Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LUNAR EXPLORATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Magnetospheric protons and electrons encountered by the moon in the plasma sheet

Results are summarized for a study of plasma-sheet particles (and their flow) encountered by the moon during its passage through the geomagnetic tail. The study is based on analysis of data obtained with a modulated Faraday cup on board the lunar-anchored spacecraft Explorer 35. It is shown that the electrons have a rapidly fluctuating non-Maxwellian energy distribution with a mean energy of several hundred electron volts and a density of approximately 0.2 per cu cm. Protons with energies of the order of 1 keV were usually detected above the instrument background when flowing towards earth at about 200 km/sec. It is suggested that strong terrestrial polar winds during the early history of the earth-moon system could have caused some erosion of the front side of the moon and that the relative smoothness of the same side could be explained in terms of gravitational shielding by the earth from the interplanetary rock flux.

Prakash, A.↗

Conduction of thermal energy in the neighborhood of the earth's bow shock

The Rankine-Hugoniot equations for MHD shocks are generalized by the addition of a term to the energy conservation equation representing a nonzero heat flow in the plasma in the neighborhood of the shock. This generalization is found to be compatible with the assumption of infinite electrical conductivity. The effects of plasma waves in this treatment are of the order of the reciprocal Alfvenic Mach number squared and hence are neglected. The effect of alpha particles in the solar wind is discussed. Seven crossings of the earth's bow shock by Explorer 35 in lunar orbit are analyzed. Sufficient data are available so that the determination of a dimensionless parameter, psi, characterizing the heat-flow difference across the bow shock is possible. The values of psi indicate energy-flux densities due to heat flow which are a nonnegligible fraction of the total energy flux. Two possible interpretations of psi are discussed.

Hohlfeld, R. G.↗

Applied photo interpretation for airbrush cartography

Lunar and planetary exploration has required the development of new techniques of cartographic portrayal. Conventional photo-interpretive methods employing size, shape, shadow, tone, pattern, and texture are applied to computer-processed satellite television images. Comparative judgements are affected by illumination, resolution, variations in surface coloration, and transmission or processing artifacts. The portrayal of tonal densities in a relief illustration is performed using a unique airbrush technique derived from hill-shading of contour maps. The control of tone and line quality is essential because the mid-gray to dark tone densities must be finalized prior to the addition of highlights to the drawing. This is done with an electric eraser until the drawing is completed. The drawing density is controlled with a reflectance-reading densitometer to meet certain density guidelines. The versatility of planetary photo-interpretive methods for airbrushed map portrayals is demonstrated by the application of these techniques to the synthesis of nonrelief data.

Inge, J. L.↗

The role of automatic control in future interplanetary spaceflight

The paper reviews the guidance and automatic control techniques used in previous U.S. and Soviet lunar and planetary exploration spacecraft, and examines the objectives and requirements of potential future interplanetary missions from the viewpoint of their further demands on automatic control technology. These missions include the Venus orbital imaging radar mission, the Pioneer Mars penetrator mission, the Mars surface sample return mission, Pioneer Saturn/Uranus/Titan probe missions, the Mariner Jupiter orbiter with daughter satellite, and comet and asteroid missions.

Scull, J. R.↗

The Deep Structure of Lunar Basins: Clues to the Understanding of Basin Formation and Modification

Basin excavation has played a major role in shaping the surface and subsurface of the Moon. Though photogeologic observations provide estimates for the present volumes of lunar impact basins and their ejecta deposits, there is not sufficient information to describe completely either the geometry of the basins at the time of impact or their modification with time. Determination of the structure of the crust and upper mantle beneath large basins can provide important insight into the thermal and mechanical processes associated with basin formation and modification as well as the differences in these processes as functions of basin age and size. Using observed gravity and topography together with the seismically determined crustal thickness of the central nearside, a model for the structure of the crust and upper mantle of the nearside of the Moon is presented. With this model the deep structure of the largest lunar basins are compared. The implications for the processes of basin formation and modification at different stages in lunar history are explored.

Bratt, S. R.↗

NASA thesaurus: Astronomy vocabulary

A terminology of descriptors used by the NASA Scientific and Technical information effort to index documents in the area of astronomy is presented. The terms are listed in hierarchical format derived from the 1988 edition of the NASA Thesaurus Volume 1 -- Hierarchical Listing. Over 1600 terms are included. In addition to astronomy, space sciences covered include astrophysics, cosmology, lunar flight and exploration, meteors and meteorites, celestial mechanics, planetary flight and exploration, and planetary science.

Source record↗

Space Station services and design features for users

The operational design features and services planned for the NASA Space Station will furnish, in addition to novel opportunities and facilities, lower costs through interface standardization and automation and faster access by means of computer-aided integration and control processes. By furnishing a basis for large-scale space exploitation, the Space Station will possess industrial production and operational services capabilities that may be used by the private sector for commercial ventures; it could also ultimately support lunar and planetary exploration spacecraft assembly and launch facilities.

Kurzhals, Peter R.↗

Autonomous intelligent systems

NASA's Office of Aeronautics and Space Technology (OAST) has instituted a 'Systems Autonomy' technology development program aimed at the creation of increasingly sophisticated AI systems. Expert system production will in due course be followed by fully autonomous AI systems capable of the complex mission objectives of the Space Station, as well as of lunar and Martian exploration. AI systems must demonstrate the degree of their autonomy in a real-time operational environment, and then undergo mating to robotics technologies. OAST's Systems Autonomy Program and Robotics Program are discussed with a view to anticipated difficulties in their integration.

Lum, H.↗

Advanced air revitalization system modeling and testing

To support manned lunar and Martian exploration, an extensive evaluation of air revitalization subsystems (ARS) is being conducted. The major operations under study include carbon dioxide removal and reduction; oxygen and nitrogen production, storage, and distribution; humidity and temperature control; and trace contaminant control. A comprehensive analysis program based on a generalized block flow model was developed to facilitate the evaluation of various processes and their interaction. ASPEN PLUS was used in modelling carbon dioxide removal and reduction. Several life support test stands were developed to test new and existing technologies for their potential applicability in space. The goal was to identify processes which use compact, lightweight equipment and maximize the recovery of oxygen and water. The carbon dioxide removal test stands include solid amine/vacuum desorption (SAVD), regenerative silver oxide chemisorption, and electrochemical carbon dioxide concentration (EDC). Membrane-based carbon dioxide removal and humidity control, catalytic reduction of carbon dioxide, and catalytic oxidation of trace contaminants were also investigated.

Dall-Baumann, Liese↗

Developing a taxonomy for mission architecture definition

The Lunar and Mars Exploration Program Office (LMEPO) was tasked to define candidate architectures for the Space Exploration Initiative to submit to NASA senior management and an externally constituted Outreach Synthesis Group. A systematic, structured process for developing, characterizing, and describing the alternate mission architectures, and applying this process to future studies was developed. The work was done in two phases: (1) national needs were identified and categorized into objectives achievable by the Space Exploration Initiative; and (2) a program development process was created which both hierarchically and iteratively describes the program planning process.

Neubek, Deborah J.↗

Autonomous Rendezvous and Docking Conference, volume 2

Autonomous Rendezvous and Docking (ARD) will be a requirement for future space programs. Clear examples include satellite servicing, repair, recovery, and reboost in the near term, and the longer range lunar and planetary exploration programs. ARD will permit more aggressive unmanned space activities, while providing a valuable operational capability for manned missions. The purpose of the conference is to identify the technologies required for an on-orbit demonstration of ARD, assess the maturity of those technologies, and provide the necessary insight for a quality assessment of programmatic management, technical, schedule, and cost risks.

Source record↗

Generation of 3-D surface maps in waste storage silos using a structured light source

Surface contours inside the large waste storage tanks typical of the Department of Energy (DOE) complex are, in general, highly irregular. In addition to pipes and other pieces of equipment in the tanks, the surfaces may have features such as mounds, fissures, crystalline structures, and mixed solid and liquid forms. Prior to remediation activities, it will be necessary to characterize the waste to determine the most effective remediation approaches. Surface contour data will be required both prior to and during remediation. The use is described of a structured light source to generate 3-D surface contour maps of the interior of waste storage silos at the Feed Materials Production Center at Fernald, OH. The landscape inside these large waste storage tanks bears a strong resemblance to some of the landscapes that might be encountered during lunar or planetary exploration. Hence, these terrestrial 3-D mapping techniques may be directly applicable to extraterrestrial exploration. In further development, it will be demonstrated that these 3-D data can be used for robotic task planning just as 3-D surface contour data of a satellite could be used to plan maintenance tasks for a space-based servicing robot.

Burks, B. L.↗

Autonomous prealignment of a docking mechanism

Proposed future space exploration, such as lunar and Martian expeditions, will require autonomous docking of space vehicles. One proposed candidate method of autonomous docking utilizes a actively controlled parallel manipulator. Operation of the proposed docking manipulator can be segmented into four successive events: prealignment, capture/latching, attenuation, and structural rigidization. This paper discusses the development and testing of a digitally controlled, six-degree-of-freedom (6-DOF), parallel manipulator for the prealignment segment of a docking spacecraft.

Carroll, Monty B.↗

Crew health

Crew health concerns for Space Station Freedom are numerous due to medical hazards from isolation and confinement, internal and external environments, zero gravity effects, occupational exposures, and possible endogenous medical events. The operational crew health program will evolve from existing programs and from life sciences investigations aboard Space Station Freedom to include medical monitoring and certification, medical intervention, health maintenance and countermeasures, psychosocial support, and environmental health monitoring. The knowledge and experience gained regarding crew health issues and needs aboard Space Station Freedom will be used not only to verify requirements and programs for long duration space flight, but also in planning and preparation for Lunar and Mars exploration and colonization.

Billica, Roger D.↗

Sensor fusion for assured vision in space applications

By using emittance and reflectance radiation models, the effects of angle of observation, polarization, and spectral content are analyzed to characterize the geometrical and physical properties--reflectivity, emissivity, orientation, dielectric properties, and roughness--of a sensed surface. Based on this analysis, the use of microwave, infrared, and optical sensing is investigated to assure the perception of surfaces on a typical lunar outpost. Also, the concept of employing several sensors on a lunar outpost is explored. An approach for efficient hardware implementation of the fused sensor systems is discussed.

Collin, Marie-France↗

Future superconductivity applications in space - A review

High temperature superconductor (HISC) materials and devices can provide immediate applications for many space missions. The in-space thermal environment provides an opportunity to develop, test, and apply this technology to enhance performance and reliability for many applications of crucial importance to NASA. Specifically, the technology development areas include: (1) high current power transmission, (2) microwave components, devices, and antennas, (3) microwave, optical, and infrared sensors, (4) signal processors, (5) submillimeter wave components and systems, (6) ultra stable space clocks, (7) electromagnetic launch systems, and (8) accelerometers and position sensors for flight operations. HTSC is expected to impact NASA's Lunar Bases, Mars exploration, Mission to Earth, and Planetary exploration programs providing enabling and cost-effect technology. A review of the space applications of the HTSC technology is presented. Problem areas in technology development needing special attention are identified.

Krishen, Kumar↗

Earth-based antenna network tradeoffs for NASA's Space Exploration Initiative (SEI)

The results of a tradeoff study conducted for selection of the most viable earth-based antenna network architecture for support of NASA's Space Exploration Initiative (SEI) lunar and mars missions are summarized. The study addressed the lunar mission support requirements, and examined the performance, operations, and cost tradeoffs of using either the NASA Deep Space Network (DSN) large 34-m antennas or smaller commercial antennas to replace or supplement the 34-m antennas. The results are presented as a set of eight tables.

Manshadi, F.↗

Satellite and space propulsion system

Previous papers of this conference have described rocket systems capable of launching sizable payloads into satellite orbits. Propulsion systems that might be suitable for the next steps are discussed in this paper. Some of the uses for propulsion systems once satellites have been established are as follows: (1) increasing lifetime of low-altitude satellite, (2) controlling and altering satellite orbits, (3) lunar and interplanetary exploration and (4) auxiliary electric power. (author)

Moeckel, W E↗