Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Performance Gap”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Bonding Hierarchy Gives Rise to High Thermoelectric Performance in Layered Zintl Compound BaAu 2 P 4

The search for new thermoelectric materials has gained rapid progress in recent years as thermoelectric technology offers the potential for environmentally friendly and sustainable energy conversion methods from waste heat to electricity. In this work, we use first-principles calculations based on density functional theory to predict high thermoelectric performance in BaAu 2 P 4 , a layered Zintl compound with a small band gap. BaAu 2 P 4 exhibits crystallographic heterogeneity in which rigid [Au 2 P 4 ] 2– units are separated by layers of Ba 2+ cations, which are bonded relatively weakly to the lattice through electrostatic interactions. The phosphorus atoms are covalently bonded to each other and form infinite chains within the crystal. While the phosphorus chains facilitate large electrical conductivity, the presence of multiple bands near the Fermi level gives rise to an enhanced Seebeck coefficient. On the other hand, the loosely bound Ba along with Au strongly scatter the heat carrying acoustic phonons, significantly reducing the lattice thermal conduction along the stacking direction. As a consequence of this bonding hierarchy (i.e., coexisting rigid and fluctuating sublattices), BaAu 2 P 4 exhibits a large power factor and low lattice thermal conductivity, which results in a high thermoelectric figure of merit ($zT$). Thus, our findings should encourage the exploration of new thermoelectric materials in the family of layered compounds with small band gaps and crystallographic heterogeneity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ion-Pair Dissociation on α-MoO 3 Surfaces: Focus on the Electrolyte–Cathode Compatibility Issue in Mg Batteries

Nanosizing has been explored as one option to enhance typically sluggish Mg ion mobility in cathode materials. Here, we explore the effects of the surfaces of α-MoO3 in facilitating or hindering Mg ion desolvation at the electrolyte–cathode interface. It is well-known in the Mg battery community that Mg–anion contact ion pairs may form in the electrolyte and thus the insertion of Mg into the cathode must involve desolvation and dissociation, where Mg is detached from the counterion at the cathode surface. Here we compare two representative Mg–anion pairs, i.e., (Mg–Cl)+ and (Mg–TFSI)+ (TFSI–, bis(trifluoromethanesulfonyl)imide), differentiated according to the size and polarizability of the anion, and examine their dissociations on different α-MoO3 surfaces. We find that (Mg–Cl)+ requires a higher dissociation energy than (Mg–TFSI)+, which implies that the Mg–TFSI-type electrolyte is more suitable to be integrated with the MoO3 cathode when creating an electrochemical cell. The dissociation of (Mg–TFSI)+ occurs, however, not on the lowest energy (010) surface where the van der Waals (vdW) gap opens, but on the hydroxyl-terminated (001) surface. Therefore, to optimize the performance of α-MoO3 toward (Mg–TFSI)+ dissociation, preferential growth of the hydroxyl-terminated (001) surface is required.

Wan, Liwen F.↗

High Figure of Merit in Gallium-Doped Nanostructured n-Type PbTe-xGeTe with Midgap States

PbTe-based thermoelectric materials are some of the most promising for converting heat into electricity, but their ntype versions still lag in performance the p-type ones. Here, we introduce midgap states and nanoscale precipitates using Gadoping and GeTe-alloying to considerably improve the performance of n-type PbTe. The GeTe alloying significantly enlarges the energy band gap of PbTe and subsequent Ga doping introduces special midgap states that lead to an increased density of states (DOS) effective mass and enhanced Seebeck coefficients. Moreover, the nucleated Ga 2 Te 3 nanoscale precipitates and off-center discordant Ge atoms in the PbTe matrix cause intense phonon scattering, strongly reducing the thermal conductivity (~0.65 W m -1 K -1 at 623 K). As a result, a high room-temperature thermoelectric figure of merit ZT ~ 0.59 and a peak ZT max of ~1.47 at 673 K were obtained for the Pb 0.98 Ga 0.02 Te-5%GeTe. The ZT avg value that is most relevant for devices is ~1.27 from 400 to 773 K, the highest recorded value for n-type PbTe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Laterally configured resistive switching device based on transition-metal nano-gap electrode on Gd oxide

We have developed a fabrication process for a laterally configured resistive switching device based on a Gd oxide. A nano-gap electrode connected by a Gd oxide with the ideal interfaces has been created by adapting the electro-migration method in a metal/GdO{sub x} bilayer system. Bipolar set and reset operations have been clearly observed in the Pt/GdO{sub x} system similarly in the vertical device based on GdO{sub x}. Interestingly, we were able to observe a clear bipolar switching also in a ferromagnetic CoFeB nano-gap electrode with better stability compared to the Pt/GdO{sub x} device. The superior performance of the CoFeB/GdO{sub x} device implies the importance of the spin on the resistive switching.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low-frequency Raman signature of Ag-intercalated few-layer MoS 2

Density functional theory based calculations and experimental analysis on a limited number of real samples are performed to study how the presence of silver intercalated in the van der Waals gap of few-layer MoS 2 affects the low-frequency Raman active modes of this material. Silver is found to predominantly affect the breathing-like and shear-like vibrational modes of MoS 2 . These modes correspond to quasi-rigid movements of each individual layer with a restoring force (and, in turn, frequency) that is determined by modulations in the weak interlayer interactions. Noticeable red-shifts with increasing Ag concentration are found for all low-frequency modes. This finding indicates the potential for low-frequency vibrations as useful gauges for practical determination of silver concentration using low-frequency Raman spectroscopy. Finally, this work also describes a semi-classical linear chain model that allows to extrapolate results to a large number of layers. Further, first-principles calculations show how Raman spectroscopy can be used to characterize the quality of the two-dimensional interface between MoS 2 and a silver substrate.

36 MATERIALS SCIENCE↗

Lattice vacancy migration barriers in Fe-Ni alloys, and an indication as to why Ni atoms diffuse slowly: A first-principles study

Lattice vacancy migration barriers in ferromagnetic Fe 𝑥 ⁢Ni 1−𝑥 alloys (0.4 ≤ 𝑥 ≤ 0.6) are accurately quantified within the framework of ab initio electronic structure calculations using the nudged elastic band (NEB) method. Both the atomically disordered (A1) fcc phase, as well as the atomically ordered, tetragonal L⁢1 0 phase—which is under consideration as a material for a rare-earth-free gap magnet for advanced engineering applications—are investigated. Across an ensemble of NEB calculations performed on supercell configurations spanning a range of compositions and containing disordered, partially ordered, and fully ordered structures, we find that Ni-vacancy interchanges encounter significantly higher energetic barriers than do Fe-vacancy interchanges. We contend that this aspect is a key factor in determining the differences in mobility between Fe and Ni atoms in this ferromagnetic alloy. Moreover, we are able to interpret these findings in terms of the ferromagnetic alloy's underlying spin-polarized electronic structure. Specifically, we report a coupling between the size of local lattice distortions and the magnitude of the local electronic spin polarization around vacancies. This causes Fe atoms to relax into lattice vacancies, while Ni atoms remain rigidly fixed to their original lattice positions. These results give atomic-scale insight into the longstanding experimental observation that Ni exhibits remarkably slow atomic diffusion in Fe-Ni alloys.

density functional theory↗

Improved coherence in optically defined niobium trilayer-junction qubits

Niobium offers the benefit of increased operating temperatures and frequencies for Josephson junctions, which are the core component of superconducting devices. However existing niobium processes are limited by more complicated fabrication methods and higher losses than now-standard aluminum junctions. Combining recent trilayer fabrication advancements, methods to remove lossy dielectrics and modern superconducting qubit design, we revisit niobium trilayer junctions and fabricate all-niobium transmons using only optical lithography. We characterize devices in the microwave domain, measuring coherence times up to $62~\mu$s and an average qubit quality factor above $10^5$: much closer to state-of-the-art aluminum-junction devices. We find the higher superconducting gap energy also results in reduced quasiparticle sensitivity above $0.16~$K, where aluminum junction performance deteriorates. Our junction process is readily applied to standard optical-based foundry processes, opening new avenues for direct integration and scalability, and paves the way for higher-temperature and higher-frequency quantum devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photon energy and polarization-dependent electronic structure of Cr-doped Bi 2 Se 3

In this article, we report a comparative study of the electronic structure of Cr-doped and pristine Bi 2 Se 3 . Circular dichroism and photon-energy-dependent angle-resolved photoemission experiments were performed. Even though the surface states seen on the Cr-doped samples are gapped, they exhibit strong circular dichroism, for which we provide its origin in accordance with the nontrivial band structure of the bulk. We note the surface electronic structure measurements with linear and circular polarized light show signatures that the orbital composition of the surface states is changed with Cr doping. Our observations not only provide further spectroscopic information about topological materials, but also promotes an alternative experimental tool to control their spin-orbital texture.

36 MATERIALS SCIENCE↗

Comments on Control of Wave Energy Converters

The main objective of this letter is to consolidate the knowledge about the dynamics and control of oscillating-body wave energy converters (WECs). A number of studies have shown that control systems strongly affect power absorption; however, there remains a need for a concise and integrated explanation of the theoretical and practical implications that control can have on both performance and the broader WEC design process. This short letter attempts to fill this gap by presenting a discussion on the key practical aspects concerning the dynamics and control of oscillating-body WEC. In particular, the focus is on the choice of control models and a simple causal control scheme suitable for real-time implementation. To conclude, consideration is given to the effect of the power takeoff (PTO) on the maximization of electrical power, thus leading to the derivation of useful conditions for the control co-design of the PTO system.

42 ENGINEERING↗

SU-F-P-39: End-To-End Validation of a 6 MV High Dose Rate Photon Beam, Configured for Eclipse AAA Algorithm Using Golden Beam Data, for SBRT Treatments Using RapidArc

Purpose: To use end-to-end testing to validate a 6 MV high dose rate photon beam, configured for Eclipse AAA algorithm using Golden Beam Data (GBD), for SBRT treatments using RapidArc. Methods: Beam data was configured for Varian Eclipse AAA algorithm using the GBD provided by the vendor. Transverse and diagonals dose profiles, PDDs and output factors down to a field size of 2×2 cm2 were measured on a Varian Trilogy Linac and compared with GBD library using 2% 2mm 1D gamma analysis. The MLC transmission factor and dosimetric leaf gap were determined to characterize the MLC in Eclipse. Mechanical and dosimetric tests were performed combining different gantry rotation speeds, dose rates and leaf speeds to evaluate the delivery system performance according to VMAT accuracy requirements. An end-to-end test was implemented planning several SBRT RapidArc treatments on a CIRS 002LFC IMRT Thorax Phantom. The CT scanner calibration curve was acquired and loaded in Eclipse. PTW 31013 ionization chamber was used with Keithley 35617EBS electrometer for absolute point dose measurements in water and lung equivalent inserts. TPS calculated planar dose distributions were compared to those measured using EPID and MapCheck, as an independent verification method. Results were evaluated with gamma criteria of 2% dose difference and 2mm DTA for 95% of points. Results: GBD set vs. measured data passed 2% 2mm 1D gamma analysis even for small fields. Machine performance tests show results are independent of machine delivery configuration, as expected. Absolute point dosimetry comparison resulted within 4% for the worst case scenario in lung. Over 97% of the points evaluated in dose distributions passed gamma index analysis. Conclusion: Eclipse AAA algorithm configuration of the 6 MV high dose rate photon beam using GBD proved efficient. End-to-end test dose calculation results indicate it can be used clinically for SBRT using RapidArc.

60 APPLIED LIFE SCIENCES↗

Predictive characterization of aging and degradation of reactor materials in extreme environments. Final report, December 20, 2013 - September 20, 2017

Understanding of reactor material behavior in extreme environments is vital not only to the development of new materials for the next generation nuclear reactors, but also to the extension of the operating lifetimes of the current fleet of nuclear reactors. To this end, this project conducted a suite of unique experimental techniques, augmented by a mesoscale computational framework, to understand and predict the long-term effects of irradiation, temperature, and stress on material microstructures and their macroscopic behavior. The experimental techniques and computational tools were demonstrated on two distinctive types of reactor materials, namely, Zr alloys and high-Cr martensitic steels. These materials are chosen as the test beds because they are the archetypes of high-performance reactor materials (cladding, wrappers, ducts, pressure vessel, piping, etc.). To fill the knowledge gaps, and to meet the technology needs, a suite of innovative in situ transmission electron microscopy (TEM) characterization techniques (heating, heavy ion irradiation, He implantation, quantitative small-scale mechanical testing, and various combinations thereof) were developed and used to elucidate and map the fundamental mechanisms of microstructure evolution in both Zr and Cr alloys for a wide range environmental boundary conditions in the thermal-mechanical-irradiation input space. Knowledge gained from the experimental observations of the active mechanisms and the role of local microstructural defects on the response of the material has been incorporated into a mathematically rigorous and comprehensive three-dimensional mesoscale framework capable of accounting for the compositional variation, microstructural evolution and localized deformation (radiation damage) to predict aging and degradation of key reactor materials operating in extreme environments. Predictions from this mesoscale framework were compared with the in situ TEM observations to validate the model.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Roadmap to Advance Heliostat Technologies for High Temperature Solar-Thermal Systems

Since its establishment, the Heliostat Consortium (HelioCon) has made substantial progress toward closing many of the gaps in concentrating solar power (CSP) research. Numerous techno-economic studies have been performed, investigating topics ranging from the trade-off between size and temperature for industrial process heat applications to optimization of the heliostat design itself for various applications. Significant improvements have been made in optical metrology techniques, with first steps toward in situ measurement of heliostat fields. Several standards have been, and continue to be, developed with the coordination of an international group of CSP industry participants. Training programs have been developed, with universities including CSP in their engineering curricula, and many public webinars have been held to provide broad access to the latest CSP research. Improved CSP components such as mirror facets and wireless communication systems have been developed, and the solar tower at Sandia National Laboratories has been upgraded with a testbed for closed-loop controls research and development. Field deployment challenges involving heliostat foundations and sensitive wildlife habitats have been explored, with progress made toward methods for streamlining project development and permitting. Additional knowledge has been added to the body of work on wind behavior of heliostats and arrays of heliostats, with progress made toward a holistic understanding of wind design methods. Finally, techniques have been developed and demonstrated for assessing soiling conditions at a proposed project site, with predictive models for the soiling rate showing good results. Taking these results together, HelioCon has contributed greatly to the global CSP research and development effort over the past several years.

14 SOLAR ENERGY↗

Watching the Watchers with Verified Formal-Assurance Tools (Abbreviated Final Report)

The “Watching the Watchers” project studied the problem of establishing assurance cases for tools that are used to assure other things. Specifically, we were interested in understanding the tools and techniques one could apply to software to build an assurance case to evaluate their applicability, difficulty, level of assurance provided, and scalability. To do so we chose a set of use cases of relevance to LLNL and our various DOE and non-DOE partners and developed demonstrators to perform this evaluation. Our key focal point was around additive manufacturing problems and assurance gaps that we identified in the additive manufacturing workflow from start to completion. We also explored other areas related to AI, data analysis, and concurrent programming. Follow-on research is planned to take our prototypes from this project and adapt and mature them to fit LLNL mission applications.

97 MATHEMATICS AND COMPUTING↗

Advanced Mooring Lines for Marine Energy Workshop – Summary Report

This report summarizes the outcomes of the virtual Advanced Mooring Lines for Marine Energy Workshop. The workshop convened experts from industry, academia, and national laboratories to identify key challenges associated with the deployment of synthetic mooring lines for marine energy applications. Discussions focused on four technical areas—materials, failure and degradation, testing, and modeling. Despite the significant promise of leveraging synthetic mooring systems for marine energy applications, discussion highlighted broader research and development needed to address the lack of validated long-term performance data, insufficient structural health monitoring frameworks, limited large-scale testing capabilities, and gaps in predictive modeling. Overall, the workshop emphasized the importance of coordinated research and development efforts to advance reliable, durable, and cost-effective synthetic mooring solutions for marine energy applications.

16 TIDAL AND WAVE POWER↗

A surface density perturbation in the TW hydrae disk at 95 au traced by molecular emission

We present ALMA Cycle 2 observations at 0.″5 resolution of TW Hya of CS J=5−4 emission. The radial profile of the integrated line emission displays oscillatory features outward of 1.″5 (≈90 au). A dip-like feature at 1.″6 is coincident in location, depth, and width with features observed in dust scattered light at near-infrared wavelengths. Using a thermochemical model indicative of TW Hya, gas-grain chemical modeling, and non-LTE radiative transfer, we demonstrate that such a feature can be reproduced with a surface density depression, consistent with the modeling performed for scattered-light observations of TW Hya. We further demonstrate that a gap in the dust distribution and dust opacity only cannot reproduce the observed CS feature. The outer enhancement at 3.″1 is identified as a region of intensified desorption due to enhanced penetration of the interstellar far-UV radiation at the exponential edge of the disk surface density, which intensifies the photochemical processing of gas and ices.

79 ASTRONOMY AND ASTROPHYSICS↗

Technology for the product and process data base

The computerized product and process data base is increasingly recognized to be the cornerstone component of an overall system aimed at the integrated automation of the industrial processes of a given company or enterprise. The technology needed to support these more effective computer integrated design and manufacturing methods, especially the concept of 3-D computer-sensible product definitions rather than engineering drawings, is not fully available and rationalized. Progress is being made, however, in bridging this technology gap with concentration on the modeling of sophisticated information and data structures, high-performance interactive user interfaces and comprehensive tools for managing the resulting computerized product definition and process data base.

Barnes, R. D.↗

Report on the Workshop on Intercomparison of Solar UV Irradiance Measurements and Related Instrument Calibration

The knowledge of the absolute value of the solar ultraviolet irradiance did not improve very much during the rising phase of the solar cycle 21. The variations associated with the solar rotation period were observed by means of three satellites, namely, the Atmospheric Explorer E (AE-E), Nimbus 7 and the Solar Mesospheric Explorer (SME). Long-term variations related to the solar activity cycle are not well known. Values were deduced during the solar cycle 21 from the AE-E satellite and the rocket program performed by the Laboratory for Atmospheric and Space Physics leading to variations of about a factor of 2 around 150 nm but definitely less than 20 percent beyond 175 nm. Such low level of variation is still masked by the current uncertainties and reproducibility of the observations performed since 1976. The uncertainties of recent observations are reported with their discrepancies. The gaps between the current accuracy goals and the achievements are still very important. The challenge for the next three years is to improve both the accuracy and the precision of future observations at the level of the available irradiance standards and to measure quantitatively long-term variations of the order of a few percent. The main causes of these gaps are identified.

Simon, P. C.↗