Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOSPHORUS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Nanoscale Solid State Batteries Enabled by Thermal Atomic Layer Deposition of a Lithium Polyphosphazene Solid State Electrolyte

Several active areas of research in novel energy storage technologies, including three-dimensional solid state batteries and passivation coatings for reactive battery electrode components, require conformal solid state electrolytes. We describe an atomic layer deposition (ALD) process for a member of the lithium phosphorus oxynitride (LiPON) family, which is employed as a thin film lithium-conducting solid electrolyte. The reaction between lithium tert-butoxide (LiO t Bu) and diethyl phosphoramidate (DEPA) produces conformal, ionically conductive thin films with a stoichiometry close to Li 2 PO 2 N between 250 and 300°C. The P/N ratio of the films is always 1, indicative of a particular polymorph of LiPON which closely resembles a polyphosphazene. Films grown at 300°C have an ionic conductivity of (6.51 ± 0.36)×10 -7 S/cm at 35°C, and are functionally electrochemically stable in the window from 0 to 5.3V vs. Li/Li + . We demonstrate the viability of the ALD-grown electrolyte by integrating it into full solid state batteries, including thin film devices using LiCoO 2 as the cathode and Si as the anode operating at up to 1 mA/cm 2 . The high quality of the ALD growth process allows pinhole-free deposition even on rough crystalline surfaces, and we demonstrate the fabrication and operation of thin film batteries with the thinnest (<40nm) solid state electrolytes yet reported. Finally, we show an additional application of the moderate-temperature ALD process by demonstrating a flexible solid state battery fabricated on a polymer substrate.

25 ENERGY STORAGE↗

Effects of Catalyst Phase on the Hydrogen Evolution Reaction of Water Splitting: Preparation of Phase-Pure Films of FeP, Fe 2 P, and Fe 3 P and Their Relative Catalytic Activities

The comparative catalytic activities of iron phosphides, Fe x P (x = 1–3), have been established with phase-pure material grown by chemical vapor deposition (CVD) from single-source organometallic precursors. This is the first report of the preparation of phase-pure thin films of FeP and Fe 2 P, and their identity was established with scanning-electron microscopy, X-ray photoelectron spectroscopy, and powder X-ray diffraction. All materials were deposited on fluorine-doped tin oxide (FTO) for evaluation of their activities toward the hydrogen evolution reaction (HER) of water splitting in 0.5 M H 2 SO 4 . HER activity follows the trend Fe 3 P > Fe 2 P > FeP, with Fe 3 P having the lowest overpotential of 49 mV at a current density of 10 mA cm –2 . Density functional theory (DFT) calculations are congruent with the observed activity trend with hydrogen binding favoring the iron-rich terminating surfaces of Fe 3 P and Fe 2 P over the iron-poor terminating surfaces of FeP. The results present a clear trend of activity with iron-rich phosphide phases outperforming phosphorus rich phases for hydrogen evolution. The films of Fe 2 P were grown using Fe(CO) 4 PH 3 (1), while the films of FeP were prepared using either Fe(CO) 4 P t BuH 2 (2) or the new molecule {Fe(CO)4P(H)tBu}2 (3) on quartz and FTO. Compound 3 was prepared from the reaction of PCl 2 t Bu with a mixture of Na[HFe(CO) 4 ] and Na 2 [Fe(CO) 4 ] and characterized by single-crystal X-ray diffraction, ESI-MS, elemental analysis, and 31 P/ 1 H NMR spectroscopies. Films of Fe 3 P were prepared as previously described from H 2 Fe 3 (CO) 9 P t Bu (4).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recycling of Nutrients from Dairy Wastewater by Extremophilic Microalgae with High Ammonia Tolerance

This study explored the possibility of incorporating extremophilic algal cultivation into dairy wastewater treatment by characterizing a unique algal strain. Results showed that extremophilic microalgae Chlorella vulgaris CA1 newly isolated from dairy wastewater tolerated a high level of ammonia nitrogen (2.7 g/L), which was over 20 times the ammonia nitrogen that regular Chlorella sp. could tolerate. The isolate was mixotrophically cultured in dairy effluent treated by anaerobic digestion (AD) for recycling nutrients and polishing the wastewater. The highest biomass content of 13.3 g/L and protein content of 43.4% were achieved in the culture in AD effluent. Up to 96% of the total nitrogen and 79% of the total phosphorus were removed from the dairy AD effluent. The ability of the algae to tolerate a high level of ammonia nitrogen suggests the potential for direct nutrient recycling from dairy wastewater while producing algal biomass and high value bioproducts.

54 ENVIRONMENTAL SCIENCES↗

Adsorption Mechanisms of Glyphosate on Ferrihydrite: Effects of Al Substitution and Aggregation State

Ferrihydrite is one of the most reactive iron (Fe) (oxyhydr)oxides in soils, but the adsorption mechanisms of glyphosate, the most widely used herbicide, on ferrihydrite remain unknown. Here, we determined the adsorption mechanisms of glyphosate on pristine and Al-substituted ferrihydrites with aggregated and dispersed states using macroscopic adsorption experiments, zeta potential, phosphorus K-edge X-ray absorption near-edge structure spectroscopy, in situ attenuated total reflectance Fourier transform infrared spectroscopy coupled with two-dimensional correlation spectroscopy, and multivariate curve resolution analyses. Aggregation of ferrihydrite decreases the glyphosate adsorption capacity. The partial substitution of Al in ferrihydrite inhibits glyphosate adsorption on aggregated ferrihydrite due to the decrease of external specific surface area, while it promotes glyphosate adsorption on dispersed ferrihydrite, which is ascribed to the increase of surface positive charge. Glyphosate predominately forms protonated and deprotonated, depending on the sorption pH, monodentate-mononuclear complexes (MMH 1 /MMH 0 , 77-90%) on ferrihydrites, besides minor deprotonated bidentate-binuclear complexes (BBH 0 , 23-10%). Both Al incorporation and a low pH favor the formation of the BB complex. The adsorbed glyphosate preferentially forms the MM complex on ferrihydrite and preferentially bonds with the Al-OH sites on Al-substituted ferrihydrite. In conclusion, these new insights are expected to be useful in predicting the environmental fate of glyphosate in ferrihydrite-rich environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Speciation and Aqueous Dissolution of Macronutrients in Fire Ash: Variation across Ecosystems and the Effects on Nutrient Cycling

This study investigated the speciation and aqueous dissolution of macronutrients in fire ash from diverse ecosystems and speciation of ash and smoke from laboratory burning, exploring the variations and their causes. The speciation of phosphorus (P), calcium (Ca), and potassium (K) in fire ash from five globally distributed ecosystems was characterized by using X-ray absorption spectroscopy and sequential fractionation. Aqueous dissolution of the macronutrients was measured by batch experiments at acidic and alkaline pHs. The results showed that P existed mainly as Ca phosphates, Ca as double carbonates, calcite, and sulfates, and most K was associated with Ca carbonates. Mineralogy and the relative abundance of the species were primarily controlled by elemental stoichiometry and fire temperature. Differences in Ca and P speciation existed between ash and smoke from laboratory burning, possibly caused by the temperature difference and/or mass fractionation during burning. The rates, extents, and pH dependencies of macronutrient dissolution differed among macronutrients and depended on their speciation, with K being highly soluble and the P and Ca regulated by solution pH. The variability in ash macronutrient chemistry and ecosystemspecific fire ash loads resulted in varying loads and availability of individual macronutrient from fire among ecosystems. This study provides a mechanistic understanding of how fires transform the chemistry of macronutrients and affect macronutrient returns to soils across different ecosystems, which is essential for evaluating the disturbance to ecosystem nutrient cycling by fires.

54 ENVIRONMENTAL SCIENCES↗

Marine Oil Biodegradation

Crude oil has been part of the marine environment for millions of years, and microbes that use its rich source of energy and carbon are found in seawater, sediments and shorelines from the tropics to the polar regions. Catastrophic oil spills stimulate these organisms to ‘bloom’ in a reproducible fashion, and although oil does not provide bioavailable nitrogen, phosphorus or iron, there are enough of these nutrients in the sea that when dispersed oil droplets dilute to low concentrations these low levels are adequate for microbial growth. Most of the hydrocarbons in dispersed oil are degraded in aerobic marine waters with a half-life of days to months. In contrast, oil that reaches shorelines is likely to be too concentrated, have lower levels of nutrients, and have a far longer residence time in the environment. Oil that becomes entrained in anaerobic sediments is also likely to have a long residence time, although it too will eventually be biodegraded. Thus, data that encompass everything from the ecosystem to the molecular level are needed for understanding the complicated process of petroleum biodegradation in marine environments.

02 PETROLEUM↗

Ion Clusters Reveal the Sources, Impacts, and Drivers of Freshwater Salinization

Population growth, land use change, climate change, and natural resource extraction are driving the salinization of freshwater resources worldwide. Reversing these trends will require data-centric approaches that identify salt sources, environmental drivers, and ecosystem responses. In this study, we applied principal component analysis and hierarchical clustering to identify ion covariance patterns, or “ion clusters,” in Broad Run, an urban stream in the Mid-Atlantic United States. These clusters correspond to distinct hydrologic regimes and reveal specific salinization risks: (1) phosphorus pollution mobilized during summer storms (Cluster 1); (2) elevated concentrations of sulfate and bicarbonate during baseflow (Cluster 2), likely reflecting groundwater discharge; and (3) elevated specific conductance and sodium, chloride, and potassium ion concentrations during snowmelt and rain-on-snow events (Cluster 3), driven by deicer and anti-icer wash-off. These ion fingerprints offer a transferable framework for diagnosing salt sources, assessing ecological risk, and identifying management targets. Our findings underscore the need for next-generation stormwater infrastructure and smart growth policies to protect aquatic life in rapidly urbanizing watersheds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantitative Evaluation of an Integrated System for Valorization of Wastewater Algae as Bio-oil, Fuel Gas, and Fertilizer Products

Algal systems have emerged as a promising strategy for simultaneous treatment and valorization of wastewater. However, further advancement and real-world implementation are hindered by the limited knowledge on the full energetic and nutrient product potentials of such systems and the corresponding value of these products. In this work, an aqueous-based system for the conversion of wastewater-derived algae and upgrading of crude products was designed and demonstrated. Bio-oil, fuel gas, and fertilizer products were generated from algal biomass harvested from a municipal wastewater treatment facility. Experiments showed that 68% of chemical energy contained in the algal biomass could be recovered with 44% in upgraded bio-oil and 23% in fuel gas (calculated as higher heating values), and 44% and 91% of nitrogen and phosphorus element contents in the original feedstock could be recovered as fertilizer products (ammonium sulfate and struvite), respectively. For 1,000 kg of such dry algal biomass, these products had an estimated total value of $427 (in 2014 U.S. dollars). For the first time, experiment-based energy and nutrient recovery potentials of wastewater-derived algae were presented in an integrated manner. Findings also revealed critical research needs and suggested strategies to further improve resource recovery and waste valorization in these systems.

09 BIOMASS FUELS↗

What Happens to LiMnPO 4 upon Chemical Delithiation?

Olivine MnPO 4 is the delithiated phase of the lithium-ion-battery cathode (positive electrode) material LiMnPO 4 , which is formed at the end of charge. This phase is metastable under ambient conditions and can only be produced by delithiation of LiMnPO 4 . We have revealed the manganese dissolution phenomenon during chemical delithiation of LiMnPO 4 , which causes amorphization of olivine MnPO 4 . The properties of crystalline MnPO 4 obtained from carbon-coated LiMnPO 4 and of the amorphous product resulting from delithiation of pure LiMnPO 4 were studied and compared. The phosphorus-rich amorphous phases in the latter are considered to be MnHP 2 O 7 and MnH 2 P 2 O 7 from NMR, X-ray absorption spectroscopy, and X-ray photoelectron spectroscopy analysis. The thermal stability of MnPO 4 is significantly higher under high vacuum than at ambient condition, which is shown to be related to surface water removal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of Substituents on the Electronic Structure of Mono- and Bis(phosphido) Thorium(IV) Complexes

Here, a series of metallocene thorium complexes with mono- and bis(phosphido) ligands have been investigated with varying hues: (C 5 Me 5 ) 2 Th(Cl)[P(Mes) 2 ] (Mes = mesityl = 2,4,6-(CH 3 ) 3 C 6 H 2 ; dark red-purple), (C 5 Me 5 ) 2 Th[P(Mes)(CH 3 )] 2 (dark red-purple), (C 5 Me 5 ) 2 Th(CH 3 )[P(Mes) 2 ] (dark red-purple), (C 5 Me 5 ) 2 Th(CH 3 )[P(Mes)(SiMe 3 )] (orange), (C 5 Me 5 ) 2 Th(Cl)[P(Mes)(SiMe 3 )] (orange), (C 5 Me 5 ) 2 Th[P(Mes)(SiMe 3 )] 2 (orange), and (C 5 Me 5 ) 2 Th[PH(Mes)] 2 (pale yellow). While all of these complexes bear a mesityl group on phosphorus, the electronic structure observed differs depending on the other substituent (mesityl, methyl, trimethylsilyl, or hydrogen). This sparked an investigation of the electronic structure of these complexes using 31 P NMR and electronic absorption spectroscopy in concert with time-dependent density functional theory calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal–Ligand Cooperativity Promoting Sulfur Atom Transfer in Ferrous Complexes and Isolation of a Sulfurmethylenephosphorane Adduct

Here, the reaction of elemental sulfur with the cis-divacant octahedral complex [(pyrr 2 py)Fe(OEt 2 )] (1; pyrr 2 py 2– = 3,5- t Bu 2 -bis(pyrrolyl)pyridine) yields the iron dimer [(pyrr-1-S-pyrrpy)Fe] 2 (2; pyrr-1-S-pyrrpy 2– = 3,5-( t Bu2-pyrrolyl)(1-S-3,5-tBu2-pyrrolyl)pyridine) resulting from a pyrr 2 py 2– ligand based S-oxidation of one pyrrole arm. Addition of the phosphorus ylide H 2 CPPh 3 to 1 forms the ylide adduct [(pyrr 2 py)Fe(CH 2 PPh 3 )] (3), which upon reaction with elemental sulfur produces a rare example of a sulfurmethylenephosphorane adduct, [(pyrr 2 py)Fe(SCH 2 PPh 3 )] (4). The sulfur-oxidized pyrrole group of the ligand pyrr-1-S-pyrrpy 2– can be reversed, since complex 2 exhibits S atom transferability via the addition of 2 equiv of H 2 CPPh 3 to yield a mixture of compounds 3 and 4. For all complexes reported, the ferrous ion remains S = 2. Complexes 2–4 were characterized by single-crystal X-ray diffraction as well as 1 H NMR spectroscopy, solid and solution magnetic studies, and 57 Fe Mössbauer spectroscopic measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Size-Driven Stability of Lanthanide Thiophosphates Grown from an Iodide Flux

To determine the influence of the lanthanide size on the structures and properties of thiophosphates, a thiophosphate series containing different lanthanides was synthesized via high temperature flux crystal growth and their structures and physical properties analyzed and compared. Layered thiohypophosphates NaLnP 2 S 6 (Ln = La, Ce, Pr) and thiopyrophosphates CsLnP 2 S 7 (Ln = Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Yb, Y) were grown out of an iodide flux using consistent reaction conditions across both series. Under the mildly reducing iodide flux reaction conditions, a rather rare example of phosphorus reduction from the +5 to the +4 oxidation state was observed. Both resultant structure types are based on lanthanide thiophosphate sheets with the alkali cations located between them. Magnetic susceptibility measurements were conducted and revealed Curie–Weiss behavior of the samples, with a Van Vleck contribution in the CsSmP 2 S 7 sample. UV–vis data was found to be in good agreement with the literature, indicating little influence of the sulfide environment on the localized 4f orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chelating Borohydrides for Lanthanides and Actinides: Structures, Mechanochemistry, and Case Studies with Phosphinodiboranates

In this Forum Article, we review the development of chelating borohydride ligands called aminodiboranates (H 3 BNR 2 BH 3 – ) and phosphinodiboranates (H 3 BPR 2 BH 3 – ) for the synthesis of trivalent f-element complexes. The advantages and history of using mechanochemistry to prepare molecular borohydride complexes are described along with new results demonstrating the mechanochemical synthesis of M 2 (H 3 BP t Bu 2 BH 3 ) 6 , where M = U, Nd, Tb, Er, and Lu (1–5). Multinuclear NMR, IR, and single-crystal X-ray diffraction data are reported for 1–5 alongside complementary density functional theory calculations to reveal differences in their structure and reactivity with and without tetrahydrofuran. The results demonstrate how mechanochemistry can be used to access f-element complexes with chelating borohydrides in improved and reproducible yields, which is an important step toward investigating the properties of lanthanide and actinide phosphinodiboranate complexes with different phosphorus substituents. Furthermore, the relevance of these results is contextualized by a discussion of structural factors known to influence the volatility of f-element borohydrides and applications that require the development of volatile f-element complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Effect of Core-Hole Shape on Attosecond Valence Electron Dynamics

Rapid X-ray ionization of a core electron is known to induce the attosecond motion of valence electrons; however, the effect of core-hole shape on the triggered dynamics remains relatively unknown. In this work, the sub-four fs response of prototypical functionalized/heterocyclic/polycyclic molecules was simulated using real-time time-dependent density functional theory (RT-TDDFT), a sudden approximation core-hole, and phenomenologically Auger–Meitner (AM) decay. These molecules included fluorobenzene, chlorobenzene, bromobenzene, phenol, thiophenol, pyridine, phosphorus, and azulene. It is observed that the valence electron dynamics are essentially independent of the core-hole created, provided that it is ionized from an inner-shell orbital and not an inner-valence orbital. This has broad implications for free-electron laser studies of X-ray pumped attosecond processes since the flexibility in edge allows for a wide range of experimental modalities, core-holes with longer AM lifetimes, and molecular targets.

aromatic compounds↗

Quantifying the Variation in the Number of Donors in Quantum Dots Created Using Atomic Precision Advanced Manufacturing

Atomic-precision advanced manufacturing enables unique silicon quantum electronics built on quantum dots fabricated from small numbers of phosphorus dopants. The number of dopant atoms comprising a dot plays a central role in determining the behavior of charge and spin confined to the dots and thus overall device performance. Here in this work, we use both theoretical and experimental techniques to explore the combined impact of lithographic variation and stochastic kinetics on the number of P incorporations in quantum dots made using these techniques and how this variation changes as a function of the size of the dot. Using a kinetic model of PH3 dissociation augmented with novel reaction barriers, we demonstrate that for a 2 × 3 silicon dimer window the probability that no donor incorporates goes to zero, allowing for certainty in the placement of at least one donor. However, this still comes with some uncertainty in the precise number of incorporated donors (either one or two), and this variability may still impact certain applications. We also examine the impact of the size of the initial lithographic window, finding that the incorporation fraction saturates to δ-layer-like coverage as the circumference-to-area ratio decreases. We predict that this incorporation fraction depends strongly on the dosage of the precursor and that the standard deviation of the number of incorporations scales as ~√n, as would be expected for a sequence of largely independent incorporation events. Finally, we characterize an array of 36 experimentally prepared multidonor 3 × 3 nm lithographic windows with scanning tunneling microscopy, measuring the fidelity of the lithography to the desired array and the final location of PH x fragments within these lithographic windows. We use our kinetic model to examine the expected variability due to the observed lithographic error, predicting a negligible impact on incorporation statistics. We find good agreement between our model and the inferred incorporation locations in these windows from scanning tunneling microscope measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Periodic Trends from Metal Substitution in Bimetallic Mo-Based Phosphides for Hydrodeoxygenation and Hydrogenation Reactions

Bimetallic phosphides are promising materials for biomass valorization, yet many metal combinations are understudied as catalysts and require further analysis to realize their superior properties. Herein, we provide the synthesis, characterization, and catalytic performance of a variety of period 4 and 5 solid solutions of molybdenum-based bimetallic phosphides (MMoP, M = Fe, Co, Ni, Ru). From the results, the charge sharing between the metals and phosphorus control the relative oxidation of Mo and reduction of P in the lattice, which were both indirectly observed in binding energy shifts in X-ray photoelectron spectroscopy (XPS) and absorption energy shifts in X-ray absorption near-edge spectroscopy (XANES). For MMoP (M = Fe, Co, Ni), the more oxidized the Mo in the bimetallic phosphide, the higher the selectivity to benzene from phenol via direct deoxygenation at 400 °C and 750 psig. This phenomenon was observed in the bimetallic materials synthesized across period 4, where aromatic selectivity and degree of Mo oxidation both decreased in the following order FeMoP >> CoMoP > NiMoP. Alternatively, in the case of MMoP (M = Fe, Ru), the P in RuMoP is more oxidized compared to that in FeMoP, and the selectivity toward the hydrogenation pathway increased due to the interaction between the aromatic rings and the P species on the surface. For RuMoP and NiMoP, cyclohexanol was selectively produced from phenol with >99% selectivity when the reaction temperature was lowered to 125 °C at 750 psig, whereas FeMoP and CoMoP were not active under these conditions. Last, complete deoxygenation of phenol to benzene, cyclohexane, and cyclohexene was accomplished using mixtures of RuMoP and FeMoP in flow and batch experiments. Furthermore, these results highlight the versatility and wide applicability of transition metal phosphides for biomass conversions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transient Mesoscopic Immiscibility, Viscosity Anomaly, and High Internal Pressure at the Semiconductor–Metal Transition in Liquid Ga 2 Te 3

Gallium tellurides appear to be promising phase-change materials (PCMs) of the next generation for brain-inspired computing and reconfigurable optical metasurfaces. They are different from the benchmark PCMs because of sp 3 gallium hybridization in both cubic Ga 2 Te 3 and amorphous pulsed laser deposition (PLD) films. Liquid Ga 2 Te 3 also shows a viscosity η(T) anomaly just above melting when η(T) first increases and only then starts decreasing. We used high-energy X-ray diffraction to observe a transient mesoscopic immiscibility that suggested dense metallic liquid droplets in a semiconducting melt. The η(T) shape was consistent with this finding. A vanishing first sharp diffraction peak that also shifts to a higher Q indicates a high internal pressure in the metallic melt, which produces a remarkable asymmetry of the Ga–Te nearest neighbor distances and is reminiscent of high-pressure rhombohedral Ga 2 Te 3 . Finally, the observed phenomena provide a realistic scenario for a fast, multilevel SET–RESET response, which also unravels similar trends in the purported density-driven liquid polyamorphism of water, phosphorus, sulfur, and other materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anisotropic ripple deformation in phosphorene

Here, two-dimensional materials tend to become crumpled according to the Mermin-Wagner theorem, and the resulting ripple deformation may significantly influence electronic properties as observed in graphene and MoS 2 . Here, we unveil by first-principles calculations a new, highly anisotropic ripple pattern in phosphorene, a monolayer black phosphorus, where compression-induced ripple deformation occurs only along the zigzag direction in the strain range up to 10%, but not the armchair direction. This direction-selective ripple deformation mode in phosphorene stems from its puckered structure with coupled hinge-like bonding configurations and the resulting anisotropic Poisson ratio. We also construct an analytical model using classical elasticity theory for ripple deformation in phosphorene under arbitrary strain. The present results offer new insights into the mechanisms governing the structural and electronic properties of phosphorene crucial to its device applications.

36 MATERIALS SCIENCE↗