Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Predictive modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Screening of Potential Biomass-Derived Streams as Fuel Blendstocks for Mixing Controlled Compression Ignition Combustion

Mixing controlled compression ignition or diesel engines are highly efficient and are likely to continue to be the primary means for movement of goods for many years to come. Low-carbon biofuels have the potential to significantly reduce the carbon footprint of diesel combustion and could potentially have advantageous properties for combustion such as high cetane number and reduced engine out particle emissions. In this study, we developed a list of potential biomass-derived diesel blendstocks. An online database of properties and characteristics of these bioblendstocks was populated with data. Fuel properties were determined by measurement, model prediction, or literature review. Screening criteria were developed to determine if a bioblendstock met the basic requirements for handling in the diesel distribution system and use as a blend with conventional diesel. Criteria included cetane number =40, flashpoint =52 degrees C, and boiling point or final boiling point <338 degrees C. Blendstocks needed to be soluble in diesel fuel, have a toxicity no worse than conventional diesel, and not be corrosive. Additionally, cloud point or freezing point below 0 degrees C was required. This screening produced a list of 27 potential bioblendstocks. Of these candidates, 13 were available commercially or could be synthesized by biofuels production researchers and included 11 nominally pure components and two mixtures. These 13 candidates were then subjected to further study based on how they impact fuel properties upon blending. Blend properties included cetane number, lubricity, conductivity, oxidation stability and viscosity. Results indicate that all thirteen candidates can meet the basic requirements for diesel fuel blending and are likely to reduce particle emissions from diesel combustion.

09 BIOMASS FUELS↗
NASA NTRSDate not supplied

Expedited Model Building Method for Rocket Nozzle Side Loading

Statistical analysis of test data is currently the preferred method of creating models for uncharacterized side loading in rocket nozzles. However, statistical analysis requires multiple data sets to be reliable; getting these sets requires building and testing multiple rocket motors, which is not feasible given the incredible time and cost required to do so. By using a combination of geometry, simplified finite element analysis (FEA) analogs, and algebra we can create a limited predictive model from only one test data set. Once created, the model requires only the input from one strain gauge located at each yaw and pitch attachment bracket for the actuation system. This process is not computationally intensive, therefore saving an abundance of time and budget over using full 3D FEA models to develop a similar predictive model. To develop the model, conversion factors between the strain at the gauge locations and corresponding actuator load is derived from the data. These conversion factors are used to create a “conversion ellipse” that bounds the constitutive properties of the nozzle as one lumped factor. Using a 2D cross-sectional analog of the nozzle exit plane, we create a function that allows us to determine the azimuthal location of the unexpected load based on the ratio between yaw and pitch strain readings. Combining this with the “conversion ellipse” yields a function that given the strain reading outputs an induced actuator load, regardless of the azimuthal location of the unexpected load. As previously mentioned, this predictive model is limited in its application as there is inaccuracy introduced by the use of data by only one test as well as simplifying assumptions. This approach makes a useful tool to quickly determine whether uncharacterized actuator loading events can damage actuation systems or induce loading that exceeds design limits.

Seetha A Kolli↗
DOE OSTI2021

Machine Learning Models to Predict Inhibition of the Bile Salt Export Pump

Cholestatic liver injury is frequently associated with drug inhibition of bile salt transporters, such as the bile salt export pump (BSEP). Reliable in silico models to predict BSEP inhibition directly from chemical structures would significantly reduce costs during drug discovery and could help avoid injury to patients. We report our development of classification and regression models for BSEP inhibition with substantially improved performance over previously published models. We assessed the performance effects of different methods of chemical featurization, data set partitioning, and class labeling and identified the methods producing models that generalized best to novel chemical entities.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Accounting for uncertainty in complex alluvial aquifer modeling by Bayesian multi-model approach

Alluvial aquifers by nature are complex caused by varied depositional environments. Developing a reliable groundwater model to represent an alluvial aquifer is non-trivial. Also, relying on a single best calibrated model may not be sufficient because of an inadequate choice of model parameter values. To better understand groundwater dynamics and improve model prediction reliability, this study presents a Bayesian multi-model uncertainty quantification (BMMUQ) framework to account for model parameter uncertainty in complex alluvial groundwater modeling. The methodology was applied to the agriculturally intensive Mississippi River alluvial aquifer (MRAA), Northeast Louisiana. An aquifer architecture was first constructed using 7,259 well logs in the MRAA area which covers three fluvial deposits (alluvium, braided-stream terrace, and braided-stream terrace-loess). A 12-layer MODFLOW model was then developed to address the alluvial aquifer complexity and well calibrated through a genetic algorithm. This study quantified model parameter uncertainty in hydraulic conductivity and specific storage of sand facies. Bayesian model averaging (BMA) with the Expectation Maximization (EM) algorithm was adopted to derive posterior model weights and head variances of 50 alternative conceptual groundwater flow models, and thereby obtains BMA ensemble model predictions instead of only relying on the best calibrated conceptual model. Overall, results show that an estimated around 950 million m3 of groundwater storage loss occurs in 2015 with respect to the beginning of 2004, due to high groundwater demand for irrigation in the MRAA area. Explicitly quantifying model uncertainty can produce more reliable groundwater level predictions from BMA ensemble model. The presented groundwater modeling framework improves our understanding of the MRAA and provides a valuable tool to assist agricultural water management.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2017

Sonora: A New Generation Model Atmosphere Grid for Brown Dwarfs and Young Extrasolar Giant Planets

Brown dwarf and giant planet atmospheric structure and composition has been studied both by forward models and, increasingly so, by retrieval methods. While indisputably informative, retrieval methods are of greatest value when judged in the context of grid model predictions. Meanwhile retrieval models can test the assumptions inherent in the forward modeling procedure. In order to provide a new, systematic survey of brown dwarf atmospheric structure, emergent spectra, and evolution, we have constructed a new grid of brown dwarf model atmospheres. We ultimately aim for our grid to span substantial ranges of atmospheric metallilcity, C/O ratios, cloud properties, atmospheric mixing, and other parameters. Spectra predicted by our modeling grid can be compared to both observations and retrieval results to aid in the interpretation and planning of future telescopic observations. We thus present Sonora, a new generation of substellar atmosphere models, appropriate for application to studies of L, T, and Y-type brown dwarfs and young extrasolar giant planets. The models describe the expected temperature-pressure profile and emergent spectra of an atmosphere in radiative-convective equilibrium for ranges of effective temperatures and gravities encompassing 200 less than or equal to T(sub eff) less than or equal to 2400 K and 2.5 less than or equal to log g less than or equal to 5.5. In our poster we briefly describe our modeling methodology, enumerate various updates since our group's previous models, and present our initial tranche of models for cloudless, solar metallicity, and solar carbon-to-oxygen ratio, chemical equilibrium atmospheres. These models will be available online and will be updated as opacities and cloud modeling methods continue to improve.

emergent spectra↗
DOE OSTI2022

Heuristic Computational Model for Predicting Lignin Solubility in Tailored Organic Solvents

Lignin is a random heteropolymer that has been extensively studied as a renewable source of aromatic precursors for high-value chemicals, biofuels, and bioplastics. A key challenge in lignin valorization is the structural and compositional heterogeneity of lignin feedstocks. Solvent-based approaches are commonly used to fractionate lignin to reduce this heterogeneity, but solvent selection can be challenging due to variability in lignin composition. In this work, we developed computational methods to predict good and poor organic solvents as a function of lignin composition. We analyzed 28 different linear pentamer structures, 18 from known libraries and 10 hypothetical polymers, and calculated their activity coefficients in 50 different organic solvents by using the conductor-like screening model for realistic solvents. We used these data to train a regression model that enabled the extensive investigation of the impact of solvent and monolignol compositions on predicted lignin solubility. The exhaustive exploration of solubility trends using model predictions revealed sets of solvents, identified using Kamlet–Taft parameters, that are predicted to promote lignin dissolution regardless of lignin composition. We further identified solvents expected to selectively isolate lignin fractions enriched in certain subunits. Furthermore, these results establish heuristic guidelines for solvent selection that can be used to tailor fractionation processes for lignin feedstocks of distinct composition or to design new processes that isolate fractions with higher proportions of selected subunits.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Reduced Order Model to Predict Dispersion of Flammable Refrigerant into a Space

As the HVAC&R industry mobilizes to deploy more low-GWP refrigerants, relevant standards are being continually reviewed and updated. Those include the general safety standards ISO 5149 and ASHRAE 15, and the equipment standards IEC and UL. The standards systematically set the allowable maximum amount of refrigerant that should be used in different equipment types and different applications. To do so, they rely on predictions of how a leaked refrigerant mass will disperse into a space. Dispersion characteristics, such as total flammable volume and its residence time, determine the risk associated with the presence of the flammable refrigerant. The standards have included provisions for the use of flammable refrigerants for approximately two decades. They relied on limited analytical analyses and test cases in their development. Dispersion of a refrigerant into a space is complex. Computational fluid dynamics (CFD) are the most accurate in predicting a given problem. However, CFD is computationally expensive and requires specialized expertise and resources and is not suitable for use by standards development working group as prediction tool. This paper presents the development of a reduced order model (ROM) that predicts the key dispersion characteristics relevant to the dispersion of a leaked refrigerant into a space for any combination of input variables. The inputs are the refrigerant release height, the total released refrigerant mass and its release flow rate, the refrigerant molecular weight, the ventilation flow rate, the floor area and height of the space, recirculation air flow rate, and the tightness of the space. The outputs are histograms of volume fraction of the room in prescribed concentration bins and the total mass of the refrigerant in each bin normalized by the total refrigerant charge at 13 prescribed simulation time stamps between 1 and 900 seconds. The ROM is constructed from a set of CFD simulations with carefully chosen combinations of input parameters. The selection if done using a multidimensional sparse grid which is a generalization of the classical tensor approach but offers additional flexibility and thus can be more carefully tuned towards a specific model. The tuning is done to improve the accuracy, measured in the difference between the output values of the ROM and the CFD model, while minimizing the computational cost, measured in number of CFD simulations which is orders of magnitude more expensive than the processing the training data.

Edwards, Dean↗
NASA NTRS1993

Sensor fusion display evaluation using information integration models in enhanced/synthetic vision applications

Based on existing integration models in the psychological literature, an evaluation framework is developed to assess sensor fusion displays as might be implemented in an enhanced/synthetic vision system. The proposed evaluation framework for evaluating the operator's ability to use such systems is a normative approach: The pilot's performance with the sensor fusion image is compared to models' predictions based on the pilot's performance when viewing the original component sensor images prior to fusion. This allows for the determination as to when a sensor fusion system leads to: poorer performance than one of the original sensor displays, clearly an undesirable system in which the fused sensor system causes some distortion or interference; better performance than with either single sensor system alone, but at a sub-optimal level compared to model predictions; optimal performance compared to model predictions; or, super-optimal performance, which may occur if the operator were able to use some highly diagnostic 'emergent features' in the sensor fusion display, which were unavailable in the original sensor displays.

Foyle, David C.↗
NASA NTRS1985

Sensitivity of an energy balance climate model with predicted snowfall rates

A snowfall parameterization and a polar-ice-sheet model are developed and applied to the two-level zonally averaged seasonal energy-balance climate model of Held and Suarez (1979), and sensitivity experiments involving changes in insolation are performed both with and without ice sheets. The results are presented in tables and graphs, and the hydrological-cycle response to insolation changes is found to be similar to that predicted by global-circulation models employing prescribed precipitation levels, with a somewhat higher sensitivity in the snow line. The area covered by ice sheets in the ice-sheet models is shown to be greater than that covered by permanent snow in the models without ice sheets, an effect attributed to lower surface temperatures over the ice. It is inferred that an increase in the solar constant can cause increased high-latitude precipitation but not an ice age.

Bowman, K. P.↗
DOE OSTI2025

A Novel Secondary Frequency Regulation with Optimal Priority Selection of AGC Contributions

Automatic generation control (AGC) is used to maintain acceptable frequencies during operation owing to fluctuations in load and variable resources. In conventional industry applications, the AGC signal is allocated to each generator according to the predispatched frequency regulation capacity or the order of economic efficiency. However, with the increasing integration of inverter-based resources (IBRs), the retirement of conventional synchronous generators (SGs) has posed new challenges to frequency control schemes because fewer of them are optional for AGC regulation. In this paper, we propose a novel model predictive control (MPC)-based frequency regulation model to reduce control cost and ensure stability, by considering different critical dynamic factors when optimally selecting the AGC units. The proposed control model – developed in a general form – comprehensively embeds characteristics such as generator ramping rates, reserve capacity, and operation cost. The model predictive control–based two-timescale AGC scheme enhances the capability of immunizing the power disturbance from types of resources by coordinating the control signals between faster IBRs and slower SGs. The case study’s proposed model is verified to be effective in synergistically enforcing different dynamic properties of AGC units into the frequency regulation scheme.

Jiang, Sufan [The University of North Carolina at ↗
NASA NTRS1978

Stratospheric NO and HNO3 observations in the Northern Hemisphere for three seasons

NO, HNO3, and O3 levels and air temperature were measured as a function of latitude in the 18 to 21 km region of the stratosphere, and the sum of odd nitrogen, equal to NO + NO2 + HNO3, was calculated and compared with model predictions. (NO2 values were inferred from photochemical equilibrium characteristics.) The data show that NO measurements generally exhibit good agreement with model predictions for low and midlatitudes but poor agreement at high latitudes. The experimental sum of odd nitrogen mixing ratios and model predictions agree within a factor of 2-1/2 or better at both 20 and 40 deg N, and show excellent agreement for latitudinal dependence.

Loewenstein, M.↗
NASA NTRS1999

Comparison of the SPE Model with Proton and Heavy Ion Data

Proton data from the GOES 6 and 7 satellites and heavy ion data from the IMP-8 satellite have been compared to the expected results of Nymmik's new model for solar particle event fluences. This model calculates the energy spectra of Ions for protons through nickel for solar particle events, based upon the observed proton integral fluence above 30 MeV. Based upon 27 observed proton events of solar cycle 22, and three large historical events, with integral fluences above 30 MeV of greater than 106 particles/cm2, a reasonable agreement with model predictions is seen for more than half of the events. However, several events show a marked departure from the model predictions, leading to the conclusion that there may exist more than a single class of event, or that it may be necessary to include additional parameters within the model, such as solar disk position of the source flare, or height of disturbance in the solar corona. Data for heavy Ions, (oxygen and iron), were limited to a total of six solar particle events, of which only two occurred in solar cycle 22. The agreement between data and the model predictions appeared to be quite good, however this agreement was sensitively dependent upon the value taken for the proton fluence above 30 MeV.

Cleghorn, Timothy F.↗
DOE OSTI2022

Solvation Thermodynamics of Solutes in Water and Ionic Liquids Using the Multiscale Solvation-Layer Interface Condition Continuum Model

We report molecular assembly processes are generally driven by thermodynamic properties in solutions. Atomistic modeling can be very helpful in designing and understanding complex systems, except that bulk solvent is very inefficient to treat explicitly as discrete molecules. The SLIC/CDC multiscale model combines continuum solvent electrostatics based on the solvent layer interface condition (SLIC) with statistical thermodynamic models for hydrogen bonding and nonpolar modes: cavity formation, dispersion interactions, combinatorial mixing (CDC). The SLIC/CDC model predicts Gibbs energies of solvation for a database of 500 solutes in water with average accuracy better than 1 kcal/mol both for experimental measurements and for explicit-solvent molecular dynamics simulations. The separate SLIC/CDC energy mode values agree quantitatively with those computed from explicit-solvent molecular dynamics. The SLIC/SASA multiscale model combines the SLIC continuum electrostatic model with the solvent accessible surface area (SASA) nonpolar energy mode. The SLIC/SASA model predicts Gibbs energies of solvation with better than 1.4 kcal/mol average accuracy in aqueous systems and better than 1.6 kcal/mol average accuracy in ionic liquids. Both models predict solvation entropies, and are the first implicit-solvation models capable of predicting solvation heat capacities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A Machine Learning Model for Predicting Composition of Catalytic Coprocessing Products from Molecular Beam Mass Spectra

Demand for the development of an automated and integrated refining process for biofuels has increased in recent years due to the lack of generalized process inspection tools. In bio-oil upgrading processes, all process variables are maintained based on the offline specification of intermediates and products. A lack of real-time product specifications in batch-wise monitoring can cause process failure and wasted resources. Therefore, there is a need for a fast and accurate intermediates/product specification tool that can be used for real-time specification to reduce waste and mitigate the risk of process failure. Here, to address this gap, we developed a machine learning (ML) model for predicting speciated bio-oil composition, including paraffin, iso-paraffins, olefins, naphthene, and aromatics. The model is trained using the mass spectra from upgraded products collected in the vapor phase before condensation and predicts the composition of the condensed product. Training ML models using raw mass spectra is challenging due to numerous overlapped peaks originating from different parent compounds. With this in mind, we propose a protocol that (i) transforms raw mass spectra to chemistry-inspired predefined features and (ii) trains decision tree-based models using these features. Our results show that the random forest model was robust against overfitting and had the highest accuracy compared to other models. Moreover, a stochastic ablation method determined the eight most significant features while maximizing the accuracy. Our protocol facilitates real-time compositional analysis of upgraded bio-oils and thus real-time process monitoring. Additionally, this protocol enables the rational design of efficient catalysts and the determination of optimal process conditions.

09 BIOMASS FUELS↗
DOE OSTI2021

Modelling of a Flow-Induced Oscillation, Two-Cylinder, Hydrokinetic Energy Converter Based on Experimental Data

The VIVACE Converter consists of cylindrical oscillators in tandem subjected to transverse flow-induced oscillations (FIOs) that can be improved by varying the system parameters for a given in-flow velocity: damping, stiffness, and in-flow center-to-center spacing. Compared to a single isolated cylinder, tandem cylinders can harness more hydrokinetic energy due to synergy in FIO. Experimental and numerical methods have been utilized to analyze the FIO and energy harnessing of VIVACE. A surrogate-based model of two tandem cylinders is developed to predict the power harvesting and corresponding efficiency by introducing a backpropagation neural network. It is then utilized to reduce excessive experimental or computational testing. The effects of spacing, damping, and stiffness on harvested power and efficiency of the established prediction-model are analyzed. At each selected flow velocity, optimization results of power harvesting using the prediction-model are calculated under different combinations of damping and stiffness. The main conclusions are: (1) The surrogate model, built on extensive experimental data for tandem cylinders, can predict the cylinder oscillatory response accurately. (2) Increasing the damping ratio range from 0–0.24 to 0–0.30 is beneficial for improving power efficiency, but has no significant effect on power harvesting. (3) In galloping, a spacing ratio of 1.57 has the highest optimal harnessed power and efficiency compared with other spacing values. (4) Two tandem cylinders can harness 2.01–4.67 times the optimal power of an isolated cylinder. In addition, the former can achieve 1.46–4.01 times the efficiency of the latter. (5) The surrogate model is an efficient predictive tool defining parameters of the Converter for improved energy acquisition.

backpropagation neural network↗
NASA NTRS1992

Dynamic rain fade compensation techniques for the advanced communications technology satellite

The dynamic and composite nature of propagation impairments that are incurred on earth-space communications links at frequencies in and above the 30/20 GHz Ka band necessitate the use of dynamic statistical identification and prediction processing of the fading signal in order to optimally estimate and predict the levels of each of the deleterious attenuation components. Such requirements are being met in NASA's Advanced Communications Technology Satellite (ACTS) project by the implementation of optimal processing schemes derived through the use of the ACTS Rain Attenuation Prediction Model and nonlinear Markov filtering theory. The ACTS Rain Attenuation Prediction Model discerns climatological variations on the order of 0.5 deg in latitude and longitude in the continental U.S. The time-dependent portion of the model gives precise availability predictions for the 'spot beam' links of ACTS. However, the structure of the dynamic portion of the model, which yields performance parameters such as fade duration probabilities, is isomorphic to the state-variable approach of stochastic control theory and is amenable to the design of such statistical fade processing schemes which can be made specific to the particular climatological location at which they are employed.

Manning, Robert M.↗
DOE OSTI2025

Coupled Hydrological-Thermal-Biogeochemical Modeling for Predicting Arctic Carbon Emissions (CH4PACE)

The Arctic, with nearly 1,700 billion metric tons of carbon stored in its soils, is experiencing significant warming trends that raise concerns about the potential release of greenhouse gases, particularly methane. This report investigates the conversion of carbon stored in Arctic soils and permafrost into methane and its subsequent atmospheric release over the coming decades. Recent data indicate a rise in global methane concentrations, highlighting the importance of understanding the mechanisms of methane generation under anaerobic conditions prevalent in thawing permafrost. Our study employs a multi-faceted approach that integrates fieldwork, benchtop experiments, and numerical simulations to explore the subsurface hydrological-thermal-biogeochemical systems influencing methane emissions. We focus on the relationship between microbial activity in decomposing organic matter under oxygen-limited conditions and the transport of methane out of these saturated wetland soils. Key hydrological parameters, including permeability, porosity, and thermal conductivity, were measured on soil samples from Fairbanks, Alaska, and used to parameterize PFLOTRAN, a coupled hydrological-thermal-reactive transport simulator. Our model enables prediction of the evolution of the active layer and its impact on methane production and release. Our findings underscore the critical need for a mechanistic understanding of methane dynamics in permafrost environments to improve predictions of methane emissions in Earth systems models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Imitating the “breeder's eye”: Predicting grain yield from measurements of non‐yield traits

Abstract Plant breeding relies on information gathered from field trials to select promising new crop varieties for release to farmers and to develop genomic prediction models that can enhance the efficiency of genetic improvement in future breeding cycles. However, generating the genetic marker data required to apply genomic prediction at the early stages of a breeding program remains costly for many public‐sector breeding programs as well as for many plant breeders operating in developing countries. As the pace of climate change intensifies, the time lag of developing and deploying new crop varieties requires plant breeders to make selection decisions without knowing the future environments those crop varieties will encounter in farmers’ fields. Therefore, both lower cost and higher accuracy methods for prediction of crop performance are essential for creating and maintaining resilient agricultural systems in the latter half of the 21 st century. To address this challenge, we conducted linked yield trials of 752 public maize ( Zea mays ) genotypes in two distinct environments. We developed and trained a phenotypic prediction model to predict yield from manually scored plant traits. The phenotypic prediction approach we employed outperformed genomic prediction in predicting yields in a second environment, with 8.7%–63% higher R 2 and 4%–13% less root mean square error than the genomic prediction. The phenotypic prediction has the potential to be applied to a wider range of breeding programs, including those that lack the resources to genotype large populations, such as programs in the developing world, breeding programs for specialty crops, and public sector programs.

60 APPLIED LIFE SCIENCES↗