS FUELS↗

Precision Polishing of Ablator Capsules via in situ Process Monitoring and Machine Learning–Based Optimization

In inertial confinement fusion (ICF) experiments seeking output gains of unity and beyond, the quality of the ablator capsule is paramount for minimizing the hydrodynamic mix that quenches the central hot spot. Defects in the form of foreign particles or missing mass on the surface and within the wall of the capsule are primary offenders. High-density carbon capsules made for ICF experiments at the National Ignition Facility are precision polished to achieve surface smoothness on the order of a few nanometers as well as to minimize isolated defects in the form of pits. Given the critical role of this process, we are developing smart manufacturing techniques with the goal of elevating the efficiency of this process. Our approach is to use MEMS (micro-electromechanical systems)–based sensors to capture the fine vibration signals generated during the polishing process and combine them with synchronized visual feedback as needed. Beyond using these sensors for process monitoring, we use specific deep learning methods to analyze the data and extract correlations with both the process parameters and the final performance of the polishing run. Here, in this work, we describe the multiple fronts we have explored in this regard and the results we have gotten so far. This approach promises to have the potential to ultimately provide real-time feedback that can be used to ensure the progress of the run as well as a means for faster optimization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗