Grain boundary segregation for the Fe-P system: Insights from atomistic modeling and Bayesian inference
Not Available
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Grain boundary (GB) motion away from the center of curvature, termed anti-curvature behavior, has recently been observed in 3D experiments but is not predicted by classical grain growth theory. In this study, we investigate this behavior using a novel, fully anisotropic Monte Carlo Potts (MCP) model that incorporates both misorientation and inclination dependencies of GB energy. We perform 3D grain growth simulations with isotropic and anisotropic GB energies to explore the relationship between GB velocity and curvature. Contrary to the classical relation that velocity is a product of reduced mobility and mean curvature, we observe no consistent correlation between velocity and mean curvature for individual GBs, even under isotropic conditions, though there is correlation between the average velocity and curvature for some cases. The 3D simulations exhibit frequent anti-curvature motion regardless of GB energy anisotropy including with isotropic GBs, though larger curvatures occur with anisotropic GB energy functions that promote low-energy GBs. In 2D simulations, anti-curvature behavior only occurs with the anisotropic functions that favor low-energy GBs. This difference between 2D and 3D results suggests that anti-curvature behavior results in part from the increased freedom of motion intrinsic in 3D GB networks. Furthermore, our results support recent experimental observations that demonstrate that simple curvature-driven models are insufficient for describing GB migration in polycrystals.
Understanding the evolution of dislocation structures during plastic deformation is critical for predicting the mechanical performance of metallic materials. In this work, we applied in situ scanning electron microscopy/electron backscatter diffraction tensile testing combined with multifractal (MF) analysis to assess deformation-induced dislocation structure evolution in solution-annealed 304 L stainless steel, both in its as-received and neutron-irradiated states (5.4 displacements per atom). The analysis of kernel average misorientation patterns revealed the formation of hierarchical dislocation arrangements that exhibit clear MF scaling behavior. Despite pronounced visual differences between nonirradiated and irradiated specimens—most notably, the appearance of dislocation channels after irradiation—the singularity spectra suggest that both conditions give rise to similar underlying hierarchical structures. MF analysis provides a quantitative measure of the spatial complexity and self-organization of dislocation patterns, highlighting the accelerated emergence and evolution of the dislocation structures in irradiated polycrystalline materials, as well as the limitation of their spatial extent. The findings indicate that irradiation not only modifies microstructure but also alters correlation-driven dislocation organization. More generally, they demonstrate that MF analysis is a powerful tool for probing mesoscale deformation mechanisms.
Not Available
Ultrasonic atomization is one of the promising technologies for producing metal powders for additive manufacturing, where precise control of particle size and morphology is essential. In this study, we coupled an ultrasonic transducer with a carbon fiber plate and atomized liquid droplets and films under different vibration amplitudes. Water, glycerol, and pure aluminum melt were used to study the atomization mechanism and the resulting droplet/powder characteristics, respectively. High-speed optical and ultrafast synchrotron X-ray imaging were used to study in situ the ultrasonic atomization dynamics, including pulsation and clustering of cavities inside the liquid layer/films, development of capillary waves, and formation of liquid droplets. For the first time, we observed and captured the occurrence of cavitation during the atomization of resting drops, films and impact droplets. The inertial cavitation events interfered with the capillary waves across the interphase boundary, puncturing and breaking the boundary to produce atomized mist. The in situ observation revealed the intricate dynamics of ultrasonic atomization and underscored the pivotal role of cavitation events throughout the entire atomization process. We also conducted experiments on ultrasonic atomization of liquid aluminum, producing particles of perfectly spherical shape. The particle size tended to decrease with reduced vibration amplitude Our work has demonstrated the important processing strategies on how to tailor the particle size while ensuring consistent particle shape and morphology, which is the key processing capability for producing high quality powders for additive manufacturing applications.
How and what soil fauna influence the soil organic matter (SOM) decomposition rate (Rs) and its temperature sensitivity (Q 10 ) have been largely ignored, although this is a crucial matter, especially under the scenario of global change. Further, in this study, a novel approach was adopted with a continuous changing-temperature incubation (daytime, from 7 °C to 22 °C; nighttime, from 22 °C to 7 °C) with rapid and continuous measurement, to examine the effect of soil macrofauna (specifically, earthworms) on Rs and Q 10 with three densities (no addition, low density, and high density). According to the results, the earthworms accelerated Rs. Furthermore, Rs with earthworm addition had a symmetrical pattern during daytime and nighttime cycles, which is contrary to traditional soil incubation, with only soil microbe as asymmetrical. More importantly, earthworm addition increased Q 10 markedly, ranging from 48% to 67%. Overall, the findings highlight the pivotal role of earthworms as soil macrofauna that regulating soil carbon release, and their effects should be integrated into process-based ecological models in future.
Flash droughts (FD), rapidly emerging in a warming future, disrupt ecosystems, agriculture, and water security. Ecosystem water use efficiency (WUE), the ratio of gross primary production (GPP) to actual evapotranspiration (AET), balances carbon assimilation and water loss. FD rapidly disrupts this balance, making WUE critical for assessing plant stress and recovery. Here, this study investigates the dynamics of landscape-scale WUE, and the components of GPP and AET under FD utilizing both observed data from the Missouri Ozark AmeriFlux site (US-MOz) and version 2 of the U.S. Department of Energy’s Earth, Energy, Exascale System Model (E3SM) Land Model (ELMv2). Observations and simulations reveal GPP as dominant for WUE during earlier FD events (2005, 2007, 2012), shifting to AET in recent events (2014, 2018). This agreement indicates that the ELM can capture the shifting dynamics of GPP and AET in regulating WUE under FD conditions. However, the ELM systematically underestimates both GPP and AET and does so in a manner that does not preserve their ratio. As a result, WUE is also underestimated, suggesting that GPP is more strongly underestimated than AET. Furthermore, the ELM also underestimates the speed of GPP recovery, producing an artificially prolonged GPP recovery time following FD events. Observed environmental drivers such as vapor pressure deficit (VPD), soil moisture (SM), and predawn leaf water potential (PLWP) effectively predict WUE, but ELM primarily highlights SM, underestimating VPD’s role. This study demonstrates that relying solely on soil moisture fails to capture the rapid hydraulic recovery observed in PLWP, underscoring the necessity of integrating plant hydraulics into land surface models to improve flash drought predictability.
Not Available
Highlights: • Truly quantum calculation of optical properties in superlattices. • An approach that goes beyond the abilities of the current approaches in the literature. • Accurate calculations based on bona fide superlattice eigenvalues and eigenfunctions. • Accurate calculation of optical-transition matrix elements and new selection rules. • Optical spectra of AlGaAs and InGaN superlattices agree with experimental results. • Optical spectra features of blue diodes faithfully reproduced and fully explained. • Unexplained lines in high-resolution spectra assigned to surface and edge states. - Abstract: Using the genuine superlattice eigenvalues and eigenfunctions, and their parity symmetries, new transition selection rules are derived, and a novel approach for the explicit calculation of the optical spectra of periodic structures presented. The optical response and infrared spectra published in the last 40 years for (In, Ga)N and (Al, Ga)As superlattices, with different number of unit cells n (varying from ∼10 to ∼400) and barrier and valley widths in the range of 2.5 nm to 40 nm, and different properties have been revisited. Among the various examples discussed here, we study the narrow peaks clustered in groups reported in high resolution spectra of blue-emitting devices, that could not be explained until now. These properties are faithfully reproduced and fully understood. We show that these effects are related to and depend on the surface energy levels and their tuneable detachment. We shown also that the optical transitions experimentally observed, but forbidden by the current optical physics, are really allowed transitions. Since the number of energy eigenvalues E{sub μ,ν}{sup r,v} and eigenfunctions Ψ{sub μ{sup ′},ν{sup ′r,v}}(z) is now much greater, the number of allowed matrix-elements can be extremely large (of the order of n{sup 2} n{sub c}n{sub v}∕2, with n{sub c} and n{sub v} the number of subbands in the conduction and valence bands). We show that this number can be reduced by using the eigenfunctions’ symmetries, which are behind the parity symmetry selection rules and the leading order selection rules. These rules reduce the number of matrix-elements evaluations from ∼n{sup 2}n{sub c}n{sub v}∕2 to ∼nn{sub c}n{sub v}∕2, i.e., depending on the superlattice, from about 1000 to 100. We discuss also a third rule, that collects the contributions of the surface and edge states, reducing the number of transitions even more to N{sub s}≤n{sub c}n{sub v}. With these rules, the main peaks are conserved and their number practically matches that of the real spectrum. Excellent agreements are found with experimental results.
In this work, we focus on the stability and bulk/surface structural properties of the Ruddlesden-Popper phase La 2 NiO 4 and their consequences for dry reforming of methane (DRM) activity. Fuelled by the appearance as a crucial intermediate during in situ decomposition of highly DRM-active LaNiO3 perovskite structures, we show that La 2 NiO 4 can be equally in situ decomposed into a Ni/La 2 O 3 phase offering CO 2 capture and release necessary for DRM activity, albeit at much higher temperatures compared to LaNiO 3 . Decomposition in hydrogen also leads to an active Ni/La 2 O 3 phase. In situ X-ray diffraction during DRM operation reveals considerable coking and encapsulation of exsolved Ni, yielding much smaller Ni crystallites compared to on LaNiO 3 , where coking is virtually absent. Additionally, generalizing the importance of intermediate Ruddlesden-Popper phases, the in situ decomposition of La-based perovskite structures yields several obstacles due to the high stability of both the parent perovskite and the Ruddlesden-Popper structures and the occurrence of parasitic structures.
Tungsten carbide modified nickel (Ni-WC/C) catalyst is synthesized through the sequential impregnation method and evaluated for the electrooxidation of urea in alkaline electrolyte. Both the activity and stability of Ni are enhanced by the introduction of WC. In situ Fourier transform infrared (FTIR) measurements combined with electrochemical analysis were used to provide a better understanding of the mechanism for urea electrooxidation on the Ni-based catalysts. The formation of CO 2 and NCO – species is detected during urea oxidation, and the synergistic effect resulting from the interaction of Ni and WC is also proposed. The Ni-WC/C electrode contributes to the improved C–N bond cleavage in urea than that on Ni/C, resulting in a higher activity. Furthermore, the introduction of WC also enhances the anti-poisoning ability, thus promoting more complete oxidation of urea to produce CO 2 , which leads to a higher energy conversion efficiency than that on Ni/C. In conclusion, this work provides a new strategy for designing highly efficient catalysts for urea electrooxidation.
Here, the impacts of Pd poisoning to the activity, selectivity, and hydrothermal stability of Cu/SSZ-13 selective catalytic reduction (SCR) catalysts are reported. Pd lowers DeNOx efficiency of Cu/SSZ-13 via two mechanisms: (1) displacing SCR active sites in the form of isolated Pd-ions, and (2) catalyzing non-selective NH 3 oxidation in the form of PdO. The first mechanism works by the diffusion of isolated Pd-ions into chabazite cages to displace ZCu II OH SCR active species, and it occurs on Cu/SSZ-13 catalysts with and without external surface CuO clusters in similar fashion. In contrast, the second mechanism works differently with and without external surface CuO clusters. For Cu/SSZ-13 catalyst without external CuO clusters (i.e., primarily isolated Cu-ions), PdO leads to significant decrease of DeNOx efficiency at reaction temperatures above ~400°C due to its non-selective NH 3 oxidation activity at high temperatures. However, this poisoning effect becomes much less impactful on Cu/SSZ-13 catalyst containing CuO clusters. This is due to the formation of CuO-PdO solid solution via interactions between CuO and PdO, which reduces non-selective NH 3 oxidation potential. Furthermore, this solid solution formation even mitigates adverse effects caused by hydrothermal aging. Hence, the poisoning effects of Pd are closely related to Cu speciation and spatial distribution of a Cu/SSZ-13 catalyst. Finally, this study suggests a strategy in eliminating Pd poisoning, that is, the introduction of an oxide phase that effectively traps PdO but does not adversely influence SCR.
Here, the present contribution provides clarity to N 2 O formation mechanisms and key influencing factors during low temperature NH 3 -SCR, with the goal of enabling the rational design of advanced SCR catalysts with low greenhouse gas impact. By studying more than 50 small pore Cu-exchanged zeolite SCR catalyst samples, including model catalysts synthesized in our laboratories and state-of-the-art industrial catalysts, we explored a wide range of factors affecting N 2 O formation. These factors included Cu loading, support Si/Al ratio, support topology, catalyst aging, reaction temperature and reactant feed composition effects. We probed N 2 O formation under both steady-state SCR, and during NH 4 NO 3 decomposition via temperature programmed desorption (TPD). Finally, we used DFT to probe energetics of possible N 2 O formation pathways. Based on these studies, we confirm that low temperature N 2 O formation occurs via multiple reaction pathways that all involve NH 4 NO 3 and are supported by Cu moieties that facilitate in-situ NO oxidation to NO 2 .
Using portfolio analysis and individual detailed case studies, we studied the energy performance and drivers of energy use in 51 high-performance office buildings in the U.S., Europe, China, and other parts of Asia. Portfolio analyses revealed that actual site energy use intensity (EUI) of the study buildings varied by a factor of as much as 11, indicating significant variation in real energy use in HPBs worldwide. Nearly half of the buildings did not meet the American Society of Heating, Refrigerating, and Air Conditioning Engineers (ASHRAE) Standard 90.1-2004 energy target, raising questions about whether a building’s certification as high performing accurately indicates that a building is energy efficient and suggesting that improvement in the design and operation of HPBs is needed to realize their energy-saving potential. We studied the influence of climate, building size, and building technologies on building energy performance and found that although all are important, none are decisive factors in building energy use. EUIs were widely scattered in all climate zones. There was a trend toward low energy use in small buildings, but the correlation was not absolute; some small HPBs exhibited high energy use, and some large HPBs exhibited low energy use. We were unable to identify a set of efficient technologies that correlated directly to low EUIs. In two case studies, we investigated the influence of occupant behavior as well as operation and maintenance on energy performance and found that both play significant roles in realizing energy savings. We conclude that no single factor determines the actual energy performance of HPBs, and adding multiple efficient technologies does not necessarily improve building energy performance; therefore, an integrated design approach that takes account of climate, technology, occupant behavior, and operations and maintenance practices should be implemented to maximize energy savings in HPBs. As a result, these findings are intended to help architects, engineers, operators, and policy makers improve the design and operation of HPBs.
Microgrids have garnered attention in recent years as a way to increase the reliability of the grid, increase the reliability of electricity service to customers, adapt to an increasing percentage of intermittent renewable generation, and serve both customer critical loads and the needs of adjacent communities in the case of emergencies such as natural disasters. One barrier to microgrids is the historic cost and lack of standardization associated with microgrid controllers. To reduce this cost and address standardization, specifications for a Generic Microgrid Controller (GMC) were developed with the goal to facilitate the design and ease of adaptation of microgrid controllers to various microgrids of different sizes and with different resources. A GMC must address two core functions, Transition and Dispatch, as well as several optional higher level functions such as economic dispatch, and renewable and load forecasting. The GMC specifications were demonstrated and evaluated using a commercial simulation platform for two different microgrids, a 20MW-Class community microgrid and a 10MW-Class medical center microgrid. For each microgrid, the GMC was tested in hardware-in-the-loop (HIL) using an OPAL-RT real-time digital simulator, and the two core functions were assessed. The results established that (1) the GMC is successful in seamlessly transitioning the microgrids to and from an islanded mode, (2) a load/generation mismatch at the time of separation depends on the microgrid configuration and must be lower than a specific value determined by simulation testing, and (3) the GMC Dispatch Function response is acceptable in maintaining, in the islanded mode, 60Hz for a range of load changes.
The electrochemical performance and cycle life of lithium-ion batteries (LIBs) depend on the electrochemical, chemical, and mechanical behavior of electrodes and electrolytes. Despite extensive studies conducted previously, challenges exist to decouple these behaviors, capture the evolution of electro-chemo-mechanical behavior in realistic conditions, and correlate atomic-scale stress evolution to micro-scale bulk mechanical degradation. Here, we report multiscale operando techniques to investigate polydisperse battery electrodes by integrating volume-averaged quantitative synchrotron X-ray scattering with high-resolution transmission X-ray microscopy (TXM). The former provides us information spanning a wide spatial range, from Angstrom-level atomic structures to micrometer-level particle scales, while the latter provides time-resolved 2D images of the particles during cycling. The complementarity of the two operando techniques is demonstrated by an over-lithiation test of LiCoO 2 electrodes, where particles crack and eventually pulverize. Additionally, the techniques are applied to study LiCoO 2 cycling stability from 3.0 V to 4.5 V. Operando X-ray scattering result shows nanometer-scale features keep forming in LiCoO 2 electrodes during cycling, resulting in an increased projected area observed by the TXM experiment. The formation of such features is inhibited by a polymer coating on the electrode, leading to vastly improved cycling stability. The polymer coating alleviates LiCoO 2 surface deterioration, reduces side product generation, and inhibits LiCoO 2 particles volume expansion during the cycling test. These operando multimodal X-ray techniques presented herein thus offer a novel, multiscale diagnostic modality for studying existing and emerging battery materials, aiding the development of next-generation LIBs.
Assessing and maintaining resource adequacy (RA) is a core pillar of power systems. However, recent changes in the physical makeup of these systems and the conditions under which these systems must operate have yielded a renewed interest in the methods, metrics, and assumptions that underpin RA assessments. In this paper, we systematically explore a wide range of RA modeling dimensions, including: the objective function and level of operational detail in the underlying model formulation; the quantity (look-ahead) and quality (accuracy) of data that is available for making operational decisions within those models; and the physical configuration of solar photovoltaics (PV) with battery storage hybrid resources. We apply a set of probabilistic RA tools and production cost modeling tools to a realistic test system based loosely on a future Electric Reliability Council of Texas power system dominated by solar PV resources. Under the assumptions of our system and models, we find that multi-stage probabilistic assessments may provide a more robust evaluation of RA by capturing a wider range of operational and system interactions, but this comes at a computational cost of 1-2 orders of magnitude longer run time depending on the specific configuration. In addition, the information on thermal generator availability impacts RA performance by an order of magnitude more than solar resource forecasts, which is driven by the comparatively larger magnitude of thermal outages than solar forecast errors within our test system. Lastly, the flexibility provided by hybrid and other resources can help reduce system load-shedding event frequencies and enable the system to be more robust to inaccurate forecast information, and alternative hybrid inverter sizes can impact RA levels by 1-2 orders of magnitude. Our results point to the importance of a broader flexibility framework to describe the interaction between (1) flexibility "supply" from both physical resource capabilities and operational constraints considered in the modeling, and (2) flexibility "demand" from forecast errors, thermal generator outages, and other sources of uncertainty, as well as their RA impacts. Results are likely sensitive to the system buildout explored; future work could consider additional system configurations and conditions.