Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle Size Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Data analysis and interpretation of lunar dust exosphere

The lunar horizon glow observed by Apollo astronauts and recorded during the Surveyor missions is believed to result from the scattering of sunlight off lunar fines suspended in a dust layer above the lunar surface. For scale heights of tens of kilometers, theory and astronaut's observations suggest that the size of the dust particles will be smaller than 0.1 microns in radius and will act as Rayleigh scatters. This means that the dust scattered light will be 100 percent polarized at a 90 degree scattering angle and will depend on wavelength to the inverse fourth power ('bluing'). Believing these signatures to be observable from ground based telescopes, observational data in the form of CCD images has been collected from McDonald Observatory's 36 in. telescope, and the reduction and analysis of this data is the focus of the present report.

Andrews, George A., Jr.↗

Reaction of Water-Saturated Supercritical CO2 with Forsterite: Evidence for Magnesite Formation at Low Temperatures

The nature of the reaction products that form on the surfaces of nanometer-sized forsterite particles during reaction with H2O saturated supercritical CO2 (scCO2) at 35 C and 50 C were examined under in situ conditions and ex situ following reaction. The in situ analysis was conducted by X-ray diffraction (XRD). Ex situ analysis consisted of scanning electron microscopy (SEM) examination of the surface phases and chemical characterization of precipitates using a combination of confocal Raman spectroscopy, 13C and 29Si NMR spectroscopy, and energy-dispersive X-ray Spectroscopy (EDS). The results show that the forsterite surface is highly reactive with the primary reaction products being a mixture of nesquehonite (MgCO3.3H2O) and magnesite (MgCO3) at short reaction times ({approx}3-4 days) and then magnesite (MgCO3) and a highly porous amorphous silica phase at longer reaction times (14 days). After 14 days of reaction most of the original forsterite transformed to reaction products. Importantly, the formation of magnesite was observed at temperatures much lower (35 C) than previously thought needed to overcome its well known sluggish precipitation kinetics. The conversion of nesquehonite to magnesite liberates H2O which can potentially facilitate further metal carbonation, as postulated by previous investigators, based upon studies at higher temperature (80 C). The observation that magnesite can form at lower temperatures implies that water recycling may also be important in determining the rate and extent of mineral carbonation in a wide range of potential CO2 storage reservoirs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring viral particle, soil, and extraction buffer physicochemical characteristics and their impacts on extractable viral communities

Viruses are expected to be pivotal members of soil ecosystems, and recent advances in viral size fraction metagenomic (viromic) approaches have improved our ability to interrogate soil viral ecology. However, viromics relies on extraction buffers to effectively desorb viral particles from the soil matrix for downstream analysis, and viral extraction efficiency could be affected by the interplay between viral particles, soils, and extraction buffer chemistry. Here, we investigated whether extraction buffer chemistry affected extractable viral community composition measured by viromics from different soil types, for both biological (samples collected 1 m apart) and technical (subsamples from the same soil homogenate) replicates. We investigated pH manipulation of protein-supplemented phosphate-buffered saline buffer (PPBS, pHs 4.5, 5.5, 6.5, and 7.5) on forest, grassland and wetland soils that exhibited different soil edaphic properties, and we tested different buffer chemistries (PPBS, Carbonated Buffer, Glycine, and Saline Magnesium) on just the wetland soil. Spatial distance (i.e., biological replicate) was the primary driver of extractable viral community composition across all buffers and soils tested. Differences in viral community composition according to extraction buffer properties were only observed in the grassland technical replicates at PPBS buffer pH 4.5, and in both the wetland technical and biological replicates treated with different buffer chemistries, but the effects of buffer chemistry were secondary to spatial distance in the biological replicates. The lack of buffering capacity in the grassland soil technical replicates likely increased sorption of viral particles at pH 4.5, but neither protein composition nor isoelectric point explained this phenomenon. In conclusion, given that most soil viral ecological studies to date include sample collection over distances much farther apart than the 1-m distances considered here, results suggest that extraction buffer chemistry is likely of much lower importance than ecological considerations, such as spatial distance, in the design of future soil viral ecological investigations.

59 BASIC BIOLOGICAL SCIENCES↗

Key drivers of cloud response to surface-active organics

Aerosol-cloud interactions constitute the largest source of uncertainty in global radiative forcing estimates, hampering our understanding of climate evolution. Recent empirical evidence suggests surface tension depression by organic aerosol to significantly influence the formation of cloud droplets, and hence cloud optical properties. In climate models, however, surface tension of water is generally assumed when predicting cloud droplet concentrations. Here we show that the sensitivity of cloud microphysics, optical properties and shortwave radiative effects to the surface phase are dictated by an interplay between the aerosol particle size distribution, composition, water availability and atmospheric dynamics. We demonstrate that accounting for the surface phase becomes essential in clean environments in which ultrafine particle sources are present. Through detailed sensitivity analysis, quantitative constraints on the key drivers – aerosol particle number concentrations, organic fraction and fixed updraft velocity – are derived for instances of significant cloud microphysical susceptibilities to the surface phase.

54 ENVIRONMENTAL SCIENCES↗

The role of interparticle heterogeneities in the selenization pathway of Cu-Zn-Sn-S nanoparticle thin films: A real-time study

Real-time energy dispersive x-ray diffraction (EDXRD) analysis has been utilized to observe the selenization of Cu-Zn-Sn-S nanoparticle films coated from three nanoparticle populations: Cu- and Sn-rich particles roughly 5 nm in size, Zn-rich nanoparticles ranging from 10 to 20 nm in diameter, and a mixture of both types of nanoparticles (roughly 1:1 by mass), which corresponds to a synthesis recipe yielding CZTSSe solar cells with reported total-area efficiencies as high as 7.9%. The EDXRD studies presented herein show that the formation of copper selenide intermediates during the selenization of mixed-particle films can be primarily attributed to the small, Cu- and Sn-rich particles. Moreover, the formation of these copper selenide phases represents the first stage of the CZTSSe grain growth mechanism. The large, Zn-rich particles subsequently contribute their composition to form micrometer-sized CZTSSe grains. In conclusion, these findings enable further development of a previously proposed selenization pathway to account for the roles of interparticle heterogeneities, which in turn provides a valuable guide for future optimization of processes to synthesize high quality CZTSSe absorber layers.

36 MATERIALS SCIENCE↗

Automatic detection of impact craters on Al foils from the Stardust interstellar dust collector using convolutional neural networks

NASA's Stardust mission utilized a sample collector composed of aerogel and aluminum foil to return cometary and interstellar particles to Earth. Analysis of the aluminum foil begins with locating craters produced by hypervelocity impacts of cometary and interstellar dust. Interstellar dust craters are typically less than one micrometer in size and are sparsely distributed, making them difficult to find. In this paper, we describe a convolutional neural network based on the VGG16 architecture that achieves high specificity and sensitivity in locating impact craters in the Stardust interstellar collector foils. Finally, we evaluate its implications for current and future analyses of Stardust samples.

79 ASTRONOMY AND ASTROPHYSICS↗

Imaging Cycle-Induced Damage of MnO 2 Microparticles

MnO 2 has been proposed as an electrode material in electrochemical energy storage devices. However, poor cycle life, especially in aqueous electrolytes, remains a detriment to commercialization. Prior studies have suggested a number of explanations for this capacity loss; however, experiments aimed at elucidating the details of the degradation process (es) are sparse. We describe here a microtube-membrane construct that allows for electrodeposition of monodisperse MnO 2 microparticles distributed across the membrane surface, and for subsequent electrochemical cycling of these MnO 2 particles. This allowed for a detailed analysis of the effect of cycling on the MnO 2 , by simply imaging the membrane surface before and after cycling. When an aqueous electrolyte was used, gross changes in particle shape, size and morphology were observed over the course of 500 cycles. Partial dissolution occurred as well. No such changes were observed when the MnO 2 particles were cycled (up to 500 times) in a propylene carbonate electrolyte solution.

36 MATERIALS SCIENCE↗

Sources of stochasticity in the growth of cloud droplets: supersaturation fluctuations versus turbulent transport

The role played by fluctuations of supersaturation in the growth of cloud droplets is examined in this study. The stochastic condensation framework and the three regimes of activation of cloud droplets – namely, mean-dominant, fluctuation-influenced, and fluctuation-dominant, are used for analyzing the data from high-resolution large-eddy simulations of the Pi convection-cloud chamber. Based on a detailed budget analysis the significance of all the terms in the evolution of the droplet size distribution equation is evaluated in all three regimes. The analysis indicates that the mean-growth rate is a dominant process in shaping the droplet size distribution in all three regimes. Turbulence introduces two sources of stochasticity, turbulent transport and particle lifetime, and supersaturation fluctuations. The transport of cloud droplets plays an important role in all three regimes, whereas the direct effect of supersaturation fluctuations is primarily related to the activation and growth of the small droplets in the fluctuation-influenced and fluctuation-dominant regimes. Here, we compare our results against the previous studies (experimental and theory) of the Pi chamber, and discuss the limitations of the existing models based on the stochastic condensation framework. Furthermore, we extend the discussion of our results to atmospheric clouds, and in particular focus on recent adiabatic turbulent cloud parcel simulations based on the stochastic condensation framework, and emphasize the importance of entrainment/mixing and turbulent transport in shaping the droplet size distribution.

54 ENVIRONMENTAL SCIENCES↗

How does pelleting alter the enzymatic digestibility of corn stover?

Pelleting of lignocellulosic biomass facilitates its transportation, storage and handling and offers opportunities to improve the enzymatic digestibility of pelleted biomass. Here, we report the impact of pelleting on the enzymatic digestibility of corn stover prior to pretreatment and associated substrate characteristics. Pelleting almost doubles the digestibility of unpretreated corn stover, from 8.2 to 15.5% glucan conversion, at 5% solid loading using 1 FPU Cellic CTec2 per g solids. Compositional analysis indicates that loose and pelleted corn stover have similar non-dissolvable compositions, although their extractives are slightly different. Enzymatic hydrolysis of washed corn stover after size reduction to normalize particle sizes and removal of extractives confirms that pelleting improves corn stover digestibility. Such differences may be explained by the decreased particle size, increased specific surface area, improved cellulose accessibility, and reduction of the polymer length of cellulose induced by pelleting. These findings help to design processing schemes for sustainable and efficient use of lignocellulose.

Chen, Xueli↗

Analysis of cloud polarization measurements

The polarization of sunlight reflected by various cloud types was measured in the near-infrared with a polarimeter flown aboard the NASA Convair 990. The data reduction has been completed and detailed comparisons have been made between the observations and theoretical computations. The analysis presented shows that the polarization in the near-infrared can be used on a routine basis to reliably yield the cloud particle phase (water or ice) and the average particle size in the top part of water clouds (usually within + or - 25%). In some cases the polarization also yields the cloud optical thickness (or a lower limit) and a measure of the width of the particle size distribution in the top of the water clouds.

Hansen, J. E.↗

An ionic mechanism of carbon formation in flames

The formation of incipient carbon in flames can be described by a series of elementary reactions in which the precursor of soot is the ion C3H3+, and the major building block is acetylene, polyacetylenes, or other hydrocarbon fragments which are present in large concentrations. The precursor ion is produced by nonequilibrium chemi-ionization reactions, e.g., CH asterisk plus C2H2 yields C3H3+ plus e or CH asterisk plus O yields CHO+ plus e. The CHO+ rapidly becomes C3H3+ through a series of ion-molecule reactions. The chemi-ion then adds acetylene in a series of very rapid ion-molecule reactions producing larger and larger ions. Ions isomerize very rapidly to produce aromatic structures overcoming one of the major problems with neutral species mechanisms: how to form the first carbon ring. As the ions grow, their recombination rate coefficients with electrons increase so that the larger ions are removed by dissociative recombination. These neutral species now continue to grow by the addition of more acetylene producing even larger neutral species. With increasing size, the rate coefficient of electron attachment also increases causing the reaction to become important, depending upon the temperature. Appreciable concentrations of negative ions shift the ion removal process to dissociative ion-ion recombination, which is orders of magnitude slower than ion-electron recombination. As the neutral species continue to grow by the addition of acetylene, they gradually take on the aspect of particles, i.e., the bulk properties of the substance CxHy dominate over the chemical properties. This change is gradual and there is no distinct size at which a large molecule becomes a particle. Evidence will be presented supporting the above mechanism. All of the ions proposed in the mechanism have been observed by mass spectrometric analysis, their concentrations measured, and their rates of reaction in the flame environment determined to be adequate to account for the observed rate of formation of carbon.

Calcote, H. F.↗

Lunar and Planetary Science XXXV: Interplanetary Dust and Aerogel

Contents include the following: Isotopically Primitive Interplanetary Dust Particles of Cometary Origin: Evidence from Nitrogen Isotopic Compositions. The Solar Nebula s First Accretionary Particles (FAPs) Are They Preserved in Collected Interplanetary Dust Samples? On the Origin of GEMS. An Analytical SuperSTEM for Extraterrestrial Materials Research. Sub-Micrometer Scale Minor Element Mapping in Interplanetary Dust Particles: A Test for Stratospheric Contamination. First Report of Taenite in an Asteroidal Interplanetary Dust Particle: Flash-heating Simulates Nebular Dust Evolution. FTIR Analyses of IDPs: Comparison with the InfraRed Spectra of the Interstellar Medium. Mineralogical Study of Hydrated IDPs: X-Ray Diffraction and Transmission Electron Microscopy. Focused Ion Beam Recovery and Analysis of Interplanetary Dust Particles (IDPs) and Stardust Analogues. Technique for Concentration of Carbonaceous Material from Aerogel Collectors Using HF-Vapor Etching. Synchrotron X-Ray Analysis of Captured Particle Residue in Aerogel. In-Situ Analyses of Earth Orbital Grains Trapped in Aerogel, Using Synchrotron X-Ray Microfluorescence Techniques. Igneous Rims on Micrometeorites and the Sizes of Chondrules in Main Belt Asteroids.

Source record↗

Laboratory Spectroscopy of Large Carbon Molecules and Ions in Support of Space Missions. A New Generation of Laboratory & Space Studies

Polycyclic Aromatic Hydrocarbons (PAHs) are an important and ubiquitous component of carbon-bearing materials in space. A long-standing and major challenge for laboratory astrophysics has been to measure the spectra of large carbon molecules in laboratory environments that mimic (in a realistic way) the physical conditions that are associated with the interstellar emission and absorption regions [1]. This objective has been identified as one of the critical Laboratory Astrophysics objectives to optimize the data return from space missions [2]. An extensive laboratory program has been developed to assess the properties of PAHs in such environments and to describe how they influence the radiation and energy balance in space. We present and discuss the gas-phase electronic absorption spectra of neutral and ionized PAHs measured in the UV-Visible-NIR range in astrophysically relevant environments and discuss the implications for astrophysics [1]. The harsh physical conditions of the interstellar medium characterized by a low temperature, an absence of collisions and strong VUV radiation fields - have been simulated in the laboratory by associating a pulsed cavity ringdown spectrometer (CRDS) with a supersonic slit jet seeded with PAHs and an ionizing, penning-type, electronic discharge. We have measured for the {\it first time} the spectra of a series of neutral [3,4] and ionized [5,6] interstellar PAHs analogs in the laboratory. An effort has also been attempted to quantify the mechanisms of ion and carbon nanoparticles production in the free jet expansion and to model our simulation of the diffuse interstellar medium in the laboratory [7]. These experiments provide {\it unique} information on the spectra of free, large carbon-containing molecules and ions in the gas phase. We are now, for the first time, in the position to directly compare laboratory spectral data on free, cold, PAH ions and carbon nano-sized carbon particles with astronomical observations in the UV-NIR range (interstellar UV extinction, DIBs in the NUV-NIR range). This new phase offers tremendous opportunities for the data analysis of current and upcoming space missions geared toward the detection of large aromatic systems Le., the "new frontier space missions" (Spitzer, HST, COS, JWST, SOFIA,...).

Salama, Farid↗

Figure of Merit Characteristics Compared to Engineering Parameters

A workshop held in 2005 defined a large number of parameters of interest for users of lunar simulants. The need for formal requirements and standards in the manufacture and use of simulants necessitates certain features of measurements. They must be definable, measureable, useful, and primary rather than derived. There are also certain features that must be avoided. Analysis of the total parameter list led to the realization that almost all of the parameters could be tightly constrained, though not predicted, if only four properties were measured: Particle composition, particle size distribution, particle shape distribution, and bulk density. These four are collectively referred to as figures of merit (FoMs). An evaluation of how each of the parameters identified in 2005 is controlled by the four FoMs is given.

Rickman, D.L.↗

X-ray driven channeling acceleration in crystals and carbon nanotubes

Acceleration of particles channeling in a crystal by means of diffracted x-rays via Bormann anomalous transmission was conceived for heavy ions and muons by Tajima and Cavenago [Phys. Rev. Lett. 59, 1440 (1987)], which potentially offers an appreciably high field gradient on the order of GV/cm. The theoretical model of the high gradient acceleration has been studied in two kinds of atomic structure, crystals and carbon nanotubes (CNTs), with analytic calculations and electromagnetic eigenmode simulations. A range of acceleration gradients and cutoffs of the x-ray power (the lowest power limit to overcome the Bremsstrahlung radiation losses) are characterized in terms of the lattice constants, unit cell sizes, and photon energies. The parametric analysis indicates that the required x-ray power can be reduced to an order of megawatt by replacing crystals with CNTs. Eventually, the equivalent dielectric approximation of a multi-wall nanotube shows that 250–810 MeV muons can be synchronously coupled with x-rays of 0.65–1.32 keV in the accelerating structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A simplified integrated framework for predicting the economic impacts of feedstock variations in a catalytic fast pyrolysis conversion process

Feedstock attributes of lignocellulosic biomass, such as particle size, compositional makeup, and moisture content, can vary substantially even within pre-processed materials and have a significant effect on conversion in fast pyrolysis-based processes. However, the economic impacts of these attributes are not well understood. To address this, biomass deconstruction phenomena captured with a versatile particle-scale simulation were linked to techno-economic impacts via reduced-order models. Parametric analysis of the particle-scale model, which was validated using literature data, was used in combination with multiple linear regression models to develop correlations between feedstock attributes and yields of pyrolysis oil, gas, and char. Yields were then correlated with the minimum fuel selling price (MFSP) using a techno-economic model, bridging the gap between physics-based biomass conversion simulations and predictions of MFSP for a catalytic fast-pyrolysis process. Empirical correlations derived from the literature regarding the impact of mineral matter (ash) on oil yield were also considered. The model correlations deployed in the integrated framework capture the impacts of variation in feedstock attributes on the MFSP. Variations in ash were shown to have the biggest impact, varying MFSP by -13%/+22% due to catalytic effects and lower relative amounts of convertible lignocellulosic material. It was also found that, if ash can be controlled to low levels, the increased extractives in forest residues can help compensate for some yield losses associated with increased ash. As a result, other inputs considered (particle size, moisture content, and reactor temperature) had relatively negligible effects on process economics within the ranges analyzed considering particle-scale effects alone.

BIOMASS FUELS↗

A comprehensive investigation on the properties of nanostructured cerium oxide

The structural, optical, magnetic and electrical properties of cerium oxide (CeO{sub 2}) nanoparticles prepared by hydrothermal route are analyzed by subjecting them to characterization techniques such as Powder X-ray diffraction (PXRD), High resolution scanning electron microscope (HRSEM), High resolution transmission electron microscope (HRTEM), Energy Dispersive X-ray Analysis (EDAX), Fourier transform infra red spectroscopy (FTIR), Raman spectroscopy, Ultraviolet–Visible analysis, Vibrating sample magnetometer (VSM) analysis and Dielectric measurements. The PXRD, FTIR, Raman and EDAX analyses confirm the formation of CeO{sub 2} nanoparticles. The PXRD studies reveal that the cerium oxide nanoparticles have crystalline nature and have Face Centered Cubic structure. The average crystallite size, estimated using Scherrer formula, is 7 nm. The HRSEM and HRTEM images reveal that the CeO{sub 2} nanoparticles have spherical morphology with an average particle size of 23 nm. The optical band gap energy of the cerium oxide nanoparticles, calculated from UV–Vis studies, is 3.4 eV which could be due to the substantial concentration of Ce{sup 3+} ions in the ceria nanoparticles. The Ferromagnetic behavior of CeO{sub 2} at room temperature is implied from VSM studies. The Dielectric analysis divulge that the dielectric constant of cerium oxide nanoparticles decreases as the frequency and temperature increases. The electrical behaviour, activation energy and relaxation time of electrons of CeO{sub 2} nanoparticles are studied by plotting Nyquist plot, Arrhenius plot and Bode plot respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗