Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHYSICS LABORATORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Particle Size Measurements from the first Fundamentals of Ice Crystal Icing Physics Test in the NASA Propulsion Systems Laboratory

This presentation shows particle measurements by the Artium Technologies, Inc. Phase Doppler Interferometer and High Speed Imaging instruments from the first Fundamental Ice Crystal Icing Physics test conducted in the NASA Propulsion Systems Laboratory. The work focuses on humidity sweeps at a larger and a smaller median volumetric diameter. The particle size distribution, number density, and water content measured by the Phase Doppler Interferometer and High Speed Imaging instruments from the sweeps are presented and compared. The current capability for these two instruments to measure and discriminate ICI conditions is examined.

thermal scaling↗

Development of Short-Pulse Laser-Based Diagnostics for Pulsed Power-Driven Warm Dense Matter

This report summarizes a research project conducted at the Physics Department’s Zebra Pulsed Power Laboratory (ZPPL) at the University of Nevada Reno, aimed at developing short-pulse laser-based diagnostics to probe pulsed-power-driven warm dense matter. ZPPL combines a MegaAmpere (MA) pulsed power generator, Zebra, and a relativistic intensity, short-pulse laser, Leopard, offering a unique university-scale platform for high energy density physics, laboratory astrophysics, and inertial fusion energy research. The project focused on establishing a hard X-ray radiographic capability using high-intensity, short-pulse laser-generated X-rays to probe warm dense matter created by the Zebra current. Initial experiments produced X-ray radiographs of a static (cold) aluminum wire using silver and gold foil and wire targets, but intense background radiation from Zebra shots overwhelmed the laser-produced X-rays. To mitigate this, a radiationhardened detector housing was designed and implemented. Additional diagnostic, including a filter stack bremsstrahlung spectrometer and an X-ray pinhole camera, were developed to characterize laser-produced hard X-ray spectra and locate hard X-ray sources in the vacuum chamber. These revealed that strong hard X-rays (> 20 keV) originated near the anode cap, bombarded by energetic electrons. Due to laser unavailability during some experiments, detector performance was successfully tested using hard X-ray sources from the Zebra current, demonstrating their readiness for coupled experiments. The project supported one Ph.D. student (Dr. Lei Chen), who conducted experimental and numerical research, and provided training opportunities and data for three undergraduate senior theses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Interfacial Magnetic Skyrmions and Proximity Effects

The goal of this project is to study the fundamental physics of the magnetic skyrmion, an emergent topological spin texture with whirlpool-like spin winding configuration. Distinguishing functionality of the skyrmion can be achieved only when its exotic topological properties are fully understood and control of skyrmions is mastered. In this project, special attention is paid to creation and manipulation of interfacial skyrmions, and skyrmions in confined or hybrid structures. Relevant topics on interfacial magnetism in general are also covered. This project also promotes the skyrmion physics in national laboratories through partnership with the Argonne National Laboratory (ANL).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lithium‐Containing Hybrid SEI Layer Enabling High Mass Loading and Anode‐Less Sodium Metal Batteries

Abstract The continuous rupturing and rebuilding of unstable solid electrolyte interphase (SEI) layer during cycling would block Na + diffusion and induce Na dendrite formation, ultimately limiting the practical application of high‐energy‐density sodium metal batteries. Herein, a hybrid SEI layer containing Li‐species is dexterously constructed on the surface of sodium metal anode. Li‐containing inorganic components (Li 3 N, LiF, and Li 2 CO 3 ) are introduced to stabilize the Na/electrolyte interface and enhance the mechanical and diffusion kinetic properties of the SEI layer, which can reduce the side reactions and gas generation, regulate Na + flux during cycling and promote rapid Na + migration for uniform dendrite‐free Na deposition. As a result, the constructed Na symmetric cells achieve low overpotential and long cycle life of 5900, 1800, and 500 h at current densities of 3, 10, and 30 mA cm −2 , respectively. Furthermore, the full cells paired with the Na₃V₂(PO₄)₃ cathode demonstrate high specific capacity and excellent cycle stability, even at an ultra‐high cathode loading of 39.3 mg cm −2 and a low N/P ratio (negative/positive electrode capacity ratio of 1.21).

Xia, Li [State Key Laboratory of Physical Chemistr↗

Momentum Spectrum of Cosmic Muons at a Depth of 320 Mwe

Since their discovery, great progress has been achieved in the field of cosmic ray physics particularly towards the understanding of the origin, transport and acceleration mechanisms of the high energy particles that constitute primary cosmic rays, their interaction processes in the galactic and extra galactic media, and also in the Earth's atmosphere. The interaction of primary cosmic ray particles in the Earth's atmosphere leads to the production of a cascade of secondary particles or Extensive Air Showers (EAS) with various components - electromagnetic, hadronic, muon and neutrino components. There is a large number of models to describe these interactions. Many cosmic ray experiments have used a variety of observables in EAS that provide an understanding of the hadronic interactions and also shed some light on the chemical composition of the primary particles. The muon flux at the surface provides a useful tool for the calculations of neutrino fluxes, the reconstruction of EAS and it can serve as a test of various interaction models. The CosmoALEPH detector, whichwas one of the experiments in CosmoLEP used the ALEPH detector at the European Laboratory for Particle Physics, CERN, to measure the muonic component of EAS. Preliminary results have recently shown that the momentum spectrum and charge ratio for cosmic muons measured by CosmoALEPH are well within the world average. This work reports on further improvements in the reconstruction of the cosmic muon events and data analysis. Cosmic muons are produced through interactions of primary cosmic radiation in the atmosphere. They are a component of extensive air showers which can also be measured underground. The CosmoALEPH experiment used the ALEPH detector at the European Laboratory for Particle Physics, CERN, to measure cosmic muon events at a depth of 320 mwe underground. The momentum spectrum and charge ratio of the cosmic muons are measured. The results are compared with the expectations from MC simulations based on different hadronic interaction models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Widen the resonance at ultra-high energies: novel probes of neutrino self-interactions in the high-mass regime

Neutrino self-interactions beyond the Standard Model are well motivated by the nonzero masses of neutrinos, which are the only known particles guaranteed to have new physics. Meanwhile, cosmic messengers, especially neutrinos, play a central role in probing new physics, as they provide experimental conditions far beyond the reach of laboratories and serve as the link between laboratory fundamental-physics discoveries and their roles in the Universe, where many new physics motivations originate.In this work, we propose a novel probe of neutrino self-interactions through ultrahigh-energy neutrinos scattering off the cosmic neutrino background when the lightest neutrino species remains relativistic today.This allows us to “Widen the Resonance” of such scattering [1].In addition, we also provide a semi-analytic framework for cosmogenic ultrahigh-energy neutrino production, avoiding computationally intensive simulations and yielding results precise enough for beyond-the-standard-model studies.The widened resonance enables future ultrahigh-energy neutrino telescopes,in particular GRAND, to probe mediator masses from MeV to GeV, reaching couplings down to g ∼ 10$^{-3}$ — up to two orders of magnitude beyond current bounds.Our results enhance the discovery potential of neutrino self-interactions in the high-mass regime, potentially offering crucial insights into the connections between the neutrino sector and dark sector.

Machado, Pedro A.N. [Fermilab] (ORCID:000000029118↗

Scalar-induced neutrinoless double beta decay in SU(5)

We discuss the role of heavy scalar fields in mediating neutrinoless double beta decay (0νββ) within the SU(5) Grand Unified Theory framework, extended suitably to include neutrino mass. In such a minimal realistic SU(5) setup for fermion masses, the scalar contributions to 0νββ are extremely suppressed as a consequence of the proton decay bound. We circumvent this problem by imposing a discrete Z 3 symmetry. However, the scalar contributions to 0νββ remain suppressed in this SU(5) x Z 3 model due to the neutrino mass constraint. We find that the 0νββ contribution can be enhanced by extending the scalar sector with an additional 15-dimensional scalar representation with suitable Z 3 charge. Such an extension not only yields realistic fermion mass spectra but also leads to experimentally testable predictions in upcoming ton-scale 0νββ searches, which can be used as a sensitive probe of the new scalars across a broad range, from LHC-accessible scales up to ∼ 10 10 GeV.

Baryon/Lepton Number Violation↗

Physical Properties of Ambient and Laboratory-Generated Secondary Organic Aerosol

The size and thickness of organic aerosol particles collected by impaction in five field campaigns were compared to those of laboratory generated secondary organic aerosols (SOA). Scanning transmission x-ray microscopy (STXM) was used to measure the total carbon absorbance (TCA) by individual particles as a function of their projection areas on the substrate. Because they flatten less upon impaction, particles with higher viscosity and surface tension can be identified by a steeper slope on a plot of TCA vs. size. The slopes of the ambient data are statistically similar indicating a small range of average viscosities and surface tensions across five field campaigns. Steeper slopes were observed for the plots corresponding to ambient particles, while smaller slopes were indicative of the laboratory generated SOA. This comparison indicates that ambient organic particles have higher viscosities and surface tensions than those typically generated in laboratory SOA studies.

Environmental Molecular Sciences Laboratory↗

CO 2 rock physics modeling for reliable monitoring of geologic carbon storage

Monitoring, verification, and accounting (MVA) are crucial to ensure safe and long-term geologic carbon storage. Seismic monitoring is a key MVA technique that utilizes seismic data to infer elastic properties of CO 2 -saturated rocks. Reliable accounting of CO 2 in subsurface storage reservoirs and potential leakage zones requires an accurate rock physics model. However, the widely used CO 2 rock physics model based on the conventional Biot-Gassmann equation can substantially underestimate the influence of CO 2 saturation on seismic waves, leading to inaccurate accounting. We develop an accurate CO 2 rock physics model by accounting for both effects of the stress dependence of seismic velocities in porous rocks and CO 2 weakening on the rock framework. We validate our CO 2 rock physics model using the Kimberlina-1.2 model (a previously proposed geologic carbon storage site in California) and create time-lapse elastic property models with our new rock physics method. We compare the results with those obtained using the conventional Biot-Gassmann equation. Our innovative approach produces larger changes in elastic properties than the Biot-Gassmann results. Using our CO 2 rock physics model can replicate shear-wave speed reductions observed in the laboratory. Our rock physics model enhances the accuracy of time-lapse elastic-wave modeling and enables reliable CO 2 accounting using seismic monitoring.

58 GEOSCIENCES↗

Performance Characteristics of HYDRA - a Multi-Physics simulation code from Lawrence Livermore National Laboratory

HYDRA is used to simulate a variety of experiments carried out at the National Ignition Facility (NIF) [4] and other high energy density physics facilities. HYDRA has packages to simulate radiation transfer, atomic physics, hydrodynamics, laser propagation, and a number of other physics effects. HYDRA has over one million lines of code and includes both MPI and thread-level (OpenMP and pthreads) parallelism. This paper measures the performance characteristics of HYDRA using hardware counters on an IBM BlueGene/Q system. We report key ratios such as bytes/instruction and memory bandwidth for several different physics packages. The total number of bytes read and written per time step is also reported. We show that none of the packages which use significant time are memory bandwidth limited on a Blue Gene/Q. HYDRA currently issues very few SIMD instructions. The pressure on memory bandwidth will increase if high levels of SIMD instructions can be achieved.

97 MATHEMATICS AND COMPUTING↗

The physical nature of Titan's aerosols: Laboratory simulations

The atmosphere of Titan is known to contain aerosols, as evidenced by the Voyager observations of at least three haze layers. Such aerosols can have significant effects on the reflection spectrum of Titan and on the chemistry and thermal structure of its atmosphere. To investigate some of these effects laboratory simulations of the chemistry of Titan's atmosphere have been done. The results of these studies show that photolysis of acetylene, ethylene, and hydrogen cyanide, known constituents of Titan's atmosphere, yields sub-micron sized spheres, with mean diameters ranging from 0.4 to 0.8 micron, depending on the pressures of the reactant gases. Most of the spheres are contained in near-linear aggregates. The formation of the aggregates is consistent with models of Titan's reflection spectrum and polarization, which are best fit with non-spherical particles. At room temperature, the particles are very sticky, but their properties at low temperatures on Titan are presently not known.

Scattergood, T. W.↗

Goddard Visiting Scientist Program

Under this Indefinite Delivery Indefinite Quantity (IDIQ) contract, USRA was expected to provide short term (from I day up to I year) personnel as required to provide a Visiting Scientists Program to support the Earth Sciences Directorate (Code 900) at the Goddard Space Flight Center. The Contractor was to have a pool, or have access to a pool, of scientific talent, both domestic and international, at all levels (graduate student to senior scientist), that would support the technical requirements of the following laboratories and divisions within Code 900: 1) Global Change Data Center (902); 2) Laboratory for Atmospheres (Code 910); 3) Laboratory for Terrestrial Physics (Code 920); 4) Space Data and Computing Division (Code 930); 5) Laboratory for Hydrospheric Processes (Code 970). The research activities described below for each organization within Code 900 were intended to comprise the general scope of effort covered under the Visiting Scientist Program.

Source record↗

Dynamics of Nuclear Regions of Galaxies

Current research carried out with the help of the ASEE-NASA Summer Faculty Program, at NASA-Ames, is concentrated on the dynamics of nuclear regions of galaxies. From a dynamical point of view a galaxy is a collection of around 10(sup 11) stars like our Sun, each of which moves in the summed gravitational field of all the remaining stars. Thus galaxy dynamics becomes a self-consistent n-body problem with forces given by Newtonian gravitation. Strong nonlinearity in the gravitational force and the inherent nonlinearity of self-consistent problems both argue for a numerical approach. The technique of numerical experiments consis of constructing an environment in the computer that is as close as possible to the physical conditions in a real galaxy and then carrying out experiments much like laboratory experiments in physics or engineering, in this environment. Computationally, an experiment is an initial value problem, and a good deal of thought and effort goes into the design of the starting conditions that serve as initial values. Experiments are run at Ames because all the 'equipment' is in place-the programs, the necessary computational power, and good facilities for post-run analysis. Our goal for this research program is to study the nuclear regions in detail and this means replacing most of the galaxy by a suitable boundary condition to allow the full capability of numerical experiments to be brought to bear on a small region perhaps 1/1000 of the linear dimensions of an entire galaxy. This is an extremely delicate numerical problem, one in which some small feature overlook, can easily lead to a collapse or blow-up of the entire system. All particles attract each other in gravitational problems, and the 1/r(sup 2) force is: (1) nonlinear; (2) strong at short range; (3) long-range, and (4) unscreened at any distance.

Miller, Richard H.↗

Coupling of nTRACER to COBRA-TF for full core high-fidelity analysis of VVERs

The evolution of computing clusters allows the use of high-resolution multi-physics solvers for reactor analysis. Despite the continuous expansion of VVER technology, only one other high-fidelity sub-pin multi-physics core solver is currently developed for safety analysis. To that end the Laboratory of Reactor Physics and Thermal-Hydraulics (LRT) of Paul Scherrer Institut is developing such a tool with the coupling of the neutronic code nTRACER and the sub-channel code COBRA-TF. This work follows the initial steps of the coupling and focuses to the extension of the core solver to full core VVER geometries. The X2 VVER-1000 benchmark is modeled with the novel core solver. The results are compared to the ones of a standalone nTRACER calculation where the feedbacks are provided by a simplified 1D thermal-hydraulic solver. Despite relatively good agreement in power distribution, the limitations of the simplified solver become apparent especially when comparing global temperature profiles. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗