Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLAME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Evidence of fluorescent carbon nanoparticles produced in premixed flames by time-resolved fluorescence polarization anisotropy

In this work we report on the analysis of combustion-generated nano-organic carbon (NOC) particles by means of time-resolved fluorescence polarization anisotropy (TRFPA). NOC samples were collected in water from nonsooting regions of ethylene/air laminar flames. The size of collected particles was determined with subnanometer accuracy by exploiting femtosecond laser pulses as an excitation source. Moreover, the TRFPA measurements were realized by selecting narrow-wavelength bands within the fluorescence spectrum. With this procedure, the ensemble-averaged size of particles emitting in the selected fluorescence band was determined, to provide additional information on composition and spectroscopic properties of the investigated particles. In particular, the NOC samples consisted of two groups of particles, preferentially emitting in two distinct wavelength bands: smaller particles, with diameter d=1-1.5nm, mostly fluorescing in the UV ({lambda}{proportional_to}300-470nm), and larger particles, d>2nm, fluorescing in the visible ({lambda}{proportional_to}490-580nm). The results of this work strongly support the attribution of UV/visible fluorescence generally detected in flames to nanoparticles. They also evidence that nanoparticles undergo a chemical transformation during the growth process, which produces a red shift in the fluorescence spectrum. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Prompt-NO formation in methane/oxygen/nitrogen flames seeded with oxygenated volatile organic compounds: Methyl ethyl ketone or ethyl acetate

In the present work, CH and NO profiles are determined using laser-induced fluorescence (LIF) measurements in eight low-pressure laminar flames of CH{sub 4}/O{sub 2}/N{sub 2} containing various amounts of methyl ethyl ketone or ethyl acetate with respect to the equivalence ratio. Relative CH LIF signals are calibrated using cavity ring-down spectroscopy (CRDS), while NO LIF calibration is performed in the burned gases of NO seeded flames. Temperature measurements are obtained using a coated Pt/Rh thermocouple and serve as temperature profiles input for Chemkin modeling. Volatile organic compound (VOC) submechanisms, previously validated upon major and intermediate species profiles measured using sampling techniques, are incorporated into the GDF-Kin 3.0{sub N}CN for the CH{sub 4} oxidation. This mechanism is adjusted and validated to predict the effect of VOCs seeding on CH and NO formation. It takes into account not only the CH and NO profiles but those previously measured. When methane is replaced by either MEK or EA, the NO mole fraction in the burned gases and the CH peak value are found to jointly decrease, indicating that NO is mainly formed according to the prompt-NO mechanism. According to the kinetic analysis, the VOC impact on NO formation is demonstrated. It is shown that CH radical formation, through the C1 sequence, mainly involves the CH{sub 3} radical, which is formed with the same propensity by one molecule of methane, MEK, or EA. Due to the methane replacement by VOC while the equivalence ratio is maintained constant, we found that the CH peak value decrease follows the total fuel volumetric flow rate decrease, yielding, an NO decrease in the burned gases. (author)

2-3-PENTANEDIONE↗

Simulation of a turbulent spray flame using coupled PDF gas phase and spray flamelet modeling

A joint mixture fraction-enthalpy probability density function (PDF) is proposed for the simulation of turbulent spray flames. The PDF transport equation is deduced and modeled. The interaction-by-exchange-with-the-mean (IEM) model that has been developed for gas-phase flows is extended to describe molecular mixing in nonreactive and reactive spray flows. The joint PDF transport equation is solved by a hybrid finite-volume and Lagrangian Monte Carlo method. Standard spray and turbulence models are used to describe the gas phase and the liquid phase. A turbulent methanol/air spray flame is simulated using the present method. Detailed chemistry is implemented through the spray flamelet model. The precalculated spray flamelet library for methanol/air combustion comprises 23 species and 168 elementary reactions. Thus, the model is capable of predicting the formation of radicals and of pollutants. Different values for the model constant C{sub {phi}} in the IEM model are tested. The numerical results for the gas velocity, the gas temperature, and the mass fraction of methanol vapor are compared with experimental data in the literature. Good agreement with experiment is obtained when C{sub {phi}}=2.0. Marginal PDFs of mixture fraction, enthalpy, and gas temperature are presented. The computed PDFs of mixture fraction are compared with the presumed standard {beta} function and modified {beta} function. The results show that the standard {beta} function fails to reproduce bimodal shapes observed in transported PDF computation, while the modified {beta} function, fits the computed PDFs very well. Moreover, joint PDFs of mixture fraction and enthalpy are presented and analyzed. The enthalpy and mixture fraction are strongly correlated. The samples that deviate from the linear correlation are due to the energy consumption of local spray evaporation. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ignition of turbulent swirling n-heptane spray flames using single and multiple sparks

This paper examines ignition processes of an n-heptane spray in a flow typical of a liquid-fuelled burner. The spray is created by a hollow-cone pressure atomiser placed in the centre of a bluff body, around which swirling air induces a strong recirculation zone. Ignition was achieved by single small sparks of short duration (2 mm; 0.5 ms), located at various places inside the flow so as to identify the most ignitable regions, or larger sparks of longer duration (5 mm; 8 ms) repeated at 100 Hz, located close to the combustion chamber enclosure so as to mimic the placement and characteristics of a gas turbine combustor surface igniter. The air and droplet velocities, the droplet diameter, and the total (i.e. liquid plus vapour) equivalence ratio were measured in inert flow by phase Doppler anemometry and sampling respectively. Fast camera imaging suggested that successful ignition events were associated with flamelets that propagated back towards the spray nozzle. Measurements of ignition probability with the single spark showed that localised ignition inside the spray is more likely to result in successful flame establishment when the spark is located in a region of negative velocity, relatively small droplet Sauter mean diameter, and mean equivalence ratio within the flammability limits. Ignition with the single spark was not possible at the location where the multiple spark experiments were performed. For those, the multiple spark sequence lasted approximately 1 to 5 s. It was found that a long spark sequence increases the ignition efficiency, which reached a maximum of 100% at the axial distance where the recirculation zone had maximum width. Ignition was not feasible with the spark downstream of about two burner diameters. Visualisation showed that small flame kernels emanate very often from the spark, which can be stretched as far as 20 mm from the electrodes by the turbulent velocity fluctuations. These kernels survive very little time. Successful overall ignition occurs at a random time from the spark initiation and, as in the case of the single spark, success is associated with kernels that move without getting extinguished towards the bluff body. The results demonstrate that the energy deposited by multiple sparks and spark stretching in a turbulent flow can have a spatially far-reaching effect to initiate combustion. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of carbonaceous nanoparticles in premixed C{sub 2}H{sub 4}-air flames and behind a spark ignition engine

Nanoparticle size distributions and their concentrations were studied in atmospheric premixed ethylene/air flames using photo ionization mass spectrometry (PIMS) and total organic carbon (TOC) calibration supplemented by differential mobility analysis (DMA). Focus of this study is the evolution of nanoparticles as a function of height above burner (HAB) and of the C/O ratio of the unburned gases. It was found that especially particles of the cluster type exhibit a sharp concentration drop by more than two orders of magnitude within a narrow C/O window which is close to the sooting threshold. Using DMA a decline by two orders of magnitude was found. These results suggest that at best only small concentrations of nanoparticles should be formed significantly below the sooting threshold. As these conditions prevail in a homogeneously charged IC engine no or only very small nanoparticle emissions are expected in the exhaust gas. This was indeed found for a small Otto engine driving a power generator unit. Using flame nanoparticle profiles as standard, absolute concentrations for their emissions could be deduced. These data were supported by additional DMA measurements. The calibration using TOC did not completely match the one based on the condensation particle counter of the DMA apparatus. (author)

33 ADVANCED PROPULSION SYSTEMS↗

Flow field studies of a new series of turbulent premixed stratified flames

This paper presents a new burner design for lean premixed stratified combustion for experiments to validate models for numerical simulations. The burner demonstrates combustion phenomena relevant to technological applications, where flames are often turbulent, lean premixed, and stratified. The generic burner was designed for high Reynolds number flows and can stabilize a variety of different lean premixed flames. The burner's design and its versatile operational conditions are introduced. Shear, stratification, and fuel type are parametrically varied to provide a sound database of related flow configurations. Reacting and corresponding non-reacting configurations are examined. Experimental setups and the results of laser Doppler velocimetry (LDV) and particle image velocimetry (PIV) are presented and discussed. LDV measurements provide radial profiles of mean axial velocity, mean radial velocity, and turbulent kinetic energy as well as integral time scales. High-speed PIV is introduced as a novel technique to determine integral time and length scales and provide 2D 2-component velocity fields and related quantities, such as vorticity. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical and morphological characterization of soot and soot precursors generated in an inverse diffusion flame with aromatic and aliphatic fuels

Knowledge of the chemical and physical structure of young soot and its precursors is very useful in understanding the paths leading to soot particle inception. This paper presents chemical and morphological characterization of the products generated in ethylene and benzene inverse diffusion flames (IDF) using different analytical techniques. The trend in the data indicates that the soot precursor material and soot particles generated in the benzene IDF have a higher degree of complexity than the samples obtained in the ethylene IDF, which is reflected by an increase in the aromaticity of the chloroform extracts observed by {sup 1}H NMR and FT-IR, and shape and size of soot particles obtained by TEM and HR-TEM. It is important to highlight that the soot precursor material obtained at the lower positions in the ethylene IDF has a significant contribution of aliphatic groups, which play an important role in the particle inception and mass growth processes during the early stages of soot formation. However, these groups progressively disappear in the samples taken at higher positions in the flame, due to thermal decomposition processes. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A model of particle nucleation in premixed ethylene flames

A detailed model of particle inception is proposed to delve into the physical structure and chemistry of combustion-formed particles. A sectional method is used, from a previously developed kinetic mechanism of particle formation with a double discretization of the particle phase in terms of C and H atom number. The present model also distinguishes between different particle structures based on their state of aggregation; single high molecular mass molecules, cluster of molecules and aggregates of clusters. The model predicts the mass of particles, hydrogen content and internal structure. It represents a first approach in following the chemical evolution and internal structure of the particles formed in flames, coupled with the main pyrolysis and oxidation of the fuel. The model is tested in atmospheric premixed flat flames of ethylene and the effect of fuel equivalence ratio on particle morphology is analyzed. Molecular weight growth of aromatic compounds and the inception of particles are predicted. The morphology of the particles and the number of molecules in the clusters at particle inception are also indicated. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerical study of a micro flow reactor at engine pressures: Flames with repetitive extinction and ignition and simulations with a reduced chemical model

Combustion in a narrow channel with an imposed temperature gradient is studied numerically at elevated pressure with engine-relevant fuels. Here, the focus is placed on unsteady flames with repetitive extinction and ignition (FREI) to determine the potential of this regime for fuel testing and calibration of reduced chemical mechanisms. First, it is shown that the FREI regime does occur at elevated pressures for sufficiently small tube diameters. The sensitivity of the extinction and ignition temperatures to low-temperature chemistry is found to be significantly enhanced at 25 bar compared to atmospheric conditions. The ignition and extinction temperatures differ by up to 100 K between PRF mixtures with varying octane numbers. Ternary mixtures of iso-octane/n-heptane/toluene and iso-octane/n-heptane/ethanol at similar research and motor octane numbers are also studied. Second, the potential of using data from the micro flow reactor to infer reaction rates is assessed. A reduced chemical mechanism combining a small fuel-dependent submechanism with a detailed fuel-independent submechanism for the core species chemistry is used for that purpose. Only the most sensitive fuel-dependent reactions are inferred. the calibrated reduced model is compared to a detailed model and good agreement in ignition delay times and laminar flame speeds is observed. Finally, this illustrates the potential of a micro flow reactor with a controlled temperature profile to test fuels and infer kinetic data.

33 ADVANCED PROPULSION SYSTEMS↗

Flame Chemistry Workshop: a perspective on challenges and strategic actions in combustion experiments and chemical kinetics modeling

Continued progress in the development of predictive models for combustion chemistry—including ignition and flame behavior, species evolution, and combustion system performance—relies on overcoming enduring and emerging challenges in experimental measurements, theoretical formulations, and chemical kinetics mechanism construction. As combustion science continues to coincide with advances in sustainable fuels development, plasma technologies, and automated modeling capabilities, the need for coordinated, community-driven strategies is essential. The Flame Chemistry Workshop (FCWS), held biennially before the International Symposium on Combustion, serves as a dedicated platform to identify, consolidate, and address these challenges in a structured and collaborative manner. This perspective arises from discussions at the 7th FCWS in Milan, Italy (2024), and presents a collective view of the critical barriers currently limiting progress. Across the five technical domains discussed during the 7th FCWS – sustainable fuels combustion, advanced diagnostics for combustion measurements, experiments and modeling in plasma combustion, artificial intelligence and automated methods for theory and mechanisms generation, and chemical kinetic models—a series of persistent and emerging scientific challenges were identified, highlighting the need for deeper integration between three areas: theory, experiments, and modeling. In conclusion, the present article concisely describes present challenges that were identified in each of the technical domains in an effort to streamline and coordinate solutions to accelerate progress in combustion science.

Chemical kinetics↗

Comparison of spherical harmonics method and discrete ordinates method for radiative transfer in a turbulent jet flame

Here, in this study, we systematically compared the accuracy and computational cost of two popular solution methods for the radiative transfer equation (RTE): the spherical harmonics method (P N ) and the discrete ordinates method (DOM). We first investigated convergence characteristics of different orders of P N and DOM in a series of 1D homogeneous configurations with varying optical thicknesses. Both solvers perform better for optically thicker cases. The accuracy of P N methods increases with its order, , but the gain in accuracy reduces with the increase in , i.e., improvement of P 7 over P 5 is less than that of P 3 over P 1 . This decreasing trend becomes more prominent as the optical thickness decreases. On the other hand, DOM’s accuracy increases almost linearly with the increase in the number of ordinates (or polar angles in this study) in all cases. While comparing the directional profile of radiative intensity, both solvers perform better when the radiative intensity is more isotropic. These solvers were then connected with a full spectrum k-distribution (FSK) spectral model and used to perform radiation-coupled simulations of a turbulent jet flame in an axi-symmetric cylindrical domain. Results obtained from P 1 to P 7 approximations for P N , and 2 x 4, 4 x 4, 4 x 8, 8 x 8 finite angles for DOM are compared with that from an optically thin model, and a reference solution from line-by-line (LBL) photon Monte Carlo (PMC) method. The choice of radiation solver shows a noticeable impact on the temperature distribution of the flame. The P N solvers lead to slightly higher radiant fractions and the DOM solvers lead to slightly lower radiant fractions than the PMC benchmark solution. Finally, the computational costs of each of these solvers are also reported and an intermittent evaluation / time blending scheme to improve the computational efficiency of radiation solvers in radiation-coupled simulations are also demonstrated.

42 ENGINEERING↗

Effects of ultrasonic processing on phase transition of flame-synthesized anatase TiO{sub 2} nanoparticles

The effect of ultrasonic processing on the phase transformation of flame-synthesized anatase TiO{sub 2} nanoparticles heated to the rutile phase was investigated. TiO{sub 2} nanoparticles of various sizes were prepared using a coflow hydrogen diffusion flame and an ultrasonic processor. Smaller nanoparticles having a similar portion of anatase phase using the ultrasonic processor were produced. On the basis of scanning electron microscopy images and specific surface areas, we observed that smaller nanoparticles tended to be sintered more easily than larger nanoparticles. From X-ray diffraction analysis, we demonstrated that when heated, TiO{sub 2} nanoparticles synthesized using the ultrasonic processor at 60% of its maximum amplitude were transformed from the anatase phase to the rutile phase more easily than those formed without or with the ultrasonic processor operated at 20% of its maximum amplitude.

36 MATERIALS SCIENCE↗

Characterization of diamond thin films deposited by a CO{sub 2} laser-assisted combustion-flame method

Diamond thin films were deposited by a CO{sub 2} laser-assisted O{sub 2}/C{sub 2}H{sub 2}/C{sub 2}H{sub 4} combustion-flame process. The effect of the deposition parameters, in particular the laser wavelength and power, on the film surface morphology, microstructure and phases present was the primary focus of the work. The laser power was set at 100, 400 and 800 W while the wavelength was varied and set at 10.591 {mu}m in the untuned condition and set at 10.532 {mu}m to resonantly match the CH{sub 2}-wagging vibrational mode of the C{sub 2}H{sub 4} molecule when in the tuned condition. When the laser was coupled to the combustion flame during deposition the diamond film growth was enhanced as the lateral grain size increased from 1 {mu}m to greater than 5 {mu}m. The greatest increase in grain size occurred when the wavelength was in the tuned condition. Scanning transmission electron microscopy images from focused-ion beam cross-sectioned samples revealed a sub-layer of smaller grains less than 1 {mu}m in size near the substrate surface at the lower laser powers and untuned wavelength. X-ray diffraction results showed a more intense Diamond (111) peak as the laser power increased from 100 to 800 W for the films deposited with the tuned laser wavelength. Micro-Raman spectra showed a diamond peak nearly twice as intense from the films with the tuned laser wavelength.

36 MATERIALS SCIENCE↗

Premixed flames subjected to extreme turbulence: Some questions and recent answers

It has been predicted that several changes will occur when premixed flames are subjected to the extreme levels of turbulence that can be found in practical combustors. Our report is a review of recent experimental and DNS results that have been obtained for the range of extreme turbulence, and it includes a discussion of cases that agree or disagree with predictions. “Extreme turbulence” is defined to correspond to a turbulent Reynolds number (Re Τ , based on integral scale) that exceeds 2800 or a turbulent Karlovitz number that exceeds 100, for reasons that are discussed in Section 2.1. Several data bases are described that include measurements made at Lund University, the University of Sydney, the University of Michigan and the U.S. Air Force Research Lab. The data bases also include DNS results from Sandia National Laboratory, the University of New South Wales, Newcastle University, the California Institute of Technology and the University of Cambridge. Several major observations are: (a) DNS now can be achieved for a realistic geometry (of the Lund University jet burner) even for extreme turbulence levels, (b) state relations (conditional mean profiles) from DNS and experiments do tend to agree with laminar profiles, at least for methane-air and hydrogen-air reactants that are not preheated, and (c) regime boundaries have been measured and they do not agree with predicted boundaries. Results indicate that the range of conditions for which flamelet models should be valid is larger than what was previously believed. Additional parameters have been shown to be important; for example, broken reactions occur if the “back-support” is insufficient due to the entrainment of cold gas into the product gas. Turbulent burning velocity measurements have been extended from the previous normalized turbulence levels (u’/S L ) of 24 up to a value of 163. Turbulent burning velocities no longer follow the trend predicted by Shchelkin but they tend to follow the trend predicted by Damköhler. The boundary where flamelet broadening begins was measured to occur at Re Taylor = 13.8, which corresponds to an integral scale Reynolds number (Re T ) of 2800. This measured regime boundary can be explained by the idea that flame structure is altered when the turbulent diffusivity at the Taylor scale exceeds a critical value, rather than the idea that changes occur when Kolmogorov eddies just fit inside a flamelet. A roadmap to extend DNS to complex chemistry and to higher Reynolds numbers is discussed. Exascale computers, machine learning, adaptive mesh refinement and embedded DNS show promise. Some advances are reviewed that have extended the use of line and planar PLIF and CARS laser diagnostics to studies that consider complex hydrocarbon fuels and harsh environments.

42 ENGINEERING↗

Conditional analysis of temperature and strain rate effects on dissipation structure in turbulent non-premixed jet flames

Here, this work presents results from simultaneous high-resolution temperature and velocity measurements in a series of turbulent non-premixed jet flames. The filtered Rayleigh scattering (FRS)-based temperature measurements demonstrate sufficient signal-to-noise (SNR) and spatial resolution to estimate the smallest scalar length scales and accurately determine dissipation rate fields. A comprehensive set of conditional statistics are used to characterize the small-scale structure, including the dependence of dissipation layer widths on Reynolds number, temperature, and dissipation magnitude. In general, the dissipation layer thickness decrease with increasing Reynolds number and increase with increasing temperature. However, dissipation layer widths show two distinct behaviors with respect to dissipation magnitude. For small dissipation values, increases in magnitude results in broadening of the dissipation layer, while for larger magnitude values of dissipation, the layer widths are thinned, highlighting the complexity of small-scale turbulent mixing. Additionally, measured ratios of the dissipation layer width to the Batchelor length scale are consistent across all Reynolds numbers and agree with previous studies in non-reacting flows. The unique aspect about the current set of measurements is the ability to examine the interaction of dissipation structure with turbulent flow parameters for the first time in turbulent non-premixed flames. Particularly, the strain rate/dissipation relationship is examined and compared to previous studies in non-reacting flows. It is found that the dissipation layers tend to align normal to the principal compressive strain axis and this tendency increases with increasing Reynolds number. For the lowest Reynolds number case, no dependence of the dissipation layer width nor dissipation rate magnitude on strain rate is found. However, for higher Reynolds numbers, a strong dependence of the dissipation layer width and dissipation rate magnitude on the principal compressive strain rate is observed. These results indicate the direct role of the compressive strain rate field on small-scale mixing structure in reacting flows.

42 ENGINEERING↗

The effect on soot and its gas precursors of doping ethylene with 2,2,4,6,6-pentamethyl-heptane in the nitrogen-fuel stream of a laminar non-premixed Planar Mixing Layer Flame (PMLF)

Synthetic Aviation Turbine Fuels (SATFs) are promising for reducing soot emissions from the aviation sector and diversifying Jet Fuel (JF) sources. Accurately predicting the combustion and emissions behavior of SATFs (and other JFs) necessitates robust experimental databases to elucidate the chemistry of long-chain iso-paraffins, which can compose up to two-thirds of SATF blends and whose behavior is considered to be well-represented by that of iso-dodecane isomers. Here, this study characterizes two laminar non-premixed Planar Mixing Layer Flames (PMLFs) with mild soot loads fueled by nitrogen-diluted ethylene, pure and doped with 2,2,4,6,6-pentamethyl-heptane, respectively. The two PMLFs have the same stoichiometric mixture fraction and total hydrocarbon mole fraction in the fuel stream (X F,F =X C2H4,F +X C12H26,F = 0.260), resulting in nearly the same maximum temperature (T max ≈1800 K) and simple identification of the effects of doping. Importantly, any horizontal PMLF cross-section has a self-similar structure that can be modeled as an equivalent One-Dimensional Counterflow Flame (1D-CF) with vanishingly small strain rate (a). The cross-section at a Height Above the Burner (HAB) of 50 mm is characterized in terms of C 0 -C 18 gas species using capillary sampling followed by GC-MS analyses. Laser-Induced Emission Spectroscopy (LIES) quantifies the soot volume fraction (ƒ v ) profiles at HAB=25 and 50 mm where Elastic Laser Light Scattering (E-LLS) is performed to determine the a of the equivalent 1D-CFs and the profile of the E-LLS equivalent diameter ( d 6,3 ) of soot. The substitution of 1500 ppm of ethylene with 2,2,4,6,6-pentamethyl-heptane causes an increase of ≈1.5 in the concentrations of several polycyclic aromatic hydrocarbons and fv. Concurrently, the measured d 6,3 doubles in the oxidizer stream, yet remains the same in the fuel stream, at HAB=50 mm. Instead, at HAB= 25 mm, the iso-dodecane doping does not affect the d 6,3 profile in either stream. The experimental results partially validate the chemical reactions and soot formation kinetic model developed at Lawrence Livermore National Laboratory and provide directions to further improve its predictions.

Iso-dodecane (2,2,4,6,6-Pentamethyl-Heptane)↗

A mathematical programming approach for the optimal placement of flame detectors in petrochemical facilities

Flame detectors provide an important layer of protection for personnel in petrochemical plants, but effective placement can be challenging. A mixed-integer nonlinear programming formulation is proposed for optimal placement of flame detectors while considering non-uniform probabilities of detection failure. We show that this approach allows for the placement of fire detectors using a fixed sensor budget and outperforms models that do not account for imperfect detection. In this study, we develop a linear relaxation to the formulation and an efficient solution algorithm that achieves global optimality with reasonable computational effort. We integrate this problem formulation into the Python package, Chama, and demonstrate the effectiveness of this formulation on a small test case and on two real-world case studies using the fire and gas mapping software, Kenexis Effigy.

47 OTHER INSTRUMENTATION↗

Characterization of brominated flame retardants from e-waste components in China

Highlights: • BFRs in housing plastics and PCBs from e-waste recycling enterprises in China were systematically examined. • Both PBDEs and TBBPA were detectable in most samples. • There is an apparent decreasing trend of BFRs from housing plastics and PCBs in China. • BFRs could be transferred into the recycled products those for other purpose use. - Abstract: Many studies show that high levels of many toxic metals and persistent and bio-accumulative chemicals have been found in electronic waste (e-waste) dismantling sites and their surrounding environmental media. Both flame-retardant plastic housing materials and printed circuit boards (PCBs) could be the major contributors. However, relatively little work has focused on the use or content of toxic substances and their changing in scrap housing materials and PCBs from home appliances. This study evaluated the existence of brominated flame retardants (BFRs, including polybrominated diphenyl ethers (PBDEs) and Tetrabromobisphenol-A (TBBPA)) in housing plastics and PCBs from home appliances collected from various e-waste recyclers in China. These were then analyzed for the potential migration of BFRs from the e-waste components into their recycled products. The results show that both PBDEs and TBBPA were found with high level in most of e-waste samples, indicating that the widespread use of BFRs in home appliances are entering into the end-of-life stage. For the plastics samples, CRT TVs and LCD monitors should be given priority for the control of BFRs. Regarding PBDEs, the dominant congeners of BDE-209 in the plastics samples contributed 90.72–93.54% to the total concentrations of PBDEs, yet there are large variations for PCBs samples: BDE-28, -47, -99, and -153 were also important congeners compositions, except for BDE-209. Compared with previous studies, the BFRs concentrations in current Chinese e-waste are trending to decline. This study also found that BFRs in housing plastics and PCBs will be transferred into the recycled products with other purpose use, and the new products could have highly enriched capacities for BFRs. The obtained results could be helpful to manage e-waste and their components properly in order to minimize associated environmental and health risks of BFRs, particularly for their further reuse.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗