Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GROUND LEVEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Faddeev random-phase approximation for molecules

The Faddeev random-phase approximation is a Green's function technique that makes use of Faddeev equations to couple the motion of a single electron to the two-particle-one-hole and two-hole-one-particle excitations. This method goes beyond the frequently used third-order algebraic diagrammatic construction method: all diagrams involving the exchange of phonons in the particle-hole and particle-particle channel are retained, but the phonons are now described at the level of the random-phase approximation, which includes ground-state correlations, rather than at the Tamm-Dancoff approximation level, where ground-state correlations are excluded. Previously applied to atoms, this paper presents results for small molecules at equilibrium geometry.

74 ATOMIC AND MOLECULAR PHYSICS↗

Infrared spectroscopy and tunneling dynamics of the vinyl radical in 4 He nanodroplets

Here, the vinyl radical has been trapped in 4 He nanodroplets and probed with infrared laser spectroscopy in the CH stretch region between 2850 and 3200 cm -1 . The assigned band origins for the CH 2 symmetric (ν 3 ), CH 2 antisymmetric (ν 2 ), and lone α-CH stretch (ν 1 ) vibrations are in good agreement with previously reported full-dimensional vibrational configuration interaction computations. For all three bands, a-type and b-type transitions are observed from the lowest symmetry allowed roconvibrational state of each nuclear spin isomer, which allows for a determination of the tunneling splittings in both the ground and excited vibrational levels. Comparisons to gas phase millimeter-wave rotation-tunneling and high-resolution jet-cooled infrared spectra reveal that the He solvent effect is to reduce the ground and ν 3 excited state tunneling splittings by ≈20%. This solvent-induced modification of the tunneling dynamics can be reasonably accounted for by assuming either a ≈2.5% increase in the effective barrier height along the tunneling coordinate or a ≈5% increase in the effective reduced mass of the tunneling particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Proton tunneling in low dimensional cesium silicate LDS-1

In low dimensional cesium silicate LDS-1 (monoclinic phase of CsHSi{sub 2}O{sub 5}), anomalous infrared absorption bands observed at 93, 155, 1210, and 1220 cm{sup −1} are assigned to the vibrational mode of protons, which contribute to the strong hydrogen bonding between terminal oxygen atoms of silicate chain (O–O distance = 2.45 Å). The integrated absorbance (oscillator strength) for those modes is drastically enhanced at low temperatures. The analysis of integrated absorbance employing two different anharmonic double-minimum potentials makes clear that proton tunneling through the potential barrier yields an energy splitting of the ground state. The absorption bands at 93 and 155 cm{sup −1}, which correspond to the different vibrational modes of protons, are attributed to the optical transition between the splitting levels (excitation from the ground state (n = 0) to the first excited state (n = 1)). Moreover, the absorption bands at 1210 and 1220 cm{sup −1} are identified as the optical transition from the ground state (n = 0) to the third excited state (n = 3). Weak Coulomb interactions in between the adjacent protons generate two types of vibrational modes: symmetric mode (93 and 1210 cm{sup −1}) and asymmetric mode (155 and 1220 cm{sup −1}). The broad absorption at 100–600 cm{sup −1} reveals an emergence of collective mode due to the vibration of silicate chain coupled not only with the local oscillation of Cs{sup +} but also with the proton oscillation relevant to the second excited state (n = 2)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nuclear Thermal Propulsion (NTP): A Proven Growth Technology for Human NEO/Mars Exploration Missions

The nuclear thermal rocket (NTR) represents the next "evolutionary step" in high performance rocket propulsion. Unlike conventional chemical rockets that produce their energy through combustion, the NTR derives its energy from fission of Uranium-235 atoms contained within fuel elements that comprise the engine s reactor core. Using an "expander" cycle for turbopump drive power, hydrogen propellant is raised to a high pressure and pumped through coolant channels in the fuel elements where it is superheated then expanded out a supersonic nozzle to generate high thrust. By using hydrogen for both the reactor coolant and propellant, the NTR can achieve specific impulse (Isp) values of ~900 seconds (s) or more - twice that of today s best chemical rockets. From 1955 - 1972, twenty rocket reactors were designed, built and ground tested in the Rover and NERVA (Nuclear Engine for Rocket Vehicle Applications) programs. These programs demonstrated: (1) high temperature carbide-based nuclear fuels; (2) a wide range of thrust levels; (3) sustained engine operation; (4) accumulated lifetime at full power; and (5) restart capability - all the requirements needed for a human Mars mission. Ceramic metal "cermet" fuel was pursued as well, as a backup option. The NTR also has significant "evolution and growth" capability. Configured as a "bimodal" system, it can generate its own electrical power to support spacecraft operational needs. Adding an oxygen "afterburner" nozzle introduces a variable thrust and Isp capability and allows bipropellant operation. In NASA s recent Mars Design Reference Architecture (DRA) 5.0 study, the NTR was selected as the preferred propulsion option because of its proven technology, higher performance, lower launch mass, versatile vehicle design, simple assembly, and growth potential. In contrast to other advanced propulsion options, no large technology scale-ups are required for NTP either. In fact, the smallest engine tested during the Rover program - the 25,000 lbf (25 klbf) "Pewee" engine is sufficient when used in a clustered engine arrangement. The "Copernicus" crewed spacecraft design developed in DRA 5.0 has significant capability and a human exploration strategy is outlined here that uses Copernicus and its key components for precursor near Earth object (NEO) and Mars orbital missions prior to a Mars landing mission. The paper also discusses NASA s current activities and future plans for NTP development that include system-level Technology Demonstrations - specifically ground testing a small, scalable NTR by 2020, with a flight test shortly thereafter.

Borowski, Stanley K.↗

EFFECT OF ENDOSPERM HARDNESS ON AN ETHANOL PROCESS USING A GRANULAR STARCH HYDROLYZING ENZYME

Granular starch hydrolyzing enzymes (GSHE) can hydrolyze starch at low temperature (32°C). The dry grind process using GSHE (GSH process) has fewer unit operations and no changes in process conditions (pH 4.0 and 32°C) compared to the conventional process because it dispenses with the cooking and liquefaction step. In this study, the effects of endosperm hardness, protease, urea, and GSHE levels on GSH process were evaluated. Ground corn, soft endosperm, and hard endosperm were processed using two GSHE levels (0.1 and 0.4 mL per 100 g ground material) and four treatments of protease and urea addition. Soft and hard endosperm materials were obtained by grinding and sifting flaking grits from a dry milling pilot plant; classifications were confirmed using scanning electron microscopy. During 72 h of simultaneous granular starch hydrolysis and fermentation (GSHF), ethanol and glucose profiles were determined using HPLC. Soft endosperm resulted in higher final ethanol concentrations compared to ground corn or hard endosperm. Addition of urea increased final ethanol concentrations for soft and hard endosperm. Protease addition increased ethanol concentrations and fermentation rates for soft endosperm, hard endosperm, and ground corn. The effect of protease addition on ethanol concentrations and fermentation rates was most predominant for soft endosperm, less for hard endosperm, and least for ground corn. Samples (soft endosperm, hard endosperm, or corn) with protease resulted in higher (1.0% to 10.5% v/v) ethanol concentration compared to samples with urea. The GSH process with protease requires little or no urea addition. For fermentation of soft endosperm, GSHE dose can be reduced. Due to nutrients (lipids, minerals, and soluble proteins) present in corn that enhance yeast growth, ground corn fermented faster at the beginning than hard and soft endosperm.

09 BIOMASS FUELS↗

Aerogeophysical evidence for active volcanism beneath the West Antarctic Ice Sheet

Although it is widely understood that the collapse of the West Antarctic Ice Sheet (WAIS) would cause a global sea-level rise of 6 m, there continues to be considerable debate about the response of this ice sheet to climate change. The stability of the WAIS, which is characterized by a bed grounded well below sea level, may depend on geologically controlled conditions at the base, which are independent of climate. Ice streams moving up to 750 m/yr disperse material from the interior through to the oceans. As these ice streams tend to buffer the reservoir of slow-moving inland ice from exposure to oceanic degradation, understanding the ice-streaming process is important for evaluating WAIS stability. There is strong evidence that ice streams slide on a lubricating layer of water-saturated till. Development of this basal layer requires both water and easily eroded sediments. Active lithospheric extension may elevate regional heat flux, increase basal melting, and trigger ice streaming. If a geologically defined boundary with a sharp contrast in geothermal flux exists beneath the WAIS, ice streams may only be capable of operating as a buffer over a restricted region. Should ocean waters penetrate beyond this boundary, the ice-stream buffer would disappear, possibly triggering a collapse of the inland ice reservoir. Aerogeophysical evidence for active volcanism and elevated heat flux beneath the WAIS near the critical region where ice streaming begins is presented.

Blankenship, Donald D.↗

SCIX IMPACT ON DWPF CPC

A program was conducted to systematically evaluate potential impacts of the proposed Small Column Ion Exchange (SCIX) process on the Defense Waste Processing Facility (DWPF) Chemical Processing Cell (CPC). The program involved a series of interrelated tasks. Past studies of the impact of crystalline silicotitanate (CST) and monosodium titanate (MST) on DWPF were reviewed. Paper studies and material balance calculations were used to establish reasonable bounding levels of CST and MST in sludge. Following the paper studies, Sludge Batch 10 (SB10) simulant was modified to have both bounding and intermediate levels of MST and ground CST. The SCIX flow sheet includes grinding of the CST which is larger than DWPF frit when not ground. Nominal ground CST was not yet available, therefore a similar CST ground previously in Savannah River National Laboratory (SRNL) was used. It was believed that this CST was over ground and that it would bound the impact of nominal CST on sludge slurry properties. Lab-scale simulations of the DWPF CPC were conducted using SB10 simulants with no, intermediate, and bounding levels of CST and MST. Tests included both the Sludge Receipt and Adjustment Tank (SRAT) and Slurry Mix Evaporator (SME) cycles. Simulations were performed at high and low acid stoichiometry. A demonstration of the extended CPC flowsheet was made that included streams from the site interim salt processing operations. A simulation using irradiated CST and MST was also completed. An extensive set of rheological measurements was made to search for potential adverse consequences of CST and MST and slurry rheology in the CPC. The SCIX CPC impact program was conducted in parallel with a program to evaluate the impact of SCIX on the final DWPF glass waste form and on the DWPF melter throughput. The studies must be considered together when evaluating the full impact of SCIX on DWPF. Due to the fact that the alternant flowsheet for DWPF has not been selected, this study did not consider the impact of proposed future alternative DWPF CPC flowsheets. The impact of the SCIX streams on DWPF processing using the selected flowsheet need to be considered as part of the technical baseline studies for coupled processing with the selected flowsheet. In addition, the downstream impact of aluminum dissolution on waste containing CST and MST has not yet been evaluated. The current baseline would not subject CST to the aluminum dissolution process and technical concerns with performing the dissolution with CST have been expressed. Should this option become feasible, the downstream impact should be considered. The main area of concern for DWPF from aluminum dissolution is an impact on rheology. The SCIX project is planning for SRNL to complete MST, CST, and sludge rheology testing to evaluate any expected changes. The impact of ground CST transport and flush water on the DWPF CPC feed tank (and potential need for decanting) has not been defined or studied.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

On the spectrum of the hydrogen atom in an ultrastrong magnetic field

Various approaches to computing the energies of the ground state and excited levels of the hydrogen atom in an ultrastrong magnetic field B that considerably exceeds the field B{sub a} = m{sub e}{sup 2}e{sup 3}c/h{sup 3} {approx} 10{sup 9} G are considered. The effects of polarization of vacuum and anomalous magnetic moment of the electron on the position of the atomic levels are discussed. The vacuum polarization effects are negligibly weak for B < 10{sup 15} G but become significant in fields B Much-Greater-Than 10{sup 16} G, in which these effects qualitatively modify the atomic spectrum in this range. The difference in the behaviors of the even and odd energy levels for B Much-Greater-Than B{sub a} is analyzed and the formulas for the energies of odd levels as a function of field B are refined.

74 ATOMIC AND MOLECULAR PHYSICS↗

Estimating noise levels of remotely sensed measurements from satellites using spatial structure analysis

A technique is presented whereby the noise level of satellite measurements of the atmosphere and earth can be estimated. The technique analyzes a spatial array of data measured by a satellite instrument. A minimum of about 200 satellite measurements is required, preferably in a regular pattern. Statistical structure analysis is used to describe a combination of the mean gradient and noise in the data. The noise level is then estimated by separating out the gradient information and leaving only the noise. Results are presented for four satellite sounding instruments, and effective blackbody or brightness temperature noise levels were compared to prelaunch specifications or inflight calibrations for each instrument. Comparisons showed that in the absence of cloud-contaminated measurements (in the case of infrared data) and away from the highly variable ground surface, the noise level of various satellite instruments can be obtained without the need for calibration data. The noise levels imply how much spatial averaging is possible, without smearing the detected geophysical gradient, and how much is necessary, to meet the absolute signal accuracy requirements for the intended use of the satellite measurements.

Hillger, Donald W.↗

Sound-Level Measurements of a Light Airplane Modified to Reduce Noise Reaching the Ground

An Army liaison-type airplane, representative of personal airplanes in the 150 to 200 horsepower class, has been modified to reduce propeller and engine noise according to known principles of airplane-noise reduction. Noise-level measurements demonstrate that, with reference to an observer on the ground, a noisy airplane of this class can be made quiet -- perhaps more quiet than necessary. In order to avoid extreme and unnecessary modifications, acceptable noise levels must be determined.

Vogeley, A W↗

Density Functional Study of Perovskite Superconductor MgCNi{sub 3}

We here report the first principle density functional study of MgCNi{sub 3} which crystallize in cubic perovskite structure having critical transition temperature of 8 K. The interesting aspect of this compound is that in normal state it is non magnetic in nature despite conduction electrons in it are derived from partially filled Ni d states, which typically lead to ferromagnetism in metallic Ni and many Ni-based binary alloys. To investigate the detailed microscopic origin of the non magnetic nature we have done density functional based calculations on this compound. The lattice constant is calculated using minimum energy criteria from total energy versus lattice constant plot. By taking the calculated values of lattice constant we have done the precise calculations on the compound using Full Potential Linear Augmented Plane Wave (FP-LAPW) method implemented in ELK code. The electronic density of states is found spin degenerate that corresponds to a non-magnetic ground state. The density of states (DOS) at Fermi level, N(E{sub F}) is dominated by Ni-d states. The sharp peak observed just below Fermi level corresponds to van Hove singularity (vHs). The projected density of states (PDOS) suggests a strong hybridization of Ni-3d and C-2p states which is responsible for the observed non magnetic nature of MgCNi{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

At which magnetic field, exactly, does the Kondo resonance begin to split? A Fermi liquid description of the low-energy properties of the Anderson model

This paper is a corrected version of Phys. Rev. B 95, 165404 (2017), which we have retracted because it contained a trivial but fatal sign error that lead to incorrect conclusions. In this study, we extend a recently developed Fermi liquid (FL) theory for the asymmetric single-impurity Anderson model [C. Mora et al., Phys. Rev. B 92, 075120 (2015)] to the case of an arbitrary local magnetic field. To describe the system's low-lying quasiparticle excitations for arbitrary values of the bare Hamiltonian's model parameters, we construct an effective low-energy FL Hamiltonian whose FL parameters are expressed in terms of the local level's spin-dependent ground-state occupations and their derivatives with respect to level energy and local magnetic field. These quantities are calculable with excellent accuracy from the Bethe ansatz solution of the Anderson model. Applying this effective model to a quantum dot in a nonequilibrium setting, we obtain exact results for the curvature of the spectral function, c A , describing its leading ~ε 2 term, and the transport coefficients c V and c T , describing the leading ~V 2 and ~T 2 terms in the nonlinear differential conductance. A sign change in c A or c V is indicative of a change from a local maximum to a local minimum in the spectral function or nonlinear conductance, respectively, as is expected to occur when an increasing magnetic field causes the Kondo resonance to split into two subpeaks. In conclusion, we find that the fields B A , B T , and B V at which c A , c T , and c V change sign, respectively, are all of order T K , as expected, with B A = B T = B V = 0.75073T K in the Kondo limit.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mission Operations with an Autonomous Agent

The Remote Agent (RA) is an Artificial Intelligence (AI) system which automates some of the tasks normally reserved for human mission operators and performs these tasks autonomously on-board the spacecraft. These tasks include activity generation, sequencing, spacecraft analysis, and failure recovery. The RA will be demonstrated as a flight experiment on Deep Space One (DSI), the first deep space mission of the NASA's New Millennium Program (NMP). As we moved from prototyping into actual flight code development and teamed with ground operators, we made several major extensions to the RA architecture to address the broader operational context in which PA would be used. These extensions support ground operators and the RA sharing a long-range mission profile with facilities for asynchronous ground updates; support ground operators monitoring and commanding the spacecraft at multiple levels of detail simultaneously; and enable ground operators to provide additional knowledge to the RA, such as parameter updates, model updates, and diagnostic information, without interfering with the activities of the RA or leaving the system in an inconsistent state. The resulting architecture supports incremental autonomy, in which a basic agent can be delivered early and then used in an increasingly autonomous manner over the lifetime of the mission. It also supports variable autonomy, as it enables ground operators to benefit from autonomy when L'@ey want it, but does not inhibit them from obtaining a detailed understanding and exercising tighter control when necessary. These issues are critical to the successful development and operation of autonomous spacecraft.

Pell, Barney↗

Addressing EO-1 Spacecraft Pulsed Plasma Thruster EMI Concerns

The Pulsed Plasma Thruster (PPT) Experiment on the Earth Observing One (EO-1) spacecraft has been designed to demonstrate the capability of a new generation PPT to perform spacecraft attitude control. Results from PPT unit level radiated electromagnetic interference (EMI) tests led to concerns about potential interference problems with other spacecraft subsystems. Initial plans to address these concerns included firing the PPT at the spacecraft level both in atmosphere, with special ground support equipment. and in vacuum. During the spacecraft level tests, additional concerns where raised about potential harm to the Advanced Land Imager (ALI). The inadequacy of standard radiated emission test protocol to address pulsed electromagnetic discharges and the lack of resources required to perform compatibility tests between the PPT and an ALI test unit led to changes in the spacecraft level validation plan. An EMI shield box for the PPT was constructed and validated for spacecraft level ambient testing. Spacecraft level vacuum tests of the PPT were deleted. Implementation of the shield box allowed for successful spacecraft level testing of the PPT while eliminating any risk to the ALI. The ALI demonstration will precede the PPT demonstration to eliminate any possible risk of damage of ALI from PPT operation.

Zakrzwski, C. M.↗

Investigation of Flow Instabilities in the Inlet Ducts of DP-1C VTOL Aircraft

An investigation of flow instabilities in the inlet ducts of a two-engine vertical takeoff and landing aircraft DP-1C is described in this report. Recent tests revealed that the engines stall during run ups while the aircraft is operating on the ground. These pop stalls occurred at relatively low power levels, sometimes as low as 60 percent of the engine full speed. Inability to run the engines up to the full speed level is attributed to in-ground effects associated with hot gas ingestion. Such pop stalls were never experienced when the aircraft was tested on a elevated grid platform, which ensured that the aircraft was operating in out-of-the-ground-effect conditions. Based on available information on problems experienced with other vertical takeoff and landing aircraft designs, it was assumed that the engine stalls were caused by partial ingestion of hot gases streaming forward from the main exit nozzle under the aircraft inlets, which are very close to the ground. It was also suggested that the nose wheel undercarriage, located between the inlets, may generate vortices or an unstable wake causing intense mixing of hot exit gases with incoming inlet flow, which would enhance the hot gas ingestion. After running a short three-day series of tests with fully instrumented engine inlets, it is now believed the most probable reason for engine pop stalls are random ingestions of a vortex generated between the two streams moving in opposite directions: outbound hot gas stream from the main nozzle close to the ground and inbound inlet flow above. Originally, the vortex is in a horizontal plane. However, at a certain velocity ratio of these two streams, the vortex attaches either to the ground or the aircraft surface at one end and the other end is swallowed by one of the aircraft inlets. Once the vortex enters the inlet duct, a puff of hot air can be sucked through the vortex core into the engine, which causes a serious inlet flow field distortion followed by an engine stall. Once the engine stalls, the outflow from the inlet pushes the vortex away and the engine resumes normal operation. This hypothesis needs to be verified experimentally; e.g., by extensive smoke flow visualization ahead of the aircraft inlets.

Lepicovsky, Jan↗

Emergence of pygmy dipole resonances: Magic numbers and neutron skins

The pygmy dipole resonances (PDR) for even-even nuclei in 8{<=}Z{<=}40 are studied performing a systematic calculation of the random-phase approximation with the Skyrme functional of SkM*. The calculation is fully self-consistent and does not assume any symmetry in the nuclear shape of the ground state. In every isotopic chain, the PDR emerges by showing a peak of the E1 strength at energies less than 10 MeV. The E1 strength of the PDR strongly depends on the position of the Fermi level and shows a clear correlation with the occupation of the orbits with the orbital angular momenta less than 3({h_bar}/2{pi}) (l{<=}2). We also found a strong correlation between the isotopic dependence of the neutron skin thickness and the pygmy dipole strength. The fraction of the energy-weighted strength exhausted by the PDR and the neutron skin thickness show a linear correlation with the universal rate of about 0.2 fm{sup -1}.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

d{sup 0} Half-Metallic Ferromagnetism in CaN and CaAs Pnictides: an Ab Initio Study

Conventional magnetism occurs in systems which contain transition metals or rare earth ions with partially filled d or f shells. It is theoretically predicted that compounds of groups IA and IIA with IV and V, in some structural phases, are ferromagnetic half-metals which made them new candidates for spintronics applications. Employing density functional theory (DFT), we investigate magnetism in binary compounds CaN and CaAs. Regarding the structure of analogous magnetic materials and experimental results of CaAs synthesis, we have considered two cubic structures: rocksalt (RS) and zincblende (ZB), and four hexagonal structures: NiAs, wurtzite (WZ), anti-NiAs, and NaO. The calculated results show that CaN in cubic, NiAs, and wurtzite structures, and CaAs only in zincblende phase have ferromagnetic ground states with a magnetic moment of 1 μ{sub B}. Electronic structure analysis of these materials indicates that magnetism originates from anion p states. Existence of flat p bands and consequently high density of states at the Fermi level of magnetic structures gives rise to Stoner spin splitting and spontaneous ferromagnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modelling Neutron-induced Reactions on 232–237 U from 10 keV up to 30 MeV

Comprehensive calculations of cross sections for neutron-induced reactions on 232–237 U targets are performed in this paper in the 10 keV–30 MeV incident energy range with the code EMPIRE–3.2 Malta. The advanced modelling and consistent calculation scheme are aimed at improving our knowledge of the neutron scattering and emission cross sections, and to assess the consistency of available evaluated libraries for light uranium isotopes. The reaction model considers a dispersive optical potential (RIPL 2408) that couples from five (even targets) to nine (odd targets) levels of the ground-state rotational band, and a triple-humped fission barrier with absorption in the wells described within the optical model for fission. A modified Lorentzian model (MLO) of the radiative strength function and Enhanced Generalized Superfluid Model nuclear level densities are used in Hauser-Feschbach calculations of the compound-nuclear decay that include width fluctuation corrections. The starting values for the model parameters are retrieved from RIPL. Excellent agreement with available experimental data for neutron emission and fission is achieved, giving confidence that the quantities for which there is no experimental information are also accurately predicted. Finally, deficiencies in existing evaluated libraries are highlighted.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗