Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Computer performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Final stages of transition to turbulence in plane channel flow

This paper involves a numerical simulation of the final stages of transition to turbulence in plane channel flow at a Reynolds number of 1500. Three-dimensional incompressible Navier-Stokes equations are numerically integrated to obtain the time evolution of two- and three-dimensional finite-amplitude disturbances. Computations are performed on the CYBER-203 vector processor for a 32 x 51 x 32 grid. Solutions indicate the existence of structures similar to those observed in the laboratory and characteristics of the various stages of transition that lead to final breakdown. In particular, evidence points to the formation of a upside-down-V-shaped vortex and the subsequent system of horseshoe vortices inclined to the main flow direction as the primary elements of transition. Details of the resulting flow field after breakdown indicate the evolution of streaklike formations found in turbulent flows. Although the flow field does approach a steady state (turbulent channel flow), the introduction of subgrid-scale terms seems necessary to obtain fully developed turbulence statistics.

Biringen, S.↗

The resonance lines of Hg II in IUE spectra of chemically peculiar stars

Twenty IUE images of chemically peculiar (CP) stars are analyzed to demonstrate that the previously detected Hg II overabundances in CP stars is real. Attention was focused on the Hg II resonance lines at 1650 and 1942 A. A total of eight stars were scanned and spectrum synthesis computations were performed to characterize the model atmospheres for each object. The 1942 A line was found to be insensitive to effective temperature, microturbulence and isotopic mixture influences, and therefore well-suited to abundance analyses. A non-LTE process was ruled out as a source of the Hg anomaly. Finally, it is suggested that diffusion-type processes be attributed to Hg enhancements in main sequences B stars.

Leckrone, D. S.↗

Large eddy simulation - The next five years

The prospect of major improvements in the performance of computers in the next five years means that large eddy simulation (LES), which has until now been strictly a research tool, may become a top-of-the-line engineering tool. In this paper, the historical development and past contributions of LES are reviewed. Then a discussion of the potential for applications of LES in new areas and of the developments needed to make LES a tool for the practicing engineer is given.

Ferziger, J. H.↗

Computational wing design in support of an NLF variable sweep transition flight experiment

A natural laminar flow outer panel wing glove has been designed for a variable sweep fighter aircraft using state-of-the-art computational techniques. Testing of the design will yield wing pressure and boundary-layer data under actual flight conditions and environment. These data will be used to enhance the understanding of the interaction between crossflow and Tollmien-Schlichting disturbances on boundary-layer transition. The outer wing panel was contoured such that a wide range of favorable pressure gradients could be obtained on the wing upper surface. Extensive computations were performed to support the design effort which relied on two- and three-dimensional transonic design and analysis techniques. A detailed description of the design procedure that evolved during this study is presented. Results on intermediate designs at various stages in the design process demonstrate how the various physical and aerodynamic constraints were integrated into the design. Final results of the glove design analyzed as part of the complete aircraft configuration with a full-potential wing/body analysis code indicate that the aerodynamic design objectives were met.

Waggoner, E. G.↗

On Wahlin's mechanism of cloud electrification

Computations were performed to explore the consequences of Wahlin's suggestion that a powerful mechanism of thundercloud electrification is provided, in the presence of a substantial updraft, by the preferential capture of negative ions on the water droplets of a cloud. The mechanism seems capable of providing, on time scales of 10-15 min, electric fields of several tens of kV/m.

Dangelo, N.↗

Finite-difference computations of rotor loads

This paper demonstrates the current and future potential of finite-difference methods for solving real rotor problems which now rely largely on empiricism. The demonstration consists of a simple means of combining existing finite-difference, integral, and comprehensive loads codes to predict real transonic rotor flows. These computations are performed for hover and high-advance-ratio flight. Comparisons are made with experimental pressure data.

Caradonna, F. X.↗

Vortex-scalar element calculations of a diffusion flame stabilized on a plane mixing layer

The vortex-scalar element method, a scheme which utilizes vortex elements to discretize the region of high vorticity and scalar elements to represent species or temperature fields, is utilized in the numerical simulations of a two-dimensional reacting mixing layer. Computations are performed for a diffusion flame at high Reynolds and Peclet numbers without resorting to turbulence models. In the nonreacting flow, the mean and fluctuation profiles of a conserved scalar show good agreement with experimental measurements. Results for the reacting flow indicate that for temperature independent kinetics, the chemical reaction begins immediately downstream of the splitter plate where mixing starts. Results for the reacting flow with Arrhenius kinetics show an ignition delay, which depends on reactant temperature, before significant chemical reaction occurs. Harmonic forcing changes the structure of the layer, and concomitantly the rates of mixing and reaction, in accordance with experimental results. Strong stretch within the braids in the nonequilibrium kinetics case causes local flame quenching due to the temperature drop associated with the large convective fluxes.

Ghoniem, Ahmed F.↗

Gas scintillation drift chambers with wave shifter read-out for hard X-ray astronomy

A major improvement in hard X-ray and gamma ray astrophysics could be provided by high pressure xenon time projection chambers where gas scintillation is used both for the measurement of the time of interaction and for the detection of the extracted electrons. This allows three dimensional imaging of naturally complex events (photoelectric interaction with escape photon, Compton scatter, and pair production). A novel read-out system based on wave shifter fibers, which is well suited to the high pressures and large areas required of a hard X-ray telescope is proposed. Expected performances are computed, potential problems are outlined, and the experimental effort to solve these problems are described.

Sadoulet, Bernard↗

Image coding of SAR imagery

Five coding techniques in the spatial and transform domains have been evaluated for SAR image compression: linear three-point predictor (LTPP), block truncation coding (BTC), microadaptive picture sequencing (MAPS), adaptive discrete cosine transform (ADCT), and adaptive Hadamard transform (AHT). These techniques have been tested with Seasat data. Both LTPP and BTC spatial domain coding techniques provide very good performance at rates of 1-2 bits/pixel. The two transform techniques, ADCT and AHT, demonstrate the capability to compress the SAR imagery to less than 0.5 bits/pixel without visible artifacts. Tradeoffs such as the rate distortion performance, the computational complexity, the algorithm flexibility, and the controllability of compression ratios are also discussed.

Chang, C. Y.↗

A vectorized Poisson solver over a spherical shell and its application to the quasi-geostrophic omega-equation

The quasi-geostrophic omega-equation in flux form is developed as an example of a Poisson problem over a spherical shell. Solutions of this equation are obtained by applying a two-parameter Chebyshev solver in vector layout for CDC 200 series computers. The performance of this vectorized algorithm greatly exceeds the performance of its scalar analog. The algorithm generates solutions of the omega-equation which are compared with the omega fields calculated with the aid of the mass continuity equation.

Mullenmeister, Paul↗

Analysis of a closed-kinematic chain robot manipulator

Presented are the research results from the research grant entitled: Active Control of Robot Manipulators, sponsored by the Goddard Space Flight Center (NASA) under grant number NAG-780. This report considers a class of robot manipulators based on the closed-kinematic chain mechanism (CKCM). This type of robot manipulators mainly consists of two platforms, one is stationary and the other moving, and they are coupled together through a number of in-parallel actuators. Using spatial geometry and homogeneous transformation, a closed-form solution is derived for the inverse kinematic problem of the six-degree-of-freedom manipulator, built to study robotic assembly in space. Iterative Newton Raphson method is employed to solve the forward kinematic problem. Finally, the equations of motion of the above manipulators are obtained by employing the Lagrangian method. Study of the manipulator dynamics is performed using computer simulation whose results show that the robot actuating forces are strongly dependent on the mass and centroid locations of the robot links.

Nguyen, Charles C.↗

Numerical simulation of self-sustained and forced oscillations in jet shear layers

Excitation of axisymmetric jet shear layers has been investigated by solving the time-dependent compressible Navier-Stokes equations. MacCormack's explicit finite difference scheme is used in performing the computations on a CRAY X-MP computer. This work examines the influence of various means of excitation of the shear layer, to produce large scale vortex structures in such a manner that the mixing between two flows will be enhanced or diminished. While successful pressure excitation has been achieved in previous studies only limited success with temperature excitation at the inflow boundary has been accomplished. The current study focuses on the use of temperature excitation through the boundary layer immediately inside the jet lip. In order to achieve the required resolution significant grid refinement is necessary. The results of the computation with and without temperature excitation are analyzed and compared with results obtained using pressure excitation. The influence of amplitude and frequency on specific flow characteristics are also examined. The excitation frequency for both the temperature and pressure corresponds to a Strouhal number of .45 and the inflow jet Mach number is approximately .3.

Scott, J. N.↗

A Three-Dimensional, Time-Dependent Numerical Modeling of Super-Sonic, Super-Alfvenic MHD Flow

A three-dimensional, time-dependent, MHD disturbance propagating through a steady inhomogeneous MHD flow is analyzed by a numerical model based on the Lax-Wendroff finite difference method. The initial steady MHD flow is assumed to be supersonic and super-Alfvenic. The background steady MHD flow is obtained by dropping the time-dependent terms in the unsteady MHD equations. A transient MHD disturbance corresponding to a MHD shock is generated at the lower radial boundary surface. The resulting development and propagation of 3-D MHD disturbances interacting with the background steady MHD flow are numerically simulated in this first application to the field of interplanetary physics. Detailed descriptions of the mathematical formulation and numerical methodology are presented. Example computations are performed to demonstrate the validity of the formulation and the capabilities of the model.

Han, S. M.↗

Comparison of flux-vector and flux-difference splitting techniques for hypersonic flow

Some numerical aspects of flux-vector splitting (FVS) and flux-difference splitting (FDS) schemes are investigated to determine the accuracy for the shock and expansion waves in hypersonic blunt body flow fields. The analysis includes the implementation of Steger-Warming's three-component FVS (Reklis and Thomas, 1981), van Leer's (1986) FVS, and Yang's (1985) FDS to the right-hand side of a time marching scheme where the left-hand side is a variant of the incremental line Gauss-Seidel scheme. Numerous computations are performed by blending two simple flux limiters to test the various schemes on a generic aerobrake at M(infinity) = 10 and zero angle of attack. It is found that the flux limiter plays a very important role in the accuracy of shock capturing. The steady state results are compared to those of a shock-fitting scheme and advantages and disadvantages of each scheme are discussed briefly.

Wey, T. C.↗

A numerical investigation of the influence of heating on the excitation of high and low Mach number jet flows

The influence of heating and velocity on the unsteady nature of jet mixing layers is investigated by solving the time-dependent compressible Navier-Stokes equations using MacCormack's explicit finite difference algorithm. The computations are performed for jet Mach numbers of 0.3 and 0.8 with flow total temperatures up to 800 K. The Reynolds number ranges from 3 x 10 to the 5th to 1.3 x 10 to the 6th. Excitation is accomplished by imposing an acoustic pressure signal inside the jet duct. The objective of this effort is to compare the response of heated and unheated jets with acoustic excitation at high and low subsonic Mach numbers. The preliminary results indicate that without acoustic excitation the mixing in the heated jet is greater than in the unheated case. It has also been found that for the low speed heated jets (M = 0.3, Tt = 672K) acoustic excitation causes the production of large scale vortex structures to occur in a regular periodic manner with organized periodic pairing at some Strouhal numbers. These results are in agreement with experimental data.

Scott, J. N.↗

SSME LOX post flow analyses/fluid structure interaction

Test firings of the Space Shuttle Main Engine (SSME) over the course of its development have resulted in several catastrophic failures. Some of these failures were due to breakage of the LOX posts that feed liquid oxygen into the main injector head of the engine. The objective was to perform a computational fluid flow analysis of a simplified SSME LOX post array using an existing viscous Navier-Stokes flow solver. A two-dimensional analysis was to be made. In addition, a finite element theory for treating the fluid/structure interaction between the posts and the hot gas environment was to be developed. The methodology used in computing the flow field through the LOX post array is described. Results are presented and discussed.

Source record↗

Earth rocks on Mars: Must planetary quarantine be rethought

Recent geochemical, isotopic, and rare gas studies suggest that eight SNC meteorites originated on the planet Mars. Since Martian rocks are found on Earth, consideration is being given to finding Earth rocks on Mars. Detailed consideration of the mechanism by which these meteorites were lofted into space strongly suggest that the process of stress-wave spallation near a large impact with, perhaps, an assist from vapor plume expansion, is the fundamental process by which lightly-shocked rock debris is ejected into interplanetary space. The theory of spall ejection was used to examine the mass and velocity of material ejected from the near vicinity of an impact. It seems likely that the half-dozen largest impact events on Earth would have ejected considerable masses of near surface rocks into interplanetary space. No computations were performed to indicate how long Earth ejecta would take to reach Mars.

Melosh, H. J.↗

Comparison of 3D computation and experiment for non-axisymmetric nozzles

Three dimensional solutions of a single expansion ramp nozzle are computed with the existing PARC computer code by solving the full Navier-Stokes equations. The computations are performed to simulate the non-axisymmetric nozzle flowfield in both the internal/external expansion regions and the exhaust plume in a quiescent ambient environment. Two different configurations of the nozzle at a pressure ratio NPR = 10 are examined. Numerical results of laminar flows are presented, and the wall pressure distributions are compared with the experimental data.

Lai, H.↗