DOE OSTI2018
In situ hard-particle-reinforced Fe-based composite coatings were prepared on Q235 steel substrates by direct laser deposition using Fe-based alloy powders containing 2 wt.% B, 3 wt.% Si and 1-3 wt.% nano-Y{sub 2}O{sub 3}. The microstructures, phase compositions, hardnesses and wear resistances of the deposited coatings with different nano-Y{sub 2}O{sub 3} contents were studied using metallographic microscopy, scanning electron microscopy, x-ray diffraction, transmission electron microscopy, microhardness tests and pin-on-disk abrasion tests (MMW-1A), respectively. The results showed that the appropriate addition of Y{sub 2}O{sub 3} played a role in grain refinement and in decreasing the number of brittle phases and impurity elements in the grain boundaries. Consequently, the number of cracks in the laser-deposited coating also decreased. The Fe-based composite coatings were mainly composed of α-Fe, γ-Fe and in situ-produced reinforced particle phases, such as Cr{sub 23}C{sub 6}, Cr{sub 7}C{sub 3}, (Cr, Fe){sub 7}C{sub 3}, Fe{sub 2}B, and CrFeB. When the content of nano-Y{sub 2}O{sub 3} was 2 wt.%, a Fe-based composite coating with a thickness of 4 mm that was free of cracks was obtained, and its surface hardness reached 650HV. Moreover, the wear resistance of the coating with 2 wt.% nano-Y{sub 2}O{sub 3} was the best among the samples studied. The presence of nano-Y{sub 2}O{sub 3} increased the solubility of Cr and Si in the solid solution, which eliminated the residual austenite region, and as a result, the phase transformation from γ-Fe to α-Fe was restrained and the transformation stress was also limited, thereby decreasing the probability of cracks in the coatings.
77 NANOSCIENCE AND NANOTECHNOLOGY↗