Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Electroluminescence of quantum-dash-based quantum cascade laser structures

We developed two mid-infrared quantum cascade structures based on InAs quantum dashes. The dashes were embedded either in AlInGaAs lattice-matched to InP or in tensile-strained AlInAs. The devices emit between 7 and 11 {mu}m and are a step forward in the development of quantum cascade lasers based on 3-D confined active regions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Excitation Power Dependence Of Photoluminescence From GaAs Quantum Dot Prepared By Droplet Epitaxy Method

GaAs quantum dot (QD) was grown by droplet epitaxy (DE) method and the excitation power dependence of photoluminescence (PL) were carried out. To investigate the effect of annealing temperature on QDs optical properties, the two step RTA process was carried out in a various temperature range from 800 to 1000 deg. C. As the thermal annealing temperature increases, the PL peak position is blue-shifted due to the change of the composition and size distribution of QDs, and the highest PL intensity is observed at the sample annealed at 900 deg. C. The integrated PL intensity (I{sub PL}) is plotted against the excitation density in a log-log scale and the slope was calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Single Material Band Gap Engineering in GaAs Nanowires

The structural and optical properties of GaAs nanowire with mixed zinc-blende/wurtzite structure are presented. High resolution transmission electron microscopy indicates the presence of a variety of shorter and longer segments of zinc-blende or wurtzite crystal phases. Sharp photoluminescence lines are observed with emission energies tuned from 1.515 eV down to 1.43 eV. The downward shift of the emission peaks can be understood by carrier confinement at the wurtzite/zinc-blende heterojunction, in quantum wells and in random short period superlattices existent in these nanowires, assuming the theoretical staggered band-offset between wurtzite and zinc-blende GaAs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron and Hole Spin Relaxation in InAs Quantum Dots and Quasi-2D Structure

Temperature dependence of hole and electron spin relaxation times in both InAs quantum dots (QDs) and quasi-two-dimensional (2D) monolayers has been investigated experimentally using time-resolved photoluminescence (TRPL). The results show that hole spin relaxation time is long enough to be comparable with that of electrons in the quasi-2D InAs structure, but is one order of magnitude smaller than the electron spin relaxation time in QDs structure. It is shown that both hole and electron spin relaxation times decrease monotonically with increasing temperature for InAs QDs, but show non-monotonic temperature-dependent behavior for the quasi-2D structure. Different spin relaxation mechanisms responsible for spin relaxation in the two structures have been discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fano Resonance in GaAs 2D Photonic Crystal Nanocavities

We report the results of polarization resolved reflectivity experiments in GaAs air-bridge photonic crystals with L3 cavities. We show that the fundamental L3 cavity mode changes, in a controlled way, from a Lorentzian symmetrical lineshape to an asymmetrical form when the linear polarization of the incident light is rotated in the plane of the crystal. The different lineshapes are well fitted by the Fano asymmetric equation, implying that a Fano resonance is present in the reflectivity. We use the scattering matrix method to model the Fano interference between a localized discrete state (the cavity fundamental mode) and a background of continuum states (the light reflected from the crystal slab in the vicinity of the cavity) with very good agreement with the experimental data.

36 MATERIALS SCIENCE↗

Spin polarization of a Ferromagnetic Narrow Gap p-(In,Mn)As Obtained from Andreev Reflection Spectroscopy

Spin-polarized carrier transport across Nb/p-(In,Mn)As junctions has been studied. Suppressions of conductance in the superconductor sub-gap region and conductance peaks at the bias voltage around the edge of the sub-gap are observed. These features are well reproduced by a newly modified BTK model including both spin polarization and the inverse proximity effect. The value of spin polarization in p-(In,Mn)As extracted by the calculation is P = 0.725 at 0.5 K with Z = 0.25.

36 MATERIALS SCIENCE↗

Coexistence of type-I and type-II band alignments in antimony-incorporated InAsSb quantum dot nanostructures

Antimony-incorporated InAsSb quantum dots (QDs) are grown by molecular beam epitaxy on GaAs(001) substrates. The QD density increases {approx}7 times while the QD height decreases {approx}50% due to the increase of QD nucleation sites after Sb incorporation into the GaAs buffer layer and into the InAs QDs. These Sb-incorporated InAsSb QDs show red-shift in the photoluminescence (PL) spectrum and large energy separation between confined energy levels. More interestingly, besides the typical type-I QD transition, an additional peak from the recombination at wetting layer interface develops as the excitation laser intensity increases. This peak clearly exhibits type-II characteristics from the measurement of a large blue-shift of the PL peak and a long PL decay time. Finally, the mechanism of the coexistence of type-I and type-II band alignments is discussed.

36 MATERIALS SCIENCE↗

High density InAlAs/GaAlAs quantum dots for non-linear optics in microcavities

Structural and optical properties of InAlAs/GaAlAs quantum dots grown by molecular beam epitaxy are studied using transmission electron microscopy and temperature- and time-resolved photoluminescence. The control of the recombination lifetime (50 ps-1.25 ns) and of the dot density (5.10{sup -8}-2.10{sup 11} cm{sup -3}) strongly suggest that these material systems can find wide applications in opto-electronic devices as focusing non-linear dispersive materials as well as fast saturable absorbers.

36 MATERIALS SCIENCE↗

Faster radial strain relaxation in InAs-GaAs core-shell heterowires

The structure of wurtzite and zinc blende InAs-GaAs (001) core-shell nanowires grown by molecular beam epitaxy on GaAs (001) substrates has been investigated by transmission electron microscopy. Heterowires with InAs core radii exceeding 11 nm, strain relax through the generation of misfit dislocations, given a GaAs shell thickness greater than 2.5 nm. Strain relaxation is larger in radial directions than axial, particularly for shell thicknesses greater than 5.0 nm, consistent with molecular statics calculations that predict a large shear stress concentration at each interface corner.

36 MATERIALS SCIENCE↗

Effect of spacer layer thickness on multi-stacked InGaAs quantum dots grown on GaAs (311)B substrate for application to intermediate band solar cells

We have investigated the properties of multi-stacked layers of self-organized In{sub 0.4}Ga{sub 0.6}As quantum dots (QDs) on GaAs (311)B grown by molecular beam epitaxy. We found that a high degree of in-plane ordering of QDs structure with a six-fold symmetry was maintained though the growth has been performed at a higher growth rate than the conventional conditions. The dependence of photoluminescence characteristics on spacer layer thickness showed an increasing degree of electronic coupling between the stacked QDs for thinner spacer layers. The external quantum efficiency for an InGaAs/GaAs quantum dot solar cell (QDSC) with a thin spacer layer thickness increased in the longer wavelength range due to additive contribution from QD layers inserted in the intrinsic region. Furthermore, a photocurrent production by 2-step photon absorption has been observed at room temperature for the InGaAs/GaAs QDSC with a spacer layer thickness of 15 nm.

36 MATERIALS SCIENCE↗

Realization of high-quality HfO{sub 2} on In{sub 0.53}Ga{sub 0.47}As by in-situ atomic-layer-deposition

High {kappa} dielectric of HfAlO/HfO{sub 2} was an in-situ atomic-layer-deposited directly on molecular beam epitaxy grown In{sub 0.53}Ga{sub 0.47}As surface without using pre-treatments or interfacial passivation layers, where HfAlO (HfO{sub 2}:Al{sub 2}O{sub 3} {approx} 4:1) with high re-crystallization temperature was employed as the top oxide layer. The HfAlO ({approx}4.5 nm)/HfO{sub 2} (0.8 nm)/In{sub 0.53}Ga{sub 0.47}As metal oxide semiconductor capacitors have exhibited an oxide/In{sub 0.53}Ga{sub 0.47}As interface free of arsenic-related defective bonding, thermodynamic stability at 800 deg. C, and low leakage current densities of <10{sup -7} A/cm{sup 2} at {+-}1 MV/cm. The interfacial trap density (D{sub it}) spectra in absence of mid-gap peaks were obtained by temperature-dependent capacitance and conductance with D{sub it}'s of 2-3 x 10{sup 12} eV{sup -1} cm{sup -2} below and 6-12 x 10{sup 11} eV{sup -1} cm{sup -2} above the mid-gap of In{sub 0.53}Ga{sub 0.47}As, respectively. An equivalent oxide thickness of less than 1 nm has been achieved by reducing the HfAlO thickness to {approx}2.7 nm with the same initial HfO{sub 2} thickness of {approx}0.8 nm.

36 MATERIALS SCIENCE↗

Measurement and simulation of anisotropic magnetoresistance in single GaAs/MnAs core/shell nanowires

We report four probe measurements of the low field magnetoresistance (MR) in single core/shell GaAs/MnAs nanowires (NWs) synthesized by molecular beam epitaxy, demonstrating clear signatures of anisotropic magnetoresistance that track the field-dependent magnetization. A comparison with micromagnetic simulations reveals that the principal characteristics of the magnetoresistance data can be unambiguously attributed to the nanowire segments with a zinc blende GaAs core. The direct correlation between magnetoresistance, magnetization, and crystal structure provides a powerful means of characterizing individual hybrid ferromagnet/semiconductor nanostructures.

36 MATERIALS SCIENCE↗

Thermoelectric properties of epitaxial TbAs:InGaAs nanocomposites

InGaAs lattice-matched to InP was grown by molecular beam epitaxy with randomly distributed TbAs nanoparticles for thermoelectric power generation applications. TbAs:InGaAs is expected to have a large thermoelectric figure of merit, ZT, particularly at high temperatures, owing to energy band alignment between the nanoparticles and their surrounding matrix. Here, the room temperature thermoelectric properties were measured as a function of TbAs concentration, revealing a maximum thermoelectric power factor of 2.38 W/mK{sup 2} and ZT of 0.19 with 0.2% TbAs. Trends in the thermoelectric properties closely resemble those found in comparable ErAs:InGaAs nanocomposite materials. However, nanoparticles were not observed by scanning transmission electron microscopy in the highest ZT TbAs:InGaAs sample, unlike the highest ZT ErAs:InGaAs sample (0.2% ErAs) and two higher concentration TbAs:InGaAs samples examined. Consistent with expectations concerning the positioning of the Fermi level in these materials, ZT was enhanced by TbAs incorporation largely due to a high Seebeck coefficient, whereas ErAs provided InGaAs with higher conductivity but a lower Seebeck coefficient than that of TbAs:InGaAs. Thermal conductivity was reduced significantly from that of intrinsic thin-film InGaAs only with TbAs concentrations greater than {approx}1.7%.

36 MATERIALS SCIENCE↗

Conductivity and structure of ErAs nanoparticles embedded in GaAs pn junctions analyzed via conductive atomic force microscopy

We have used conductive atomic force microscopy to investigate the influence of growth temperature on local current flow in GaAs pn junctions with embedded ErAs nanoparticles grown by molecular beam epitaxy. Three sets of samples, one with 1 ML ErAs deposited at different growth temperatures and two grown at 530 deg. C and 575 deg. C with varying ErAs depositions, were characterized. Statistical analysis of local current images suggests that the structures grown at 575 deg. C have about 3 times thicker ErAs nanoparticles than structures grown at 530 deg. C, resulting in degradation of conductivity due to reduced ErAs coverage. These findings explain previous studies of macroscopic tunnel junctions.

36 MATERIALS SCIENCE↗

High compositional homogeneity in In-rich InGaAs nanowire arrays on nanoimprinted SiO{sub 2}/Si (111)

We report improved homogeneity control of composition-tuned In{sub 1-x}Ga{sub x}As (x < 0.4) nanowire (NW) arrays grown by catalyst-free molecular beam epitaxy (MBE) on nanoimprinted SiO{sub 2}/Si (111) substrates. Using very high As/(Ga+In) ratios at growth temperatures of 550 Degree-Sign C enabled uniform incorporation of the respective group-III elements (In,Ga) over the investigated composition range, confirmed by high-resolution x-ray diffraction (HRXRD) and energy dispersive x-ray spectroscopy. Low-temperature (20 K) photoluminescence of these In-rich In{sub 1-x}Ga{sub x}As NW ensembles reveal state-of-the-art linewidths of {approx}29-33 meV. These are independent of Ga content, suggesting an overall low degree of phase separation. In contrast, self-assembled, non-periodic In{sub 1-x}Ga{sub x}As NW arrays show larger inhomogeneity with increased peakwidths in 2{theta}-{omega} HRXRD scans as well as broadened Raman modes. These results demonstrate the excellent potential of site-selective MBE growth of high-periodicity non-tapered In{sub 1-x}Ga{sub x}As NW arrays with low size and composition dispersion for optimized device integration on Si.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Correlation between Ga-O signature and midgap states at the Al{sub 2}O{sub 3}/In{sub 0.53}Ga{sub 0.47}As interface

Al{sub 2}O{sub 3}/In{sub 0.53}Ga{sub 0.47}As gate stacks were fabricated using different concentrations of NH{sub 4}OH as a pre-deposition treatment. Increased NH{sub 4}OH concentrations significantly reduced the C-V weak inversion hump and the measured near midgap interface states density (D{sub it}). X-ray photoelectron spectroscopy (XPS) studies revealed that these changes in the electrical properties were accompanied by a reduction in the amount of the Ga-O bonding while As-As dimers as well as other XPS detected InGaAs surface species did not correlate with the observed D{sub it} trend. Possible explanations for these findings are suggested.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, morphological, and magnetic characterization of In{sub 1-x}Mn{sub x}As quantum dots grown by molecular beam epitaxy

In this paper, we present a method to order low temperature (LT) self-assembled ferromagnetic In{sub 1-x}Mn{sub x}As quantum dots (QDs) grown by molecular beam epitaxy (MBE). The ordered In{sub 1-x}Mn{sub x}As QDs were grown on top of a non-magnetic In{sub 0.4}Ga{sub 0.6}As/GaAs(100) QDs multi-layered structure. The modulation of the chemical potential, due to the stacking, provides a nucleation center for the LT In{sub 1-x}Mn{sub x}As QDs. For particular conditions, such as surface morphology and growth conditions, the In{sub 1-x}Mn{sub x}As QDs align along lines like chains. This work also reports the characterization of QDs grown on plain GaAs(100) substrates, as well as of the ordered structures, as function of Mn content and growth temperature. The substitutional Mn incorporation in the InAs lattice and the conditions for obtaining coherent and incoherent structures are discussed from comparison between Raman spectroscopy and x-ray analysis. Ferromagnetic behavior was observed for all structures at 2 K. We found that the magnetic moment axis changes from [110] in In{sub 1-x}Mn{sub x}As over GaAs to [1-10] for the ordered In{sub 1-x}Mn{sub x}As grown over GaAs template.

77 NANOSCIENCE AND NANOTECHNOLOGY↗