Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Control Theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

A statistical rain attenuation prediction model with application to the advanced communication technology satellite project. 3: A stochastic rain fade control algorithm for satellite link power via non linear Markow filtering theory

The dynamic and composite nature of propagation impairments that are incurred on Earth-space communications links at frequencies in and above 30/20 GHz Ka band, i.e., rain attenuation, cloud and/or clear air scintillation, etc., combined with the need to counter such degradations after the small link margins have been exceeded, necessitate the use of dynamic statistical identification and prediction processing of the fading signal in order to optimally estimate and predict the levels of each of the deleterious attenuation components. Such requirements are being met in NASA's Advanced Communications Technology Satellite (ACTS) Project by the implementation of optimal processing schemes derived through the use of the Rain Attenuation Prediction Model and nonlinear Markov filtering theory.

Manning, Robert M.↗

Control of Structure in Conventional Friction Stir Welds through a Kinematic Theory of Metal Flow

In friction stir welding (FSW), a rotating pin is translated along a weld seam so as to stir the sides of the seam together. Metal is prevented from flowing up the pin, which would result in plowing/cutting instead of welding, by a shoulder on the pin. In conventional FSW, the weld metal rests on an "anvil", which supports the heavy "plunge" load on the tool. In this study, both embedded tungsten wires along and copper plating on the faying surfaces were used to trace the flow of AA2219 weld metal around the C-FSW tool. The effect of tool rotational speed, travel speed, plunge load, and pin thread pitch on the resulting weld metal flow was evaluated. Plan, longitudinal, and transverse section x-ray radiographs were examined to trace the metal flow paths. The results are interpreted in terms of a kinematic theory of metal flow in FSW.

Rubisoff, H.A.↗

Perspectives in aeroelasticity

Achievements of the past decade, the state of the art, and trends in aeroelasticity are discussed. Topics selected for this end include: (1) brief orientation into the history of the subject, (2) roles of active controls and the concept of aerodynamic energy in load alleviation and in flutter suppression, (3) computerized aeroelastic analysis, (4) aeroelastic effects in stability, (5) aeroelastic optimization, (6) the use of composites, (7) recent applications of lifting surface theory to interfering surfaces and control surfaces, (8) transonic flow considerations, and (9) some problems related to the space shuttle.

Garrick, I. E.↗

The orbital motion of Comet Halley

Since comet Halley is to be studied with spacecraft, new requirements arise for the accuracy to which the position of the methodology of constructing an exact theory is presented. The effect of all kinds of errors in building a mathematical model of motion and the effect of a shift of Halley's center-of-mass relative to the optical center are analyzed. The theory is based on the optical, angular observations of 1911 back to 1759 reduced to the mean equator and epoch of 1950.0 as well as the relative observations of 1682. The observations of 1982 were used to control the accuracy of the theory developed. Deviations of calculated values from measured values do not exceed 1.5 which confirms the good degree of accuracy of this theory. The comet's orbit is obtained using current optical data.

Savchenko, V. V.↗

Trends in modern system theory

The topics considered are related to linear control system design, adaptive control, failure detection, control under failure, system reliability, and large-scale systems and decentralized control. It is pointed out that the design of a linear feedback control system which regulates a process about a desirable set point or steady-state condition in the presence of disturbances is a very important problem. The linearized dynamics of the process are used for design purposes. The typical linear-quadratic design involving the solution of the optimal control problem of a linear time-invariant system with respect to a quadratic performance criterion is considered along with gain reduction theorems and the multivariable phase margin theorem. The stumbling block in many adaptive design methodologies is associated with the amount of real time computation which is necessary. Attention is also given to the desperate need to develop good theories for large-scale systems, the beginning of a microprocessor revolution, the translation of the Wiener-Hopf theory into the time domain, and advances made in dynamic team theory, dynamic stochastic games, and finite memory stochastic control.

Athans, M.↗

The complete Brans–Dicke theories

Given that the simple wave equation of Brans–Dicke theory for the scalar field is preserved, we have investigated, through exhaustively analyzing the Bianchi identities, the consistent theories which violate the exact energy conservation equation. It is found that only three theories exist which are unambiguously determined from consistency, without imposing arbitrary functions by hand. Each of these theories possesses a specific interaction term which controls the energy exchange between the scalar field and ordinary matter. The theories contain new parameters (integration constants from the integration procedure) and when these are switched-off, Brans–Dicke theory emerges. As usually, the vacuum theories can be defined from the complete Brans–Dicke theories when the matter energy–momentum tensor vanishes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Notes on the N.A.C.A. control force recorder

Emphasized here is the desirability of using recording instruments in the investigation of the characteristics of airplanes with particular reference to the National Advisory Committee for Aeronautics (NACA) control force recorder. Given here are photographs, records, and a description of the instrument developed by NACA for investigations on different types of aircraft. Described here is an instrument for recording control forces. At present, this control force recorder registers only the forces exerted on the stick. However, attachments are being designed to enable the forces on the rudder bar also to be recorded. The instrument in its final form will consist of three parts, namely, the recorder, the controller for the stick, and the controller for the rudder. The first two are in use now. The theory of operation is simple. In the controller, which is slipped over and fastened to the stick, are small electrical resistances which vary with the force applied to the handle. The recording apparatus then consists of suitable variable resistances properly connected to galvanometers whose deflections are proportional to the forces applied to the stick.

Reeid, H J E↗

Design of non-interacting multivariable discrete time systems

The theory of decoupling a multivariable system with the help of state variable feedback is applied to discrete time systems. The system differential equations in the continuous time domain are converted to a discrete time representation. A discrete time controller is designed to control the overall input to the system such that a specified desired decoupled output response is obtained. The decoupled system behaves as a set of single-input, single-output systems and state variable techniques can be easily applied to control each output individually. Control is achieved by periodically sampling the inputs and all the states and feeding them back through a controller. For linear time invariant systems the control is time invariant. The basic theory of decoupling involves feeding back all the states twice, first to decouple the system and then to achieve a desired response. The states of the system are computed with the help of a state estimator which calculates all the present states of the system so that on-line control can be applied to real time systems. The theory is applied to a model of a nuclear rocket engine.

Agrawal, B. L.↗

A new approach to adaptive control of manipulators

An approach in which the manipulator inverse is used as a feedforward controller is employed in the adaptive control of manipulators in order to achieve trajectory tracking by the joint angles. The desired trajectory is applied as an input to the feedforward controller, and the controller output is used as the driving torque for the manipulator. An adaptive algorithm obtained from MRAC theory is used to update the controller gains to cope with variations in the manipulator inverse due to changes of the operating point. An adaptive feedback controller and an auxiliary signal enhance closed-loop stability and achieve faster adaptation. Simulation results demonstrate the effectiveness of the proposed control scheme for different reference trajectories, and despite large variations in the payload.

Seraji, H.↗

Linearization Techniques for Controlled Piecewise Deterministic Markov Processes; Application to Zubov's Method

We aim at characterizing domains of attraction for controlled piecewise deterministic processes using an occupational measure formulation and Zubov's approach. Firstly, we provide linear programming (primal and dual) formulations of discounted, infinite horizon control problems for PDMPs. These formulations involve an infinite-dimensional set of probability measures and are obtained using viscosity solutions theory. Secondly, these tools allow to construct stabilizing measures and to avoid the assumption of stability under concatenation for controls. The domain of controllability is then characterized as some level set of a convenient solution of the associated Hamilton-Jacobi integral-differential equation. The theoretical results are applied to PDMPs associated to stochastic gene networks. Explicit computations are given for Cook's model for gene expression.

97 MATHEMATICS AND COMPUTING↗

Description and theory of operation of the computer by-pass system for the NASA F-8 digital fly-by-wire control system

A triplex digital flight control system was installed in a NASA F-8C airplane to provide fail operate, full authority control. The triplex digital computers and interface circuitry process the pilot commands and aircraft motion feedback parameters according to the selected control laws, and they output the surface commands as an analog signal to the servoelectronics for position control of the aircraft's power actuators. The system and theory of operation of the computer by pass and servoelectronics are described and an automated ground test for each axis is included.

Source record↗

Design of a multivariable integrated control for a supersonic propulsion system

An inlet/engine/nozzle integrated control mode for the propulsion system of an advanced supersonic commercial aircraft was studied. Results show that integration of these control functions can result in both operational and performance benefits for the propulsion system. For example, this integrated control mode may make it possible to minimize the use of inlet bypass doors for shock position control. This may be of benefit to the aircraft as a result of minimizing: (1) bypass bleed drag effects; (2) perturbations to the aircraft resulting from the side thrust effect of the bypass bleeds; and (3) potential unstarts of the inlet. A conceptual integrated control mode was developed which makes use of many cross coupling paths between inlet and engine control variables and inlet and engine sensed variables. A multivariable control design technique based upon linear quadratic regulator theory was applied to designing the feedback gains for this control to allow a simulation evaluation of the benefits of the integrated control mode.

Beattie, E. C.↗

Closed-form solutions for feedback control with terminal constraints

The problem of closed-loop control of maneuvers between two states for linear dynamical systems, subject to an arbitrarily specified terminal state, is considered. The feedback controller design is based on finite-time quadratic regulator theory. Closed-form expressions for the optimal control law are developed. Solutions are presented for both conventional and smoothed control profiles with fixed and/or free end condition problems. In the maneuvers using control-rate penalties, smooth profiles are generated throughout the maneuvers, in the sense that the initial condition jump discontinuities have been eliminated. Several examples involving large-angle maneuvers of a spacecraft are demonstrated. Results include control maneuvers from one state to another such as rest to rest and spin to rest, which effectively justify the solutions developed in this paper.

Juang, J.-N.↗

Optimal Input Design for Aircraft Stability and Control Flight Testing

Flight testing to characterize aircraft stability and control is a complex and expensive task that involves restrictive practical constraints. Methods are examined for optimizing the inputs applied to aircraft controls during flight test maneuvers to produce informative flight data. Theory underpinning optimal input design for stability and control flight testing is explained. The merits and limitations of optimal inputs are discussed, along with optimization approaches and practical considerations involved in applying optimal inputs in a real flight test environment. Simulated and flight test case studies of optimal multiple-input design for aircraft stability and control flight testing are presented and discussed.

optimal input design↗

Continuum Microkinetic Rate Theory of Lattice Systems: Formalization, Current Limitations, and a Possible Basis for Continuum Rate Theory

A broad class of reaction networks are controlled not by any thermodynamic ensemble but by rates and are referred to as “kinetically constrained”. Here in this paper, microkinetic rate theory is extended into a model of arbitrarily complex reaction networks. This microkinetic rate theory takes a form where the constraints imposed by kinetically constrained systems apply naturally. This model is compared to numerically complete results and is shown to be quantitatively predictive. Model deviations are shown to emerge for systems with incomplete mixing. Finally, this model is analytical and may serve as a basis for device and continuum scale rate modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Point defect energetics in gallium arsenide, a comprehensive density functional theory study

In materials, point defects often control or modify functional properties. To predict the performance of materials intended for application in optoelectronic devices, it is imperative to understand the properties of those point defects. For the first time, all six intrinsic defects of GaAs, a key optoelectronics material, and their charge transition levels are calculated using density functional theory with the HSE06 functional. For comparison, both PBE and r 2 SCAN calculations are also carried out. The HSE06 results are found to be in better agreement with experimental data than previous calculations. In conclusion, the importance of using the exact electron exchange present in hybrid functionals and larger supercells to accurately determine defect levels and ground state defect configurations is demonstrated.

36 MATERIALS SCIENCE↗

Inflation at the GUT scale in a Higgsless universe

We revisit inflation in induced gravity. Our focus is on models where the low scale Planck mass is completely determined by the breaking of the scaling symmetry in the field theory sector. The Higgs-like field which breaks the symmetry with a GUT-scale vacuum expectation value (vev) has nonminimal couplings to the curvature, induced by the gravitational couplings of the other light fields in the theory, so that its vev controls the gravitational strength. This field can drive inflation and give a low energy universe in very good agreement with the cosmological observations. The low energy dynamics of the standard model cannot be unitarized by the Higgsflaton, which decouples from the low energy theory, both because it picks up a large mass and because its direct couplings to the low energy modes are weakened. Instead, the short distance behavior of the standard model may be regulated by the dynamics of other light degrees of freedom, such as in Higgsless models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗