Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hg”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Unsaturated Sulfur Crown Ethers Can Extract Mercury(II) and Show Promise for Future Copernicium(II) Studies: A Combined Experimental and Computational Study

The unsaturated hexathia-18-crown-6 (UHT18C6) molecule was investigated for the extraction of Hg(II) in HCl and HNO3 media. This extractant can be directly compared to the recently studied saturated hexathia-18-crown-6 (HT18C6). The default conformation of the S lone pairs in UHT18C6 is endodentate, where the pocket of the charge density, according to the crystal structures, is oriented toward the center of the ring, which should allow better extraction for Hg(II) compared to the exodentate HT18C6. Batch study experiments showed that Hg(II) had better extraction at low acid molarity (ca. 99% in HCl and ca. 95% in HNO 3 ), while almost no extraction was observed above 0.4 M HCl and 4 M HNO 3 (<5%). Speciation studies were conducted with the goal of delineating a plausible extraction mechanism. Density functional theory calculations including relativistic effects were carried out on both Hg(II)-encapsulated HT18C6 and UHT18C6 complexes to shed light on the binding strength and the nature of bonding. Our calculations offer insights into the extraction mechanism. In addition to Hg(II), calculations were performed on the hypothetical divalent Cn(II) ion, and showed that HT18C6 and UHT18C6 could extract Cn(II). Finally, the extraction kinetics were explored to assess whether this crown can extract the short-lived Cn(II) species in a future online experiment.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Rapid Removal of Mercury from Aqueous Solutions Using Thiol Functionalized Zn-doped Biomagnetite Nanoparticles

The surfaces of Zn-doped biomagnetite nanostructured particles were functionalized with (3-mercaptopropyl)trimethoxysilane (MPTMS) and used as a high-capacity and collectable adsorbent for the removal of Hg(II) from water. Fourier transform infrared spectroscopy (FTIR) confirmed the attachment of MPTMS on the particle surface. The crystallite size of the Zn-doped biomagnetite was {approx}17 nm, and the thickness of the MPTMS coating was {approx}5 nm. Scanning transmission electron microscopy and dynamic light scattering analyses revealed that the particles formed aggregates in aqueous solution with an average hydrodynamic size of 826 {+-} 32 nm. Elemental analyses indicate that the chemical composition of the biomagnetite is Zn{sub 0.46}Fe{sub 2.54}O{sub 4}, and the loading of sulfur is 3.6 mmol/g. The MPTMS-modified biomagnetite has a calculated saturation magnetization of 37.9 emu/g and can be separated from water within a minute using a magnet. Sorption of Hg(II) to the nanostructured particles was much faster than other commercial sorbents, and the Hg(II) sorption isotherm in an industrial wastewater follows the Langmuir model with a maximum capacity of {approx}416 mg/g, indicating two -SH groups bonded to one Hg. This new Hg(II) sorbent was stable in a range of solutions, from contaminated water to 0.5 M acid solutions, with low leaching of Fe, Zn, Si, and S (<10%).

36 MATERIALS SCIENCE↗

Copper-doped silica materials silanized with bis-(triethoxy silyl propyl)-tetra sulfide for mercury vapor capture

The use of Cu-S sites for Hg capture from the gas phase has been successfully applied to a silica-based platform using an S4 organic polysulfane and copper sulfate. The maximum fixed-bed equilibrium capacity achieved using these materials was 19 789 {mu}g Hg.g{sup -1} sorbent for a material with 2.5 wt % Cu and 6 wt % S. An optimal S level was determined to be around 3 wt % because enhancement of capacity was only 18% when increasing from this 3 to 6 wt %. The rate of adsorption in pure beds ranged from 0.6 to 1.6 {mu}g Hg.min{sup -1} depending on the inlet concentration. Differences in breakthrough times suggest that material deposition is not uniform. When compared to two other platforms, commercially available Darco HG-LH and previously tested Fe-Cu-S4 nanoaggregates, the Si-1 material performed the best in fixed-bed testing. During entrained-flow testing, a steady-state Hg removal of 82% was achieved using Si-1 at injection rates of both 6 x 10{sup -5} and 1.2 x 10{sup -4} g.L{sup -1}.h{sup -1}. The lack of increase in Hg removal when the injection rate is doubled suggests that pore accessibility is the rate-controlling step during dynamic Hg capture. A calculation of the approximate pore usage based on injection testing helped confirm this observation. During injection testing, the performance of Si-1 was only diminished 10% when exposed to 20 ppm SO{sub 3}. This is an encouraging result for flue-gas applications where SO{sub 3} levels range from 1 to 40 ppm. Testing demonstrated that Si-1 is stable when exposed to leaching conditions after concrete blending and cement impregnation. This is an important aspect to consider for injection because the sale of fly ash for concrete is a key cost-recovery tool for power plants. 27 refs., 8 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

Mercury capture from flue gas using palladium nanoparticle-decorated substrates as injected sorbent

Although the Clean Air Mercury Rule (CAMR) was recently vacated by the District of Columbia Court of Appeals, efficient mercury (Hg) capture is still an important topic for the coal-fired power plant industry. Several states have Hg emission regulations that are even more stringent than CAMR guidelines. All coals contain Hg, which is released during combustion. Significant research efforts have been made to capture this toxic element before it is released to the atmosphere where it can stay suspended and travel for great distances. A variety of approaches have been examined, among which the injection of sorbent materials such as powdered activated carbon (PAC) is the current method of choice. The work presented here examined the mercury capture capability of various carbon substrates decorated with metal nanoparticles when injected as sorbents. Sorbent injections were carried out in a Hg in air mixture for laboratory-scale screening and in a real flue gas at a coal-fired power plant. It was found that palladium-decorated carbon substrates showed excellent mercury capture capabilities, with total efficiencies greater than 90% in laboratory-scale tests. In the real flue gas, the total efficiency was on the order of 60%, comparable to the benchmark commercial sorbent Darco Hg-LH, a brominated PAC, although the tested adsorbents had much lower surface areas. The results of this study are presented herein. Novel mercury capture from a coal-fired flue gas was achieved using carbon substrates decorated with palladium nanoparticles. 15 refs., 7 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Effects of HCl and SO{sub 2} concentration on mercury removal by activated carbon sorbents in coal-derived flue gas

The effect of the presence of HCl and SO{sub 2} in the simulated coal combustion flue gas on the Hg{sup 0} removal by a commercial activated carbon (coconut shell AC) was investigated in a laboratory-scale fixed-bed reactor in a temperature range of 80-200{sup o}C. The characteristics (thermal stability) of the mercury species formed on the sorbents under various adsorption conditions were investigated by the temperature-programmed decomposition desorption (TPDD) technique. It was found that the presence of HCl and SO{sub 2} in the flue gas affected the mercury removal efficiency of the sorbents as well as the characteristics of the mercury adsorption species. The mercury removal rate of AC increased with the HCl concentration in the flue gas. In the presence of HCl and the absence of SO{sub 2} during Hg{sup 0} adsorption by AC, a single Hg{sup 0} desorption peak at around 300{sup o}C was observed in the TPDD spectra and intensity of this peak increased with the HCl concentration during mercury adsorption. The peak at around 300{sup o}C may be derived from the decomposition and desorption of mercury chloride species. The presence of SO{sub 2} during mercury adsorption had an adverse effect on the mercury removal by AC in the presence of HCl. In the presence of both HCl and SO{sub 2} during Hg{sup 0} adsorption by AC, the major TPDD peak temperatures changed drastically depending upon the concentration of HCl and SO{sub 2} in flue gas during Hg{sup 0} adsorption. 16 refs., 7 figs.

01 COAL, LIGNITE, AND PEAT↗

Tree foliage as a net accumulator of highly toxic methylmercury

Tree canopies are known to elevate atmospheric inputs of both mercury (Hg) and methylmercury (MeHg). While foliar uptake of gaseous Hg is well documented, little is known regarding the temporal dynamics and origins of MeHg in tree foliage, which represents typically less than 1% of total Hg in foliage. In this work, we examined the foliar total Hg and MeHg content by following the growth of five individual trees of American Beech (Fagus grandifolia) for one growing season (April–November, 2017) in North Carolina, USA. We show that similar to other studies foliar Hg content increased almost linearly over time, with daily accumulation rates ranging from 0.123 to 0.161 ng/g/day. However, not all trees showed linear increases of foliar MeHg content along the growing season; we found that 2 out of 5 trees showed elevated foliar MeHg content at the initial phase of the growing season but their MeHg content declined through early summer. However, foliar MeHg content among all 5 trees showed eventual increases through the end of the growing season, proving that foliage is a net accumulator of MeHg while foliar gain of biomass did not “dilute” MeHg content.

54 ENVIRONMENTAL SCIENCES↗

Transition between breakdown regimes in a temperature-dependent mixture of argon and mercury using 100 kHz excitation

The paper examines the breakdown process at 100 kHz in a changing temperature-dependent mixture of Ar and Hg and the associated transitions between breakdown regimes. Each measurement series started at 1400 K, 10 bar of Hg, and 0.05% admixture of Ar and finished by natural cooling at room temperature, 150 mbar of Ar, and 0.01% admixture of Hg. The E/N at breakdown as a function of temperature and gas composition was found to have a particular shape with a peak at 600 K, when Hg makes up for 66% of the gaseous mixture and Ar 34%. This peak was found to be an effect of the mixture itself, not the temperature effects or the possible presence of electronegative species. The analysis has shown that at this frequency both streamer and diffuse breakdown can take place, depending on the temperature and gas composition. Streamer discharges during breakdown are present at high temperatures and high Hg pressure, while at room temperature in 150 mbar of Ar the breakdown has a diffuse nature. In between those two cases, the radius of the discharges during breakdown was found to change in a monotonic manner, covering one order of magnitude from the size typical for streamer discharges to a diffuse discharge comparable to the size of the reactor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A NEARBY GAMMA-RAY BURST HOST PROTOTYPE FOR z {approx} 7 LYMAN-BREAK GALAXIES: SPITZER-IRS AND X-SHOOTER SPECTROSCOPY OF THE HOST GALAXY OF GRB 031203

Gamma-ray burst (GRB) host galaxies have been studied extensively in optical photometry and spectroscopy. Here we present the first mid-infrared spectrum of a GRB host, HG 031203. It is one of the nearest GRB hosts at z = 0.1055, allowing both low- and high-resolution spectroscopy with the Spitzer Infrared Spectrograph (IRS). Medium-resolution UV to K-band spectroscopy with the X-shooter spectrograph on the Very Large Telescope is also presented, along with Spitzer IRAC and MIPS photometry, as well as radio and submillimeter observations. These data allow us to construct a UV to radio spectral energy distribution with almost complete spectroscopic coverage from 0.3 to 35 {mu}m of a GRB host galaxy for the first time, potentially valuable as a template for future model comparisons. The IRS spectra show strong, high-ionization fine structure line emission indicative of a hard radiation field in the galaxy-in particular the [S IV]/[S III] and [Ne III]/[Ne II] ratios-suggestive of strong ongoing star formation and a very young stellar population. The absence of any polycyclic aromatic hydrocarbon emission supports these conclusions, as does the probable hot peak dust temperature, making HG 031203 similar to the prototypical blue compact dwarf galaxy (BCD), II Zw 40. The selection of HG 031203 via the presence of a GRB suggests that it might be a useful analog of very young star-forming galaxies in the early universe, and hints that local BCDs may be used as more reliable analogs of star formation in the early universe than typical local starbursts. We look at the current debate on the ages of the dominant stellar populations in z {approx} 7 and z {approx} 8 galaxies in this context. The nebular line emission is so strong in HG 031203 that at z {approx} 7, it can reproduce the spectral energy distributions of z-band dropout galaxies with elevated IRAC 3.6 and 4.5 {mu}m fluxes without the need to invoke a 4000 A break. Indeed, photometry of HG 031203 shows elevation of the broadband V-magnitude at a level similar to the IRAC elevation in stacked z-band dropouts, solely due to its strong [O III] line emission.

79 ASTRONOMY AND ASTROPHYSICS↗

Scaling mercury biodynamics from individuals to populations: Implications of an herbivorous fish on mercury cycles in streams

Mercury (Hg) is a widespread environmental pollutant anthropogenically released into aquatic ecosystems where it is tightly retained and cycled through a combination of abiotic and biotic processes. The organic form of Hg, Methylmercury (MeHg), binds to organic carbon chains and efficiently bioaccumulates through aquatic food webs to toxic levels in consumers. For these reasons, understanding the transport and fate of mercury, including the role of organisms in these cycles, is important. The premise of the Somatic Growth Dilution (SGD) concept is that bioaccumulation of contaminants will become more dilute within an organism as it displays higher growth efficiency. While multiple studies have substantiated the effects of SGD on reduced MeHg concentrations at the individual level, the implications of SGD to populations and overall food web dynamics is uncertain. Herein, we examined the influence of SGD on total MeHg standing stock and flux in stoneroller ( Campostoma oligolepis ) populations at five sites in East Fork Poplar Creek (EFPC), a stream contaminated by Hg on the Oak Ridge Reservation. We assessed patterns in periphyton and stoneroller MeHg concentrations in relation to relative growth and population density to determine evidence of SGD and density-dependent growth, respectively. We then calibrated a biodynamic model relating MeHg concentration in stonerollers to growth rate, assimilation efficiency, uptake, and elimination of MeHg. Using over 30 years of population data, individual biodynamic models were scaled to the population level to analyze the effects of population density and growth on MeHg standing stock (ug m -2 ) in stoneroller populations and flux (ug m -2 d -1 ) from periphyton communities to stonerollers. We found evidence of both density-dependent and “boom-and-bust” growth patterns for stonerollers in EFPC. In congruence with the SGD concept, sites with higher average relative growth had lower MeHg concentrations. However, total MeHg standing stock and flux was strongly related to population density, irrespective of changing growth patterns. Additionally, higher relative growth was positively related to a higher total MeHg flux. However, the implications of growth on the transfer of MeHg in food webs is complicated and dependent upon population size, age structure, and growth-at-age. Our results also suggest that stonerollers may play significant roles in contaminant cycles in EFPC by mobilizing considerable quantities of Hg, storing significant reservoirs of hg and MeHg, and transferring MeHg to higher trophic levels.

59 BASIC BIOLOGICAL SCIENCES↗

Qualification of the Nippon Instrumentation for use in Measuring Mercury at the Defense Waste Processing Facility

The Nippon Mercury/RA-3000 system installed in 221-S M-14 has been qualified for use. The qualification was a side-by-side comparison of the Nippon Mercury/RA-3000 system with the currently used Bacharach Mercury Analyzer. The side-by-side testing included standards for instrument calibration verifications, spiked samples and unspiked samples. The standards were traceable back to the National Institute of Standards and Technology (NIST). The side-by-side work included the analysis of Sludge Receipt and Adjustment Tank (SRAT) Receipt, SRAT Product, and Slurry Mix Evaporator (SME) samples. With the qualification of the Nippon Mercury/RA-3000 system in M-14, the DWPF lab will be able to perform a head to head comparison of a second Nippon Mercury/RA-3000 system once the system is installed. The Defense Waste Processing Facility (DWPF) analyzes receipt and product samples from the Sludge Receipt and Adjustment Tank (SRAT) to determine the mercury (Hg) concentration in the sludge slurry. The SRAT receipt is typically sampled and analyzed for the first ten SRAT batches of a new sludge batch to obtain an average Hg concentration. This average Hg concentration is then used to determine the amount of steam stripping required during the concentration/reflux step of the SRAT cycle to achieve a less than 0.6 wt% Hg in the SRAT product solids. After processing is complete, the SRAT product is sampled and analyzed for mercury to ensure that the mercury concentration does not exceed the 0.45 wt% limit in the Slurry Mix Evaporator (SME). The DWPF Laboratory utilizes Bacharach Analyzers to support these Hg analyses at this facility. These analyzers are more than 10 years old, and they are no longer supported by the manufacturer. Due to these difficulties, the Bacharach Analyzers are to be replaced by new Nippon Mercury/RA-3000 systems. DWPF issued a Technical Task Request (TTR) for the Savannah River National Laboratory (SRNL) to assist in the qualification of the new systems. SRNL prepared a task technical and quality assurance (TT&QA) plan that outlined the activities that are necessary and sufficient to meet the objectives of the TTR. In addition, TT&QA plan also included a test plan that provided guidance to the DWPF Lab in collecting the data needed to qualify the new Nippon Mercury/RA-3000 systems.

47 OTHER INSTRUMENTATION↗

Reduction of mercury in saturated subsurface sediments and its potential to mobilize mercury in its elemental form (Final report)

The goal of our project was to investigate Hg(II) reduction in the deep subsurface. We focused on microbial and abiotic pathways of reduction and explored how it affected the toxicity and mobility of Hg in this unique environment. The project’s tasks included: 1. Examining the role of mer activities in the reduction of Hg(II) in denitrifying enrichment cultures; 2. Investigating the biotic/abiotic reduction of Hg(II) under iron reducing conditions; 3. Examining Hg(II) redox transformations under anaerobic conditions in subsurface sediments from DOE sites.

54 ENVIRONMENTAL SCIENCES↗

How does Mercury Methylation Respond to Intensive Forest Management and the Creation of Anoxia in Floodplain Soils

This research endeavor, entitled “How does Mercury Methylation Respond to Intensive Forest Management and the Creation of Anoxia in Floodplain Soils?” represents a collaborative effort undertaken by the University of North Carolina at Greensboro, led by Principal Investigator Dr. James S. Coleman, the United States Forest Service Santee Experimental Forest (SEF) Station Director Dr. Carl C. Trettin as Co-Principal Investigator, and The Chinese University of Hong Kong Dr. Martin Tsz-Ki Tsui and Dr. Alex T. Chow serving as Co-Principal Investigators. The overarching objective of this proposed project was to capture and elucidate the immediate and short-term effects of forest disturbances, namely clear-cutting and thinning, on the biogeochemical cycling of mercury (Hg) within the SEF in Huger, South Carolina. To accomplish this objective, a two-year exploratory study was proposed to conduct soil sampling and measurements of Hg and toxic methylmercury (MeHg), and soil physiochemical data within the experimental watershed (WS77) at SEF, following the clear-cutting process initiated for the preparation of the native longleaf pine restoration project by the USFS. Based on our mercury and hydrological data assessment, we concluded that the implementation of forest management practices, particularly mechanical thinning and clear-cutting, appears to enhance the potential for Hg methylation. Furthermore, these forest management practices may disrupt and alter the storage, mobility, and transformations of atmospherically deposited Hg in these lowland forests. We advocate for further research to comprehensively evaluate the impact of forest management on Hg cycling within forest ecosystems.

54 ENVIRONMENTAL SCIENCES↗

Mercury trophic transfer in Bear Creek

Mercury (especially when transformed by environmental microbes into methylmercury [MeHg]) is one of the only metals known to biomagnify in aquatic food webs, leading to elevated concentrations of this toxicant in fish. However, because Hg is predominantly accumulated in fish via dietary rather than aqueous exposure, the link between aqueous Hg concentrations and concentrations in fish is not always straightforward. This is particularly confounding for remediation efforts at contaminated sites because although reducing aqueous Hg concentrations may be achievable, concentrations in fish may not respond to these reductions in aqueous concentrations if a sufficient amount of Hg remains within the food web or if conditions favor Hg methylation in the environment.

54 ENVIRONMENTAL SCIENCES↗

Mercury Trophic Transfer in Bear Creek

Mercury (especially when transformed by environmental microbes into methylmercury [MeHg]) is one of the only metals known to biomagnify in aquatic food webs, leading to elevated concentrations of this toxicant in fish. However, because Hg is predominantly accumulated in fish via dietary rather than aqueous exposure, the link between aqueous Hg concentrations and concentrations in fish is not always straightforward. This is particularly confounding for remediation efforts at contaminated sites because although reducing aqueous Hg concentrations may be achievable, concentrations in fish may not respond to these reductions in aqueous concentrations if a sufficient amount of Hg remains within the food web or if conditions favor Hg methylation in the environment.

54 ENVIRONMENTAL SCIENCES↗

Enhancing Carbon Reactivity in Mercury Control in Lignite-Fired Systems

This project was awarded through the U.S. Department of Energy (DOE) National Energy Technology Laboratory Program Solicitation DE-PS26-03NT41718-01. The Energy & Environmental Research Center (EERC) led a consortium-based effort to resolve mercury (Hg) control issues facing the lignite industry. The EERC team-the Electric Power Research Institute (EPRI); the URS Corporation; the Babcock & Wilcox Company; ADA-ES; Apogee; Basin Electric Power Cooperative; Otter Tail Power Company; Great River Energy; Texas Utilities; Montana-Dakota Utilities Co.; Minnkota Power Cooperative, Inc.; BNI Coal Ltd.; Dakota Westmoreland Corporation; the North American Coal Corporation; SaskPower; and the North Dakota Industrial Commission-demonstrated technologies that substantially enhanced the effectiveness of carbon sorbents to remove Hg from western fuel combustion gases and achieve a high level ({ge} 55% Hg removal) of cost-effective control. The results of this effort are applicable to virtually all utilities burning lignite and subbituminous coals in the United States and Canada. The enhancement processes were previously proven in pilot-scale and limited full-scale tests. Additional optimization testing continues on these enhancements. These four units included three lignite-fired units: Leland Olds Station Unit 1 (LOS1) and Stanton Station Unit 10 (SS10) near Stanton and Antelope Valley Station Unit 1 (AVS1) near Beulah and a subbituminous Powder River Basin (PRB)-fired unit: Stanton Station Unit 1 (SS1). This project was one of three conducted by the consortium under the DOE mercury program to systematically test Hg control technologies available for utilities burning lignite. The overall objective of the three projects was to field-test and verify options that may be applied cost-effectively by the lignite industry to reduce Hg emissions. The EERC, URS, and other team members tested sorbent injection technologies for plants equipped with electrostatic precipitators (ESPs) and spray dryer absorbers combined with fabric filters (SDAs-FFs). The work focused on technology commercialization by involving industry and emphasizing the communication of results to vendors and utilities throughout the project.

01 COAL, LIGNITE, AND PEAT↗

JV Task 122 - Assessment of Mercury Control Options for the San Miguel Electric Cooperative Power Plant

In the United States, testing has been under way at electric coal-fired power plants to find viable and economical mercury control strategies to meet pending regulations. San Miguel Electric Cooperative (SMEC) engaged the Energy & Environmental Research Center (EERC) through a request for proposal (RFP) to perform research tests to evaluate sorbent-based technologies at its coal-fired San Miguel Generating Station to identify possible technology options that could be used by SMEC to meet the mercury reduction requirements of future U.S. federal standards. The goal of the testing was to target a mercury removal of {ge}90%. The EERC has successfully field-tested several sorbent-based technologies in previous projects that offer promise and potential to achieve a target removal of {ge}90%. Based on these field test results, yet recognizing that fuel type and plant operating conditions affect mercury capture significantly, the EERC proposed research tests to evaluate potential sorbent-based technologies provided by Norit Americas and the EERC that could potentially meet SMEC's mercury control objectives. Over the period of May through mid-June 2008, the EERC tested injection of both treated and nontreated activated carbon (AC) provided by Norit Americas and sorbent enhancement additives (SEAs) provided by the EERC. Tests were performed at San Miguel Unit 1 (450 MW) and included injection at the inlet of the air heater (AH) (temperature of 720 F). The test coal was a Texas lignite fuel with an average moisture content of 31.19%, an ash content of 26.6%, a heating value of 5,094 Btu/lb, a sulfur content of 2.7%, and a mercury concentration of 0.182 ppm, all reported on an as-received basis. Pilot-scale testing results identified DARCO{reg_sign} Hg-LH, SEA2 + DARCO{reg_sign} Hg, and the ChemMod sorbents as technologies with the potential to achieve the target mercury removal of {ge}90% at the full-scale test. Mercury concentrations were tracked with continuous mercury monitors (CMMs) at the electrostatic precipitator (ESP) inlet (ESP In), scrubber inlet, and scrubber outlet of San Miguel Unit 1, and a dry sorbent trap method was used to take samples periodically to measure mercury concentrations at the each of the CMM sampling locations described above. A limited number of Ontario Hydro (OH) measurements were also conducted. Removal efficiencies were calculated from mercury-in-coal values to scrubber out CMM values. Sorbent trap samples taken at the each sampling location outlet were found to be fairly consistent with CMM values. A maximum mercury removal of 78.5% was achieved with the SEA2 + DARCO Hg sorbent combination at injection rates of 50 ppm and 4 lb/Macf, respectively. An injection rate of 4 lb/Macf for DARCO Hg-LH and DARCO Hg resulted in mercury removals of 70.0% and 64.2%, respectively. These mercury reduction values were achieved at full load and at stable plant operating conditions. Scrubber reemission was observed during sorbent injection and had a significant effect on coal to scrubber out mercury removal values. When the sorbents were injected into San Miguel Unit 1 at the AH inlet, no effects on unit operations were observed. ESP performance throughout the test period was fairly steady, with only one minor breakdown. However, it should be noted that test durations were short.

01 COAL, LIGNITE, AND PEAT↗

The Mercury Resistance Operon: From an Origin in a Geothermal Environment to an Efficient Detoxification Machine

Mercuric mercury (Hg[II]) is a highly toxic and mobile element that is likely to have had a pronounced and adverse effect on biology since Earth’s oxygenation ~2.4 billion years ago due to its high affinity for protein sulfhydryl groups, which upon binding destabilize protein structure and decrease enzyme activity, resulting in a decreased organismal fitness. The central enzyme in the microbial mercury detoxification system is the mercuric reductase (MerA) protein, which catalyzes the reduction of Hg(II) to volatile Hg(0). In addition to MerA, mer operons encode for proteins involved in regulation, Hg binding, and organomercury degradation. Mer-mediated approaches have had broad applications in the bioremediation of mercury-contaminated environments and industrial waste streams. Here, we examine the composition of 272 individual mer operons and quantitatively map the distribution of mer-encoded functions on both taxonomic SSU rRNA gene and MerA phylogenies. The results indicate an origin and early evolution of MerA among thermophilic bacteria and an overall increase in the complexity of mer operons through evolutionary time, suggesting continual gene recruitment and evolution leading to an improved efficiency and functional potential of the Mer detoxification system. Consistent with a positive relationship between the evolutionary history and topology of MerA and SSU rRNA gene phylogenies (Mantel R = 0.81, p < 0.01), the distribution of the majority of mer functions, when mapped on these phylograms, indicates an overall tendency to inherit mer-encoded functions through vertical descent. However, individual mer functions display evidence of a variable degree of vertical inheritance, with several genes exhibiting strong evidence for acquisition via lateral gene transfer and/or gene loss. Collectively, these data suggest that (i) mer has evolved from a simple system in geothermal environments to a widely distributed and more complex and efficient detoxification system, and (ii) merA is a suitable biomarker for examining the functional diversity of Hg detoxification and for predicting the composition of mer operons in natural environments.

59 BASIC BIOLOGICAL SCIENCES↗

Genome-Wide Association Study Reveals Complex Genetic Architecture of Cadmium and Mercury Accumulation and Tolerance Traits in Medicago truncatula

Heavy metals are an increasing problem due to contamination from human sources that and can enter the food chain by being taken up by plants. Understanding the genetic basis of accumulation and tolerance in plants is important for reducing the uptake of toxic metals in crops and crop relatives, as well as for removing heavy metals from soils by means of phytoremediation. Following exposure of Medicago truncatula seedlings to cadmium (Cd) and mercury (Hg), we conducted a genome-wide association study using relative root growth (RRG) and leaf accumulation measurements. Cd and Hg accumulation and RRG had heritability ranging 0.44 – 0.72 indicating high genetic diversity for these traits. The Cd and Hg trait associations were broadly distributed throughout the genome, indicated the traits are polygenic and involve several quantitative loci. For all traits, candidate genes included several membrane associated ATP-binding cassette transporters, P-type ATPase transporters, oxidative stress response genes, and stress related UDP-glycosyltransferases. The P-type ATPase transporters and ATP-binding cassette protein-families have roles in vacuole transport of heavy metals, and our findings support their wide use in physiological plant responses to heavy metals and abiotic stresses. We also found associations between Cd RRG with the genes CAX3 and PDR3, two linked adjacent genes, and leaf accumulation of Hg associated with the genes NRAMP6 and CAX9. When plant genotypes with the most extreme phenotypes were compared, we found significant divergence in genomic regions using population genomics methods that contained metal transport and stress response gene ontologies. Several of these genomic regions show high linkage disequilibrium (LD) among candidate genes suggesting they have evolved together. Minor allele frequency (MAF) and effect size of the most significant SNPs was negatively correlated with large effect alleles being most rare. This is consistent with purifying selection against alleles that increase toxicity and abiotic stress. Conversely, the alleles with large affect that had higher frequencies that were associated with the exclusion of Cd and Hg. Overall, macroevolutionary conservation of heavy metal and stress response genes is important for improvement of forage crops by harnessing wild genetic variants in gene banks such as the Medicago HapMap collection.

59 BASIC BIOLOGICAL SCIENCES↗