Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DIRECT REACTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Atomic-Scale Structural Mapping of Active Sites in Monolayer PGM-Free Catalysts by Low-Voltage 4D-STEM

Two-dimensional (2D) materials have attracted a large amount of attention in both basic and applied fields, and scanning transmission electron microscopy (STEM) is often uniquely well-suited for characterizing the atomic-scale structure of these materials [1-4]. As a result, STEM is poised to significantly impact progress on platinum group metal (PGM)-free catalysts, which are currently under intense development to enable low-cost, commercially viable hydrogen fuel cells [5]. While recent advancements have resulted in fuel cell performance comparable to Pt catalysts by some measures [6], cell durability remains a significant challenge, limiting practical applications [7]. Catalytically active sites in PGM-free materials are proposed to be FeN4 complexes embedded in a graphene lattice (Fig. 1b) within layered or other larger materials, but this is still under debate largely due to the range of potential actives sites predicted by computational methods and lack of methods for directly validating these models [5]. Fundamental insights into the atomic structure and resulting degradation pathways of proposed active sites are therefore needed to fully understand and control cell performance and durability [6].2D materials typically make ideal samples for STEM, but those within PGM-free catalysts present additional challenges since these materials are often defect-rich, with a high density of edges, dopant atoms, etc., which significantly increase susceptibility to beam damage at standard operating voltages. This makes analysis of potential FeN4 active sites particularly challenging, since a large proportion of Fe exists at edge sites where beam-induced atomic displacements can prohibit high-resolution structural characterization [6]. Conventional dark-field imaging compounds this problem by producing less signal for a given dose and being less sensitive to light elements than dose-efficient phase contrast imaging techniques such as those enabled by four-dimensional (4D)-STEM [8-10] (Fig. 1a). Consequently, active site structural analysis is often left to methods such as low-resolution imaging combined with quantum chemical calculations [6], which hinders accurate determination of reaction and degradation mechanisms.Here, we demonstrate direct atomic-scale structural mapping of FeN4 sites by performing low-voltage 4D-STEM on a model PGM-free catalyst system with many exposed monolayer regions. To accomplish this, we pair a 30 keV aberration-corrected probe with a fast pixelated detector that has optimal performance at low beam voltages [11]. This enables us to simultaneously image light and heavy elements with high signal-to-noise by center-of-mass analysis (Fig. 1c) while minimizing beam-induced atomic displacements at sensitive sites. The monolayer nature of these materials additionally allows for experimental validation by direct comparison with multislice simulations [12] of model structures (Fig. 1d-e). This work demonstrates how low-voltage 4D-STEM will provide new insights into the atomic-scale structure and degradation mechanisms of active sites in PGM-free catalysts, facilitating the development of low-cost hydrogen fuel cells and other energy conversion technologies in the future [13].

Zachman, Michael↗

Theoretical Kinetics Predictions for Reactions on the NH 2 O Potential Energy Surface

Recent modeling studies of ammonia oxidation, which are motivated by the prospective role of ammonia as a zero-carbon fuel, have indicated significant discrepancies among the existing literature mechanisms. In this study, high-level theoretical kinetics predictions have been obtained for reactions on the NH 2 O potential energy surface, including the NH 2 + O, HNO + H, and NH + OH reactions. These reactions have previously been highlighted as important reactions in NH 3 oxidation with high sensitivity and high uncertainty. The potential energy surface is explored with coupled cluster calculations, including large basis sets and high-level corrections to yield high-accuracy (~0.2 kcal/mol 2σ uncertainty) estimates of the stationary point energies. Variational transition state theory is used to predict the microcanonical rate constants, which are then incorporated in master equation treatments of the temperature- and pressure-dependent kinetics. For radical–radical channels, the microcanonical rates are obtained from variable reaction coordinate transition state theory implementing directly evaluated multireference electronic energies. The analysis yields predictions for the total rate constants as well as the branching ratios. We find that the NO + H 2 channel contributes 10% of the total NH 2 + O flux at combustion temperatures, although this channel is not included in modern NH 3 oxidation mechanisms. Modeling is used to illustrate the ramifications of these rate predictions on the kinetics of NH 3 oxidation and NO x formation. Finally, the present results for NH 2 + O are important for predicting the chain branching and formation of NO in the oxidation of NH 3 and thermal DeNO x .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photodissociation of NO{sub 2} in the (2) {sup 2}B{sub 2} state: The O({sup 1}D{sub 2}) dissociation channel

Direct current slice and crush velocity map imaging has been used to probe the photodissociation dynamics of nitrogen dioxide above the second dissociation limit. The paper is a companion to a previous publication [J. Chem. Phys. 128, 164318 (2008)] in which we reported results for the O({sup 3}P{sub J})+NO({sup 2}{Pi}{sub {Omega}}) adiabatic product channel. Here we examine the O({sup 1}D{sub 2})+NO({sup 2}{Pi}{sub {Omega}}) diabatic product channel at similar excitation energies. Using one- and two-color imaging experiments to observe the velocity distributions of state selected NO fragments and O atoms, respectively, we are able to build a detailed picture of the dissociation dynamics. We show that by combining the information obtained from velocity map imaging studies with mass-resolved resonantly enhanced multiphoton ionization spectroscopy it is possible to interpret and fully assign the NO images. By recording two-color images of the O({sup 1}D{sub 2}) photofragments with different polarization combinations of the pump and probe laser fields we also measure the orbital angular momentum alignment in the atomic fragment. We find that the entire O({sup 1}D{sub 2}) photofragment distribution is similarly aligned with most of the population in the M{sub J}={+-}1 magnetic sublevels. The similarity of the fragment polarizations is interpreted as a signature of all of the O({sup 1}D{sub 2}) atoms being formed via the same avoided crossing. At the photolysis energy of 5.479 52 eV we find that the NO fragments are preferentially formed in v=1 and that the vibrationally excited fragments exhibit a bimodal rotational distribution. This is in contrast to the unimodal rotational profile of the NO fragments in v=0. We discuss these observations in terms of the calculated topology of the adiabatic potential energy surfaces and attribute the vibrational inversion and rotational bimodality of the v=1 fragments to the symmetric stretch and bending motion generated on excitation to the (2) {sup 2}B{sub 2} state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Unraveling the Intermediate Reaction Complexes and Critical Role of Support-Derived Oxygen Atoms in CO Oxidation on Single-Atom Pt/CeO 2

CeO 2 -supported Pt single-atom catalysts have been extensively studied due to their relevance in automobile emission control and for the fundamental understanding of CeO 2 -based catalysts. Though CeO 2 -supported Pt nanoparticles are often more active than their single-atom counterparts, the former could easily redisperse to Pt single atom under oxidizing diesel conditions. Therefore, to maximize the reactivity of every Pt atom, it is important to fully understand the reaction mechanism of CeO 2 -supported Pt single atoms. Here, we report a CO oxidation study on a Pt/CeO 2 single-atom catalyst, where we can account for all of the neighbors using in situ and operando spectroscopy techniques and microcalorimetric measurements. Coupled with density functional theory calculations, we present a comprehensive picture of the dynamics of the surface species, the role of surface intermediates, and explain the observed reaction kinetics. We started with a catalyst containing exclusively single atoms and used in situ/operando spectroscopy to provide evidence for their stability during the reaction and to identify the Pt 1 complexes before and during the reaction and their binding to CO. The results reveal that in the precatalyst, Pt is present as Pt(O) 4 on the CeO 2 (111) step edge sites, but during CO oxidation, we find that two Pt 1 complexes coexist, representing two states of the same active site in the reaction cycle. The dominant state/complex remains Pt(O) 4 , which adsorbs CO very weakly as shown by CO microcalorimetry. The second, minority state/complex, Pt(CO)(O) 3 is generated through the reaction of Pt(O) 4 with CO, and CO is bound strongly to Pt 1 . Labile oxygen adatoms from the CeO 2 surface play a major role in the regeneration of Pt(O) 4 either directly from Pt(O) 3 or by reaction with the strongly adsorbed CO in Pt(CO)(O) 3 . We show that the formation of an oxygen vacancy and generation of a labile O* are not barrierless, which explains the long lifetime of Pt(CO)(O) 3 and its detectability despite being a minority complex. The results help to develop a comprehensive view of the dynamic evolution of Pt 1 complexes along the reaction cycle and provide mechanistic insights to guide the design of Pt-based single-atom catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gas generation during waste treatment of acidic solutions from the dissolution of irradiated LEU targets for 99 Mo production

The goal of the Reduced Enrichment for Research and Test Reactors Program is to limit the use of high-enriched uranium (HEU) in research and test reactors by substituting low-enriched uranium (LEU) wherever possible. The work reported here documents our work to develop the calcining technologies and processes that will be needed for 99 Mo production using LEU foil targets and the Modified Cintichem Process. The primary concern with the conversion to LEU from HEU targets is that it would result in a five- to six-fold increase in the total uranium. This increase results in more liquid waste from the process. We have been working to minimize the increase in liquid waste and to minimize the impact of any change in liquid waste. Direct calcination of uranium-rich nitric acid solutions generates NO 2 gas and UO 3 solid. We have proposed two processes for treating the liquid waste from a Modified Cintichem Process with a LEU foil. One is an optimized direct calcination process that is similar to the process currently in use. The other is a uranyl oxalate precipitation process. The specific goal of the work reported here was to characterize and compare the chemical reactions that occur during these two processes. In particular, the amounts and compositions of the gaseous and solid products were of interest. A series of experiments was carried out to show the effects of temperature and the redox potential of the reaction atmosphere. The primary products of the direct calcination process were mixtures of U 3 O 8 and UO 3 solids and NO 2 gas. The primary products of the oxalate precipitation process were mixtures of U 3 O 8 and UO 2 solid and CO 2 gas. Higher temperature and a reducing atmosphere tended to favor quadrivalent over hexavalent uranium in the solid product. These data will help producers to decide between the two processes. In addition, the data can be used to design appropriate off-gas systems for pilot and production facilities.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Corrosion-Resistant Non-Carbon Electrocatalyst Supports for PEFCS

Insufficient durability of commercial catalysts is a persistent issue for PEFC applications.1 Herein, Pt on Nb-doped-TiO 2 is reported as a highly durable electrocatalyst on which the direct 4-electron reduction of oxygen to water is more facile compared to Pt/C. All performance metrics are reported comparing Pt/Nb-TiO2 with a 15% Pt loading, against a commercial Pt/C catalyst (46.5% Pt loading, Tanaka, K. K.). Nb-doped-TiO 2 with high surface area and high electronic conductivity was synthesized using the supercritical fluid method. Initially, the durability of the catalyst was characterized using accelerated stability tests (ASTs) involving 10,000 high potential cycles (DOE/FCCJ protocol) and the Pt/Nb-TiO 2 was found to retain 78% of its initial electrochemically active surface area (ECSA) compared to the 57.6 % retained by Pt/C. These observations were in excellent agreement with previous reports that the Pt particle size of Pt/C grew from 2nm to 8nm during the AST protocol along with severe corrosion and amorphization of the carbon surface.2, 3 TEM and XPS studies of the Pt-Nb-doped-TiO 2 catalyst showed that the Pt particle size grew from 3nm to 6nm and the Nb(IV) and Ti(III) in the support were oxidized to Nb(V) and Ti(IV) after the durability test. Thus, the improvement in Pt/Nb-TiO 2 ECSA retention was attributed to the lower extent of particle growth and lack of oxidative support loss upon oxidation as compared to Pt/C. The oxygen reduction reaction (ORR) performance was characterized by linear polarization using a rotating disk electrode (RDE). The electrochemical surface areas of Pt/Nb-TiO 2 and Pt/C were found to be 48m2·g -1 and 83m2·g -1 respectively, and the mass activity for the ORR at 0.9V vs. RHE were found to be 150 mA·mg-1Pt and 124 mA·mg-1Pt respectively. The improved mass activity on Pt/Nb-TiO 2 was attributed to strong metal support interaction (SMSI) between the Nb-TiO 2 support and the Pt catalyst based on the 625 meV decrease in the binding energy of the Pt4f x-ray photo-electron spectroscopy (XPS) peaks of Pt/Nb-TiO 2 compared to Pt/C. To quantify the impact of the SMSI, a kinetic model was applied to calculate the elementary reaction rate constants for the various steps of the ORR on both catalysts. The reaction rate constant (k1) for the direct 4-electron transfer pathway to produce H 2 O was significantly larger in Pt/Nb-TiO 2 as compared to Pt/C. Thus, the reduction in the electron binding energy as observed in the XPS was found to aid the facile filling of the higher energy 2p orbitals of O 2 thereby leading to improved 4-electron transfer kinetics and improved overall activity.

08 HYDROGEN↗

Accelerated molecular dynamics methods: introduction and recent developments

A long-standing limitation in the use of molecular dynamics (MD) simulation is that it can only be applied directly to processes that take place on very short timescales: nanoseconds if empirical potentials are employed, or picoseconds if we rely on electronic structure methods. Many processes of interest in chemistry, biochemistry, and materials science require study over microseconds and beyond, due either to the natural timescale for the evolution or to the duration of the experiment of interest. Ignoring the case of liquids xxx, the dynamics on these time scales is typically characterized by infrequent-event transitions, from state to state, usually involving an energy barrier. There is a long and venerable tradition in chemistry of using transition state theory (TST) [10, 19, 23] to directly compute rate constants for these kinds of activated processes. If needed dynamical corrections to the TST rate, and even quantum corrections, can be computed to achieve an accuracy suitable for the problem at hand. These rate constants then allow them to understand the system behavior on longer time scales than we can directly reach with MD. For complex systems with many reaction paths, the TST rates can be fed into a stochastic simulation procedure such as kinetic Monte Carlo xxx, and a direct simulation of the advance of the system through its possible states can be obtained in a probabilistically exact way. A problem that has become more evident in recent years, however, is that for many systems of interest there is a complexity that makes it difficult, if not impossible, to determine all the relevant reaction paths to which TST should be applied. This is a serious issue, as omitted transition pathways can have uncontrollable consequences on the simulated long-time kinetics. Over the last decade or so, we have been developing a new class of methods for treating the long-time dynamics in these complex, infrequent-event systems. Rather than trying to guess in advance what reaction pathways may be important, we return instead to a molecular dynamics treatment, in which the trajectory itself finds an appropriate way to escape from each state of the system. Since a direct integration of the trajectory would be limited to nanoseconds, while we are seeking to follow the system for much longer times, we modify the dynamics in some way to cause the first escape to happen much more quickly, thereby accelerating the dynamics. The key is to design the modified dynamics in a way that does as little damage as possible to the probability for escaping along a given pathway - i.e., we try to preserve the relative rate constants for the different possible escape paths out of the state. We can then use this modified dynamics to follow the system from state to state, reaching much longer times than we could reach with direct MD. The dynamics within any one state may no longer be meaningful, but the state-to-state dynamics, in the best case, as we discuss in the paper, can be exact. We have developed three methods in this accelerated molecular dynamics (AMD) class, in each case appealing to TST, either implicitly or explicitly, to design the modified dynamics. Each of these methods has its own advantages, and we and others have applied these methods to a wide range of problems. The purpose of this article is to give the reader a brief introduction to how these methods work, and discuss some of the recent developments that have been made to improve their power and applicability. Note that this brief review does not claim to be exhaustive: various other methods aiming at similar goals have been proposed in the literature. For the sake of brevity, our focus will exclusively be on the methods developed by the group.

74 ATOMIC AND MOLECULAR PHYSICS↗

The fluorine destruction in stars: First experimental study of the {sup 19}F(p,{alpha}){sup 16}O reaction at astrophysical energies

The {sup 19}F(p,{alpha}){sup 16}O reaction is an important fluorine destruction channel in the proton-rich outer layers of asymptotic giant branch (AGB) stars and it might also play a role in hydrogendeficient post-AGB star nucleosynthesis. So far, available direct measurements do not reach the energy region of astrophysical interest (E{sub cm}{approx} 300 keV), because of the hindrance effect of the Coulomb barrier. The Trojan Horse (TH) method was thus used to access this energy region, by extracting the quasi-free contribution to the {sup 2}H({sup 19}F,{alpha}{sup 16}O)n reaction. The TH measurement of the {alpha}{sub 0} channel, which is the dominant one at such energies, shows the presence of resonant structures not observed before that cause an increase of the reaction rate at astrophysical temperatures up to a factor of 1.7, with potential important consequences for stellar nucleosynthesis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Design and modification of zeolite capsule catalyst, a confined reaction field, and its application in one-step isoparaffin synthesis from syngas

Four kinds of zeolite capsule catalyst with different crystallization conditions were prepared and utilized for the middle isoparaffin direct synthesis via Fischer-Tropsch synthesis (FTS) reaction. Characterization results exhibited that these capsule catalysts had a compact, integral H-ZSM-5 shell. In FTS reactions on these zeolite capsule catalysts, hydrocarbons of C11+ were totally suppressed, accompanied by a sharp anti-Anderson-Schultz-Flory (ASF) law product distribution. The selectivity of light isoparaffin was improved obviously, but with the increase of the olefin's selectivity. Two-stage isoparaffin synthesis reaction, using the combination of zeolite capsule catalyst with hydrogenation catalyst of Pd/SiO{sub 2} in a single reactor as dual-bed catalyst, was also conducted for converting the residual olefins produced by the single zeolite capsule catalyst. Dependent on the palladium role of hydrogenation and hydrogen spillover, almost all the olefins effused from the first stage of zeolite capsule catalyst were hydrogenated, mostly converted to isoparaffin. The selectivity of isoparaffin in the final products was increased markedly as expected. 10 refs., 7 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Tailoring Polymer Colloids Derived Porous Carbon Spheres Based on Specific Chemical Reactions

Porous carbon spheres derived from polymer colloids with regular geometry, monodispersed morphology, well-controlled contents and structures play important roles in many areas of application, such as energy storage/conversion, gas adsorption/separation, catalysis, and chemo-photothermal therapy. Suitable polymerization reaction and synthetic strategy are both critical for the obtainment of stable polymer colloids as carbon precursors. Basic polymerization reactions are the cornerstones of synthetic strategies, which directly provides the direct molecular-based design of functionalized polymer/ carbon spheres. Thus, this progress report mainly focuses on the summary of suitable polymerization reactions for colloidal polymer derived porous carbon spheres. Recent advances in the synthetic strategies and applications are also discussed, including their corresponding polymerization reactions. Finally, the perspectives for the development of polymer derived porous carbon spheres are provided based on the controlled synthesis of polymer colloids and optimization over the carbonization process to achieve highly functionalized carbon spheres for practical applications.

36 MATERIALS SCIENCE↗

Scalable synthesis of Fe₃O₄ nanoparticles anchored on graphene as a high-performance anode for lithium ion batteries

We report a scalable strategy to synthesize Fe₃O₄/graphene nanocomposites as a high-performance anode material for lithium ion batteries. In this study, ferric citrate is used as precursor to prepare Fe₃O₄ nanoparticles without introducing additional reducing agent; furthermore and show that such Fe₃O₄ nanoparticles can be anchored on graphene sheets which attributed to multifunctional group effect of citrate. Electrochemical characterization of the Fe₃O₄/graphene nanocomposites exhibit large reversible capacity (~1347 mA h g⁻¹ at a current density of 0.2 C up to 100 cycles, and subsequent capacity of ~619 mA h g⁻¹ at a current density of 2 C up to 200 cycles), as well as high coulombic efficiency (~97%), excellent rate capability, and good cyclic stability. High resolution transmission electron microscopy confirms that Fe₃O₄ nanoparticles, with a size of ~4–16 nm are densely anchored on thin graphene sheets, resulting in large synergetic effects between Fe₃O₄ nanoparticles and graphene sheets with high electrochemical performance. - Graphical abstract: The reduction of Fe³⁺ to Fe²⁺ and the deposition of Fe₃O₄ on graphene sheets occur simultaneously using citrate function as reductant and anchor agent in this reaction process. Highlights: • Fe₃O₄/graphene composites are synthesized directly from graphene and C₆H₅FeO₇. • The citrate function as reductant and anchor agent in this reaction process. • The resulting Fe₃O₄ particles (~4–16 nm) are densely anchored on graphene sheets. • The prepared Fe₃O₄/graphene composites exhibit excellent electrochemical performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantitative soil zymography: Mechanisms, processes of substrate and enzyme diffusion in porous media

Soil membrane zymography enables 2D mapping of enzyme activities on the surface of soil samples. The method is according to diffusion of components of enzymatically-mediated reactions to/from membrane, and, hence, reflects the distribution of enzyme activities at the intact soil surface. Zymography has been already successfully implemented in numerous soil ecology applications. Here we identify two methodological aspects for further improvement and expansion of the method at micro and macro scales: first, accounting for the area of contact between the soil surface and the zymography membranes and, second, accounting for diffusion effects during the zymography procedure. We tested three methods, namely, laser-scanning, staining with a fluorescent product (e.g. MUF: 4-methylumbelliferone), and X-ray computed micro-tomography, for assessing the area of the soil surface in contact with the membranes. We quantified diffusion of MUF, enzymes and substrate between the substrate-saturated membrane and soil as well as diffusion processes during membrane zymography via HP2 software. Diffusion of the substrate from the membrane and of the MUF-product to the membrane was detected, while there were no clear evidence of enzyme diffusion to/in the membrane. According to the model simulations, the enzyme activities detected via 2D zymography probably represent only a small portion, about 20%, of the actual reactions within the soil volume that is in both direct contact and in hydrological contact with zymography membranes. This is a result of omnidirectional diffusion of reaction products. The membrane contact with the soil surface estimated by three methods ranged from 3.4 to 36.5% further signifying that only a fraction of enzymes activity is detectable in a course of 2D soil zymography.

59 BASIC BIOLOGICAL SCIENCES↗

Spin-Polarized Oxygen Evolution Reaction Enabled by Chiral Molecules Coupled with Ferromagnetic Electrocatalysts

The discovery of chirality-induced spin selectivity (CISS) revolutionized our understanding of the capabilities of chiral molecules, revealing that chiral molecules can function as spin filters, aligning the spin orientation of electrons when they transmit through them. Recently, CISS has been exploited to direct energy conversion, especially the oxygen evolution reaction (OER). However, despite the remarkable progress that has been achieved, the effect of CISS in influencing the intermediate species formation and changing the rate-determining step (RDS) is still vague. To understand those key reaction mechanism steps, electrocatalysts with distinct magnetic characteristics, ferromagnetic CoFe2O4 and paramagnetic Co3O4, were synthesized. The results show that spin-polarized charge carriers retain their spin alignment when coupled with ferromagnetic CoFe2O4, akin to the behavior observed under a magnetic field. The Tafel analysis and kinetic isotope studies (kinetic isotope effect) suggest that in the absence of chiral molecules, the initial electron transfer step, the formation of O* species, governs the rate-determining step (RDS). However, introducing chiral molecules shifts the RDS to a combination of the first and second electron transfers, leading to the formation of OOH*. This conclusion was further supported by in situ infrared spectroscopy, which shows that l-methionine-modified CoFe2O4 (l-CoFe2O4) promotes the formation of OOH*, a key intermediate for O2 generation. This study highlights the critical role of CISS in affecting the OER mechanism and intermediate species formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron Induced Hypernuclear Spectroscopy. Results in Hall A at Jefferson Lab

The characteristics of the Jefferson LAB electron beam, together with those of the experimental equipments, offer a unique opportunity to study hypernuclear spectroscopy via electromagnetic induced reactions. Results are presented on {sup 12}C, {sup 16}O and {sup 9}Be targets.In the hypernuclear missing-mass spectrum the experiment achieves sub-MeV energy resolution by exploiting the characteristics of the High Resolution Spectrometer pair and the beam quality available at JLab.These studies have provided, among other things, the first quantitative information on core-excited states in hypernuclei, as well as the precise determination of Lambda binding energy in the {sub {lambda}}{sup 16}N hypernucleus.For the experiment on oxygen, a waterfall target has been employed, allowing simultaneous measurement of the elementary reaction on protons: a crucial measurement to disentangle the contribution of the elementary reaction from the measured hypernuclear production cross section, yielding direct access to the nucleus-hypernucleus transition structure.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Phosphate binding protein as the biorecognition element in a biosensor for phosphate

This work explores the potential use of a member of the periplasmic family of binding proteins, the phosphate binding protein (PBP), as the biorecognition element in a sensing scheme for the detection of inorganic phosphate (Pi). The selectivity of this protein originates from its natural role which, in Escherichia coli, is to serve as the initial receptor for the highly specific translocation of Pi to the cytoplasm. The single polypeptide chain of PBP is folded into two similar domains connected by three short peptide linkages that serve as a hinge. The Pi binding site is located deep within the cleft between the two domains. In the presence of the ligand, the two globular domains engulf the former in a hinge-like manner. The resultant conformational change constitutes the basis of the sensor development. A mutant of PBP (MPBP), where an alanine was replaced by a cysteine residue, was prepared by site-directed mutagenesis using the polymerase chain reaction (PCR). The mutant was expressed, from plasmid pSD501, in the periplasmic space of E. coli and purified in a single chromatographic step on a perfusion anion-exchange column. Site-specific labeling was achieved by attaching the fluorophore, N-[2-(1-maleimidyl)ethyl]-7-(diethylamino)coumarin-3-carboxamide (MDCC), to the protein through the sulfhydryl group of the cysteine moiety. Steady-state fluorescence studies of the MPBP-MDCC conjugate showed a change in the intensity of the signal upon addition of Pi. Calibration curves for Pi were constructed by relating the intensity of the fluorescence signal with the amount of analyte present in the sample. The sensing system was first developed and optimized on a spectrofluorometer using ml volumes of sample. It was then adapted to be used on a microtiter plate arrangement with microliter sample volumes. The system's versatility was finally proven by developing a fiber optic fluorescence-based sensor for monitoring Pi. In all three cases the detection limits for the analyte were in the sub-microMolar range. It was also demonstrated that the sensing system was selective for phosphate over other structurally-similar anions, paving the way for the design and development of a new family of biosensors utilizing the specific binding properties of periplasmic proteins. c2003 Elsevier B.V. All rights reserved.

NASA Program Fundamental Space Biology↗

Effects of Turbulence and Temperature Fluctuations on Knock Development in an Ethanol/Air Mixture

The effects of turbulence on knock development and intensity for a thermally inhomogeneous stoichiometric ethanol/air mixture at a representative end-gas autoignition condition in internal combustion engines are investigated using direct numerical simulations with a skeletal reaction mechanism. Two- and three-dimensional simulations are performed by varying the most energetic length scale of temperature, \(l_T\) , and its relative ratio with the most energetic length scale of turbulence, \(l_T/l_e\) , together with two different levels of the turbulent velocity fluctuation, \(u'\) . It is found that \(l_T\) / \(l_e\) and the ratio of ignition delay time to eddy-turnover time, \(\tau _{ig}/\tau _t\) , are the key parameters that control the detonation development. An increase in either \(l_T\) or \(l_e\) enhances the detonation propensity by allowing a longer run-up distance for the detonation development. The characteristic length scale of the temperature field, \(l_T\) , is significantly modified by high turbulence intensity achieved by a large \(l_e\) and \(u'\) . The intense turbulence mixing effectively distributes the initial temperature field to broader scales to support the developing detonation waves, thereby increasing the likelihood of the detonation formation. On the contrary, high turbulence intensity with a short mixing time scale, achieved by a small \(l_e\) and a large \(u'\) , reduces the super-knock intensity attributed to the finer broken-up structures of detonation waves. Either \(\tau _{ig}/\tau _t\) less than unity or \(l_e = l_T\) even with a large \(u'\) is found to have no significant effect on super-knock mitigation. Finally, high turbulent intensity may induce high-pressure spikes comparable to the von Neumann spike. Overall, increased temperature and pressure by combustion heating, noticeably after the peak of heat release rate, significantly enhance the collision and interaction of multiple emerging autoignition fronts near the ending combustion process, resulting in localized high-pressure spikes.

42 ENGINEERING↗

Balancing the Hydrogen Evolution Reaction, Surface Energetics, and Stability of Metallic MoS 2 Nanosheets via Covalent Functionalization

We modify the fundamental electronic properties of metallic (1T phase) nanosheets of molybdenum disulfide (MoS 2 ) through covalent chemical functionalization, and thereby directly influence the kinetics of the hydrogen evolution reaction (HER), surface energetics, and stability. Chemically exfoliated, metallic MoS 2 nanosheets are functionalized with organic phenyl rings containing electron donating or withdrawing groups. We find that MoS 2 functionalized with the most electron donating functional group (p-(CH 3 CH 2 ) 2 NPh-MoS 2 ) is the most efficient catalyst for HER in this series, with initial activity that is slightly worse compared to the pristine metallic phase of MoS 2 . The p-(CH 3 CH 2 ) 2 NPh-MoS 2 is more stable than unfunctionalized metallic MoS 2 and outperforms unfunctionalized metallic MoS 2 for continuous H 2 evolution within 10 min under the same conditions. With regards to the entire studied series, the overpotential and Tafel slope for catalytic HER are both directly correlated with the electron donating strength of the functional group. The results are consistent with a mechanism involving ground-state electron donation or withdrawal to/from the MoS 2 nanosheets, which modifies the electron transfer kinetics and catalytic activity of the MoS 2 nanosheet. The functional groups preserve the metallic nature of the MoS 2 nanosheets, inhibiting conversion to the thermodynamically stable semiconducting state (2H) when mildly annealed in a nitrogen atmosphere. We propose that the electron density and, therefore, reactivity of the MoS 2 nanosheets are controlled by the attached functional groups. Functionalizing nanosheets of MoS 2 and other transition metal dichalcogenides provides a synthetic chemical route for controlling the electronic properties and stability within the traditionally thermally unstable metallic state.

08 HYDROGEN↗

Theoretical Study of the Reaction Mechanism and Kinetics of the Phenyl + Allyl and Related Benzyl + Vinyl Associations

Potential energy surfaces for the allyl + phenyl and benzyl + vinyl barrierless radical association reactions have been studied at the CCSD(T)-F12/cc-pVTZ-f12//B3LYP/6-311G** level of theory. Variable reaction coordinate transition state theory (VRC-TST) has been employed to evaluate high-pressure limit rate constants for the barrierless channels. Then, Rice–Ramsperger–Kassel–Marcus master equation (RRKM-ME) calculations have been performed to assess phenomenological rate constants and product branching ratios of various reaction channels at different temperatures and pressures. The initial step of both radical association reactions produces 3-phenylpropene which can further dissociate into a variety of bimolecular products including the indene precursor 1-phenylallyl + H. The results showed that at typical combustion conditions the collisional stabilization of 3-phenylpropene dominates both the phenyl + allyl and benzyl + vinyl reactions at temperatures below 1000 K and remains important at high pressures up to 2500 K. The main bimolecular products of the two reactions at high temperatures are predicted to be benzyl + vinyl and phenyl + allyl, respectively. The well-skipping mechanism to form 1-phenylallyl directly in the allyl + phenyl and benzyl + vinyl reactions appeared to be not significant, however, the reactions can provide some contributions into the formation of the indene precursor via the 3-phenylpropene stabilization/dissociation sequence and most of all, via the formation of 3-phenylpropene itself, which then can undergo H-abstraction by available radicals to produce 1-phenylallyl. The allyl + phenyl reaction can also contribute to the formation of two-ring PAH by producing benzyl radical at high temperatures, either by the well-skipping or stabilization/dissociation mechanisms; in turn, benzyl can readily react with acetylene or propargyl radical to form indene or naphthalene precursors, respectively. Finally, rate expressions for all important reaction channels in a broad range of temperatures and pressures have been generated for kinetic modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗