Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Compression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Compressive behavior of unidirectional fibrous composites

The longitudinal compressive behavior of unidirectional fiber composites was investigated by using the Illinois Institute of Technology Research Institute (IITRI) test method with thick and thin test specimens. The test data obtained are interpreted by means of stress/strain curves from back-to-back strain gages, examination of fracture surfaces by scanning electron microscope, and predictive equations for distinct failure modes including fiber compression failure. Euler buckling, delamination, and flexure. The results show that longitudinal compressive fracture is induced by a combination of delamination, flexure, and fiber tier breaks. No distinct fracture surface characteristics can be associated with unique failure modes. An equation is described that can be used to extract the longitudinal compressive strength from the longitudinal tensile and flexural strengths of the same composite system.

Sinclair, J. H.↗

ROLM computers in the flight testing of the Fokker F29 aircraft

The design, development, installation, and operation of the test equipment (MRVS) is discussed. The main feature of the MRVS is continuous recording on an instrumentation recorder data of up to 1500 parameters with a total sample rate of up to 10,000 samples per second. In order to compress the evaluation and calibration time period, the following additional requirements were set for two test systems: (1) recording of selected parameters, time tagged on computer compatible tape (CCT); (2) recording of selected high bandwidth signals and ad hoc parameters on analog tape; (3) onboard presentation of calibrated parameter data, in engineering units, in numerical as well as graphical form for: system checkout during pre-, in- and post-flight, and quick look analysis during in-flight; (4) real time presentation on the ground by telemetry for: flight monitoring, takeoff and landing measurements, and noise measurements; and (5) data processing on the ground on the Fokker-NLR computer network.

Manders, P. J.↗

Studies on image compression and image reconstruction

During this six month period our works concentrated on three, somewhat different areas. We looked at and developed a number of error concealment schemes for use in a variety of video coding environments. This work is described in an accompanying (draft) Masters thesis. In the thesis we describe application of this techniques to the MPEG video coding scheme. We felt that the unique frame ordering approach used in the MPEG scheme would be a challenge to any error concealment/error recovery technique. We continued with our work in the vector quantization area. We have also developed a new type of vector quantizer, which we call a scan predictive vector quantization. The scan predictive VQ was tested on data processed at Goddard to approximate Landsat 7 HRMSI resolution and compared favorably with existing VQ techniques. A paper describing this work is included. The third area is concerned more with reconstruction than compression. While there is a variety of efficient lossless image compression schemes, they all have a common property that they use past data to encode future data. This is done either via taking differences, context modeling, or by building dictionaries. When encoding large images, this common property becomes a common flaw. When the user wishes to decode just a portion of the image, the requirement that the past history be available forces the decoding of a significantly larger portion of the image than desired by the user. Even with intelligent partitioning of the image dataset, the number of pixels decoded may be four times the number of pixels requested. We have developed an adaptive scanning strategy which can be used with any lossless compression scheme and which lowers the additional number of pixels to be decoded to about 7 percent of the number of pixels requested! A paper describing these results is included.

Sayood, Khalid↗

Similarity rules for effects of sidewall boundary layer in two-dimensional wind tunnels

A simple analysis of the interaction of the model pressure field with the boundary layer on an unventilated wind tunnel wall is presented. It is shown that the effects of this interaction are similar to compressibility effects for sidewall boundary layers in two dimensional wind tunnels. This similarity is used to derive modified forms of the Prandtl Glauert rule for subsonic flow and the von Karman rule for transonic flow which are validated by comparison with experimental data. The three dimensional interaction problem is discussed, and it is shown that model pressure field/wall boundary layer interaction effects are not similar to compressibility effects in three dimensional wind tunnels.

Barnwell, R. W.↗

Compression of the Venusian ionosphere on May 10, 1979, by the interplanetary shock generated by the solar eruption of May 8, 1979

Previous solar optical and solar wind conditions observations are summarized, and Venus ionopause data taken with the Helios 2 and Pioneer Venus Orbiter spacecraft are presented for orbits 150-161. Those orbits encountered the results of an interplanetary shock wave initiated by a solar eruption and coronal transient of May 8, 1979. A significant compression of the dayside Venus ionosphere was detected two days later. The solar observations had been made in H-alpha at 10 solar radii, at 0.3 AU, and at 0.7 AU, using plasma and magnetometer monitoring of the shock wave.

Dryer, M.↗

Information compression in the context model

The Context Model provides a formal framework for the representation, interpretation, and analysis of vague and uncertain data. The clear semantics of the underlying concepts make it feasible to compare well-known approaches to the modeling of imperfect knowledge like that given in Bayes Theory, Shafer's Evidence Theory, the Transferable Belief Model, and Possibility Theory. In this paper we present the basic ideas of the Context Model and show its applicability as an alternative foundation of Possibility Theory and the epistemic view of fuzzy sets.

Gebhardt, Joerg↗

Compaction by impact of unconsolidated lunar fines

New Hugoniot and release adiabat data for 1.8 g/cu cm lunar fines in the approximately 2 to 70 kbar range demonstrate that upon shock compression intrinsic crystal density (approximately 3.1 g/cu cm) is achieved under shock stress of 15 to 20 kbar. Release adiabat determinations indicate that measurable irreversible compaction occurs upon achieving shock pressures above approximately 4 kbar. For shocks in the approximately 7 to 15 kbar range, the inferred post-shock specific volumes observed decrease nearly linearly with increasing peak shock pressures. Upon shocking to approximately 15 kbar the post-shock density is approximately that of the intrinsic minerals. If the present data are taken to be representative of the response to impact of unconsolidated regolith material on the moon, it is inferred that the formation of appreciable quantities of soil breccia can be associated with the impact of meteoroids or ejecta at speeds as low as approximately 1 km/sec.

Ahrens, T. J.↗

Image coding of SAR imagery

Five coding techniques in the spatial and transform domains have been evaluated for SAR image compression: linear three-point predictor (LTPP), block truncation coding (BTC), microadaptive picture sequencing (MAPS), adaptive discrete cosine transform (ADCT), and adaptive Hadamard transform (AHT). These techniques have been tested with Seasat data. Both LTPP and BTC spatial domain coding techniques provide very good performance at rates of 1-2 bits/pixel. The two transform techniques, ADCT and AHT, demonstrate the capability to compress the SAR imagery to less than 0.5 bits/pixel without visible artifacts. Tradeoffs such as the rate distortion performance, the computational complexity, the algorithm flexibility, and the controllability of compression ratios are also discussed.

Chang, C. Y.↗

Engineering studies related to geodetic and oceanographic remote sensing using short pulse techniques

For the Skylab S-193 radar altimeter, data processing flow charts and identification of calibration requirements and problem areas for defined S-193 altimeter experiments are presented. An analysis and simulation of the relationship between one particular S-193 measurement and the parameter of interest for determining the sea surface scattering cross-section are considered. For the GEOS-C radar altimeter, results are presented for system analyses pertaining to signal-to-noise ratio, pulse compression threshold behavior, altimeter measurement variance characteristics, desirability of onboard averaging, tracker bandwidth considerations, and statistical character of the altimeter data in relation to harmonic analysis properties of the geodetic signal.

Miller, L. S.↗

Planning Coverage Campaigns for Mission Design and Analysis: Clasp for the Proposed DESDynI Mission

Mission design and analysis present challenges in that almost all variables are in constant flux, yet the goal is to achieve an acceptable level of performance against a concept of operations, which might also be in flux. To increase responsiveness, our approach is to use automated planning tools that allow for the continual modification of spacecraft, ground system, staffing, and concept of operations while returning metrics that are important to mission evaluation, such as area covered, peak memory usage, and peak data throughput. We have applied this approach to DESDynI (Deformation, Ecosystem Structure, and Dynamics of Ice) mission design concept using the CLASP (Compressed Large-scale Activity Scheduler/Planner) planning system [7], but since this adaptation many techniques have changed under the hood for CLASP and the DESDynI mission concept has undergone drastic changes, including that it has been renamed the Earth Radar Mission. Over the past two years, we have run more than fifty simulations with the CLASP-DESDynI adaptation, simulating different mission scenarios with changing parameters including targets, swaths, instrument modes, and data and downlink rates. We describe the evolution of simulations through the DESDynI MCR (Mission Concept Review) and afterwards.

DESDynI (Deformation, Ecosystem Structure, and Dyn↗

The plastic compressibility of 7075-T651 aluminum-alloy plate

The change in volume, and therefore the change in mass density, of an aluminum alloy was measured in uniaxial tension using clip-on extensometers. The experimental data do not agree with the assumption of plastic incompressibility found in the classical theories of plasticity. In fact, the elastic and plastic volume changes are of the same order of magnitude. Plastic anisotropy is thought to be the prime cause of this plastic compressibility.

Freed, A. D.↗

Turbulent properties of a compressible boundary layer.

Turbulent shear-stress, eddy-viscosity, mixing-length, heat-flux and Prandtl number distributions across a hypersonic turbulent boundary layer have been determined from the 'time-averaged' conservation equations using experimental mean profile data obtained at several streamwise locations in a fully developed turbulent boundary layer with negligible pressure gradient. The eddy-viscosity, mixing-length and Prandtl number results show general agreement with previous incompressible and adiabatic compressible correlations. However, when the turbulent Prandtl number is defined using total enthalpy as opposed to static enthalpy no clear correlation of the results in the outer portion of the boundary layer could be obtained.

Horstman, C. C.↗

Thermal/Mechanical Response of a Polymer Matrix Composite at Cryogenic Temperatures

In order for polymeric-matrix composites to be considered for use as structural materials in the next generation of space transportation systems, the mechanical behavior of these materials at cryogenic temperatures must be investigated. This paper presents experimental data on the residual mechanical properties of a carbon-fiber polymeric composite, IM7/PETI-5, both before and after aging. Both tension and compression modulus and strength were measured at room temperature, -196C, and -269 C on five different laminate configurations. One set of specimens was aged isothermally for 576 hours at -184 C in an unconstrained state. Another set of corresponding specimens was aged under constant uniaxial strain for 576 hours at -184 C. Based on the experimental data presented, it is shown that trends in stiffness and strength that result from changes in temperature are not always smooth and consistent. Moreover, it is shown that loading mode and direction are significant for both stiffness and strength, and aging at cryogenic temperature while under load can alter the mechanical properties of pristine, un-aged laminates made of IM7/PETI-5 material.

Whitley, Karen S.↗

SHELL STABILITY PROBLEMS IN THE DESIGN OF LARGE SPACE VEHICLE BOOSTERS

A discussion of the current methods used to design the Saturn type booster shell structures is presented covering bending and axial compression, with and without internal pressure. Problem areas encountered in the application of available shell stability data to these designs are delineated; as well as, suggested areas of future research for shell configurations anticipated in advanced designs.

LAUNCH VEHICLE↗

Are the lunar seismic signals compatible with a deep layer of fine powder.

It is shown that a sudden change in the seismic wave velocity at 25 km can be interpreted in terms of a single type of material, namely the fine rock powder that is so abundant on the lunar surface. An investigation conducted by Toksoz et al. (1972) is considered. Toksoz et al. rule out a deep powder layer and derive a velocity profile for powders from laboratory data. Differences regarding powder densification between laboratory tests and actual lunar conditions due to much longer compression times are pointed out.

Jones, B. W.↗

Observations of moon-plasma interactions by orbital and surface experiments

Extensive magnetic field observations together with crucial plasma measurements by the Explorer 35 lunar orbiter and Apollo surface and orbital experiments have established the basic nature of the moon's interaction with the solar wind and interplanetary magnetic field. The effective absorption of the incident solar wind by the moon creates a plasma void or cavity behind the moon. The cavity-associated magnetic signature is characterized by an enhancement in magnetic field magnitude B within the cavity as compared with the mean level of B in the surrounding interplanetary plasma and dips or decreases in B near the cavity boundaries with the solar wind. Apollo particle and field measurements on the lunar surface have provided evidence of a regional interaction of the highly conducting solar wind with lunar remanent magnetic fields. Simultaneous plasma and magnetic field data, from the spectrometer and the lunar surface magnetometer at the Apollo 12 location, show the compression of the local remanent field by large solar wind and magnetosheath plasma dynamic pressures.

Schubert, G.↗

Triggering of substorms by solar wind discontinuities

The probability of triggering of polar substorms by a large-scale magnetospheric compression associated with a discontinuity in the solar wind has been examined statistically using ground magnetogram data, AE index data and satellite geomagnetic data on 125 sudden storm commencements observed during 1967-1970. The triggering probability was found to depend on the amplitude of the sudden storm commencement and on the degree of preceding AE activity. In almost all cases the triggering occurred when the B-Z component of the interplanetary magnetic field was negative or decreasing during the 30 min before the passage of the discontinuity. Transient geomagnetic responses with a time scale of Alfven wave propagation in the polar cap also depend on interplanetary magnetic field conditions.

Kokubun, S.↗

Finite element solution of turbulent and reacting compressible three-dimensional flows

Results of detailed numerical evaluation of turbulent and reacting three-dimensional compressible flows are presented. These solutions were obtained using a finite element algorithm to solve the system of explicitly non-linear partial differential equations governing three-dimensional, confined unidirectional turbulent flow of a compressible, reacting fluid. Assessments are made of solution accuracy and convergence, including detailed comparisons to experimental data.

Baker, A. J.↗