SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Bayesian optimization (BO) was implemented to improve a membrane electrode assembly CO 2 electroreduction device undergoing pulsed operation.
We report electronically nonadiabatic dynamics calculations including spin-orbit coupling for the photodissociation of CH{sub 2}ClBr to yield Cl({sup 2}P{sub 3/2}), Cl({sup 2}P{sub 1/2}), Br({sup 2}P{sub 3/2}), and Br({sup 2}P{sub 1/2}). The potential energy is a 24 Multiplication-Sign 24 matrix (divided up here into four 6 Multiplication-Sign 6 blocks in a first approximation to the problem), in a spin-coupled fully diabatic representation obtained by combining the spin-free fourfold way with single-center spin-orbit coupling constants. The spin-free calculations are carried out by multiconfiguration quasidegenerate perturbation theory, and the fully diabatic potentials including spin-orbit coupling are fit to a matrix reactive force field. The dynamics are carried out by the coherent switches with decay of mixing method in the diabatic representation. The results show qualitative agreement with experiment.
A two channel oblique electron cyclotron emission (ECE) radiometer was installed on the DIII-D tokamak and interfaced to four gyrotrons. Oblique ECE was used to toroidally and radially localize rotating magnetic islands and so assist their electron cyclotron current drive (ECCD) stabilization. In particular, after manipulations operated by the interfacing analogue circuit, the oblique ECE signals directly modulated the current drive in synch with the island rotation and in phase with the island O-point, for a more efficient stabilization. Apart from the different toroidal location, the diagnostic view is identical to the ECCD launch direction, which greatly simplified the real-time use of the signals. In fact, a simple toroidal extrapolation was sufficient to lock the modulation to the O-point phase. This was accomplished by a specially designed phase shifter of nearly flat response over the 1-7 kHz range. Moreover, correlation analysis of two channels slightly above and below the ECCD frequency allowed checking the radial alignment to the island, based on the fact that for satisfactory alignment the two signals are out of phase.
The Californium Rare Isotope Breeder Upgrade is a new radioactive beam facility for the Argonne Tandem Linac Accelerator System (ATLAS). The facility utilizes a {sup 252}Cf fission source coupled with an electron cyclotron resonance ion source to provide radioactive beam species for the ATLAS experimental program. The californium fission fragment distribution provides nuclei in the mid-mass range which are difficult to extract from production targets using the isotope separation on line technique and are not well populated by low-energy fission of uranium. To date the charge breeding program has focused on optimizing these mid-mass beams, achieving high charge breeding efficiencies of both gaseous and solid species including 14.7% for the radioactive species {sup 143}Ba{sup 27+}. In an effort to better understand the charge breeding mechanism, we have recently focused on the low-mass species sodium and potassium which up to present have been difficult to charge breed efficiently. Unprecedented charge breeding efficiencies of 10.1% for {sup 23}Na{sup 7+} and 17.9% for {sup 39}K{sup 10+} were obtained injecting stable Na{sup +} and K{sup +} beams from a surface ionization source.
Explore the source record for details and available documents.
We present results from ab-initio, self-consistent density functional theory calculations of electronic and related properties of zinc blende boron phosphide (zb-BP). We employed a local density approximation potential and implemented the linear combination of atomic orbitals formalism. This technique follows the Bagayoko, Zhao, and Williams method, as enhanced by the work of Ekuma and Franklin. The results include electronic energy bands, densities of states, and effective masses. The calculated band gap of 2.02 eV, for the room temperature lattice constant of a=4.5383 Å, is in excellent agreement with the experimental value of 2.02±0.05 eV. Our result for the bulk modulus, 155.7 GPa, agrees with experiment (152–155 GPa). Our predictions for the equilibrium lattice constant and the corresponding band gap, for very low temperatures, are 4.5269 Å and 2.01 eV, respectively.
In order to investigate the response of materials to extreme conditions, there are several approaches to depositing extremely high concentrations of energy into very small volumes of material, including ultrafast laser and swift heavy ion (SHI) irradiation. In this study, crystalline-to-crystalline phase transformations in cubic Gd 2 O 3 and monoclinic ZrO 2 have been investigated using ultrafast laser irradiation. The phases produced by the extreme conditions of irradiation were characterized by grazing incidence x-ray diffraction (GIXRD) and Raman spectroscopy. Gd 2 O 3 exhibited a cubic-to-monoclinic phase transformation, as evidenced by the appearance of the monoclinic (40$\bar{2}$), (003), (310), and (112$\bar{2}$) peaks in the GIXRD pattern and of four A g and three B g Raman modes. ZrO 2 underwent a monoclinic-to-tetragonal phase transformation, as evidenced by the emergence of the tetragonal (101) peak in the GIXRD pattern and of E g and A 1g Raman modes. The new phases formed by ultrafast laser irradiation are high temperature polymorphs of the two materials. No evidence of amorphization was seen in the GIXRD data, though Raman spectroscopy indicated point defect accumulation. These results are identical to those produced by irradiation with SHIs, which also deposit energy in materials primarily through electronic excitation. Finally, the similarity in damage process and material response between ultrafast laser and SHI irradiation suggests a fundamental relationship between these two techniques.
Direct deposition of barrier films by atomic layer deposition (ALD) onto printed electronics presents a promising method for packaging devices. Films made by ALD have been shown to possess desired ultrabarrier properties, but face challenges when directly grown onto surfaces with varying composition and topography. Challenges include differing nucleation and growth rates across the surface, stress concentrations from topography and coefficient of thermal expansion mismatch, elastic constant mismatch, and particle contamination that may impact the performance of the ALD barrier. In such cases, a polymer smoothing layer may be needed to coat the surface prior to ALD barrier film deposition. We present the impact of architecture on the performance of aluminum oxide (Al{sub 2}O{sub 3})/hafnium oxide (HfO{sub 2}) ALD nanolaminate barrier films deposited on fluorinated polymer layer using an optical calcium (Ca) test under damp heat. It is found that with increasing polymer thickness, the barrier films with residual tensile stress are prone to cracking resulting in rapid failure of the Ca sensor at 50 °C/85% relative humidity. Inserting a SiN{sub x} layer with residual compressive stress between the polymer and ALD layers is found to prevent cracking over a range of polymer thicknesses with more than 95% of the Ca sensor remaining after 500 h of testing. These results suggest that controlling mechanical properties and film architecture play an important role in the performance of direct deposited ALD barriers.
In this study, the electronic and optical properties of bulk and monolayer PdSe 2 are investigated using firstprinciples calculations. Using the modified Becke-Johnson potential, we find semiconductor behavior for both bulk and monolayer PdSe 2 with indirect gap values of 0.03 eV for bulk and 1.43 eV for monolayer, respectively. Our sheet optical conductivity results support this observation and show similar anisotropic feature in the 2D plane. We further study the thermoelectric properties of the 2D PdSe 2 using Blotzmann transport model and find interestingly high Seebeck coefficients (>200 μV/K) for both p- and n-type up to high doping level (–2 x 10 13 cm 2 ) with an anisotropic character in an electrical conductivity suggesting better thermoelectric performance along y direction in the plane.V
Pyrolytic dissociation of Cl{sub 2} is employed to dope helium droplets with single Cl atoms. Sequential addition of NH{sub 3} to Cl-doped droplets leads to the formation of a complex residing in the entry valley to the substitution reaction Cl + NH{sub 3} → ClNH{sub 2} + H. Infrared Stark spectroscopy in the NH stretching region reveals symmetric and antisymmetric vibrations of a C{sub 3v} symmetric top. Frequency shifts from NH{sub 3} and dipole moment measurements are consistent with a ClNH{sub 3} complex containing a relatively strong two-center three-electron (2c–3e) bond. The nature of the 2c–3e bonding in ClNH{sub 3} is explored computationally and found to be consistent with the complexation-induced blue shifts observed experimentally. Computations of interconversion pathways reveal nearly barrierless routes to the formation of this complex, consistent with the absence in experimental spectra of two other complexes, NH{sub 3}Cl and Cl–HNH{sub 2}, which are predicted in the entry valley to the hydrogen abstraction reaction Cl + NH{sub 3} → HCl + NH{sub 2}.
One of the challenges of interpreting electronic circular dichroism (ECD) band spectra is that different states may have different rotatory strength signs, determined by their absolute configuration. If the states are closely spaced and opposite in sign, observed transitions may be washed out by nearby states, unlike absorption spectra where transitions are always positive additive. To accurately compute ECD bands, it is necessary to compute a large number of excited states, which may be prohibitively costly if one uses the linear-response time-dependent density functional theory (TDDFT) framework. Here we implement a real-time, atomic-orbital based TDDFT method for computing the entire ECD spectrum simultaneously. The method is advantageous for large systems with a high density of states. In contrast to previous implementations based on real-space grids, the method is variational, independent of nuclear orientation, and does not rely on pseudopotential approximations, making it suitable for computation of chiroptical properties well into the X-ray regime.
In this work, we investigate how geometric changes influence the static dipole polarizability ($α$) of a water molecule by explicitly computing the corresponding dipole polarizability surface (DPS) across 3125 total (1625 symmetry-unique) geometries using linear response coupled cluster theory including single, double, and triple excitations (LR-CCSDT) and the doubly augmented triple-$ζ$ basis set (d-aug-cc-pVTZ). Analytical formulae based on power series expansions of this $ab initio$ surface are generated using linear least-squares analysis and provide highly accurate estimates of this quantity as a function of molecular geometry (i.e., bond and angle variations) in a computationally tractable manner. An additional database, which consists of 25 representative molecular geometries and incorporates a more thorough treatment of both basis sets and core electron effects, is provided as a current benchmark for this quantity and the corresponding leading-order $C_6$ dispersion coefficient. This database has been utilized to assess the importance of these effects as well as the relative accuracy that can be obtained using several quantum chemical methods and a library of density functional approximations. In addition to high-level electron correlation methods (like CCSD) and our analytical least-squares formulae, we find that the SCAN0, PBE0, MN15, and B97-2 hybrid functionals yield the most accurate descriptions of the molecular polarizability tensor in H 2 O. Using first-order perturbation theory, we compute the zero-point vibrational correction to $α$ at the CCSDT/d-aug-cc-pVTZ level and find that this correction contributes approximately 3% to the isotropic ($α$ iso ) and nearly 50% to the anisotropic ($α$ aniso ) polarizability values. In doing so, we find that $α$ iso = 9.8307 bohr 3 , which is in excellent agreement with the experimental value of 9.83 ± 0.02 bohr 3 provided by Russell and Spackman. The DPS reported herein provides a benchmark-quality quantum mechanical estimate of this fundamental quantity of interest and should find extensive use in the development (and assessment) of next-generation force fields and machine-learning based approaches for modeling water in complex condensed-phase environments.
Electrical and thermal transport measurements were performed on thin films of the electron-doped superconductor Sm 2- x Ce x CuO 4- y (x = 0.13 - 0.19) in order to study the evolving nature of the charge carriers from the under-doped to over-doped regime. A temperature versus cerium content (T - x) phase diagram has been constructed from the electrical transport measurements, yielding a superconducting region similar to that found for other electron-doped superconductors. Thermopower measurements show a dramatic change from the underdoped region (x < 0.15) to the overdoped region (x > 0.15). Application of the Fisher–Fisher–Huse (FFH) vortex glass scaling model to the magnetoresistance data was found to be insufficient to describe the data in the region of the vortex-solid to vortex-liquid transition. It was found instead that the modified vortex glass scaling model of Rydh, Rapp, and Anderson provided a good description of the data, indicating the importance of the applied field on the pinning landscape. A magnetic field versus temperature (H - T) phase diagram has also been constructed for the films with $x\geqslant 0.14$ , displaying the evolution of the vortex glass melting lines H g (T) across the superconducting regime.
Explore the source record for details and available documents.
Abstract The hot-tail mechanism of runaway electron (RE) production (Harvey et al 2000 Phys. Plasmas 7 4590) is the primary source of RE in the case of rapidly cooling tokamak plasma. Quantifying this mechanism is very important as it can provide most of the post-thermal-quench (TQ) current, or a seed current for the secondary source of RE through the avalanche mechanism. An analytic model which omits pitch-angle scattering is often used in literature for estimating the hot-tail RE density (Smith and Verwichte 2008 Phys. Plasmas 15 072502). In the present study, we use the CQL3D bounce-averaged Fokker–Planck code (Harvey and McCoy 1992 Proc. IAEA Technical Committee Meeting on Advances in Simulation and Modeling of Thermonuclear Plasmas p 527) to test the limits of validity of the model. In particular, we examine the cases of Z = 1 and Z = 18 ions, for sets of different initial temperature, density, electric field and the characteristic time of temperature decay. We show that for Z = 1 plasma, the ratio of RE density computed by CQL3D to that estimated from the model is within 0.6–6.0 in studied cases. For the Z = 18 case, this factor is systematically a much smaller number, typically 0.02–0.6. We suggest a simple correction to the model that narrows down the range of this ratio to 0.3–3.8 in all of the cases, including Z = 1 and Z = 18 plasmas.
.
N/A
The electronic structural and phonon properties of Na 2-α M α ZrO 3 (M ¼ Li,K, α = ¼ 0.0,0.5,1.0,1.5,2.0) are investigated by first-principles density-functional theory and phonon dynamics. The thermodynamic properties of CO 2 absorption and desorption in these materials are also analyzed. With increasing doping level α, the binding energies of Na 2-α Li α ZrO 3 are increased while the binding energies of Na 2-α K α ZrO 3 are decreased to destabilize the structures. The calculated band structures and density of states also show that, at the same doping level, the doping sites play a significant role in the electronic properties. The phonon dispersion results show that few soft modes are found in several doped configurations, which indicates that these structures are less stable than other configurations with different doping levels. From the calculated relationships among the chemical-potential change, the CO 2 pressure, and the temperature of the CO 2 capture reactions by Na 2-α M α ZrO 3 , and from thermogravimetric-analysis experimental measurements, the Li- and K-doped mixtures Na 2-α M α ZrO 3 have lower turnover temperatures (T t ) and higher CO 2 capture capacities, compared to pure Na 2 ZrO 3 . The Li-doped systems have a larger T t decrease than the K-doped systems. When increasing the Li-doping level α, the T t of the corresponding mixture Na 2-α Li α ZrO 3 decreases further to a low-temperature range. However, in the case of K-doped systems Na 2-α K α ZrO 3 , although doping K into Na 2 ZrO 3 initially shifts its T t to lower temperatures, further increases of the K-doping level α causes T t to increase. Therefore, doping Li into Na 2 ZrO 3 has a larger influence on its CO 2 capture performance than the K-doped Na 2 ZrO 3 . Compared with pure solidsM 2 ZrO 3 , after doping with other elements, these doped systems’ CO 2 capture performances are improved.