Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “METALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Single-Doped and Multidoped Transition-Metal (Mn, Fe, Co, and Ni) ZnO and Their Electrocatalytic Activities for Oxygen Reduction Reaction

The electrochemical oxygen reduction reaction (ORR) is the limiting half-reaction of fuel cells, which is mediated by using platinum-based catalysts. Hence, the development of low-cost, active ORR catalysts is highly required to make fuel cell technology commercially available. In this report, transition-metal (TM; Mn, Fe, Co, and Ni) single-doped and multidoped (MD) ZnO nanocrystals (ZNs) were prepared for use as ORR catalysts using a simple precipitation method. The effects of single doping and multidoping on the structure, morphology, and properties of the TM-doped ZNs were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray fluorescence, X-ray photoelectron microscopy, electron paramagnetic resonance, and Raman and photoluminescence (PL) spectroscopies. The XRD results reveal that synthesized ZnO samples retained a pure hexagonal wurtzite crystal structure, even at high levels of multidoping (nominal 20%). SEM analyses show that the morphology of the prepared ZNs varies with the doping elements, doping mode, and amounts of doping. The observation of peak shifting and peak intensity changes in Raman studies confirms the presence of dopants in ZnO. The PL investigation reveals that the incorporation of dopants into the ZnO structure increases the oxygen vacancies within the materials. The highest oxygen vacancies were present in Mn-doped ZnO and 15% MD ZnO among the single-doped and MD samples, respectively. Linear-sweep voltammetry studies conclude that doped ZnO shows enhanced ORR activity compared to the undoped samples. The Mn-doped ZnO and 15% MD ZnO exhibited the highest ORR activity among the prepared single-doped and MD ZN samples, respectively. In comparison, single doping showed better ORR activity than the multidoping system. The enhanced ORR activity of the synthesized ZN materials correlates with the amount of oxygen vacancies present in the samples. Finally, the enhanced activity of TM-doped ZnO suggests that these materials can be used as potential, low-cost electrocatalysts for ORR in fuel cell technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal–Organic Framework-derived Atomic Metal Sites Promoting Sulfur Cathode for All-Solid-State Lithium–Sulfur Batteries

All-solid-state lithium–sulfur batteries (ASSLSBs) offer high energy density and intrinsic safety; however, they still face major challenges, including sluggish redox kinetics and poor sulfur utilization. Incorporating conductive materials into sulfur cathodes is an effective strategy to mitigate these limitations. Here, a highly conductive cobalt–nitrogen–doped carbon (Co–NC) derived from a metal–organic framework (MOF) is introduced to accelerate charge transfer and promote reversible sulfur conversion. Co−NC provides atomically dispersed Co–N sites and conductive carbon pathways that correlate with improved charge transfer, sulfur utilization, and rate capability. Co–NC@S cathode delivers 1499 mAh g–1 at C/20 with a high sulfur loading (5 mg cm–2) and retains 1292 mAh g–1 after five cycles (vs 443 mAh g–1 without Co–NC). Moreover, Co–NC derived ASSLSB achieves 903 mAh g–1 at 5C at 60 °C. This work provides a practical and effective approach to develop high energy, high-rate ASSLSBs.

25 ENERGY STORAGE↗

Molecular Rhodium Complexes Supported on the Metal-Oxide-Like Nodes of Metal Organic Frameworks and on Zeolite HY: Catalysts for Ethylene Hydrogenation and Dimerization

Metal–organic frameworks (MOFs) with nodes consisting of zirconium oxide clusters (Zr 6 ) offer new opportunities as supports for catalysts with well-defined, essentially molecular, structures. We used the precursor Rh(C 2 H 4 ) 2 (acac) (acac is acetylacetonate) to anchor Rh(I) complexes to the nodes of the MOF UiO-67 and, for comparison, to the zeolite dealuminated HY (DAY). These were characterized experimentally by measurement of catalytic activities and selectivities for ethylene hydrogenation and dimerization in a once-through flow reactor at 298 K and 1 bar. The catalyst performance data are complemented with structural information determined by infrared and extended X-ray absorption fine structure spectroscopies and by calculations at the level of density functional theory, the latter carried out also to extend the investigation to a related MOF, NU-1000. The agreement between the experimental and calculated structural metrics is good, and the calculations have led to predictions of reaction mechanisms and associated energetics. Finally, the data demonstrate a correlation between the catalytic activity and selectivity and the electron-donor tendency of the supported rhodium (as measured by the frequencies of CO ligands bonded as probes to the Rh(I) centers), which is itself a measure of the electron-donor tendency of the support.

36 MATERIALS SCIENCE↗

Catalytic Zirconium/Hafnium-Based Metal–Organic Frameworks

Metal–organic frameworks (MOFs) are highly versatile materials that find applications in several fields. Highly stable zirconium/hafnium-based MOFs were recently introduced and nowadays represent a rapidly growing family. Their unique and intriguing properties make them privileged materials and outstanding candidates in heterogeneous catalysis, finding use either as catalysts or catalyst supports. Various techniques have been developed to incorporate active species into Zr-MOFs, giving rise to catalysts that often demonstrate higher performances or unusual activity when compared with their homogeneous analogues. Catalytic functions are commonly incorporated at the zirconium-oxide node, at the linker, or encapsulated in the pores. Representative examples are discussed, and advantages in adopting Zr- and Hf-MOFs in catalytic applications are highlighted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energy Efficient Formaldehyde Synthesis by Direct Hydrogenation of Carbon Monoxide in Functionalized Metal–Organic Frameworks

Formaldehyde (CH 2 O) is a highly versatile platform chemical with an annual production of over 30 megatons. The current most widely used industrial method for formaldehyde synthesis is very energy intensive and plagued with significant exergy losses. We propose a highly efficient heterogeneous nanoporous catalyst capable of direct hydrogenation of CO to CH 2 O followed by condensation of CH 2 O from a mixture of CO and H 2 , which are non-condensable gases. The key to this synthesis is a Lewis Pair (LP) functionalized metal-organic framework (MOF) heterogeneous porous catalyst. We have computed reaction pathways, barriers, and uncertainties for CO hydrogenation on a LP functionalized MOF using various density functional theory (DFT) methods and high-level ab initio methods. We have assessed the uncertainties in the energetics inherent in the DFT functionals. Here, we predict that the thermodynamics of CH 2 O synthesis will be enhanced relative to gas phase synthesis and more importantly, will not be equilibrium limited because the barrier to product desorption from the MOF is much lower than the barrier for the reverse reaction. Hence, the product will be continuously removed from the process, facilitating very high overall conversion rates. Our proposed process will dramatically improve the sustainability of CH 2 O synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase Transitions in Metal–Organic Frameworks Directly Monitored through In Situ Variable Temperature Liquid-Cell Transmission Electron Microscopy and In Situ X-ray Diffraction

Zr 6 -based metal–organic frameworks (MOFs) with tetratopic organic linkers have been extensively investigated owing to their versatile structural tunability. While diverse topologies and polymorphism in the resulting MOFs are often encountered with tetratopic linkers and Zr 6 nodes, reports on phase transitions within these systems are rare. Thus, we have a limited understanding of polymorph transformations, hindering the rational development of pure phase materials. In this study, a phase transition from a microporous MOF, scu-NU-906, to a mesoporous MOF, csq-NU-1008, was discovered and monitored through in situ variable temperature liquid-cell transmission electron microscopy (VT-LCTEM), high-resolution transmission electron microscopy (HRTEM), and in situ variable temperature powder X-ray diffraction (VT-PXRD). Furthermore, it was found that the microporous- to-mesoporous transformation in the presence of formic acid occurs via a concomitant dissolution–reprecipitation process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Superradiance and Directional Exciton Migration in Metal–Organic Frameworks

Crystalline metal–organic frameworks (MOFs) are promising synthetic analogues of photosynthetic light-harvesting complexes (LHCs). The precise assembly of linkers (organic chromophores) around the topology-defined pores offers the evolution of unique photophysical behaviors that are reminiscence of LHCs. These include MOF excited states with photoabsorbed energy that is spatially dispersed over multiple linkers defining the molecular excitons. The multilinker molecular excitons display superradiance–a hallmark of coupled oscillators seen in LHCs–with radiative rate constant (k rad ) exceeding that of a single linker. Our theoretical model and experimental results on three zirconium MOFs, namely, PCN-222(Zn), NU-1000, and SIU-100, with similar topology but varying linkers suggest that the size of such molecular excitons depends on the electronic symmetry of the linker. This multilinker exciton model effectively predicts the energy transfer rate constant; corresponding single-step exciton hopping time, ranging from a few picoseconds in SIU-100 and NU-1000 to a few hundreds of picoseconds in PCN-222(Zn), matches well with the experimental data. The model also predicts the anisotropy of exciton displacement with preferential migration along the crystallographic c-axis. Overall, these findings establish various missing links defining the exciton size and dynamics in MOF-assembled linkers. Furthermore, the understandings will provide design principles, especially, positioning the catalysts or electrode relative to the linker orientation for low-density solar energy conversion systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modulating Chemical Environments of Metal–Organic Framework-Supported Molybdenum(VI) Catalysts for Insights into the Structure–Activity Relationship in Cyclohexene Epoxidation

Solid supports are crucial in heterogeneous catalysis due to their profound effects on catalytic activity and selectivity. However, elucidating the specific effects arising from such supports remains challenging. We selected a series of metal–organic frameworks (MOFs) with 8-connected Zr 6 nodes as supports to deposit molybdenum(VI) onto to study the effects of pore environment and topology on the resulting Mo-supported catalysts. As characterized by X-ray absorption spectroscopy (XAS) and single-crystal X-ray diffraction (SCXRD), we modulated the chemical environments of the deposited Mo species. For Mo-NU-1000, the Mo species monodentately bound to the Zr 6 nodes were anchored in the microporous c-pore, but for Mo-NU-1008 they were bound in the mesopore of Mo-NU-1008. Both monodentate and bidentate modes were found in the mesopore of Mo-NU-1200. Cyclohexene epoxidation with H 2 O 2 was probed to evaluate the support effect on catalytic activity and to unveil the resulting structure–activity relationships. SCXRD and XAS studies demonstrated the atomically precise structural differences of the Mo binding motifs over the course of cyclohexene epoxidation. No apparent structural change was observed for Mo-NU-1000, whereas the monodentate mode of Mo species in Mo-NU-1008 and the monodentate and bidentate Mo species in Mo-NU-1200 evolved to a new bidentate mode bound between two adjacent oxygen atoms from the Zr 6 node. This work demonstrates the great advantage of using MOF supports for constructing heterogeneous catalysts with modulated chemical environments of an active species and elucidating structure–activity relationships in the resulting reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photocatalytic Biocidal Coatings Featuring Zr 6 Ti 4 -Based Metal–Organic Frameworks

The world is currently suffering socially, economically, and politically from the recent pandemic outbreak due to the Coronavirus Disease 2019 (COVID-19), and those in hospitals, schools, and elderly nursing homes face enhanced threats. Healthcare textiles, such as masks and medical staff gowns, are susceptible to contamination of various pathogenic microorganisms, including bacteria and viruses. Here, metal–organic frameworks (MOFs) can potentially address these challenges due to their tunable reactivity and ability to be incorporated as porous coatings on textile materials. Here, we report how incorporating titanium into the zirconium-pyrene-based MOF NU-1000, denoted as NU-1012, generates a highly reactive biocidal photocatalyst. This MOF features a rare ligand migration phenomenon, and both the Ti/Zr center and the pyrene linker act synergistically as dual active centers and widen the absorption band for this material that results in enhanced reactive oxygen species (ROS) generation upon visible light irradiation. Additionally, we found the ligand migration process is generally applicable to other csq topology Zr-MOFs. Importantly, NU-1012 can be easily incorporated onto cotton textile cloths as a coating, and the resulting composite material demonstrates fast and potent biocidal activity against Gram-negative bacteria (E. coli), Gram-positive bacteria (S. epidermidis), and T7 bacteriophage virus with up to a 7-log (99.99999%) reduction within one hour under simulated daylight.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methane Oxidation to Methanol Catalyzed by Cu-Oxo Clusters Stabilized in NU-1000 Metal–Organic Framework

The catalyzed conversion of shale gas-derived light hydrocarbons, e.g. methane to methanol, for further application as automotive fuels and/or bulk chemicals is especially attractive in light of improved methods of hydrocarbon extraction. MOF based catalysts have previously been demonstrated to be active for a range of catalytic reactions. In this work we used Cu-NU1000 as a methane-to-methanol oxidation catalyst. In addition to product studies, in-situ X-ray Absorption Spectroscopic (XAS) experiments are performed under catalytic conditions in order to follow the modification of the Cu-species and directly probe the structure/activity properties of the Cu-NU1000 system. The insights reported herein serve as a first look at metal-organic framework materials as catalysts for methane oxidation and be the basis for development of the subsequent generations of materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal–Organic Framework Containing Planar Metal-Binding Sites: Efficiently and Cost-Effectively Enhancing the Kinetic Separation of C 2 H 2 /C 2 H 4

One of the emerging problems plaguing the chemical industry today is the efficient and cost-effective separation of C 2 hydrocarbons. In order to help address this problem, we report a new material, NbU-1, constructed by extremely cheap starting materials. The special structural characteristics of NbU-1 such as the planar, mixed-valence copper clusters and Lewis-basic adsorption channels enforce interactions with acetylene molecules that lead to the highest kinetic separation efficiency for C 2 H 2 /C 2 H 4 . Via DFT-D calculations, it is indicated that C 2 H 2 molecules are adsorbed onto the two adjacent Cu(I) centers, but not the usual single open metal sites of Cu centers. Here, the reported results not only provide information for a deep investigation into the separation mechanism but also offer an alternative strategy for preparing cost-effective materials that can perform highly efficient separations of light hydrocarbons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polymer–inorganic solid–electrolyte interphase for stable lithium metal batteries under lean electrolyte conditions

The solid-electrolyte interphase (SEI) is pivotal in stabilizing lithium metal anodes for rechargeable batteries. However, the SEI is constantly reforming and consuming electrolyte with cycling. The rational design of a stable SEI is plagued by the failure to control its structure and stability. In this article, we report a molecular-level SEI design using a reactive polymer composite, which effectively suppresses electrolyte consumption in the formation and maintenance of the SEI. The SEI layer consists of a polymeric lithium salt, lithium fluoride nanoparticles, and graphene oxide sheets, as evidenced by cryo-TEM, AFM, and surface-sensitive spectroscopies. This structure is different from that of a conventional electrolyte-derived SEI and has excellent passivation properties, homogeneity, and mechanical strength. The use of the polymer-inorganic SEI enables high-efficiency Li deposition and stable cycling of 4V Li|LiNi 0.5 Co 0.2 Mn 0.3 O 2 cells under lean electrolyte, limited Li excess, and high capacity conditions. The same approach was also applied to design stable SEI layers for sodium and zinc anodes.

25 ENERGY STORAGE↗

Liquid metal alloy ion source based metal ion injection into a room-temperature electron beam ion source

We have carried out a series of measurements demonstrating the feasibility of using the Dresden electron beam ion source (EBIS)-A, a table-top sized, permanent magnet technology based electron beam ion source, as a charge breeder. Low charged gold ions from an AuGe liquid metal alloy ion source were injected into the EBIS and re-extracted as highly charged ions, thereby producing charge states as high as Au{sup 60+}. The setup, the charge breeding technique, breeding efficiencies as well as acceptance and emittance studies are presented.

43 PARTICLE ACCELERATORS↗

A combined hard x-ray photoelectron spectroscopy and electrical characterisation study of metal/SiO{sub 2}/Si(100) metal-oxide-semiconductor structures

Combined hard x-ray photoelectron spectroscopy (HAXPES) and electrical characterisation measurements on identical Si based metal-oxide-semiconductor structures have been performed. The results obtained indicate that surface potential changes at the Si/SiO{sub 2} interface due to the presence of a thin Al or Ni gate layer can be detected with HAXPES. Changes in the Si/SiO{sub 2} band bending at zero gate voltage and the flat band voltage for the case of Al and Ni gate layers derived from the silicon core levels shifts observed in the HAXPES spectra are in agreement with values derived from capacitance-voltage measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observation of rebirth of metallic paths during resistance switching of metal nanowire

To clarify the mechanism of resistance-switching phenomena, we have investigated the change in the electronic structure of a Ni nanowire device during resistance-switching operations using scanning photoelectron microscopy techniques. We directly observed the disappearance of density of state (DOS) at the Fermi level (E{sub F}) in a high-resistance state and recovery of a finite DOS at E{sub F} in a low-resistance state. These results are direct evidence that the Ni nanowire is fully oxidized after switching to the high-resistance state and that Ni-metal conductive paths in the oxidized nanowire are recovered in the low-resistance state.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effective thermal conductivity of metal and non-metal particulate composites with interfacial thermal resistance at high volume fraction of nano to macro-sized spheres

In this study, we propose a theoretical model to compute the effective thermal conductivity of metal and dielectric spherical particle reinforced composites with interfacial thermal resistance. We consider a wide range of filler volume fraction with sizes ranging from nano- to macro-scale. The model, based on the differential effective medium theory, accounts for particle interactions through two sets of volume fraction corrections. The first correction accounts for a finite volume of composite and the second correction introduces a self-crowding factor that allows us to develop an accurate model for particle interaction even for high volume fraction of fillers. The model is examined to other published models, experiments, and numerical simulations for different types of composites. We observe an excellent agreement between the model and published datasets over a wide range of particle volume fractions and material properties of the composite constituents.

36 MATERIALS SCIENCE↗