Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HUMIDITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Vegetation Warming Experiment: Environmental conditions, Utqiagvik (Barrow), Alaska, 2021

Environmental conditions measured in five warming chambers and paired ambient control plots located on the Barrow Environmental Observatory (BEO), Utqiagvik, Alaska from 19 June - 17 September, 2021. These data were recorded in support of the Zero Power Warming (ZPW) vegetation warming experiment, a series of single season vegetation warming treatments conducted over four years from 2017-2021 (no experiment in 2020). Air temperature and humidity, infrared surface (canopy) temperature, soil temperature, soil moisture, NDVI (normalized difference vegetation index), PRI (photochemical reflectance index), solar radiation and chamber venting were recorded in each chamber at 1 minute intervals. Ambient air temperature, humidity, solar radiation and uplooking PRI and NDVI were measured at a centrally located meteorology station. Vapor pressure deficit (VPD) was calculated and included in the final processed data products. Data has undergone full QA/QC and is presented as 1 minute data, and hourly and daily aggregate data products. This data package includes unprocessed raw data (*.dat files), processed data (*.csv) and metadata including a full description of sensors, calculations and processing (*.csv, *.pdf). See related NGEE-Arctic "Vegetation Warming Experiment" data packages for leaf-level gas exchange and other leaf trait data; chamber, plot and landscape phenocamera images; thaw depth, and GPS locations of chambers and ambient plots. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

Understanding Operando Water Management in Hydroxide‐Exchange‐Membrane Fuel Cells

The water balance in hydroxide-exchange-membrane fuel cells (HEMFCs) is a key challenge for improved performance and durability, intimately linked with the various interfaces and coupled phenomena. For every 4 electrons produced, 4 water molecules are generated in the anode and 2 consumed in the cathode, while electroosmosis transports water across the HEM from the cathode to the anode. Consequently, a concentration gradient drives water back, from anode to cathode. Ineffective water management could lead to cathode dry-out, limiting reaction rate and causing ionomer degradation, or to anode flooding. To address these concerns, it is critical to measure the water transport operando . Herein, a home-built water-flux station is used to measure total water flux during cell operation with different inlet relative humidities and back pressures. Increasing the HEM thickness fourfold decreases the water flux at high current density, and utilizing microporous layers on both the anode and cathode decreases the water flux from the anode to the cathode. However, the most significant variable in changing the water flux was found by increasing the anode back pressure. Furthermore, humidity cycling significantly changed electrochemical performance without affecting the overall water fluxes. These findings can be translated to other devices utilizing an HEM.

AEMFC↗

Impact of solar geoengineering on temperatures over the Indonesian Maritime Continent

Climate change has been projected to increase the intensity and magnitude of extreme temperature in Indonesia. Solar radiation management (SRM) has been proposed as a strategy to temporarily combat global warming, buying time for negative emissions. Though the global impacts of SRM have been extensively studied in recent years, regional impacts, especially in the tropics, have received much less attention. This paper investigates the potential stratospheric sulfate aerosol geoengineering to modify mean and extreme temperature, as well as the relative humidity and wet bulb temperature (WBT) change over Indonesian Maritime Continent (IMC) based on simulations from three different earth system models. We applied statistical downscaling and corrected the bias of model output to reproduce historical temperatures and relative humidity over IMC. We compared SRM as specified by the Geoengineering Model Intercomparison Project (GeoMIP) G4 experiment – 5 Tg of SO 2 into the lower stratosphere between 2020 and 2069 – concurrent with the RCP4.5 emissions scenario. SRM is able to significantly reduce the temperature means and extremes, and although differences in magnitude of response and spatial pattern occur, there is a generally consistent response. Additionally, the spatial response of changes forced by RCP4.5 scenario and SRM impact is notably heterogeneous in the archipelago, highlighting uncertainties that would be critical in assessing socio-economic consequences of both doing, and not doing SRM. In general, SRM has bigger impacts in reducing temperatures over land than oceans, and the southern monsoon region shows more variability. SRM is also effective at reducing the likelihood of WBT > 27OC events compared to RCP4.5 after some years of SRM deployment as well as during the post-termination period of SRM. Regional downscaling may be an effective tool in obtaining policy-relevant information about local effects of different future scenarios involving SRM.

54 ENVIRONMENTAL SCIENCES↗

Prevention of nanoscale wear in atomic force microscopy through the use of monolithic ultrananocrystaline diamond probes.

Nanoscale wear is a key limitation of conventional atomic force microscopy (AFM) probes that results in decreased resolution, accuracy, and reproducibility in probe-based imaging, writing, measurement, and nanomanufacturing applications. Diamond is potentially an ideal probe material due to its unrivaled hardness and stiffness, its low friction and wear, and its chemical inertness. However, the manufacture of monolithic diamond probes with consistently shaped small-radius tips has not been previously achieved. The first wafer-level fabrication of monolithic ultrananocrystalline diamond (UNCD) probes with <5-nm grain sizes and smooth tips with radii of 30-40 nm is reported, which are obtained through a combination of microfabrication and hot-filament chemical vapor deposition. Their nanoscale wear resistance under contact-mode scanning conditions is compared with that of conventional silicon nitride (SiN{sub x}) probes of similar geometry at two different relative humidity levels ({approx}15 and {approx}70%). While SiN{sub x} probes exhibit significant wear that further increases with humidity, UNCD probes show little measurable wear. The only significant degradation of the UNCD probes observed in one case is associated with removal of the initial seed layer of the UNCD film. The results show the potential of a new material for AFM probes and demonstrate a systematic approach to studying wear at the nanoscale.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Processes of ordered structure formation in polypeptide thin film solutions.

An experimental study is presented on the hierarchical assembly of {alpha}-helical block copolymers polystyrene-poly({gamma}-benzyl-L-glutamate) into anisotropic ordered structures. We transformed thin solid films into solutions through exposure to solvent vapor and studied the nucleation and growth of ordered three-dimensional structures in such solutions, with emphasis on the dependence of these processes on supersaturation with respect to the solubility limit. Interestingly, polymer solubility could be significantly influenced via variation of humidity in the surrounding gas phase. It is concluded that the interfacial tension between the ordered structures and the solution increased with humidity. The same effect was observed for other protic non-solvents in the surrounding gas phase and is attributed to a complexation of poly({gamma}-benzyl-L-glutamate) by protic non-solvent molecules (via hydrogen-bonding interactions). This change of polymer solubility was demonstrated to be reversible by addition or removal of small amounts of protic non-solvent in the surrounding gas phase. At a constant polymer concentration, ordered ellipsoidal structures could be dissolved by removing water or methanol present in the solution. Such structures formed once again when water or methanol was reintroduced via the vapor phase.

08 HYDROGEN↗

Sub-cloud moist entropy curvature as a predictor for changes in the seasonal cycle of tropical precipitation

Convective Quasi-Equilibrium (CQE) may be a useful framework for understanding the precipitation minus evaporation (P-E) response to CO2-induced warming. To explore this proposition, a suite of aquaplanet simulations with a slab ocean from TRACMIP (the Tropical Rain belts with an Annual cycle and a Continent Model Intercomparison Project) is analyzed. A linear relationship between P-E and the curvature of sub-cloud moist entropy, a marker for the spatial distribution of sub-cloud moist energy and onset of a tropical direct overturning circulation under CQE conditions, is shown to exist across many of the TRACMIP simulations. Furthermore, this linear relationship is a skillful predictor of changes in P-E in response to CO2-induced warming. The curvature metric also shows improvement in predicting P-E changes compared to the simpler method of relating P-E directly to the sub-cloud moist entropy field or a simple ‘wet-get-wetter’ type null hypothesis, especially on seasonal and shorter timescales. Using fixed relative humidity in the curvature metric and sub-cloud moist entropy degrades their ability to predict P-E changes, implying that both temperature and relative humidity changes in the boundary layer are important for characterizing future precipitation changes. To understand why the curvature metric is a skillful predictor of hydrological changes, a moist static energy (MSE) budget analysis is performed, which shows that MSE divergence on sub-daily timescales is well parameterized as a downgradient diffusive process. Additionally, this transient MSE divergence has a similar structure to the curvature term. Assuming that the transient MSE divergence is related to convective activity, these findings suggest that the theoretical underpinning of the linear relationship between the curvature term and P-E resides in cloud processes that both remove spatial gradients of sub-cloud moist entropy and generate precipitation at sub-seasonal and shorter timescales.

aquaplanet simulations↗

Isotopic evolution of saline lakes in the low-latitude and polar regions

Isotopic fractionations associated with two primary processes (evaporation and freezing of water) are discussed, which are responsible for the formation and evolution of saline lakes in deserts from both low-latitude and the Polar regions. In an evaporative system, atmospheric parameters (humidity and isotopic composition of water vapor) have strong influence on the isotopic behavior of saline lakes, and in a freezing system, salinity build-up largely controls the extent of freezing and associated isotope fractionation. In both systems, salinity has a direct impact on the isotopic evolution of saline lakes. It is proposed that a steady-state terminal lake model with short-term hydrologic and environmental perturbations can serve as a useful framework for investigating both evaporative and freezing processes of perennial saline lakes. Through re-assessment of own work and literature data for saline lakes, it was demonstrated that effective uses of the isotope activity compositions of brines and salinity-chemistry data could reveal dynamic changes and evolution in the isotopic compositions of saline lakes in response to hydrologic and environmental changes. The residence time of isotopic water molecules in lakes determines the nature of responses in the isotopic compositions following perturbations in the water and isotope balances (e.g., dilution by inflow, water deficit by increased evaporation, and/ or reduction in inflow). The isotopic profiles of some saline lakes from the Polar regions show that they switched the two contrasting modes of operation between evaporative and freezing systems, in response to climate and hydrological changes in the past.

Horita, Juske↗

Effect of Natural and Accelerated Aging on the Mechanical Performance of a Composite Based on Recycled Multilayer Carton

A composite elaborated from waste material was studied for its proposed use as a wood plastic composite. Multilayer food cartons and recycled high density polyethylene were used for the elaboration of laminates, in a proportion of 55% and 45% volume fraction, respectively. The samples were subjected to an aging in an accelerated weathering (AW) chamber for 0, 500, 1000 and 2000 h with UVB radiation, temperature and humidity cycles. Samples exposed to natural weathering (NW) for 0, 1300, 2600 and 5200 h, in a warm sub-humid environment were also studied, the aim being to elucidate a correlation of the useful lifespan of the material. In both cases, after the exposure, three-point bend tests were performed to evaluate the effect on the mechanical properties. The analysis of the degradation process was carried out by infrared spectroscopy, indicating that the AW and NW samples showed deterioration of the material in different proportions. By mean of thermal analysis, it was possible to associate the degradation with the appearance and/or growth of the endothermic peaks, showing a variation in the melting temperature as the time of exposure to AW and NW increased, resulting in a change in the crystallinity percentage. The modulus of rupture (MOR) and the flexural modulus of elasticity decreased by 20% in samples subjected to AW for 2000 h; while in the samples exposed to NW, required of 5200 h to obtain a reduction of 16% in the MOR.

36 MATERIALS SCIENCE↗

Multi-region Modeling of Daily Global Solar Radiation with Artificial Intelligence Ensemble

Solar radiation data are crucial for the design and evaluation of solar energy systems, climatic studies, water resources management, estimating crop productivity, etc. As so, for locations where direct measurements are not available, reliable models may be developed to estimate solar radiation from more readily available data. In this study, two artificial intelligence (AI)-based models including artificial neural network and adaptive neuro-fuzzy inference systems, three temperature-based empirical models including Meza–Varas, Hargreaves–Samani, and Chen, and a conventional multi-linear regression (MLR) model were employed for multi-region daily global solar radiation estimation for Iraq. To ensure appropriate selection of input variables, sensitivity analysis was conducted to determine the dominant parameters. Finally, two ensemble approaches, neural average ensemble and simple average ensemble, were applied to improve the performance of the single models. For this purpose, daily meteorological data of maximum temperature (T{sub max}), minimum temperature (T{sub min}), mean temperature (T{sub mean}), relative humidity (R{sub H}), and wind speed (U{sub 2}) were obtained from January 2006 to December 2016 from four major cities in Iraq representing, north, west, south, and east regions. The results revealed that temperatures (T{sub max}, T{sub mean}, T{sub min}) and relative humidity are the dominant parameters. While temperature-based empirical models and MLR model could be employed to achieve reliable results, AI-based models are superior in performance to other models. Also promising improvement in daily global solar radiation modeling could be achieved by model ensemble. The results of this study affirmed that the provided ensemble approaches can increase the performance of single models up to 19.19%, 7.59%, and 16.81% in training, validation, and testing steps, respectively.

58 GEOSCIENCES↗

Comparative Atmospheric Corrosion Behavior of a Mild Steel and an Interstitial Free Steel

The present work discusses the effect of structure and morphology of rust on the corrosion behavior of a mild steel and an interstitial free steel exposed to open atmosphere for 2 years involving extreme weather conditions, where temperature varies from 2-3 to 45 °C, rainfall varies from 10 to 320 mm and humidity varies from ~ 20 to 75%. Effect of duration of atmospheric exposure, change in morphological characteristics of rust, and atmospheric parameters, such as temperature, humidity, rain and SO{sub 2} content on the corrosion behavior of both the steels was analyzed. Corrosion resistance of the interstitial free steel was better than the mild steel due to lower carbon content and better compactness of the rusts formed on the interstitial free steel.

36 MATERIALS SCIENCE↗

Research needs targeting direct air capture of carbon dioxide: Material & process performance characteristics under realistic environmental conditions

The extraction of CO 2 from ambient air, or direct air capture (DAC), is a crucial negative CO 2 emissions technology with great potential for contributing to the mitigation of global warming and climate change. Furthermore, nearly all published research on DAC has been conducted under indoor temperature conditions, i.e. 20 to 30 °C. In contrast, the future global implementation of DAC requires it to be operational across a wide expanse of geographical areas, of which the local temperatures can vary between -30 to 50 °C. Similarly, the absolute humidity can vary from ~0 to 84 g/m 3 in various locations. Due to the massive amount of air that would be processed, it may be impractical to preheat or dehumidify the air before the CO 2 separation. Therefore, it is important to develop DAC materials with good performance at realistic outdoor conditions, especially at sub-ambient conditions, i.e. -30 to 20 °C. In addition to material development, system-level studies at sub-ambient conditions are also needed for the DAC processes to reach optimal designs, which may be very different from those at ambient conditions. In this perspective article, we first assess the literature to identify the technical gaps that need to be filled for DAC to be applicable at realistic outdoor conditions. We then suggest additional research directions needed for DAC to be viable under varied conditions from the perspectives of materials and system designs. For materials, we discuss the expected physical and chemical property changes for the sorbents when the temperature or humidity reaches extremes within their range, and how that will impact performance. Similarly, for system design, we indicate how varied conditions will impact performance and how these changes will impact process optimization.

20 FOSSIL-FUELED POWER PLANTS↗

Mechanistic modeling of copper corrosions in data center environments

Air-side economizers are increasingly used to take advantage of “free-cooling” in data centers with the intent of reducing the carbon footprint of buildings. However, they can introduce outdoor pollutants to indoor environment of data centers and cause corrosion damage to the information technology equipment. Here, to evaluate the reliability of information technology equipment under various thermal and air-pollution conditions, a mechanistic model based on multi-ion transport and chemical reactions was developed. The model was used to predict Cu corrosion caused by Cl2-containing pollutant mixtures. It also accounted for the effects of temperature (25 °C and 28 °C), relative humidity (50%, 75%, and 95%), and synergism. It also identified higher air temperature as a corrosion barrier and higher relative humidity as a corrosion accelerator, which agreed well with the experimental results. The average root mean square error of the prediction was 13.7 Å. The model can be used to evaluate the thermal guideline for data centers design and operation when Cl2 is present based on pre-established acceptable risk of corrosion in data centers’ environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A comparative structural study of wet and dried ettringite

Two different techniques were used to compare structural characteristics of 'wet' ettringite (stored in the synthesis mother liquid) and 'dried' ettringite (dried to 35% relative humidity over saturated CaCl{sub 2} solution). Lattice parameters and the water content in the channel region of the structure (site occupancy factor of the water molecule not bonded to cations) as well as microstructure parameters (size and strain) were determined from a Rietveld refinement on synchrotron powder diffraction data. Local environment of sulphate anions and of the hydrogen bonding network was characterized by Raman spectroscopy. Both techniques led to the same conclusion: the 'wet' ettringite sample immersed in the mother solution from the synthesis presents similar structural features as ettringite dried to 35% relative humidity. An increase of the a lattice parameter combined with a decrease of the c lattice parameter occurs on drying. The amount of structural water, the point symmetry of sulphate and the hydrogen bond network are unchanged when passing from the wet to the dried ettringite powder. Ettringite does not form a high-hydrate polymorph in equilibrium with alkaline solution, in contrast to the AFm phases that lose water molecules on drying. According to these results we conclude that ettringite precipitated in aqueous solution at the early hydration stages is of the same chemical composition as ettringite present in the hardening concrete.

36 MATERIALS SCIENCE↗

Microstructural effects in the simulation of creep of concrete

The influence of the microstructure on the visco-elastic properties of concrete is investigated using finite element simulations at the meso-scale. We first derive a constitutive law for the creep of the cement paste which accounts for both recoverable and permanent deformations, as well as the influence of temperature and internal relative humidity. The model is calibrated on a set of experiments at the cement paste scale, and then validated after upscaling to the concrete scale. The model is then applied to study the influence of the microstructure on the macroscopic creep of concrete. We show that materials with finer particles exhibit less creep, and that the anisotropy of creep can be explained with the shape and orientation of the aggregates. Furthermore, the acceleration of the stress relaxation in the presence of damage is explained by the micro-mechanical interaction between the aggregates, the cement paste, and the micro-cracks.

36 MATERIALS SCIENCE↗

Moisture transport and sorption in cement based materials containing slag or silica fume

This paper presents the moisture dependency of moisture transport and moisture fixation in mortars with OPC, slag and silica fume. Water vapor desorption isotherms were measured with gravimetric methods and the moisture dependency of moisture transport was investigated with cup-tests. The results show an ongoing evolution of water vapor desorption isotherms from eight months to four years. The evolution is more pronounced for mortars containing slag. The results also show that there is a significant difference in moisture dependency of the moisture transport properties above 70% relative humidity; some mortars exhibit a clear moisture dependency in moisture transport whereas others do not. At a relative humidity below 70%, the water to binder ratio is more decisive for moisture transport than the type of binder. These results are of value for service-life models, where they represent important input data, and for understanding the evolution of the microstructure at later ages.

36 MATERIALS SCIENCE↗

Drying model of a high salt content cementitious waste form: Effect of capillary forces and salt solution

Highlights: • Drying model for a high salt content cementitious waste form is developed. • Water vapor diffusion and capillary liquid flow are distinguished. • Capillary and salt solution effects are considered in vapor-liquid equilibrium. A water transport model coupling capillary liquid flow with vapor diffusion is developed to describe the drying process for a cementitious waste form with high salinity porewater. Vapor-liquid equilibrium is formulated as the driving force for vapor diffusion and the model accounts for pore capillary and high salinity effects on water thermodynamic activity. Pore filling and porewater surface tension as a function of pore size distribution and water saturation have been quantified for the material. Geochemical speciation modeling is used to simulate porewater activity as a function of composition over the range of saturation. The theoretical relationship between relative humidity and water saturation generally agrees with experimental measurement, and the developed model is capable of predicting drying rates under various external relative humidity conditions. The model was developed to be incorporated into reactive transport models considering the effects of drying such as salt redistribution and efflorescence.

36 MATERIALS SCIENCE↗

A simple method to measure the isosteric energy of adsorption

The effect of temperature on water vapour desorption isotherms can be described simply using the Clausius-Clapeyron equation and the isosteric energy of adsorption, the latter conventionally estimated using two (or more) isotherms obtained at different temperatures. This approach has some disadvantages, however, and this article puts forward a simple alternative methodology for characterising this isosteric energy experimentally. Our method is based on monitoring the relative humidity of a cementitious material heated under sealed conditions. The evolution of the relative humidity as a function of temperature makes it possible to directly evaluate the isosteric energy. In practice, the tests are performed using a cell of the type that is used for self-desiccation studies.

36 MATERIALS SCIENCE↗

Estimating viscoelastic compliance of desiccating cementitious materials using drying prism tests

Highlights: • Determining relative humidity and degree of reaction of desiccating cementitious materials via an integrated method • Extracting moisture diffusion coefficient of cement mortar using the mass loss data of the prism specimens • Estimating uniaxial viscoelastic compliance of cement mortar using the shrinkage strain data of the prism specimens An integrated modeling approach to determining internal relative humidity and degree of reaction of desiccating cementitious materials has been developed. By simultaneously accounting for both self-desiccation and external drying, the model is capable of predicting the evolution of material properties of desiccating cementitious materials. Using the mass loss data of the prism specimens, the moisture diffusion coefficient of a nonlinear model for cement mortar was determined. Additionally, a previous poroviscoelastic shrinkage model was modified and extended. Through comparison of predicted and measured axial strain of the prism specimens, the viscoelastic compliance of cement mortar was extracted. The present work revealed that it is possible to use a simple drying prism test to fit the moisture diffusion coefficient and creep compliance of cementitious materials, though the comparison of the extracted viscoelastic compliance with measured compliance was only reasonable if the outer layer of the drying mortar was presumed to have microcracking.

36 MATERIALS SCIENCE↗