Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ozone”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Homogenizing and Estimating the Uncertainty in NOAA's Long-Term Vertical Ozone Profile Records Measured with the Electrochemical Concentration Cell Ozonesonde

NOAA's program of long-term monitoring of the vertical distribution of ozone with electrochemical concentration cell (ECC) ozonesondes has undergone a number of changes over the 50-year record. In order to produce a homogenous data set, these changes must be documented and, where necessary, appropriate corrections applied. This is the first comprehensive and consistent reprocessing of NOAA's ozonesonde data records that corrects for these changes using the rawest form of the data (cell current and pump temperature) in native resolution as well as a point-by-point uncertainty calculation that is unique to each sounding. The reprocessing is carried out uniformly at all eight ozonesonde sites in NOAA's network with differences in sensing solution and ozonesonde types accounted for in the same way at all sites. The corrections used to homogenize the NOAA ozonesonde data records greatly improve the ozonesonde measurements with an average one sigma uncertainty of +/- 4-6% in the stratosphere and +/- 5-20% in the troposphere. A comparison of the integrated column ozone from the ozonesonde profile with co-located Dobson spectrophotometers total column ozone measurements shows agreement within +/- 5% for >70% of the profiles. Very good agreement is also found in the stratosphere between ozonesonde profiles and profiles retrieved from the Solar Backscatter Ultraviolet (SBUV) instruments.

ozonesonde↗

Emissions Relationships Among Western Forest Fire Plumes: II. Plume Typing for Sources of Ozone and Aerosol Absorption

Previous studies of emission factors from biomass burning are prone to largeerrors since they ignore the interplay of mixing and varying pre-fire backgroundCO2 levels. Such complications severely affected our studies of 446 forest fireplume samples measured in the Western US by the science teams of NASAs SEAC4RS and ARCTAS airborne missions. Consequently we propose a MixedEffects Regression Emission Technique (MERET) to check techniques like theNormalized Emission Ratio Method (NERM), where use of sequentialobservations cannot disentangle emissions and mixing. We also evaluate asimpler consensus technique. All techniques relate emissions to fuel burnedusing Cburn Ctot added to the fire plume, where Ctot (CO2 + CO). Mixed-effectsregression can estimate pre-fire background values of Ctot (indexed byobservation j) simultaneously with emissions factors indexed by individualspecies i, xi (Cburn )i,j., MERET and consensus require more than twoemissions indicators. Our studies excluded samples where exogenous CO orCH4 might have been fed into a fire plume, mimicking emission.We sought to let the data on 13 gases and particulate properties suggest clustersof variables and plume types, using non-negative matrix factorization (NMF).While samples were mixtures, the NMF unmixing suggested purer burn types.Particulate properties (bscat, babs, SSA, AE) and gas-phase emissions were interrelated.Finally, we sought a simple categorization useful for modeling ozone productionin plumes. Two kinds of fires produced high ozone: those with large fuel nitrogenas evidenced by remnant CH3CN in the plumes, and also those from veryintense large burns. Fire types with optimal ratios of delta-NOydelta-HCHO associate with the highest additional ozone per unit Cburn, Perhaps theseplumes exhibit limited NOx binding to reactive organics. Perhaps these plumesexhibit limited NOx binding to reactive organics.

ozone↗

Stratospheric Aerosol and Gas Experiment III on the International Space Station (SAGE III/ISS) Validation of Three Years of Ozone and Water Vapor Data

The Stratospheric Aerosol and Gas Experiment III (SAGE III) instrument installed on the International Space Station (ISS) has completed three years of data collection and production of science data products. The SAGE III/ISS is a solar and lunar occultation instrument that scans the light from the Sun and Moon through the limb of the Earth’s atmosphere to produce vertical profiles of aerosol, ozone, water vapor, and other trace gases. It continues the legacy of previous SAGE instruments dating back to the 1970s to provide data continuity of stratospheric constituents critical for assessing trends in the ozone layer. This presentation shows the validation results of comparing SAGE III/ISS ozone and water vapor vertical profiles with those of in situ and satellite data.

stratospheric ozone↗

Stratospheric Aerosol and Gas Experiment III on the International Space Station(SAGE III/ISS) Validation of Three Years of Ozone and Water Vapor Data

The Stratospheric Aerosol and Gas Experiment III (SAGE III) instrument installed on the International Space Station (ISS) has completed three years of data collection and production of science data products. The SAGE III/ISS is a solar and lunar occultation instrument that scans the light from the Sun and Moon through the limb of the Earth’s atmosphere to produce vertical profiles of aerosol, ozone, water vapor, and other trace gases. It continues the legacy of previous SAGE instruments dating back to the 1970s to provide data continuity of stratospheric constituents critical for assessing trends in the ozone layer. This presentation shows the validation results of comparing SAGE III/ISS ozone and water vapor vertical profiles with those of in situ and satellite data.

SAGE III ISS ozone water vapor validation↗

Intercomparison of the representations of the atmospheric chemistry of pre-industrial methane and ozone in earth system and other global chemistry-transport models

An intercomparison has been set up to study the representation of the atmospheric chemistry of the pre-industrial troposphere in earth system and other global tropospheric chemistry-transport models. The intercomparison employed a constrained box model and utilised tropospheric trace gas composition data for the pre-industrial times at ninety mid-latitude surface locations. Incremental additions of four organic compounds: methane, ethane, acetone and propane, were used to perturb the constrained box model and generate responses in hydroxyl radicals and tropospheric ozone at each location and with each chemical mechanism. Although the responses agreed well across the chemical mechanisms from the selected earth system and other global tropospheric chemistry-transport models, there were differences in the detailed responses between the chemical mechanisms that could be tracked down by sensitivity analysis to differences in the representation of C1–C3 chemistry. Inter-mechanism ranges in NOx compensation points were about 0.17 ± 0.12 when expressed relative to the inter-mechanism average. Monte Carlo uncertainty analysis carried out with a single chemical mechanism put the intra-mechanism range a factor of three higher at 0.50 ± 0.12. Similar differences between inter-mechanism and intra-mechanism ranges were found for hydroxyl radical depletion but were up to a factor of six wider for ozone formation from incremental additions of organic compounds. The cause of the discrepancies between the inter- and intra-mechanism ranges was found to be the large uncertainties that are present in the laboratory determinations of the rate coefficients and product channel branching ratios of some key chemical reactions involving organic peroxy radicals and hydroperoxides. Whilst these large uncertainties are present in the laboratory determinations, there will be irreducible uncertainties in the predictions from the earth system and other chemistry-transport models of methane and tropospheric ozone trends since pre-industrial times and hence their contributions to the radiative forcing of climate change. Further definitive laboratory studies of the reaction rates and product yields of the reactions of the simple organic peroxy radicals and hydroperoxides are required to resolve and reduce current uncertainties in earth system and chemistry-transport model predictions.

atmospheric chemistry↗

Stratospheric Aerosol and Gas Experiment III on the International Space Station (SAGE III/ISS) Newly Released V5.2 Validation of Ozone and Water Vapor Data

The Stratospheric Aerosol and Gas Experiment III (SAGE III) instrument installed on the International Space Station (ISS) has completed over three and a half years of data collection and production of science data products. The SAGE III/ISS is a solar and lunar occultation instrument that scans the light from the Sun and Moon through the limb of the Earth’s atmosphere to produce vertical profiles of aerosol, ozone, water vapor, and other trace gases. It continues the legacy of previous SAGE instruments dating back to the 1970s to provide data continuity of stratospheric constituents critical for assessing trends in the ozone layer. This presentation shows the validation results of comparing SAGE III/ISS ozone and water vapor vertical profiles from the newly released v5.2 science product with those of in situ and satellite data .

stratospheric↗

Stratospheric Aerosol and Gas Experiment III on the International Space Station (SAGE III/ISS) Validation of Ozone and Water Vapor Data

The Stratospheric Aerosol and Gas Experiment III (SAGE III) instrument installed on the International Space Station (ISS) has completed four years of data collection and production of science data products. The SAGE III/ISS is a solar and lunar occultation instrument that scans the light from the Sun and Moon through the limb of the Earth’s atmosphere to produce vertical profiles of aerosol, ozone, water vapor, and other trace gases. It continues the legacy of previous SAGE instruments dating back to the 1970s to provide data continuity of stratospheric constituents critical for assessing trends in the ozone layer. Recently, the latest version 5.2 data product has been released to the public. This presentation shows the validation results of comparing v5.2 SAGE III/ISS ozone and water vapor vertical profiles with those of in situ and satellite data.

SAGE Stratosphere Stratospheric Mesospheric Ozone ↗

NASA Satellite Measurements Show Global-scale Reductions in Free Tropospheric Ozone in 2020 and Again in 2021 During COVID-19

NASA satellite measurements show that ozone reductions throughout the Northern Hemisphere (NH) free troposphere reported for spring-summer 2020 during the Corona VIrus Disease 2019 (COVID-19) pandemic have occurred again in spring-summer 2021. The satellite measurements show that tropospheric column ozone (TCO) (mostly representative of the free troposphere) for 20oN-60oN during spring-summer for both 2020 and 2021 averaged ~3 Dobson Units (DU) (or ~7-8%) below normal. These ozone reductions in 2020 and 2021 were the lowest in the 2005- 2021 record. We also include satellite measurements of tropospheric NO2that exhibit reductions of ~10-20% in the NH in early spring-to-summer 2020 and 2021, suggesting that reduced pollution was the main cause for the low anomalies in NH TCO in 2020 and 2021. Reductions of TCO ~2DU (7 %) are also measured in the Southern Hemisphere in austral summer but are 26not associated with reduced NO2.

Tropospheric Ozone↗

Improved Assessment of Recent Trends in NOx and VOC Emissions and Ozone Production Sensitivity Regimes Using Satellite Data

This presentation highlights results from a NASA Aura Science Team and Atmospheric Composition Modeling and Analysis Program (ACMAP) project which study the capability to observe and model trends in ozone (O3) production regimes using spaceborne sensors. Ultraviolet– visible (UV–Vis) tropospheric column satellite retrievals of formaldehyde (HCHO) (a proxy for volatile organic compound [VOC] reactivity) and nitrogen dioxide (NO2) (a proxy for nitrogen oxides [NOx]) are frequently used to investigate the sensitivity of O3 production to emissions of NOx and VOCs. There are challenges that come from using satellite-derived ratios of HCHO and NO2 (FNR) to study O3 production sensitivity with the largest uncertainties associated with specific spaceborne sensor’s retrieval biases and errors. This study quantifies the differences and improvements in satellite retrievals of O3 production sensitivity regimes using FNRs when moving from legacy polar orbiting satellites such as the Ozone Monitoring Instrument (OMI) onboard NASA’s Aura satellite and Ozone Mapping and Profiler Suite Nadir Mapper (OMPS-NM) onboard the NASA/NOAA Suomi-NPP platform to newer, higher spatiotemporal resolution satellite sensors TROPOspheric Monitoring Instrument (TROPOMI) and eventually the recently launched NASA geostationary sensor Tropospheric Emissions: Monitoring of Pollution (TEMPO). Furthermore, we investigate how using retrievals of NO2 and HCHO from these different satellites to constrain model predictions impacts the ability to accurately simulate O3 chemistry including chemical production regimes. To this end, we have conducted inverse model simulations, using the WRF-CMAQ-DDM data assimilation system at 12 km × 12 km, to constrain emissions of NOx and VOCs over the contiguous United States (CONUS) when assimilating OMI and TROPOMI retrievals of NO2 and HCHO. Two advantages of this are that we a) account for each satellite’s errors/biases in the emission estimation and b) update the prior profile to ensure that only radiance information is used for optimizing the emissions. This presentation will demonstrate: a) the varying accuracy of different satellite retrieved FNRs and ability to capture known sub-annual emission trends (e.g., seasonal, weekend/weekday) and emission anomalies during the COVID-19 lockdown of 2020, b) the differences and improvements in top-down emission estimates of NOx and VOCs when constrained by newer satellite sensors compared to legacy systems, and c) multi-sensor optimized emission estimates of summer-time NOx and VOCs between 2019-2021.

Data↗

Observations of the Temperature Dependent Response of Ozone to NOx Reductions in an Urban Plume

Observations of NO{sub x} in the Sacramento, CA region show that mixing ratios decreased by 30% between 2001 and 2008. Here we use an observation-based method to quantify net ozone production rates in the outflow from the Sacramento metropolitan region and examine the O{sub 3} decrease resulting from reductions in NO{sub x} emissions. This observational method does not rely on assumptions about detailed chemistry of ozone production, rather it is an independent means to verify and test these assumptions. We use an instantaneous steady-state model as well as a detailed 1-D plume model to aid in interpretation of the ozone production inferred from observations. In agreement with the models, the observations show that early in the plume, the NO{sub x} dependence for O{sub x} (O{sub x} = O{sub 3}+NO{sub 2}) production is strongly coupled with temperature, suggesting that temperature dependent biogenic VOC emissions can drive O{sub x} production between NO{sub x}-limited and NO{sub x}-suppressed regimes. As a result, NO{sub x} reductions were found to be most effective at higher temperatures over the 7 year period. We show that violations of the California 1-hour O{sub 3} standard (90 ppb) in the region have been decreasing linearly with decreases in NO{sub x} (at a given temperature) and predict that reductions of NO{sub x} concentrations (and presumably emissions) by an additional 30% (relative to 2007 levels) will eliminate violations of the state 1 hour standard in the region. If current trends continue, a 30% decrease in NO{sub x} is expected by 2012, and an end to violations of the 1 hour standard in the Sacramento region appears to be imminent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of the Advanced T-OZON{sub TM} for PWR Decommissioning - 16062

T-OZON{sub TM} is the chemical decontamination method developed by Toshiba for the decontamination of BWR system piping. To apply T-OZON{sub TM} to PWR decommissioning, the decontamination application conditions have been optimized on actual PWR plant samples and ozone concentration behavior in the water have been studied. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Attribution of observed sea level pressure trends to greenhouse gas, aerosol, and ozone changes

Human influence on atmospheric sea level pressure (SLP) has previously been detected globally, but the contributions of greenhouse gas, aerosol, and ozone changes to the observed trends have not been separately identified. We use simulations from eight climate models to show that greenhouse gas, aerosol, and ozone changes each drive distinct seasonal and geographical patterns of trends, which are separately detectable in observed seasonal SLP trends over the 1951–2011 period. This detection is driven by significant low-latitude SLP responses to greenhouse gas, aerosol, and ozone changes, as well as the more frequently-studied high latitude responses. These results aid in understanding past atmospheric circulation changes, and have potential to improve projections of future circulation changes.

54 ENVIRONMENTAL SCIENCES↗

Influence of ozone addition on the low-temperature oxidation of dimethyl ether in a jet-stirred reactor

The influence of ozone addition on the low-temperature oxidation of dimethyl ether (DME) was investigated experimentally in an atmospheric-pressure jet-stirred reactor, over the temperature range of 400–800 K. Detailed speciation information was obtained by employing synchrotron vacuum ultraviolet photoionization mass spectrometry. Experimental results revealed that the ozone addition had a positive influence on the production of the highly reactive intermediates. Moreover, the low-temperature reactivity of DME was significantly enhanced, which resulted in the broadening of the temperature window of fuel consumption and intermediates formation at lower temperatures. Therefore, novel experimental data of the low temperature regime (400–500 K) could be obtained. The data set of this special temperature regime yielded insights into the DME low-temperature kinetics, which were further supported with modeling analysis based on two existing DME models (Metcalfe et al., 2013; Wang et al., 2015) combined with an ozone sub-mechanism (Zhao et al., 2016). The analysis showed that temperature-sensitive reactions such as the second oxygen channel could be nearly “frozen” at this low temperature (T < 440 K). Furthermore, the production of some intermediates was found to be strongly governed by reaction pairs, such as CH 3 OCH 2 + O 2 = CH 3 OCH 2 O 2 and CH 3 OCH 2 + O 2 = 2 CH 2 O + OH for the CH 2 O formation. This finding could be useful for examining branching ratios in both models, and the analysis suggested the further modification of the branching ratios for the oxygen addition to CH 3 OCH 2 O 2 pathways and the CH 3 OCH 2 O 2 self-reactions were required. Finally, the influences of the O 3 addition in the sensitive reactions of the fuel initial low-temperature oxidation were investigated in this work. It was interesting to note that O 3 addition could change the dominating reactions in the initial low-temperature oxidation, by the addition of some O 3 -related pathways with relatively high sensitivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stress axis variability is associated with differential ozone-induced lung inflammatory signaling and injury biomarker response

Highlights: • Fischer and Lewis rats exhibited distinct stress axis responses to ozone inhalation. • Hypo-stress responsive Lewis rats had a greater lung inflammatory response. • Hyper-stress responsive Fischer rats had a greater lung injury response. • Innate stress axis differences may play a role in ozone-induced lung toxicity. Ozone (O{sub 3}), a ubiquitous urban air pollutant, causes adverse pulmonary and extrapulmonary effects. A large variability in acute O{sub 3}-induced effects has been observed; however, the basis for interindividual differences in susceptibility is unclear. We previously demonstrated a role for the hypothalamic-pituitary-adrenal (HPA) stress axis and glucocorticoid response in acute O{sub 3} toxicity. Glucocorticoids have important anti-inflammatory actions, and have been shown to regulate lung inflammatory responses. We hypothesised that a hyporesponsive HPA axis would be associated with greater O{sub 3}-dependent lung inflammatory signaling. Two genetically-related rat strains with known differences in stress axis reactivity, highly-stress responsive Fischer (F344) and less responsive Lewis (LEW), were exposed for 4 h by nose-only inhalation to clean air or 0.8 ppm O{sub 3}, and euthanized immediately after exposure. As expected, baseline (air-exposed) plasma corticosterone was significantly lower in the hypo-stress responsive LEW. Although O{sub 3} exposure increased plasma corticosterone in both strains, corticosterone remained significantly lower in LEW when compared to F334. LEW exhibited greater O{sub 3}-induced inflammatory cytokine/chemokine signaling compared to F344, consistent with the lower corticosterone levels. Since we observed strain-specific differences in inflammatory signaling, we further investigated injury biomarkers (total protein, albumin and lactate dehydrogenase). Although the hyper-responsive F344 exhibited lower inflammatory signaling in response to O{sub 3} compared with LEW, they had greater levels of lung injury biomarkers. Our results indicate that stress axis variability is associated with differential O{sub 3}-induced lung toxicity. Given the large variability in stress axis reactivity among humans, stress axis regulation could potentially be a determining factor underlying O{sub 3} sensitivity.

54 ENVIRONMENTAL SCIENCES↗

Multiphase Mechanism for the Production of Sulfuric Acid from SO 2 by Criegee Intermediates Formed During the Heterogeneous Reaction of Ozone with Squalene

Here we report a new multiphase reaction mechanism by which Criegee intermediates (CIs), formed by ozone reactions at an alkene surface, convert SO 2 to SO 3 to produce sulfuric acid, a precursor for new particle formation (NPF). During the heterogeneous ozone reaction, in the presence of 220 ppb SO 2 , an unsaturated aerosol (squalene) undergoes rapid chemical erosion, which is accompanied by NPF. A kinetic model predicts that the mechanism for chemical erosion and NPF originate from a common elementary step (CI + SO 2 ) that produces both gas phase SO 3 and small ketones. At low relative humidity (RH = 5%), 20% of the aerosol mass is lost, with 17% of the ozone-surface reactions producing SO 3 . At RH = 60%, the aerosol shrinks by 30%, and the yield of SO 3 is <5%. In conclusion, this multiphase formation mechanism of H 2 SO 4 by CIs is discussed in the context of indoor air quality and atmospheric chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Deep Learning Parameterization for Ozone Dry Deposition Velocities

Abstract The loss of ozone to terrestrial and aquatic systems, known as dry deposition, is a highly uncertain process governed by turbulent transport, interfacial chemistry, and plant physiology. We demonstrate the value of using Deep Neural Networks (DNN) in predicting ozone dry deposition velocities. We find that a feedforward DNN trained on observations from a coniferous forest site (Hyytiälä, Finland) can predict hourly ozone dry deposition velocities at a mixed forest site (Harvard Forest, Massachusetts) more accurately than modern theoretical models, with a reduction in the normalized mean bias (0.05 versus ~0.1). The same DNN model, when driven by assimilated meteorology at 2° × 2.5° spatial resolution, outperforms the Wesely scheme as implemented in the GEOS‐Chem model. With more available training data from other climate and ecological zones, this methodology could yield a generalizable DNN suitable for global models.

Silva, S. J.↗

Efficient facemask decontamination via forced ozone convection

The COVID-19 crisis has taken a significant toll on human life and the global economy since its start in early 2020. Healthcare professionals have been particularly vulnerable because of the unprecedented shortage of Facepiece Respirators (FPRs), which act as fundamental tools to protect the medical staff treating the coronavirus patients. In addition, many FPRs are designed to be disposable single-use devices, creating an issue related to the generation of large quantities of non-biodegradable waste. In this contribution, we describe a plasma-based decontamination technique designed to circumvent the shortages of FPRs and alleviate the environmental problems posed by waste generation. The system utilizes a Dielectric Barrier Discharge (DBD) to generate ozone and feed it through the fibers of the FPRs. The flow-through configuration is different than canonical ozone-based sterilization methods, in which the equipment is placed in a sealed ozone-containing enclosure without any flow through the mask polymer fibers. We demonstrate the rapid decontamination of surgical masks using Escherichia coli ( E. coli ) and Vesicular Stomatitis Virus (VSV) as model pathogens, with the flow-through configuration providing a drastic reduction in sterilization time compared to the canonical approach. We also demonstrate that there is no deterioration in mask structure or filtration efficiency resulting from sterilization. Finally, we show that this decontamination approach can be implemented using readily available tools, such as a plastic box, a glass tube, few 3D printed components, and the high-voltage power supply from a plasma globe toy. The prototype assembled for this study is portable and affordable, with effectiveness comparable to that of larger and more expensive equipment.

36 MATERIALS SCIENCE↗

The role of the droplet interface in controlling the multiphase oxidation of thiosulfate by ozone

Predicting reaction kinetics in aqueous microdroplets, including aerosols and cloud droplets, is challenging due to the probability that the underlying reaction mechanism can occur both at the surface and in the interior of the droplet. Additionally, few studies directly measure the surface activities of doubly charged anions, despite their prevalence in the atmosphere. Here, deep-UV second harmonic generation spectroscopy is used to probe surface affinities of the doubly charged anions thiosulfate, sulfate, and sulfite, key species in the thiosulfate ozonation reaction mechanism. Thiosulfate has an appreciable surface affinity with a measured Gibbs free energy of adsorption of -7.3 ± 2.5 kJ mol -1 in neutral solution, while sulfate and sulfite exhibit negligible surface propensity. The Gibbs free energy is combined with data from liquid flat jet ambient pressure X-ray photoelectron spectroscopy to constrain the concentration of thiosulfate at the surface in our model. Stochastic kinetic simulations leveraging these novel measurements show that the primary reaction between thiosulfate and ozone occurs at the interface and in the bulk, with the contribution of the interface decreasing from ~65% at pH 5 to ~45% at pH 13. Additionally, sulfate, the major product of thiosulfate ozonation and an important species in atmospheric processes, can be produced by two different pathways at pH 5, one with a contribution from the interface of >70% and the other occurring predominantly in the bulk (>98%). The observations in this work have implications for mining wastewater remediation, atmospheric chemistry, and understanding other complex reaction mechanisms in multiphase environments. Future interfacial or microdroplet/aerosol chemistry studies should carefully consider the role of both surface and bulk chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗