Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Effect of p-type multi-walled carbon nanotubes for improving hydrogen storage behaviors

In this study, the hydrogen storage behaviors of p-type multi-walled carbon nanotubes (MWNTs) were investigated through the surface modification of MWNTs by immersing them in sulfuric acid (H{sub 2}SO{sub 4}) and hydrogen peroxide (H{sub 2}O{sub 2}) at various ratios. The presence of acceptor-functional groups on the p-type MWNT surfaces was confirmed by X-ray photoelectron spectroscopy. Measurement of the zeta-potential determined the surface charge transfer and dispersion of the p-type MWMTs, and the hydrogen storage capacity was evaluated at 77 K and 1 bar. From the results obtained, it was found that acceptor-functional groups were introduced onto the MWNT surfaces, and the dispersion of MWNTs could be improved depending on the acid-mixed treatment conditions. The hydrogen storage was increased by acid-mixed treatments of up to 0.36 wt% in the p-type MWNTs, compared with 0.18 wt% in the As-received MWNTs. Consequently, the hydrogen storage capacities were greatly influenced by the acceptor-functional groups of p-type MWNT surfaces, resulting in increased electron acceptor–donor interaction at the interfaces. - Graphical abstract: Hydrogen storage behaviors of the p-type MWNTs with the acid-mixed treatments are described. Display Omitted Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anisotropic magnetic behaviors of monoclinic Li{sub 3}Fe{sub 2}(PO{sub 4}){sub 3}

Large sized α-Li{sub 3}Fe{sub 2}(PO{sub 4}){sub 3} single crystals with high quality are successfully grown by a flux method. Magnetic behaviors of the grown crystals are investigated by means of magnetic susceptibility, magnetization, and heat capacity measurements along different directions. The results confirm that α-Li{sub 3}Fe{sub 2}(PO{sub 4}){sub 3} exhibits weak ferrimagnetic behaviors at low temperature, which are in good agreement with those reported previously. However magnetic anisotropy is confirmed for the first time, suggesting that the c-axis is the likely magnetic easy axis and the a-axis is the magnetic hard one. Two anomalies are clearly observed in magnetic susceptibility along the a-axis and heat capacity data at zero field, suggesting the appearance of two successive magnetic transitions at ∼26 and ∼22 K in the system. - Graphical abstract: Magnetic anisotropy is confirmed for the first time using a single crystal sample of α-Li{sub 3}Fe{sub 2}(PO{sub 4}){sub 3} obtained by the flux method. - Highlights: • Large-sized single crystals of α-Li{sub 3}Fe{sub 2}(PO{sub 4}){sub 3} are grown by the flux method. • Magnetic anisotropy is confirmed for the first time in the system. • Two successive magnetic transitions are observed along the a-axis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-temperature behavior of dicesium molybdate Cs{sub 2}MoO{sub 4}: Implications for fast neutron reactors

Dicesium molybdate (Cs{sub 2}MoO{sub 4})'s thermal expansion and crystal structure have been investigated herein by high temperature X ray diffraction in conjunction with Raman spectroscopy. This first crystal-chemical insight at high temperature is aimed at predicting the thermostructural and thermomechanical behavior of this oxide formed by the accumulation of Cs and Mo fission products at the periphery of nuclear fuel rods in sodium-cooled fast reactors. Within the temperature range of the fuel's rim, Cs{sub 2}MoO{sub 4} becomes hexagonal P6{sub 3}/mmc, with disordered MoO{sub 4} tetrahedra and 2D distribution of Cs–O bonds that makes thermal axial expansion both large (50≤α{sub l}≤70 10{sup −6} °C{sup −1}, 500–800 °C) and highly anisotropic (α{sub c}−α{sub a}=67×10{sup −6} °C{sup −1}, hexagonal form). The difference with the fuel's expansion coefficient is of potential concern with respect to the cohesion of the Cs{sub 2}MoO{sub 4} surface film and the possible release of cesium radionuclides in accidental situations. - Graphical abstract: The weakness of the Cs–O bonds and the disordering of the MoO{sub 4} tetrahedra array in the high-temperature form are responsible for the huge thermal expansion of Cs{sub 2}MoO{sub 4} along the c-axis. - Highlights: • Thermomechanical behavior of Cs{sub 2}MoO{sub 4} fission products compound is studied. • High-temperature form of Cs{sub 2}MoO{sub 4} is characterized by XRD and Raman. • Thermal expansion appears very high and anisotropic. • Cohesion between Cs{sub 2}MoO{sub 4} and nuclear fuel seems questionable, and Cs release is expected.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ag{sub 1.75}InSb{sub 5.75}Se{sub 11}: A new noncentrosymmetric compound with congruent-melting behavior

A new type of quaternary selenide Ag{sub 1.75}InSb{sub 5.75}Se{sub 11} has been synthesized. It crystallizes in the non-centrosymmetric space group Cm of monoclinic system, with a=13.419 (1) Å, b=4.084 (1) Å, and c=19.165 (2) Å, Z=2. The compound has a new three-dimensional layer structure which consists of infinite {sup 2}{sub ∞}[AgSb{sub 2}Se{sub 4}] layers and {sup 2}{sub ∞}[Ag1(Sb6)Ag3InSb{sub 3}Se{sub 8}] layers. The band gap of Ag{sub 1.75}InSb{sub 5.75}Se{sub 11} is 0.94(2) eV, which agrees with its dark gray color. Moreover, the compound exhibits congruent-melting behavior. - Graphical abstract: Ag{sub 1.75}InSb{sub 5.75}Se{sub 11} has a new three-dimensional layer structure which consists of infinite {sup 2}{sub ∞}[AgSb{sub 2}Se{sub 4}] layers and {sup 2}{sub ∞}[Ag1(Sb6)Ag3InSb{sub 3}Se{sub 8}] layers. - Highlights: • The new quaternary selenide Ag{sub 1.75}InSb{sub 5.75}Se{sub 11} has been synthesized. • It crystallizes in non-centrosymmetric space group Cm and has a new layer structure. • The structure consists of {sup 2}{sub ∞}[AgSb{sub 2}Se{sub 4}] layers and {sup 2}{sub ∞}[Ag1(Sb6)Ag3InSb{sub 3}Se{sub 8}] layers. • The band gap of Ag{sub 1.75}InSb{sub 5.75}Se{sub 11} is 0.94(2) eV. • The compound exhibits congruent-melting behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Redox-active porous coordination polymer based on trinuclear pivalate: Temperature-dependent crystal rearrangement and redox-behavior

Linking of trinuclear pivalate Fe{sub 2}NiO(Piv){sub 6} (Piv=O{sub 2}CC(CH{sub 3}){sub 3}) by 2,6-bis(4-pyridyl)-4-(1-naphthyl)pyridine (L) resulted in formation of 1D-porous coordination polymer Fe{sub 2}NiO(Piv){sub 6}(L)·Solv, which was characterized in two forms: DMSO solvate Fe{sub 2}NiO(Piv){sub 6}(L)(DMSO)·2.5DMSO (1) or water solvate Fe{sub 2}NiO(Piv){sub 6}(L)(H{sub 2}O) (2). X-ray structure of 1 was determined. Crystal lattice of 1 at 160 K contained open channels, filled by captured solvent, while temperature growth to 296 K led to the crystal lattice rearrangement and formation of closed voids. Redox-behavior of 2 was studied by cyclic voltammetry for a solid compound, deposited on glassy-carbon electrode. Redox-activity of L preserved upon incorporation in the coordination polymer. The presence of pores in desolvated sample Fe{sub 2}NiO(Piv){sub 6}(L) was confirmed by the measurements of N{sub 2} and H{sub 2} adsorption at 77 K. Potential barriers of the different molecules diffusion through pores were estimated by the means of molecular mechanics. - Graphical abstract: Redox-behavior of 1D-porous coordination polymer Fe{sub 2}NiO(Piv){sub 6}(L)(H{sub 2}O) was studied by cyclic voltammetry in thin film, deposited on glassy-carbon electrode. Redox-activity of L preserved upon incorporation in the coordination polymer. Potential barriers of different molecules diffusion through pores were estimated by the means of molecular mechanics. - Highlights: • Porous 1D coordination polymer was synthesized. • Temperature growth led to pores closing due to crystal lattice rearrangement. • Redox-activity of ligand preserved upon incorporation into coordination polymer. • Redox-properties of solid coordination polymer were studied in thin film. • Diffusion barriers were evaluated by molecular mechanics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High magnetic field induced spin flip/flop behavior and magnetic phase diagram of CuFe{sub 1−x}Ga{sub x}O{sub 2}

The structure and magnetic properties of non-magnetic Ga{sup 3+} ion doped CuFe{sub 1−x}Ga{sub x}O{sub 2} (x=0, 0.03, and 0.05) single crystal samples were investigated. X-ray diffraction patterns analysis confirms that the samples are single-phase crystallizing. Doping effect on the magnetic behavior of the ground state and the field-induced spin flip/flop transitions were detected. The transition temperatures and critical magnetic fields of the spin flip/flop, as well as the magnetic hysteresis directly depend on the Ga{sup 3+} doping level. Such doping effects may associate with the competition between dilution effect (partial release of spin frustration) and the induced local magnetic moment, which is the result of the changed magnetic coupling both inter- and intra-planes of Fe ions. Based on the experimental results, the effects of Ga{sup 3+} doping on the spin flip/flop behavior and a detailed high field magnetic diagram were assumed. - Graphical abstract: Temperature dependence of the critical fields for CuFe{sub 1−x}Ga{sub x}O{sub 2} (x=0, 0.03, 0.05). (a) and (b) The magnetic field's parallel and perpendicular cases respectively. In which, the square, circle and triangular represent x=0, 0.03 and 0.05 respectively. - Highlights: • Single crystal samples of CuFe{sub 1−x}Ga{sub x}O{sub 2} (x=0, 0.03 and 0.05) were grown. • Magnetic field dependence of magnetization was measured in pulsed high magnetic field up to 54 T with different temperatures. • The magnetic field induced multi-step-like transitions were observed in all the single crystal samples. • A detailed magnetic diagram was assumed based on the experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dissociation behavior of protons incorporated in yttrium doped barium zirconate

The dissociation behavior of protons incorporated in yttrium-doped barium zirconate (BZY20) was investigated via combination of in-situ diffuse reflectance Fourier transform infrared spectroscopy (FT-IR) and evolved gas analysis. The vicinities of dopant or host ions were considered as sites of proton dissolution. The temperature dependence of the dissociation of protons from each site was evaluated. Protons which were considered to have dissolved in the vicinity of dopant ions were easily removed and dissociated as water. On the other hand, those which dissolved in the vicinity of host ions were dissociated as hydrogen at high temperatures. Such dissociation behavior was also detected after using D{sub 2}O saturated gas for pre-treatment. These results suggest that some protons which dissolved in the perovskite oxide could dissociate as hydrogen without forming oxygen vacancies. (131words) - Graphical abstract: Different dissociation reactions of protons from yttria doped barium zirconate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights into the phase stability window, phase transformation behavior, and anisotropic thermal expansion of rhombohedral bismuth oxide

Rhombohedral bismuth oxide has emerged as a promising SOFC electrolyte material, particularly at low-to-intermediate temperatures. The stability window of this phase was explored using a co-doped system, using yttrium and lanthanum or aluminum, over 7.5–25 % total dopant content and 0.907–1.154 Å weighted average dopant cationic radius. The phase transformation behavior of rhombohedral-rich phase mixtures was also investigated in situ from 360 to 656 °C to assess the effects of minor impurity phases and thermal evolution pathways. Our results reveal that low-dopant, rhombohedral-rich compositions exhibit poor structural stability upon heating. Anisotropic thermal expansion behavior was observed over 450–656 °C, serving as a sensitive indicator of sequential phase changes, including the rhombohedral β2-to-β1 transition (∼450 °C), monoclinic phase formation, and delayed or incomplete formation of the cubic phase (∼ 550 °C). These multiple unfavorable phase transitions compromise the mechanical robustness required for SOFC operation. This study underscores the need for compositional tuning to balance ionic conductivity with thermal phase stability in rhombohedral Bi 2 O 3 -based systems.

36 MATERIALS SCIENCE↗

Mechanical behavior and fracture characterization of a monocrystalline Cu-Al-Ni subjected to thermal cycling treatments under load

The mechanical behavior and fracture characteristics resulting from thermal cycling treatments under different applied loads were investigated in a monocrystalline Cu-13.5 wt.%Al-4.0 wt.%Ni alloy. The treatments consisted of 300 cycles in the temperature interval between 0 deg. C (close to M{sub f}) and 100 deg. C (above A{sub f}), under applied load conditions of 0.2 and 0.5 kg corresponding, respectively, to stresses of 11 x 10{sup -2} and 28 x 10{sup -2} MPa. Following each treatment, the specimens were tested in compression until fracture at room temperature. In addition to the compression results, the mechanical behavior was also evaluated by microhardness tests. Structural changes related to phase transformations were characterized by X-ray diffraction and the fracture characteristics were analyzed by scanning electron microscopy. It was found that the thermal cycling treatments promote significant changes in the structure due to a reversible martensitic transformation. An increase in the applied load results in a decrease in both the pseudo-yield and the total strain. It also results in a lower fracture resistance owing to additional deformation accumulated during the cycling treatment, which provokes the reversible martensitic transformation.

36 MATERIALS SCIENCE↗

In-situ small-angle X-ray scattering study of the precipitation behavior in a Fe-25 at.%Co-9 at.%Mo alloy

Fe-Co-Mo alloys show extraordinary mechanical properties which make them potential candidates for various high-performance applications. In the present study, for the first time, the precipitation behavior in a Fe-25 at.%Co-9 at.%Mo alloy was studied by small-angle X-ray scattering using high-energy synchrotron radiation. The specimens were isothermally aged in an in-situ furnace. The small-angle X-ray scattering patterns showed scaling behavior and were evaluated by employing a model function from the literature. This approach provides information about the characteristic length scale and the volume fraction of the precipitates in the alloy.

36 MATERIALS SCIENCE↗

On the role of processing parameters in producing Cu/SiC metal matrix composites via friction stir processing: Investigating microstructure, microhardness, wear and tensile behavior

The main aim of this study is to produce copper reinforced metal matrix composite (MMC) layers using micron sized SiC particles via friction stir processing (FSP) in order to enhance surface mechanical properties. Microstructural evaluation using optical microscopy (OM) and scanning electron microscopy (SEM) indicated that an increase in traverse speed and a decrease in rotational speed cause a reduction in the grain size of stir zone (SZ) for the specimens friction stir processed (FSPed) without SiC particles. With the aim of determining the optimum processing parameters, the effect of traverse speed as the main processing variable on microstructure and microhardness of MMC layers was investigated. Higher traverse speeds resulted in poor dispersion of SiC particles and consequently reduced the microhardness values of MMC layers. It was found that upon addition of SiC particles, wear properties were improved. This behavior was further supported by SEM images of wear surfaces. Results demonstrated that the microcomposite produced by FSP exhibited enhanced wear resistance and higher average friction coefficient in comparison with pure copper. Tensile properties and fracture characteristics of the specimens FSPed with and without SiC particles and pure copper were also evaluated. According to the results, the MMC layer produced by FSP showed lower strength and elongation than pure copper while a remarkable elongation was observed for FSPed specimen without SiC particles. Research Highlights: {yields} Decrease in traverse speed leads to good dispersion of SiC particles in composites. {yields} No distinct TMAZ in side regions of SZ of FSPed specimens with SiC particles. {yields} Microhardness of FSPed specimens with SiC particles shows a remarkable increase. {yields} Reinforcement of Cu with SiC particles improves wear and friction behavior of surface. {yields} A weak bonding in tensile due to probable agglomeration for SiC containing samples.

36 MATERIALS SCIENCE↗

Structural and magnetic properties and evidence of spin-glass behavior induced by Fe-doping in perovskite manganites B-site

AMn{sub 1-x}Fe{sub x}O{sub 3} (A = La{sub 0.75}Ca{sub 0.08}Sr{sub 0.17} and x = 0-0.23) compounds, sintered at 700 deg. C, were characterized by X-ray diffraction (XRD) at room temperature. Rietveld refinement has shown that samples can be indexed in the orthorhombic (Pnma) structure for low Fe-content (x {<=} 0.046) and rhombohedral (R-3c) structure for high Fe-content (x {>=} 0.115). The transmission Moessbauer spectra have revealed the same isomer shift {delta} value assigned to Fe{sup 3+} ion for all compounds. The magnetization behavior and the Curie temperature T{sub C} have shown a large dependence on the fractional composition x. In fact, the M(T) curves have revealed the presence of a long-range ferromagnetic state below T{sub C} for compounds with x {<=} 0.115, and a spin-glass state (SGS) at low temperature for high Fe-content (x {>=} 0.177). Research Highlights: {yields} La{sub 0.75}Ca{sub 0.08}Sr{sub 0.17}Mn{sub 1-x}Fe{sub x}O{sub 3} compounds undergo a transition ortho-rhombo at x=0.046. {yields} On the rhombohedral phase, the magnetization is governed by the DE interaction {yields} The magnetization undergoes a strong decrease at high x-values (x{>=}0.115). {yields} Compounds show a strong AFM interaction with a spin-glass state at high Fe-content {yields} Hysteresis loops, M(H) confirm this behavior.

36 MATERIALS SCIENCE↗

Microstructure and oxidation behavior of NiCoCrAl/YSZ microlaminates produced by EB-PVD

Two NiCoCrAl/ZrO{sub 2}-Y{sub 2}O{sub 3} microlaminates (A and B) were fabricated by electron beam physical vapor deposition, which were different in layer number and metal-layer thickness. The layer number was 20 and 26, respectively. And the metal-layer thickness was 35 and 14 {mu}m, respectively. The microstructure and isothermal oxidation behavior were investigated. During the exposure in air at 1000 deg. C for 100 h, the t to m phase transformation occurred in the ceramic layers, and oxide scales formed at the surfaces of not only the outer metal-layers but also the internal metal-layers for the microlaminates. The oxidation rate of microlaminate B was greater than that of microlaminate A. Their overall mass gains were significantly dependent on the number and thickness of the metal-layers. The oxidation products were also influenced by metal-layer thickness. Oxide scales of the 35 {mu}m thick metal-layer microlaminate (A) consisted mainly of {alpha}-Al{sub 2}O{sub 3} and {theta}-Al{sub 2}O{sub 3}, while the oxidation products of the 14 {mu}m thick metal-layer microlaminate (B) were the mixture of {alpha}-Al{sub 2}O{sub 3}, {theta}-Al{sub 2}O{sub 3} and Cr{sub 2}O{sub 3}. It was also found that the growth of the oxide scale adjacent to the top YSZ layer was controlled by the oxygen diffusion, and that the growth of the oxide scale adjacent to the internal YSZ layer was controlled by the metal ionic diffusion. - Highlights: {yields} Effect of laminate structure on oxidation behavior of microlaminates was studied. {yields} Oxygen diffusion through YSZ layers led to the oxidation of internal metal-layers. {yields} The thinner NiCoCrAl layer was more difficult to form the stable Al{sub 2}O{sub 3} scale. {yields} Control of oxide scale growth by the oxygen diffusion in the outer metal-layers. {yields} Control of oxide scale growth by the metal ionic diffusion in internal metal-layers.

36 MATERIALS SCIENCE↗

Thermal evolution behavior of carbides and {gamma} Prime precipitates in FGH96 superalloy powder

The characteristics of rapidly solidified FGH96 superalloy powder and the thermal evolution behavior of carbides and {gamma} Prime precipitates within powder particles were investigated. It was observed that the reduction of powder size and the increase of cooling rate had transformed the solidification morphologies of atomized powder from dendrite in major to cellular structure. The secondary dendritic spacing was measured to be 1.02-2.55 {mu}m and the corresponding cooling rates were estimated to be in the range of 1.4 Multiplication-Sign 10{sup 4}-4.7 Multiplication-Sign 10{sup 5} K{center_dot}s{sup -1}. An increase in the annealing temperature had rendered the phase transformation of carbides evolving from non-equilibrium MC Prime carbides to intermediate transition stage of M{sub 23}C{sub 6} carbides, and finally to thermodynamically stable MC carbides. The superfine {gamma} Prime precipitates were formed at the dendritic boundaries of rapidly solidified superalloy powder. The coalescence, growth, and homogenization of {gamma}' precipitates occurred with increasing annealing temperature. With decreasing cooling rate from 650 Degree-Sign C{center_dot}K{sup -1} to 5 Degree-Sign C{center_dot}K{sup -1}, the morphological development of {gamma} Prime precipitates had been shown to proceed from spheroidal to cuboidal and finally to solid state dendrites. Meanwhile, a shift had been observed from dendritic morphology to recrystallized structure between 900 Degree-Sign C and 1050 Degree-Sign C. Moreover, accelerated evolution of carbides and {gamma}' precipitates had been facilitated by the formation of new grain boundaries which provide fast diffusion path for atomic elements. - Highlights: Black-Right-Pointing-Pointer Microstructural characteristic of FGH96 superalloy powder was investigated. Black-Right-Pointing-Pointer The relation between microstructure, particle size, and cooling rate was studied. Black-Right-Pointing-Pointer Thermal evolution behavior of {gamma} Prime and carbides in loose FGH96 powder was studied.

36 MATERIALS SCIENCE↗

Three-dimensional evaluation of the compression and recovery behavior in a flexible graphite sheet by synchrotron radiation microtomography

The compression and unloading behavior of flexible graphite sheets was investigated using synchrotron radiation microtomography with 1 {mu}m voxel size. The recovery ratio of the flexible graphite sheet was measured accurately by in-situ observation. The three-dimensional strain distribution in the interior of the specimen was obtained using the microstructural tracking method. The inner strain distribution with micrometer scale indicated inhomogeneous deformation. The microstructural tracking analysis revealed that deformation units exist in the flexible graphite sheet. The units seem to deform, affecting the neighboring units with each other. The units had a similar size and shape with compacted exfoliated graphite worms that constitute the flexible graphite sheet. Microscopic deformations during compression and unloading are surely affected by the microstructure of the sheet. Highlights: Black-Right-Pointing-Pointer The compression and recovery behavior was investigated using microtomography. Black-Right-Pointing-Pointer The tracking analysis revealed that deformation units exist in the specimen. Black-Right-Pointing-Pointer Each unit deforms in relation to the neighboring unit.

36 MATERIALS SCIENCE↗

Microstructure, strengthening mechanisms and hot deformation behavior of an oxide-dispersion strengthened UFG Al6063 alloy

An ultrafine-grained Al6063/Al{sub 2}O{sub 3} (0.8 vol.%, 25 nm) nanocomposite was prepared via powder metallurgy route through reactive mechanical alloying and hot powder extrusion. Scanning electron microcopy, transmission electron microscopy, and back scattered electron diffraction analysis showed that the grain structure of the nanocomposite is trimodal and composed of nano-size grains (< 0.1 {mu}m), ultrafine grains (0.1-1 {mu}m), and micron-size grains (> 1 {mu}m) with random orientations. Evaluation of the mechanical properties of the nanocomposite based on the strengthening-mechanism models revealed that the yield strength of the ultrafine-grained nanocomposite is mainly controlled by the high-angle grain boundaries rather than nanometric alumina particles. Hot deformation behavior of the material at different temperatures and strain rates was studied by compression test and compared to coarse-grained Al6063 alloy. The activation energy of the hot deformation process for the nanocomposite was determined to be 291 kJ mol{sup -1}, which is about 64% higher than that of the coarse-grained alloy. Detailed microstructural analysis revealed that dynamic recrystallization is responsible for the observed deformation softening in the ultrafine-grained nanocomposite. - Highlights: Black-Right-Pointing-Pointer The strengthening mechanisms of Al6063/Al{sub 2}O{sub 3} nanocomposite were evaluated. Black-Right-Pointing-Pointer Hot deformation behavior of the nanocomposite was studied. Black-Right-Pointing-Pointer The hot deformation activation energy was determined using consecutive models. Black-Right-Pointing-Pointer The restoration mechanisms and microstructural changes are presented.

36 MATERIALS SCIENCE↗

Effect of V and Ta on the precipitation behavior of 12%Cr reduced activation ferrite/martensite steel

12%Cr reduced activation ferrite/martensite steels are promising candidate materials for good corrosion and irradiation resistance used for supercritical water-cooled reactor cladding and in-core components. V and Ta are considered to have improved the creep strength of high Cr steels by precipitating as MX phase. In this paper, a series of trial products microalloyed with V and V–Ta are produced, and the microstructure is characterized after quenching at 1050 °C and tempering at 780 °C by using TEM method to investigate the effect of these elements on the precipitation behavior of 12%Cr reduced activation ferrite/martensite steel. The results from both the experimental observations and thermodynamic and kinetic calculations reveal that V and V–Ta can promote the stable MX precipitation instead of M{sub 2}X, thus increasing the volume fraction of M{sub 23}C{sub 6}. Two-phase separation behavior of the (Ta, V)(C, N) carbonitride into a Ta(V)C(N) phase and a V(Ta)N(C) phase in 12Cr3WVTa steel is observed and further discussed. - Highlights: • Microalloyed with V and V-Ta can promote the precipitation of MX instead of M{sub 2}X. • The presence of delta-ferrite in microstructure affects the morphology of MX. • Two-phase separation of MX carbonitride was observed in 12Cr3WVTa steel.

36 MATERIALS SCIENCE↗

Strengthening behavior of chopped multi-walled carbon nanotube reinforced aluminum matrix composites

Strengthening behavior of the aluminum composites reinforced with chopped multi-walled carbon nanotubes (MWCNTs) or aluminum carbide formed during annealing at 500 °C has been investigated. The composites were fabricated by hot-rolling the powders which were ball-milled under various conditions. During the early annealing process, aluminum atoms can cluster inside the tube due to the diffusional flow of aluminum atoms into the tube, providing an increase of the strength of the composite. Further annealing induces the formation of the aluminum carbide phase, leading to an overall drop in the strength of the composites. While the strength of the composites can be evaluated according to the rule of mixture, a particle spacing effect can be additionally imparted on the strength of the composites reinforced with the chopped MWCNTs or the corresponding carbides since the reinforcing agents are smaller than the submicron matrix grains. - Highlights: • Strengthening behavior of chopped CNT reinforced Al-based composites is investigated. • Chopped CNTs have influenced the strength and microstructures of the composites. • Chopped CNTs are created under Ar- 3% H2 atmosphere during mechanical milling. • Strength can be evaluated by the rule of the mixture and a particle spacing effect.

36 MATERIALS SCIENCE↗