Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNET”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Vacuum arcing behavior between transverse magnetic field contacts subjected to variable axial magnetic field

The objective of this work is to reveal the effects of an axial magnetic field (AMF) on the vacuum arc characteristics between transverse magnetic field (TMF) contacts. These vacuum arc characteristics include the vacuum arcing behavior and the arc voltage waveform. In the experiments, an external AMF was applied to a pair of TMF contacts. The external AMF flux density B{sub AMF} can be adjusted from 0 to 110 mT. The arc current in the tests varied over a range from 0 to 20 kA rms at 45 Hz. The contact material was CuCr25 (25% Cr). A high-speed charge-coupled device video camera was used to record the vacuum arc evolution. The experimental results show that the application of the AMF effectively reduces the TMF arc voltage noise component and reduces the formation of liquid metal drops between the contacts. The diffuse arc duration increases linearly with increasing AMF flux density, but it also decreases linearly with increasing arc current under application of the external AMF. The results also indicate that the diffuse arc duration before the current zero is usually more than 1 ms under the condition that the value of the AMF per kiloampere is more than 2.0 mT/kA. Finally, under application of the AMF, the arc column of the TMF contacts may constrict and remain in the center region without transverse rotation. Therefore, the combined TMF–AMF contacts should be designed such that they guarantee that the AMF is not so strong as to oppose transverse rotation of the arc column.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tailoring Magnetic Skyrmions by Geometric Confinement of Magnetic Structures

Nanoscale magnetic skyrmions have interesting static and transport properties that make them candidates for future spintronic devices. Control and manipulation of the size and behavior of skyrmions is thus of crucial importance. Here, using a Ginzburg-Landau approach, we show theoretically that skyrmions and skyrmion lattices can be stabilized by a spatial modulation of the uniaxial magnetic anisotropy in a thin film of a centro-symmetric ferromagnet. Remarkably, the skyrmion size is determined by the ratio of the exchange length and the period of the spatial modulation of the anisotropy, at variance with conventional skyrmions stabilized by dipolar and Dzyaloshinskii–Moriya interactions.

36 MATERIALS SCIENCE↗

Transient magnetic field diffusion considerations relevant to magnetically assisted indirect drive inertial confinement fusion

We report application of a magnetic field to an indirect drive inertial confinement fusion target requires diffusion of the field through the high-Z and electrically conducting Hohlraum. The onset of the external field generates eddy currents in the Hohlraum wall that result in (1) a reduction of the peak field at the capsule, (2) heating of the Hohlraum wall through Ohmic dissipation, and (3) wall movement due to the inward force from the eddy current interacting with the field. Heating of the wall causes an increase in blackbody radiation which can preheat the capsule and frozen deuterium–tritium fuel, while wall motion leads to potential misalignment of the lasers at the Hohlraum wall. Limiting these detrimental effects sets requirements on the tolerable magnitude of each effect. We present a nonlinear model for B-field diffusion through an infinitely long thin-walled cylinder with a temperature dependent resistivity, to show that a 15 μm thick wall of pure gold fails to meet these requirements. A new Hohlraum material made from an alloy of Au and Ta has a measured resistivity of ≥60 times that of Au and is shown with the nonlinear model to meet the requirements for magnetization. We compare the nonlinear model to simulations of the actual Hohlraum target using a finite element code which includes temperature-dependent Hohlraum resistivity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Emergence of long-range order in sheets of magnetic dimers

Quantum spins placed on the corners of a square lattice can dimerize and form singlets, which then can be transformed into a magnetic state as the interactions between dimers increase beyond threshold. This is a strictly 2D transition in theory, but real-world materials often need the third dimension to stabilize long-range order. We use high pressures to convert sheets of Cu2+ spin 1/2 dimers from local singlets to global antiferromagnet in the model system SrCu2(BO3)2. Single-crystal neutron diffraction measurements at pressures above 5 GPa provide a direct signature of the antiferromagnetic ordered state, whereas high-resolution neutron powder and X-ray diffraction at commensurate pressures reveal a tilting of the Cu spins out of the plane with a critical exponent characteristic of 3D transitions. The addition of anisotropic, interplane, spin–orbit terms in the venerable Shastry–Sutherland Hamiltonian accounts for the influence of the third dimension.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

INTERPRETING MAGNETIC VARIANCE ANISOTROPY MEASUREMENTS IN THE SOLAR WIND

The magnetic variance anisotropy (A{sub m}) of the solar wind has been used widely as a method to identify the nature of solar wind turbulent fluctuations; however, a thorough discussion of the meaning and interpretation of the A{sub m} has not appeared in the literature. This paper explores the implications and limitations of using the A{sub m} as a method for constraining the solar wind fluctuation mode composition and presents a more informative method for interpreting spacecraft data. The paper also compares predictions of the A{sub m} from linear theory to nonlinear turbulence simulations and solar wind measurements. In both cases, linear theory compares well and suggests that the solar wind for the interval studied is dominantly Alfvenic in the inertial and dissipation ranges to scales of k{rho}{sub i} {approx_equal} 5.

79 ASTRONOMY AND ASTROPHYSICS↗

FIRST SYNOPTIC MAPS OF PHOTOSPHERIC VECTOR MAGNETIC FIELD FROM SOLIS/VSM: NON-RADIAL MAGNETIC FIELDS AND HEMISPHERIC PATTERN OF HELICITY

We use daily full-disk vector magnetograms from Vector Spectromagnetograph on Synoptic Optical Long-term Investigations of the Sun system to synthesize the first Carrington maps of the photospheric vector magnetic field. We describe these maps and make a comparison of the observed radial field with the radial field estimate from line-of-sight magnetograms. Furthermore, we employ these maps to study the hemispheric pattern of current helicity density, H{sub c} , during the rising phase of solar cycle 24. The longitudinal average over the 23 consecutive solar rotations shows a clear signature of the hemispheric helicity rule, i.e., H{sub c} is predominantly negative in the north and positive in the south. Although our data include the early phase of cycle 24, there appears to be no evidence for a possible (systematic) reversal of the hemispheric helicity rule at the beginning of the cycle as predicted by some dynamo models. Furthermore, we compute the hemispheric pattern in active region latitudes (-30 Degree-Sign {<=} {theta} {<=} 30 Degree-Sign ) separately for weak (100 G < |B{sub r} | < 500 G) and strong (|B{sub r} | > 1000 G) radial magnetic fields. We find that while the current helicity of strong fields follows the well-known hemispheric rule (i.e., {theta} {center_dot} H{sub c} < 0), H{sub c} of weak fields exhibits an inverse hemispheric behavior (i.e., {theta} {center_dot} H{sub c} > 0), albeit with large statistical scatter. We discuss two plausible scenarios to explain the opposite hemispheric trend of helicity in weak and strong field regions.

79 ASTRONOMY AND ASTROPHYSICS↗

INTERVALS OF RADIAL INTERPLANETARY MAGNETIC FIELDS AT 1 AU, THEIR ASSOCIATION WITH RAREFACTION REGIONS, AND THEIR APPARENT MAGNETIC FOOT POINTS AT THE SUN

We have examined 226 intervals of nearly radial interplanetary magnetic field orientations at 1 AU lasting in excess of 6 hr. They are found within rarefaction regions as are the previously reported high-latitude observations. We show that these rarefactions typically do not involve high-speed wind such as that seen by Ulysses at high latitudes during solar minimum. We have examined both the wind speeds and the thermal ion composition before, during and after the rarefaction in an effort to establish the source of the flow that leads to the formation of the rarefaction. We find that the bulk of the measurements, both fast- and slow-wind intervals, possess both wind speeds and thermal ion compositions that suggest they come from typical low-latitude sources that are nominally considered slow-wind sources. In other words, we find relatively little evidence of polar coronal hole sources even when we examine the faster wind ahead of the rarefaction regions. While this is in contrast to high-latitude observations, we argue that this is to be expected of low-latitude observations where polar coronal hole sources are less prevalent. As with the previous high-latitude observations, we contend that the best explanation for these periods of radial magnetic field is interchange reconnection between two sources of different wind speed.

79 ASTRONOMY AND ASTROPHYSICS↗

CONSTRAINTS ON THE INTERGALACTIC MAGNETIC FIELD WITH GAMMA-RAY OBSERVATIONS OF BLAZARS

Distant BL Lacertae objects emit γ-rays that interact with the extragalactic background light (EBL), creating electron–positron pairs, and reducing the flux measured by ground-based imaging atmospheric Cherenkov telescopes (IACTs) at very-high energies (VHE). These pairs can Compton-scatter the cosmic microwave background, creating a γ-ray signature at slightly lower energies that is observable by the Fermi Large Area Telescope (LAT). This signal is strongly dependent on the intergalactic magnetic field (IGMF) strength (B) and its coherence length (L{sub B}). We use IACT spectra taken from the literature for 5 VHE-detected BL Lac objects and combine them with LAT spectra for these sources to constrain these IGMF parameters. Low B values can be ruled out by the constraint that the cascade flux cannot exceed that observed by the LAT. High values of B can be ruled out from the constraint that the EBL-deabsorbed IACT spectrum cannot be greater than the LAT spectrum extrapolated into the VHE band, unless the cascade spectrum contributes a sizable fraction of the LAT flux. We rule out low B values (B ≲ 10{sup −19} G for L{sub B} ≥ 1 Mpc) at >5σ in all trials with different EBL models and data selection, except when using >1 GeV spectra and the lowest EBL models. We were not able to constrain high values of B.

79 ASTRONOMY AND ASTROPHYSICS↗

Accelerating the magnetic island by the modulated resonant magnetic perturbation for the disruption avoidance on J-TEXT

We report the acceleration of the magnetic island rotation by the modulated resonant magnetic perturbation (MRMP) has been studied in J-TEXT tokamak experiments. After applying the MRMP, the phase difference between the tearing mode (TM) and MRMP, Δξ, oscillated near the effective phase difference, Δξ eff , which was defined as the time averaged value of Δξ. When the Δξ eff was closed to the—π/2, the MRMP only contributed an accelerating torque on the TM. As the result, the TM rotation frequency was increased by a few kilohertz for the optimized relative phase by small RMPs of the order of 10 -5 of the toroidal field and the locked mode induced disruption was avoided. It is found that the TM rotation could be increased to a higher frequency by applying a stronger MRMP. There is a negative sinusoidal relationship between TM frequency and Δξ eff .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spatial decomposition of magnetic anisotropy in magnets: Application to doped Fe 16 N 2

We propose a scheme of decomposition of the total relativistic energy in solids to intra- and interatomic contributions. The method is based on a site variation of such fundamental constant as the speed of light. As a practical illustration of the method, we tested such decomposition in the case of a spin-orbit interaction variation for the decomposition of the magnetic anisotropy energy (MAE) in CoPt. We further studied the α" - Fe 16 N 2 magnet doped by Bi, Sb, Co, and Pt atoms. It was found that the addition of Pt atoms can enhance the MAE by as much as five times while Bi and Sb substitutions double the total MAE. Using the proposed technique, we demonstrate the spatial distribution of these enhancements. Our studies also suggest that Sb, Pt, and Co substitutions could be synthesized by experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic ground state of the two isostructual polymeric quantum magnets [ Cu ( HF 2 ) ( pyrazine ) 2 ] SbF 6 and [ Co ( HF 2 ) ( pyrazine ) 2 ] SbF 6 investigated with neutron powder diffraction

The magnetic ground state of two isostructural coordination polymers, (i) the quasi-two-dimensional S=1/2 square-lattice antiferromagnet [Cu(HF 2 )(pyrazine) 2 ]SbF 6 and (ii) a related compound [Co(HF 2 )(pyrazine)2]SbF6, was examined with neutron powder diffraction measurements. We find that the ordered moments of the Heisenberg S=1/2 Cu(II) ions in [Cu(HF 2 )(pyrazine) 2 ]SbF 6 are 0.6(1)μ b , while the ordered moments for the Co(II) ions in [Co(HF 2 )(pyrazine) 2 ]SbF 6 are 3.02(6)μ b . For Cu(II), this reduced moment indicates the presence of quantum fluctuations below the ordering temperature. We also show from heat capacity and electron spin resonance measurements that due to the crystal electric field splitting of the S=3/2 Co(II) ions in [Co(HF 2 )(pyrazine) 2 ]SbF 6 , this isostructual polymer also behaves as an effective spin-half magnet at low temperatures. Furthermore, the Co moments in [Co(HF 2 )(pyrazine) 2 ]SbF 6 show strong easy-axis anisotropy, neutron diffraction data, which do not support the presence of quantum fluctuations in the ground state, and heat capacity data, which are consistent with 2D or close to 3D spatial exchange anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic phase diagram and electronic structure of UPt 2 Si 2 at high magnetic fields: A possible field-induced Lifshitz transition

We have measured Hall effect, magnetotransport and magnetostriction on the field induced phases of single crystalline UPt2Si2 in magnetic fields up to 60T at temperatures down to 50mK, this way firmly establishing the phase diagram for magnetic fields Bka and c axes. Moreover, for Bkc axis we observe strong changes in the Hall effect at the phase boundaries. From a comparison to band structure calculations utilizing the concept of a dual nature of the uranium 5f electrons, we propose that these represent field induced topological changes of the Fermi surface due to at least one Lifshitz transition. Furthermore, we find a unique history dependence of the magnetotransport and magnetostriction data, indicating that the proposed Lifshitz type transition is of a discontinuous nature, as predicted for interacting electron systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Proton deflectometry analysis in magnetized plasmas: Magnetic field reconstruction in one dimension

Proton deflectometry is used in magnetized high-energy-density plasmas to observe electromagnetic fields. Here we describe a reconstruction algorithm to recover the electromagnetic fields from proton fluence data in 1-D. The algorithm is verified against analytic solutions and applied to example data. Next, we study the role of source fluence uncertainty for 1-D reconstructions. We show that reconstruction boundary conditions can be used to constrain the source fluence profile and use this to develop a reconstruction using a specified pair of boundary conditions on the magnetic field. From these considerations, we experimentally demonstrate a hybrid mesh-fluence reconstruction technique where fields are reconstructed from fluence data in an interior region with boundary conditions supplied by direct mesh measurements at the boundary.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Conversion of Magnetic Energy to Plasma Kinetic Energy During Guide Field Magnetic Reconnection in the Laboratory

Here, we present laboratory measurements showing the two-dimensional (2D) structure of energy conversion during magnetic reconnection with a guide field over the electron and ion diffusion regions, resolving the separate energy deposition on electrons and ions. We find that the electrons are energized by the parallel electric field at two locations, at the X line and around the separatrices. On the other hand, the ions are energized ballistically by the perpendicular electric field in the vicinity of the high-density separatrices. An energy balance calculation by evaluating the terms of the Poynting theorem shows that 40% of the magnetic energy is converted to particle energy, 2/3 of which is transferred to ions and 1/3 to electrons. Further analysis suggests that the energy deposited on particles manifests mostly in the form of thermal kinetic energy in the diffusion regions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Combined Dimensional and Topology Optimization of Interior Permanent Magnet Synchronous Machine Rotors Using a Permanent Magnet Function Interpolation Method

This paper presents a magneto-structural combined dimensional and topology optimization technique for interior permanent magnet synchronous machine (IPMSM) rotors. Dimensional changes to the permanent magnet (PM) location or size are accomplished by interpolating or projecting a smoothed Heaviside rectangular function representing the presence of PM material onto the IPMSM rotor design domain mesh. A density based Solid Isotropic with Material Penalization (SIMP) topology optimization approach is then used to vary the presence of electrical steel in mesh elements to form flux barriers around the PM. The proposed method enforces a defined shape for the PM without requiring the mesh in the design domain to be deformed. Three examples are presented to demonstrate the technique: two flat bar IPMSM and one V-shaped IPMSM.

33 ADVANCED PROPULSION SYSTEMS↗

Effect of processing hydrogen pressure on magnetic properties of HDDR Nd-Fe-B magnet

High coercivity and anisotropic Nd-Fe-B powders for making anisotropic bonded magnets have been prepared by hydrogenation-disproportionation-desorption-recombination (HDDR). In this work, we found that the processing hydrogen pressure is intimately correlated with the formation of c-axis crystal texture of Nd 2 Fe 14 B phase. There exists a critical hydrogen pressure, P crit , during hydrogen-disproportionation stage, that promotes the formation of c-axis crystal texture. When processing hydrogen pressure is higher than P crit , the formation of c-axis texture deteriorates and results in isotropic Nd-Fe-B magnetic powders. The existence of P crit is ascribed to the thermodynamics and kinetics origin during HDDR process.

36 MATERIALS SCIENCE↗