Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “JuMP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Gas temperature measurement in CF{sub 4}, SF{sub 6}, O{sub 2}, Cl{sub 2}, and HBr inductively coupled plasmas

Neutral gas temperature (T{sub g}) is measured in an industrial high-density inductively coupled etch reactor operating in CF{sub 4}, SF{sub 6}, O{sub 2}, Cl{sub 2}, or HBr plasmas. Two laser diodes are used to deduce T{sub g} from the Doppler widths of 772.38 and 811.5 nm lines absorbed by Ar*({sup 3}P{sub 2}) metastable atoms, when a small amount of argon (5%) is added to the gas flow. With the 811.5 nm beam passing parallel to the wafer, T{sub g} near the wafer surface is obtained by laser absorption technique. With the 772.38 nm beam entering the top of the reactor perpendicular to the wafer surface, the volume averaged temperature is deduced by laser induced fluorescence technique. The volume averaged T{sub g} increases with radio frequency power and with pressure, although the temperature near the walls is only weakly dependent on gas pressure. The main effect of increasing the pressure is an enhancement of the temperature gradient between the discharge center and the wall boundary. Due to the thermal accommodation, the authors always observe a significant temperature jump between the surface and the gas in its vicinity. This gap is typically about 200 K. Gas temperatures for a wide range of pressure and rf powers are reported. These data will be useful to validate and improve numerical models of high-density reactive plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Staircase and saw-tooth field emission steps from nanopatterned n-type GaSb surfaces

High resolution field emission experiments from nanopatterned GaSb surfaces consisting of densely packed nanocones prepared by low ion-beam-energy sputtering are presented. Both uncovered and metal-covered nanopatterned surfaces were studied. Surprisingly, the field emission takes place by regular steps in the field emitted current. Depending on the field, the steps are either regular, flat, plateaus, or saw-tooth shaped. To the author's knowledge, this is the first time that such results have been reported. Each discrete jump in the field emission may be understood in terms of resonant tunneling through an extended surface space charge region in an n-type, high aspect ratio, single GaSb nanocone. The staircase shape may be understood from the spatial distribution of the aspect ratio of the cones.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab initio study of Ga-GaN system: Transition from adsorbed metal atoms to a metal–semiconductor junction

Ab initio studies of a GaN(0001)-Ga system with various thicknesses of a metallic Ga layer were undertaken. The studied systems extend from a GaN(0001) surface with a fractional coverage of gallium atoms to a Ga-GaN metal–semiconductor (m–s) contact. Electronic properties of the system are simulated using density functional theory calculations for different doping of the bulk semiconductor. It is shown that during transition from a bare GaN(0001) surface to a m–s heterostructure, the Fermi level stays pinned at a Ga-broken bond highly dispersive surface state to Ga–Ga states at the m–s interface. Adsorption of gallium leads to an energy gain of about 4 eV for a clean GaN(0001) surface and the energy decreases to 3.2 eV for a thickly Ga-covered surface. The transition to the m–s interface is observed. For a thick Ga overlayer such interface corresponds to a Schottky contact with a barrier equal to 0.9 and 0.6 eV for n- and p-type, respectively. Bond polarization-related dipole layer occurring due to an electron transfer to the metal leads to a potential energy jump of 1.5 eV, independent on the semiconductor doping. Additionally high electron density in the Ga–Ga bond region leads to an energy barrier about 1.2 eV high and 4 Å wide. This feature may adversely affect the conductivity of the n-type m–s system.

42 ENGINEERING↗

Man-made objects cuing in satellite imagery

We present a multi-scale framework for man-made structures cuing in satellite image regions. The approach is based on a hierarchical image segmentation followed by structural analysis. A hierarchical segmentation produces an image pyramid that contains a stack of irregular image partitions, represented as polygonized pixel patches, of successively reduced levels of detail (LOOs). We are jumping off from the over-segmented image represented by polygons attributed with spectral and texture information. The image is represented as a proximity graph with vertices corresponding to the polygons and edges reflecting polygon relations. This is followed by the iterative graph contraction based on Boruvka's Minimum Spanning Tree (MST) construction algorithm. The graph contractions merge the patches based on their pairwise spectral and texture differences. Concurrently with the construction of the irregular image pyramid, structural analysis is done on the agglomerated patches. Man-made object cuing is based on the analysis of shape properties of the constructed patches and their spatial relations. The presented framework can be used as pre-scanning tool for wide area monitoring to quickly guide the further analysis to regions of interest.

97 MATHEMATICS AND COMPUTING↗

Population of anatomically variable 4D XCAT adult phantoms for imaging research and optimization

Purpose: The authors previously developed the 4D extended cardiac-torso (XCAT) phantom for multimodality imaging research. The XCAT consisted of highly detailed whole-body models for the standard male and female adult, including the cardiac and respiratory motions. In this work, the authors extend the XCAT beyond these reference anatomies by developing a series of anatomically variable 4D XCAT adult phantoms for imaging research, the first library of 4D computational phantoms. Methods: The initial anatomy of each phantom was based on chest-abdomen-pelvis computed tomography data from normal patients obtained from the Duke University database. The major organs and structures for each phantom were segmented from the corresponding data and defined using nonuniform rational B-spline surfaces. To complete the body, the authors manually added on the head, arms, and legs using the original XCAT adult male and female anatomies. The structures were scaled to best match the age and anatomy of the patient. A multichannel large deformation diffeomorphic metric mapping algorithm was then used to calculate the transform from the template XCAT phantom (male or female) to the target patient model. The transform was applied to the template XCAT to fill in any unsegmented structures within the target phantom and to implement the 4D cardiac and respiratory models in the new anatomy. Each new phantom was refined by checking for anatomical accuracy via inspection of the models. Results: Using these methods, the authors created a series of computerized phantoms with thousands of anatomical structures and modeling cardiac and respiratory motions. The database consists of 58 (35 male and 23 female) anatomically variable phantoms in total. Like the original XCAT, these phantoms can be combined with existing simulation packages to simulate realistic imaging data. Each new phantom contains parameterized models for the anatomy and the cardiac and respiratory motions and can, therefore, serve as a jumping point from which to create an unlimited number of 3D and 4D variations for imaging research. Conclusions: A population of phantoms that includes a range of anatomical variations representative of the public at large is needed to more closely mimic a clinical study or trial. The series of anatomically variable phantoms developed in this work provide a valuable resource for investigating 3D and 4D imaging devices and the effects of anatomy and motion in imaging. Combined with Monte Carlo simulation programs, the phantoms also provide a valuable tool to investigate patient-specific dose and image quality, and optimization for adults undergoing imaging procedures.

60 APPLIED LIFE SCIENCES↗

SU-E-T-191: First Principle Calculation of Quantum Yield in Photodynamic Therapy

Purpose: We present a first-principle method to calculate the spin transfer efficiency in oxygen induced by any photon fields especially in MeV energy range. The optical pumping is mediated through photosensitizers, e.g., porphyrin and/or ensemble of quantum dots. Methods: Under normal conditions, oxygen molecules are in the relatively non-reactive triplet state. In the presence of certain photosensitizer compounds such as porphyrins, electromagnetic radiation of specific wavelengths can excite oxygen to highly reactive singlet state. With selective uptake of photosensitizers by certain malignant cells, photon irradiation of phosensitized tumors can lead to selective killing of cancer cells. This is the basis of photodynamic therapy (PDT). Despite several attempts, PDT has not been clinically successful except in limited superficial cancers. Many parameters such as photon energy, conjugation with quantum dots etc. can be potentially combined with PDT in order to extend the role of PDT in cancer management. The key quantity for this optimization is the spin transfer efficiency in oxygen by any photon field. The first principle calculation model presented here, is an attempt to fill this need. We employ stochastic density matrix description of the quantum jumps and the rate equation methods in quantum optics based on Markov/Poisson processes and calculate time evolution of the population of the optically pumped singlet oxygen. Results: The results demonstrate the feasibility of our model in showing the dependence of the optical yield in generating spin-singlet oxygen on the experimental conditions. The adjustable variables can be tuned to maximize the population of the singlet oxygen hence the efficacy of the photodynamic therapy. Conclusion: The present model can be employed to fit and analyze the experimental data and possibly to assist researchers in optimizing the experimental conditions in photodynamic therapy.

60 APPLIED LIFE SCIENCES↗

A constitutive model for sheared dense suspensions of rough particles

In a concentrated suspension, particles come into contact due to the presence of asperities on their surfaces. As a result, the contact forces and interparticle friction become one of the important factors governing the rheology of rigid particle suspensions at high concentrations. We show that a load-dependent friction model can be used to reproduce the experimentally observed shear thickening [ST—continuous and discontinuous (DST)] behavior with an increase in the asperity size. Increasing the particle surface roughness size leads to a decrease in the critical shear rate above which shear-thickening takes place, a reduction in the critical volume fraction for DST and an increase in the viscosity jump across non-shear-thickened to shear-thickened regime. In this paper, we propose a constitutive model to quantify the effect of increasing the roughness size on the rheology of dense ST suspensions as well as on the critical shear rate for ST and the critical volume fraction for DST. We fit this model to our simulation data for stress controlled shear flow of dense rough particle suspensions. Once the fitting is complete, these equations are used to predict exact volume fractions and shear stress values for transitions between three regimes on the shear stress-shear rate flow state diagram for different roughness values. Furthermore, the results of this study can be used to tune the particle surface roughness for manipulating the dense suspension rheology according to different applications.

42 ENGINEERING↗

Microsecond dynamics control the HIV-1 Envelope conformation

The HIV-1 Envelope (Env) glycoprotein facilitates host cell fusion through a complex series of receptor-induced structural changes. Although remarkable progress has been made in understanding the structures of various Env conformations, microsecond timescale dynamics have not been studied experimentally. Here, we used time-resolved, temperature-jump small-angle x-ray scattering to monitor structural rearrangements in an HIV-1 Env SOSIP ectodomain construct with microsecond precision. In two distinct Env variants, we detected a transition that correlated with known Env structure rearrangements with a time constant in the hundreds of microseconds range. A previously unknown structural transition was also observed, which occurred with a time constant below 10 μs, and involved an order-to-disorder transition in the trimer apex. Using this information, we engineered an Env SOSIP construct that locks the trimer in the prefusion closed state by connecting adjacent protomers via disulfides. Our findings show that the microsecond timescale structural dynamics play an essential role in controlling the Env conformation with impacts on vaccine design.

59 BASIC BIOLOGICAL SCIENCES↗

Improving photosynthesis and crop productivity by accelerating recovery from photoprotection

Crop leaves in full sunlight dissipate damaging excess absorbed light energy as heat. When sunlit leaves are shaded by clouds or other leaves, this protective dissipation continues for many minutes and reduces photosynthesis. Calculations have shown that this could cost field crops up to 20% of their potential yield. Here, we describe the bioengineering of an accelerated response to natural shading events in Nicotiana (tobacco), resulting in increased leaf carbon dioxide uptake and plant dry matter productivity by about 15% in fluctuating light. Because the photoprotective mechanism that has been altered is common to all flowering plants and crops, the findings provide proof of concept for a route to obtaining a sustainable increase in productivity for food crops and a much-needed yield jump.

59 BASIC BIOLOGICAL SCIENCES↗

Resonant diffraction of synchrotron radiation in rubidium dihydrophosphate crystals

Purely resonant Bragg reflections 006, 55bar 0, and 666 in a rubidium dihydrophosphate (RbH{sub 2}PO{sub 4}) crystal at the K edge of rubidium have been experimentally and theoretically investigated. These reflections remain forbidden when the resonant dipole-dipole (E1E1) contribution to the resonant atomic factor is taken into account; they may be due to the dipole-quadrupole (E1E2) transitions as well as to the anisotropy atomic factor, which is caused by thermal atomic displacements (thermally induced contribution) and/or local jumps of hydrogen atoms. A numerical simulation showed that, at room temperature (experimental conditions), the thermally induced contribution to the 'forbidden' reflections is dominant.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simulation of ion transport in layered cuprate La{sub 2}SrCu{sub 2}O{sub 6}

Oxygen diffusion in layered cuprate La{sub 2}SrCu{sub 2}O{sub 6} has been simulated by the molecular dynamics method in the temperature range of 300-2500 K. The lattice is found to transform at temperatures above 1550 K; this transformation is accompanied by a change in the pair correlation functions. The abrupt change in the oxygen diffusion coefficient in the range of 1500-1550 K may indicate the presence of a phase transition to the superionic state. The motion of oxygen anions could be traced at the microscopic level. It has been proven for the first time that the La{sub 2}SrCu{sub 2}O{sub 6} crystal lattice allows, along with displacements of O1 ions within the CuO{sub 2} layer, their migration from the crystallographic positions to the intermediate unoccupied O3 positions. The motion of O2 anions is also fairly complicated: they move not only in their layer over the O2 positions but they also jump to the neighboring layer to occupy the O1 positions. The oxygen diffusion coefficient in layered cuprate La{sub 2}SrCu{sub 2}O{sub 6} exceeds that in cuprates with perovskite structure and structure of the K{sub 2}NiF{sub 4} type (at the same temperatures), which indicates that this material has good prospects for electrodes with mixed ionic-electronic conductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Inelastic magnetic scattering of polarized neutrons by a superconducting ring

The inelastic scattering of cold neutrons by a ring leads to quantum jumps of a superconducting current which correspond to a decrease in the fluxoid quantum number by one or several units while the change in the ring energy is transferred to the kinetic energy of the scattered neutron. The scattering cross sections of transversely polarized neutrons have been calculated for a thin type-II superconductor ring, the thickness of which is smaller than the field penetration depth but larger than the electron mean free path.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elastic properties of crystalline and liquid gallium at high pressures

The elastic properties of gallium, such as the bulk modulus B, the shear modulus G, and the Poisson's ratio {sigma}, are investigated and the relative change in the volume is determined in the stability regions of the Ga I, Ga II, and liquid phases at pressures of up to 1.7 GPa. The observed lines of the Ga I-Ga II phase transition and the melting curves of the Ga I and Ga II phases are in good agreement with the known phase diagram of gallium; in this case, the coordinates of the Ga I-Ga II-melt triple point are determined to be 1.24 {+-} 0.40 GPa and 277 {+-} 2 K. It is shown that the Ga I-Ga II phase transition is accompanied by a considerable decrease in the moduli B (by 30%) and G (by 55%) and an increase in the density by 5.7%. The Poisson's ratio exhibits a jump from typically covalent values of approximately 0.22-0.25 to values of approximately 0.32-0.33, which are characteristic of metals. The observed behavior of the elastic characteristics is described in the framework of the model of the phase transition from a 'quasi-molecular' (partially covalent) metal state to a 'normal' metal state. An increase in the Poisson's ratio in the Ga I phase from 0.22 to 0.25 with an increase in the pressure can be interpreted as a decrease in the degree of covalence, i.e., the degree of spatial anisotropy of the electron density along the bonds, whereas the large value of the pressure derivative of the bulk modulus (equal to approximately 8) observed up to the transition to the Ga II phase or the melt is associated not only with the quasicovalent nature of the Ga I phase but also with the structural features. In view of the presence of seven neighbors for each gallium atom in the Ga I phase, the gallium lattice can be treated as a structure intermediate between typical open-packed and close-packed structures. Premelting effects, such as a flattening of the isothermal dependence of the shear modulus G(p) with increasing pressure and an increase in the slope of the isobaric dependences G(T) with increasing temperature, are revealed in the vicinity of the melting curve. The bulk modulus of liquid gallium near the melting curve proves to be rather close to the corresponding values for the normal metal Ga II.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase diagram of the helical structure of a two-subsystem frustrated antiferromagnet

The expansion of the thermodynamic potential for the two-subsystem antiferromagnet with frustrated intersubsystem isotropic exchange is obtained. It is demonstrated that this expansion contains the first derivatives with respect to the antiferromagnetic vectors of the subsystems, i.e., the Lifshitz invariant. The equation for the temperature-field boundary of the helical phase for the two-subsystem frustrated antiferromagnet is derived by linearizing the variational equations for the minimum free energy within the mean-field approximation. Relationships are obtained for the critical field at T = 0, the angle of canting of moments of the antiferromagnetic sublattices, and the temperature of spontaneous appearance of helical ordering in the absence of an external field. It is revealed that there is a second higher temperature of formation of the helical magnetic structure induced by the magnetic field with the wave vector of the helix nonmonotonically depending on the external field. The phase boundary of the helical phase and the temperature dependence of the orientation of moments of the magnetic subsystem with weak exchange interaction are determined using numerical minimization of the free energy. It is shown that the transition to the commensurate phase is a first-order transition with a small magnetization jump. A comparative analysis of models with different spatial displacements of ions in the subsystems along the direction of the vector of the helical structure is performed. A criterion is proposed for the choice of the direction of the vector of the incommensurate magnetic structure.

36 MATERIALS SCIENCE↗

Magnetic anisotropy and magnetoelectric properties of Tb{sub 1-x}Er{sub x}Fe{sub 3}(BO{sub 3}){sub 4} ferroborates

Magnetic and magnetoelectric properties of ferroborate single crystals with complex composition (Tb{sub 1-x}Er{sub x}Fe{sub 3}(BO{sub 3}){sub 4}, x = 0, 0.75) and with competing exchange Tb-Fe and Er-Fe interactions are investigated. Jumps in electric polarization, magnetostriction, and magnetization are observed as a result of spin-flop transitions, as well as a considerable decrease in the critical field upon an increase in the Er concentration, in a field H{sub c} parallel to the c axis. The observed behavior of phase-transition fields is analyzed and explained using a simple model taking into account anisotropy in g factors and exchange splitting of funda-mental doublets of the easy-axis Tb{sup 3+} ion and easy-plane Er{sup 3+} ion. It is established that magnetoelectric and magnetostriction anomalies under spin-flop transitions are mainly controlled by the Tb subsystem. The Tb subsystem makes a nonmonotonic contribution {Delta}P{sub a}(H{sub a}, T) to polarization along the a axis: the value of {Delta}P{sub a} reverses its sign and increases with temperature due to the contribution from the excited states of the Tb{sup 3+} ion.

36 MATERIALS SCIENCE↗

Macroscopic description of a subdiffusion-controlled bimolecular reaction

The random trap model is used to derive equations describing reaction-subdiffusion systems with diffusion-controlled (infinitely fast) bimolecular reaction. A hierarchy of equations in terms of distribution functions is closed by using a quasi-equilibrium condition in the equation for the two-particle distribution function. The reaction terms in the resulting equations contain products between concentrations and diffusion jump rates, rather than products of concentrations as dictated by the law of mass action. The same equations are also derived in the framework of a nonlinear continuous-time random walk model. The equations are used to show that inhomogeneity of the medium may manifest itself by fractional-order reaction terms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of the lanthanum deficit on electrical resistivity and heat capacity of silver-doped lanthanum manganites La{sub 1-x}Ag{sub y}MnO{sub 3}

The electrical resistivity and heat capacity of the silver-doped lanthanum manganites La{sub 0.80}Ag{sub 0.15}MnO{sub 3} and La{sub 0.85}Ag{sub 0.15}MnO{sub 3} have been investigated. Despite the nonstoichiometry of the composition, the La{sub 0.80}Ag{sub 0.15}MnO{sub 3} manganite exhibits a bulk homogeneity and better physical properties from the applied point of view as compared to the La{sub 0.85}Ag{sub 0.15}MnO{sub 3} manganite, viz., the former compound has a higher spontaneous magnetoresistance and a larger jump of the heat capacity with a small width of the phase transition, and the anomalies of the heat capacity and electrical resistivity in the vicinity of the Curie point of this compound agree with the fluctuation nature of the second-order phase transition. The behavior of the properties of lanthanum-deficient manganites under investigation in the region of the phase transition is consistent with the classical theory of indirect exchange interaction. The behavior of the temperature dependence of the electrical resistivity has been analyzed in terms of two models. One of these models is based on the tunneling of charge carriers between ferrons or polarons, and the other model is based on the polaron hopping conduction. Both approaches lead to consistent results, and their combination has made it possible to estimate the tunneling distance of charge carriers. The origin of the influence of technological parameters characterizing the synthesis of La{sub 1-x}Ag{sub y}MnO{sub 3} ceramic materials on their physical properties has been elucidated.

36 MATERIALS SCIENCE↗

Cluster perturbation theory in Hubbard model exactly taking into account the short-range magnetic order in 2 x 2 cluster

The cluster perturbation theory is presented in the 2D Hubbard model constructed using X operators in the Hubbard-I approximation. The short-range magnetic order is taken into account by dividing the entire lattice into individual 2 x 2 clusters and solving the eigenvalue problem in an individual cluster using exact diagonalization taking into account all excited levels. The case of half-filling taking into account jumps between nearest neighbors is considered. As a result of numerical solution, a shadow zone is discovered in the quasiparticle spectrum. It is also found that a gap in the density of states in the quasiparticle spectrum at zero temperature exists for indefinitely small values of Coulomb repulsion parameter U and increases with this parameter. It is found that the presence of this gap in the spectrum is due to the formation of a short-range antiferromagnetic order. An analysis of the temperature evolution of the density of states shows that the metal-insulator transition occurs continuously. The existence of two characteristic energy scales at finite temperatures is demonstrated, the larger scale is associated with the formation of a pseudogap in the vicinity of the Fermi level, and the smaller scale is associated with the metal-insulator transition temperature. A peak in the density of states at the Fermi level, which is predicted in the dynamic mean field theory in the vicinity of the metal-insulator transition, is not observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗