Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “user study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Redesigning rain gauges network in Johor using geostatistics and simulated annealing

Recently, many rainfall network design techniques have been developed, discussed and compared by many researchers. Present day hydrological studies require higher levels of accuracy from collected data. In numerous basins, the rain gauge stations are located without clear scientific understanding. In this study, an attempt is made to redesign rain gauge network for Johor, Malaysia in order to meet the required level of accuracy preset by rainfall data users. The existing network of 84 rain gauges in Johor is optimized and redesigned into a new locations by using rainfall, humidity, solar radiation, temperature and wind speed data collected during the monsoon season (November - February) of 1975 until 2008. This study used the combination of geostatistics method (variance-reduction method) and simulated annealing as the algorithm of optimization during the redesigned proses. The result shows that the new rain gauge location provides minimum value of estimated variance. This shows that the combination of geostatistics method (variance-reduction method) and simulated annealing is successful in the development of the new optimum rain gauge system.

54 ENVIRONMENTAL SCIENCES↗

Optimal Coordination of Electric Vehicles for Grid Services using Deep Reinforcement Learning

Recent research has shown the effectiveness of reinforcement learning (RL) in coordinating electric vehicles (EVs) with vehicle-to-grid capabilities for grid services. However, many of these studies rely on lookup table and deep Q-network techniques, which can be impractical when dealing with continuous states and actions. In addition, existing RL designs inadequately account for battery aging effects, EV user satisfaction, uncertain departure and arrival time, and trip distance, which may compromise effective coordination. This paper aims to bridge these gaps by developing an innovative deep deterministic policy gradient-based RL framework for optimal coordination of EVs. Case studies were carried out using a test system with 100 EVs, and numerical analysis results showed that the proposed RL framework can effectively coordinate EVs to maximize economic benefits and user satisfaction while ensuring the expected battery lifespan.

Das, Avijit↗

Opportunities with NSUF for Nuclear Energy R&D

The Nuclear Science User Facilities (NSUF) is one of a diverse number of U.S. Department of Energy (DOE) user facilities established to provide researchers with the most advanced tools of modern science. The idea of a user facility has been around since the Manhattan Project, when the first of the large government-owned R&D facilities was built. Currently there are over 50 such facilities in the US, but only one devoted to nuclear energy R&D. The NSUF was established in 2007 to open INL capabilities to outside users through a competitive process. The intent was to provide access to these capabilities to a broader range of researchers that represented significant intellectual capital. The combined nuclear energy community would then be able to address the important issues relevant to the mission of the DOE-NE with respect to irradiation effects in nuclear fuels and materials. The NSUF is fairly unique in that it is no longer composed of a single self-contained facility but represents a consortium of facilities distributed across the U.S. at a number of institutions. The NSUF is centered at and managed from the Idaho National Laboratory (INL), where it was originally founded, but it also coordinates activities at more than twelve NSUF partner facilities that include eight universities, plus the three Idaho universities that are part of the Center for Advanced Energy Studies (CAES), four national laboratories, and one nuclear industry vendor. The NSUF goal is to produce the highest quality research results to increase understanding of advanced nuclear energy technologies important to DOE-NE and support national priorities by adapting to the needs of DOE-NE programs, industry, and new innovative concepts.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Bundle Data Approach at GES DISC Targeting Natural Hazards

Severe natural phenomena such as hurricane, volcano, blizzard, flood and drought have the potential to cause immeasurable property damages, great socioeconomic impact, and tragic loss of human life. From searching to assessing the Big, i.e., massive and heterogeneous scientific data (particularly, satellite and model products) in order to investigate those natural hazards, it has, however, become a daunting task for Earth scientists and applications researchers, especially during recent decades. The NASA Goddard Earth Sciences Data and Information Service Center (GES DISC) has served Big Earth science data, and the pertinent valuable information and services to the aforementioned users of diverse communities for years. In order to help and guide our users to online readily (i.e., with a minimum effort) acquire their requested data from our enormous resource at GES DISC for studying their targeted hazard event, we have thus initiated a Bundle Data approach in 2014, first targeting the hurricane event topic. We have recently worked on new topics such as volcano and blizzard. The bundle data of a specific hazard event is basically a sophisticated integrated data package consisting of a series of proper datasets containing a group of relevant (knowledge--based) data variables readily accessible to users via a system-prearranged table linking those data variables to the proper datasets (URLs). This online approach has been developed by utilizing a few existing data services such as Mirador as search engine; Giovanni for visualization; and OPeNDAP for data access, etc. The online Data Cookbook site at GES DISC is the current host for the bundle data. We are now also planning on developing an Automated Virtual Collection Framework that shall eventually accommodate the bundle data, as well as further improve our management in Big Data.

GES DISC↗

Known unknowns: indirect energy effects of information and communication technology

There has been sustained and growing interest in characterizing the net energy impact of information and communication technology (ICT), which results from indirect effects offsetting (or amplifying) the energy directly consumed by ICT equipment. These indirect effects may be either positive or negative, and there is considerable disagreement as to the direction of this sign as well as the effect magnitude. Literature in this area ranges from studies focused on a single service (such as e-commerce versus traditional retail) to macroeconomic studies attempting to characterize the overall impact of ICT. Methods. We review the literature on the indirect energy effect of ICT found via Google Scholar, our own research, and input from other researchers in the field. The various studies are linked to an effect taxonomy, which is synthesized from several different hierarchies present in the literature. References are further grouped according to ICT service (e.g., e-commerce, telework) and summarized by scope, method, and quantitative and qualitative findings. Review results. Uncertainty persists in understanding the net energy effects of ICT. Results of indirect energy effect studies are highly sensitive to scoping decisions and assumptions made by the analyst. Uncertainty increases as the impact scope broadens, due to complex and interconnected effects. However, there is general agreement that ICT has large energy savings potential, but that the realization of this potential is highly dependent on deployment details and user behavior. Discussion. While the overall net effect of ICT is likely to remain unknown, this review suggests several guidelines for improving research quality in this area, including increased data collection, enhancing traditional modeling studies with sensitivity analysis, greater care in scoping, less confidence in characterizing aggregate impacts, more effort on understanding user behavior, and more contextual integration across the different levels of the effect taxonomy.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

An Innovative Tool for Intraoperative Electron Beam Radiotherapy Simulation and Planning: Description and Initial Evaluation by Radiation Oncologists

Purpose: Intraoperative electron beam radiation therapy (IOERT) involves a modified strategy of conventional radiation therapy and surgery. The lack of specific planning tools limits the spread of this technique. The purpose of the present study is to describe a new simulation and planning tool and its initial evaluation by clinical users. Methods and Materials: The tool works on a preoperative computed tomography scan. A physician contours regions to be treated and protected and simulates applicator positioning, calculating isodoses and the corresponding dose-volume histograms depending on the selected electron energy. Three radiation oncologists evaluated data from 15 IOERT patients, including different tumor locations. Segmentation masks, applicator positions, and treatment parameters were compared. Results: High parameter agreement was found in the following cases: three breast and three rectal cancer, retroperitoneal sarcoma, and rectal and ovary monotopic recurrences. All radiation oncologists performed similar segmentations of tumors and high-risk areas. The average applicator position difference was 1.2 {+-} 0.95 cm. The remaining cancer sites showed higher deviations because of differences in the criteria for segmenting high-risk areas (one rectal, one pancreas) and different surgical access simulated (two rectal, one Ewing sarcoma). Conclusions: The results show that this new tool can be used to simulate IOERT cases involving different anatomic locations, and that preplanning has to be carried out with specialized surgical input.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Structural and Spectroscopic Characterization of 17- and 18-Electron Piano-Stool Complexes of Chromium. Thermochemical Analyses of Weak Cr–H Bonds

The 17-electron radical CpCr(CO)2(IMe)• (IMe = 1,3-dimethylimidazol-2-ylidene) was synthesized by the reaction of IMe with [CpCr(CO)3]2, and characterized by single crystal X-ray diffraction and by EPR, IR and variable temperature 1H NMR spectroscopy. The metal-centered radical is monomeric under all conditions and exhibits Curie paramagnetic behavior in solution. An electrochemically reversible reduction to 18-electron CpCr(CO)2(IMe)- takes place at E½ = -1.89(1) V vs Cp2Fe+•/0 in MeCN, and was accomplished chemically with KC8 in THF. The salts K+(18-crown-6)[CpCr(CO)2(IMe)]- • ½THF and K+[CpCr(CO)2(IMe)]- • ¾THF were crystallographically characterized. Monomeric ion pairs are found in the former, whereas the latter has a polymeric structure due to a network of K∙∙∙O(CO) interactions. Protonation of K+(18-crown-6)[CpCr(CO)2(IMe)]- • ½THF gives the hydride CpCr(CO)2(IMe)H, which could not be isolated, but was characterized in solution; a pKa of 27.2(4) was determined in MeCN. A thermochemical analysis provides the Cr-H bond dissociation free energy (BDFE) for CpCr(CO)2(IMe)H in MeCN solution as 47.3(6) kcal mol-1. This value is exceptionally low for a transition metal hydride, and implies that the reaction 2 [Cr-H] → 2 [Cr•] + H2 is exergonic (ΔG = -9.0(8) kcal mol-1). This analysis explains the experimental observation that generated solutions of the hydride produce CpCr(CO)2(IMe)• (typically on the timescale of days). By contrast, CpCr(CO)2(PCy3)H has a higher Cr-H BDFE (52.9(4) kcal mol-1), is more stable with respect to H2 loss, and is isolable. We thank the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences and Biosciences for support. M.L.H. carried out the crystallographic studies and was supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences. The EPR studies were performed at the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research located at PNNL. Pacific Northwest National Laboratory is a multiprogram national laboratory operated by Battelle for the U.S. Department of Energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High pressure neutron diffraction on WAND 2 with a Paris-Edinburgh press

The Paris-Edinburgh press is a widely available, highly adaptable pressure cell commonly used while collecting neutron scattering data. Here, we detail the use of the VX3 and VX5 Paris-Edinburgh presses on the Wide-Angle Neutron Diffractometer (WAND 2 ) at the High Flux Isotope Reactor at Oak Ridge National Laboratory. We first give a detailed overview of the instrument setup and alignment capabilities used at WAND 2 . We then demonstrate the high pressure capabilities through three examples. In this work, the first example focuses on diffraction data obtained from a lithium-diamond mixture to 10 GPa with the use of single toroidal cubic boron nitride anvils. Other examples include the room temperature compressions of germanium (up to 16 GPa) and the mineral malachite with double toroidal sintered diamond anvils. This work thereby represents the first studies above 10 GPa at the High Flux Isotope Reactor and opens the door for future user experiments at these elevated pressures.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Extracting differential pair distribution functions using MIXSCAT

Differently weighted experimental scattering data have been used to extract partial or differential structure factors or pair distribution functions in studying many materials. However, this is not done routinely partly because of the lack of user-friendly software. This paper presents MIXSCAT, a new member of the DISCUS program package. MIXSCAT allows one to combine neutron and X-ray pair distribution functions and extract their respective differential functions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Yet Another Hauser-Feshbach Code

Code framework to perform simulations of nuclear reactions with incident particles including gammas, protons, neutrons, deuterons, tritons, helium-3, and alphas to develop nuclear data libraries and study nuclear reaction phenomona. The code can model nuclear reactions or initial populations specified by the user. The decays principally follow the compound-nucleus hypothesis and the statistical decay of Hauser and Feshbach. The code models nuclear decays with a Monte Carlo process that tracks the decay of each state. Data libraries are produced that can be translated into GNDS (generalized Nuclear Data Structure). YAHFC can also be used as an event generator, with individual decays written to disk for offline analysis. Both serial and MPI versions are provided. YAHFC does NOT perform transport of nuclear reactions through materials, only the primary reaction with a target material.

Ormand, WilliamE.↗

mosartwmpy: A Python implementation of the MOSART-WM coupled hydrologic routing and water management model

mosartwmpy is a Python implementation of the Model for Scale Adaptive River Transport with Water Management (MOSART-WM). This new version retains the functionality of the legacy model (written in FORTRAN) while providing new features to enhance user experience and extensibility. MOSART is a large-scale river-routing model used to study riverine dynamics of water, energy, and biogeochemistry cycles across local, regional, and global scales (Li et al., 2013). The WM component introduced by Voisin et al. (2013) represents river regulation through reservoir storage and release operations, diversions from reservoir releases, and allocation to sectoral water demands. Each reservoir release is independently calibrated using long-term mean monthly inflow into the reservoir, long-term mean monthly demand associated with this reservoir, and reservoir goals (flood control, irrigation, recreation, etc.). Generic monthly pre-release rules and storage targets are set up for individual reservoirs; however, those releases are updated annually for inter-annual variability (dry or wet year) and daily for environmental constraints such as flow minimum release and minimum/maximum storage levels. The WM model allows an evaluation of the impact of water management over multiple river basins at once (global, continental scales) and with consistent representation of human operations over the full domain.

97 MATHEMATICS AND COMPUTING↗

AOT & LANSCE Focus: Proton Radiography Facility

Invented at Los Alamos National Laboratory, proton radiography (pRad) at the Los Alamos Neutron Science Center (LANSCE) employs a high-energy proton beam to image the properties and behavior of materials under a variety of conditions. The penetrating power of high-energy protons, like that of x-rays, makes them an excellent probe of a wide range of materials under extreme pressures, strains, and strain rates. The invention of proton radiography is the direct result of the synergy between the Laboratory’s defense mission and basic science research scientists and supports the Laboratory’s national security science mission as well as provides for fundamental science discoveries. This new capability has revolutionized dynamic materials science at Los Alamos, providing a new window for the study of shock physics, materials damage, and high explosives science. The Proton Radiograpy Facility, a national user facility, has performed more than 500 dynamic experiments in support of the Weapons program, Global Security, and other customers since it was commissioned more than a decade ago. This information helps Los Alamos maintain the reliability of the U.S. nuclear stockpile. The pRad capability is primarily supported by the NNSA Science Campaigns.

36 MATERIALS SCIENCE↗

EISA 432 Energy Audits Best Practices: Software Tools

Five whole building analysis software tools that can aid an energy manager with fulfilling energy audit and commissioning/retro-commissioning requirements were selected for review in this best practices study. A description of each software tool is provided as well as a discussion of the user interface and level of expertise required for each tool, a review of how to use the tool for analyzing energy conservation opportunities, the format and content of reports generated by the tool, and a discussion on the applicability of the tool for commissioning.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Modeling the U.S. Western Electric Interconnection to Understand the Consequences of Hydrometeorological Extremes and Options for Risk Mitigation

Electricity grid operators around the world face a dual challenge; withstanding increasingly severe weather and the longer term impacts of climate change, while simultaneously decarbonizing. Extreme weather events such as heat waves and droughts are rising in both severity and frequency, which is threatening the reliability of electricity grids through increased demand, generation capacity losses, and equipment failures. Consequently, incorporating hydrometeorological stressors into computational power systems analysis is becoming an even more critical tool in long term planning and short term operations. However, there is a general lack of open-source customizable grid simulation software capable of exhaustively stress testing the grid under hydrometeorological uncertainty, and/or examining potential risk mitigation pathways. A related, persistent challenge for power system modelers is striking an appropriate balance between model fidelity (e.g. spatial scale and time resolution) and computational tractability (wall clock run-time). In this study, we are proposing a solution to this problem with open-source software that allows users to seamlessly customize the scale and track the accuracy of grid operations models. Our approach allows users to search over numerous model parameters (network topology, mathematical formulation, economic hurdle rates, and transmission line scaling) to identify model instantiations that accommodate experimental design. Further, we use this approach to demonstrate the importance of including extreme weather events in model validation and model selection. Focusing on the occurrence of heatwaves and droughts in the U.S. Western Interconnection, we examine role of extreme events in balancing tradeoffs between model fidelity and run-time at the model design stage.

Economics↗

Photovoltaic remote instrument applications: Assessment of the near-term market

A preliminary assessment of the near term market for photovoltaic remote instrument applications is presented. Among the potential users, two market sectors are considered: government and private. However, the majority of the remote systems studied are operated by or for the federal, state, or local governments. Environmental monitoring and surveillance remote instrument systems are discussed. Based on information obtained in this preliminary market survey, a domestic, civilian market of at least 1.3 MW sub pk is forecast for remote instrument systems. This estimate is exclusive of several potentially large scale markets for remote instruments which are identified but for which no hard data is available.

Rosenblum, L.↗

Operation of a single-channel, sequential Navstar GPS receiver in a helicopter mission environment

It is pointed out that the future utilization of the Navstar Global Positioning System (GPS) by civil helicopters will provide an enhanced performance not obtainable with current navigations systems. GPS will supply properly equipped users with extremely accurate three-dimensional position and velocity information anywhere in the world. Preliminary studies have been conducted to investigate differential GPS concept mechanizations and cost, and to theoretically predict navigation performance and the impact of degradation of the GPS C/A code for national security considerations. The obtained results are encouraging, but certain improvements are needed. As a second step in the program, a single-channel sequential GPS navigator was installed and operated in the NASA SH-3G helicopter. A series of flight tests were conducted. It is found that performance of the Navstar GPS Z-set is quite acceptable to support area navigation and nonprecision approach operations.

Edwards, F. G.↗

SPAR improved structural-fluid dynamic analysis capability

The results of a study whose objective was to improve the operation of the SPAR computer code by improving efficiency, user features, and documentation is presented. Additional capability was added to the SPAR arithmetic utility system, including trigonometric functions, numerical integration, interpolation, and matrix combinations. Improvements were made in the EIG processor. A processor was created to compute and store principal stresses in table-format data sets. An additional capability was developed and incorporated into the plot processor which permits plotting directly from table-format data sets. Documentation of all these features is provided in the form of updates to the SPAR users manual.

Pearson, M. L.↗

A Meteorological (humidity, temperature, aerosols)) mobile dial system: Concepts and design

Since 1982 a program was conducted to develop a mobile meteorological (humidity, temperature, aerosols) Differential Absorption Lidar (DIAL) devoted to the studies of the nuclear power plant atmospheric surroundings. The measurement objectives are defined according to the user needs and the lidar feasibility. The concepts and design adopted to meet both the requirement and the measurement objectives are described. Each sub-system is addressed sequentially: transmitting system, receiving system, detection system, and post detection.

Cahen, C.↗