Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Completeness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Completion of the Viking Labeled Release experiment on Mars

The final Labeled Release (LR) cycle on each Viking lander tested a surface sample that had been stored for several months at approximately 10 C prior to the onset of the active sequence. At each lander site, activity was strongly diminished. This thermal sensitivity of the active agent on the surface of Mars is consistent with a biological explanation of the LR experiment. At the end of one of these cycles, the incubation mixture was heated to 50 C to release any radioactive gas trapped in the sample matrix. The results suggest that more than one carbon substrate is involved in the LR reaction on Mars. The thermal data from the stored samples, coupled with data from previous cycles, have formed the basis for evaluation of the thermal decomposition of the Mars active agent. The slope of the resulting Arrhenius plot has been used to test the fit of other flight data and to calculate the activation energy for thermal decomposition of the Mars agent. The results and their interpretation still leave unresolved the question of whether the Mars LR data were generated by biological or chemical activity.

Levin, G. V.↗

Complete solution of Boolean equations

A method is presented for generating a single formula involving arbitary Boolean parameters, which includes in it each and every possible solution of a system of Boolean equations. An alternate condition equivalent to a known necessary and sufficient condition for solving a system of Boolean equations is given.

Tapia, M. A.↗

Completion of evaluation of manufacturing processes for B/Al composites containing 0.2mm diameter boron fibers

Four fabricators produced a total of 54 B/1100 Al, B/6061 Al, and B/2024 Al panels for evaluation. The 8 ply unidirectional, 45 to 50 volume percent, panels were made using 0.20 mm diameter boron fibers which were obtained from a single supplier. Hot press consolidation was carried out in vacuum except for one set of dry woven tape panels which were hot pressed in air. A single testing contractor conducted nondestructive inspection, metallography, fractography and mechanical property tests. The mechanical property tests included 21 and 260 C tensile tests and 21 C shear tests. Panel quality, as measured by nondestructive evaluation, was generally good as were the 21 C tensile properties. The panels hot pressed in air delaminated in the shear tests. Shear strength values were lower in these panels. But tensile strengths were not affected by the delaminations because of the relation between the tensile loading direction and the delaminations. Composite tensile strength was found to be proportional to the volume percent boron and the aluminum matrix rather than to the tape used or fabrication technique. Suitability of these composites for 260 C service was confirmed by tensile tests.

Moore, T. J.↗

The fusion of MBB with VFW finally brought to completion

Two newspaper type articles describing the final, long awaited unification of the two German Air and Space companies, MBB and VFW are presented. Government participation in this "fusion" arrangement and the advantages expected to accrue are discussed.

Source record↗

Photoelastic techniques for the complete determination of stresses in composite structures

Three methods of photoelastic analysis are examined. The first method is an extension of the oblique incidence technique in which the model (or the light beam) is rotated about one of the material symmetry axes. In the second method, transmission and reflection photoelastic responses are combined. The third method requires the drilling of small holes and the determination of the fringe orders at selected points on the hole boundary. The three methods are applied to an orthotropic circular disk under diametral compression. Results are compared with strain gage data.

Prabhakaran, R.↗

Photoelastic techniques for the complete determination of stresses in composite structures

Three new methods are proposed for determining the individual values of the principal stresses or strains in an orthotropic birefringent model using transmission photoelastic analysis. One of the methods is an extension of the oblique incidence technique in which the model (or the light beam) is rotated about one of the material symmetry axes. In another method, transmission and reflection photoelastic responses are combined, while in the third method small circular holes are drilled at points of interest and the isochromatic fringe order is measured at selected points on the hole boundary. The three methods are applied to an orthotropic disc under diametral compression and results are compared with strain gage data.

Prabhakaran, R.↗

The seasonal and global behavior of water vapor in the Mars atmosphere - Complete global results of the Viking atmospheric water detector experiment

A key question regarding the evolution of Mars is related to the behavior of its volatiles. The present investigation is concerned with the global and seasonal abundances of water vapor in the Mars atmosphere as mapped by the Viking Mars Atmospheric Water Detector (MAWD) instrument for almost 1-1/2 Martian years from June 1976 to April 1979. Attention is given to the implications of the observed variations for determining the relative importance of those processes which may be controlling the vapor cycle on a seasonal basis. The processes considered include buffering of the atmosphere water by a surface or subsurface reservior of ground ice, physically adsorbed water, or chemically bound water. Other processes are related to the supply of water from the residual or seasonal north polar ice cap, the redistribution of the vapor resulting from atmospheric circulation, and control of the vapor holding capacity of the atmosphere by the local atmospheric temperatures.

Jakosky, B. M.↗

LANDSAT land cover analysis completed for CIRSS/San Bernardino County project

The LANDSAT analysis carried out as part of Ames Research Center's San Bernardino County Project, one of four projects sponsored by NASA as part of the California Integrated Remote Sensing System (CIRSS) effort for generating and utilizing digital geographic data bases, is described. Topics explored include use of data-base modeling with spectral cluster data to improve LANDSAT data classification, and quantitative evaluation of several change techniques. Both 1976 and 1979 LANDSAT data were used in the project.

Likens, W.↗

A survey by HEAO 1 of clusters of galaxies. III - The complete Abell catalog

A catalog of 128 X-ray emitting clusters, including the Virgo Cluster, is presented. Ninety-one of these are new identifications. The catalog was obtained by searching the HEAO 1 survey observations for coincidences of X-ray sources with Abell clusters. The distribution of these sources in the sky has been examined in search of associations with other Abell clusters, with a null result. The X-ray luminosity has been correlated with cluster richness, but no association with Bautz-Morgan class has been found. The cluster luminosity function has been evaluated, and using this function the contribution of clusters to the diffuse X-ray background radiation has been estimated. It amounts to less than 15% at 2 keV and 3% at 6 keV.

Johnson, M. W.↗

Toward a complete inventory of stratospheric dust particles with implications and their classification

As the Earth travels about the Sun it continuously sweeps up material laying in its path. The material includes dust-sized fragments of the meteors, comets and asteroids that have passed by as well as much older particles from out between the stars. These grains first become caught in the mesosphere and then slowly pass down through the stratosphere and the troposphere, finally raining down upon the Earth's surface. In the stratosphere the cosmic dust particles encounter increasing amounts of contaminants from the Earth. At the highest reaches of Earth's atmosphere these contaminants consists mainly of dust from the most explosive volcanoes, rocket exhaust, and other manmade space debris. In the troposphere windborne particles and pollen become an increasingly larger fraction of the atmospheric dust load. An increased knowledge of the nature of cosmic particles is suggested.

Zolensky, M. E.↗

Thermal analysis of a planetary transmission with spherical roller bearings operating after complete loss of oil

Planetsys and Spherbean, two computer programs developed for the analysis of rolling element bearings, were used to simulate the thermal performance of an OH-58 helicopter main rotor transmission. A steady state and a transient thermal analysis were made and temperatures thus calculated were compared with experimental data obtained from a transmission that was operated to destruction, which occurred about 30 min after all the oil was drained from the transmission. Temperatures predicted by Spherbean were within 3% of the corresponding measured values at 15 min elapsed time and within 9% at 25 min. Spherbean also indicates a potential for high bearing cage temperatures with misalignment and outer ring rotation.

Coe, H. H.↗

Complete flowfields over low and wide angle AOTV conceptual configurations

Flowfields over two conceptual aeroassisted orbital transfer vehicles, a moderate lift-to-drag ratio biconic, and an axisymmetric zero lift aerobrake are investigated. The solution procedures employ a compressible Navier-Stokes time-asymptotic technique for blunt body flow and a Parabolized Navier-Stokes spatial marching technique for the primarily supersonic shock layer flow over low-angle bodies. Emphasis is placed on the laminar convective heating predictions and comparisons to experimental data where available. Code robustness and solution times are discussed and guidelines are given for the specification of various numerical parameters. The Parabolized Navier-Stokes technique has a high probability of solution success for the range of applications considered herein, and very good comparisons with experimental heat-transfer data have been obtained. The blunt body Navier-Stokes code is more sensitive to parameter specification for the aerobrake calculations. Still, coarse grid solutions can be obtained quickly to get a good first cut at flowfield definition. Fair to good comparisons have been obtained between experimental heating and pressure data and coarse and fine grid solutions.

Gnoffo, P. A.↗

Modeling the directional reflectance from complete homogeneous vegetation canopies with various leaf-orientation distributions

The directional-reflectance distributions of radiant flux from homogeneous vegetation canopies with greater than 90 percent ground cover are analyzed with a radiative-transfer model. The model assumes that the leaves consist of small finite planes with Lambertian properties. Four theoretical canopies with different leaf-orientation distributions were studied: erectophile, spherical, planophile, and heliotropic canopies. The directional-reflectance distributions from the model closely resemble reflectance distributions measured in the field. The physical scattering mechanisms operating in the model explain the variations observed in the reflectance distributions as a function of leaf-orientation distribution, solar zenith angle, and leaf transmittance and reflectance. The simulated reflectance distribution show unique characteristics for each canopy. The basic understanding of the physical scattering properties of the different canopy geometries gained in this study provide a basis for developing techniques to infer leaf-orientation distributions of vegetation canopies from directional remote-sensing measurements.

Kimes, D. S.↗

A complete sample of quasars at B = 19.80

A quasar candidate spectroscopic UV-excess survey with B less than 19.80 has yielded 35 quasars in the 1.75 sq deg region studied. The X-ray data for the 35 quasars are used to show that quasars with B lower than 19.80 and z lower than 2.2 constitute 24 + 10, -8 percent of the observed X-ray background at 2 keV. This sample is combined with one containing 22 quasars with B values lower than 18.25, and it is noted that fits of evolution and luminosity functions are substantially similar to previous results, although the confidence limits for the model parameters are reduced by a factor of 2. Pure luminosity evolution models are found to produce very good fits to the observed N(less than B) data, and are used to estimate the overall contribution of quasars to the X-ray background.

Marshall, H. L.↗

Meteorite concentrations in Antarctica: How complete is the picture?

The importance of ice sheet flow as part of the process of concentrating meteorites in Antarctica is discussed. Ford and Tabor were the first to surmise that some type of ice sheet transport of Antarctic meteorites was likely considering that the Thiel Mountains pallasite was found on glacier ice without evidence of impact. It was found that meteorites were carried by the ice to regions of high ablation where they were periodically uncovered. Three models of concentration have been proposed to explain the phenomena of meteorite accumulations on blue ice fields. Model 1, is a general picture relating meteorite fall and accumulation to the entire Antarctic continent. Model 2 is based upon the petrographic examination of an 8m ice core from the Allan Hills Icefield and suggests a local origin of ice from the catchment basin. The third model is presented by Whillans and Cassidy who infer, by using conventional ice flow concepts, a path length as long as 1,000km from the sites of fall to recovery for Allan Hills specimens. Despite achievement of these working hypotheses, a number of questions must be resolved before a comprehensive model can be presented.

Annexstad, J. O.↗

Implications of complete watershed soil moisture measurements to hydrologic modeling

A series of six microwave data collection flights for measuring soil moisture were made over a small 7.8 square kilometer watershed in southwestern Minnesota. These flights were made to provide 100 percent coverage of the basin at a 400 m resolution. In addition, three flight lines were flown at preselected areas to provide a sample of data at a higher resolution of 60 m. The low level flights provide considerably more information on soil moisture variability. The results are discussed in terms of reproducibility, spatial variability and temporal variability, and their implications for hydrologic modeling.

Engman, E. T.↗