Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “temperature effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Nonlinear generation of whistler waves by an ion beam

An electromagnetic hybrid code is used to simulate a new mechanism for whistler wave generation by an ion beam. First, a field-aligned ion beam becomes unstable to the electromagnetic ion/ion right-hand resonant instability which generates large amplitude MHD-like waves. These waves then trap the ion beam and increase its effective temperature anisotropy. As a result, the growth rates of the electron/whistler instability are significantly enhanced, and whistlers start to grow above the noise level. At the same time, because of the reduced parallel drift speed of the ion beam, the frequencies of the whistlers are also downshifted. Full simulations were performed to isolate and separately investigate the electron/ion whistler instability. The results are in agreement with the assumption of fluid electrons in the hybrid simulations and with the linear theory of the instability.

Akimoto, K.↗

Model atmosphere analysis of the DZ white dwarf K789 - 37

This paper presents new observations and an analysis using model atmosphere techniques of the recently discovered DZA white dwarf K789 - 37. The effective temperature derived is 9500 + or - 500 K. Abundances are determined for the elements hydrogen, magnesium, calcium, and iron, as well as upper limits for carbon and silicon. The abundances are very low compared to solar values and within the range typical for this spectral class. The implications of the results for the currently accepted explanation of trace elements in cool white dwarfs in terms of the diffusion/accretion scenario are discussed. It is concluded that the accreted matter cannot have had solar composition.

Koester, D.↗

Far ultraviolet observations of hot DA white dwarfs

Far ultraviolet (FUV) fluxes have been used for determining the effective temperatures of a number of DA white dwarfs hotter than 20,000 K. The analysis consisted of comparing the observed FUV fluxes with model fluxes scaled to the V-band flux. After suitable corrections were performed for the time-dependent sensitivity degradation of the IUE, it was found that the available flux calibrations for the IUE were insufficiently accurate for precise temperature determinations. Accordingly, seven white dwarfs for which accurate, independent temperature determinations were made from line profile analyses were used to improve the accuracy of the IUE flux calibration. The correction to the original calibration was as great as 20 percent in individual 5-A wavelength bins, while the average over the IUE wavelength range was 5 percent. Both the IUE flux correction and the temperatures obtained for the hot white dwarfs are presented.

Finley, David↗

The evolutionary sequence of planetary nebulae

A first-order solution to the problem of nebular evolution is presented and used to construct photoionization models with the correct ionized gas geometry with respect to the central star. The models are used to investigate the evolution of the central star in terms of a 'transformed' H-R diagram in which H-beta luminosity replaces stellar luminosity and the nebular excitation class takes the place of stellar effective temperature. It is shown that the optically thick PN in the Magellanic Clouds behave as ram-pressure confined H II regions trapped between the shocked remnants of AGB wind and the high-velocity stellar wind of the PN nuclei.

Dopita, M. A.↗

Observations of G29 - 38 at 10 microns

The white dwarf G29 - 38 was shown by Zuckerman and Becklin (1987) to have an IR excess at 1-5 microns, possibly due to a spatially unresolved brown dwarf companion. Using the NASA-MSFC 20-pixel bolometer array at the IRTF, a 10.8-micron flux density of 9.5 + or - 3.1 mJy is detected from G29 - 38. This value, combined with more recent 10-micron data obtained by others, implies that 10-micron emission from G29 - 38 is at least twice that expected from a brown dwarf having an effective temperature in the range 1100-1500 K, as previously estimated. The possibility that the IR excess is emitted by dust rather than a brown dwarf is therefore strengthened.

Telesco, C. M.↗

The excitation of 12 micron emission from very small particles

The results of IRAS observations of visual reflection nebulae illuminated by stars with effective temperatures between 3000 and 33,000 K are presented. The ratio of the energy radiated in the IRAS 12-microns band to the total energy radiated at far-infrared wavelengths (60 and 100 microns) is about 0.2, with little or no dependence on the temperature of the illuminating star for stellar temperatures between about 5000 and 33,000 K. This is interpreted as requiring that visual photons as well as ultraviolet photons are capable of exciting 12-microns emission from very small particles.

Sellgren, K.↗

Propagation and absorption of electron-cyclotron maser radiation during solar flares

The propagation and absorption of the maser radiation during solar flares are examined through linear theory and electromagnetic particle simulations. It is shown using linear theory that strong absorption of the radiation should occur as it propagates toward the second harmonic layer, where the magnetic field is half as strong as in the emission region. Only radiation propagating nearly parallel to the magnetic field in a low-temperature plasma may be able to escape under certain limited conditions. Finite temperature effects can cause radiation propagating nearly perpendicular to the magnetic field to refract, causing enhanced absorption. Particle simulations are then used to evaluate the nonlinear response of the plasma as the maser radiation propagates through the absorption layer. It is shown that some of the maser radiation is able to escape through a process of absorption below the second harmonic of the local gyrofrequency and re-emission above it. The fraction able to escape is much higher than that predicted by linear theory, although the amount of escaping energy is only a small fraction of the incident energy.

Mckean, M. E.↗

Zonally averaged thermal balance and stability models for nitrogen polar caps on Triton

Voyager four-color imaging data of Triton are analyzed to calculate the bolometric hemispheric albedo as a function of latitude and longitude. Zonal averages of these data have been incorporated into a thermal balance model involving insolation, reradiation, and latent heat of sublimation of N2 ice for the surface. The current average bolometric albedo of Triton's polar caps is 0.8, implying an effective temperature of 34.2 K and a surface pressure of N2 of 1.6 microbar for unit emissivity. This pressure is an order of magnitude lower than the surface pressure of 18 microbar inferred from Voyager data (Broadfoot et al., 1989; Conrath et al., 1989), a discrepancy that can be reconciled if the emissivity of the N2 on Triton's surface is 0.66. The model predicts that Triton's surface north of 15 deg N latitude is experiencing deposition of N2 frosts, as are the bright portions of the south polar cap near the equator. This result explains why the south cap covers nearly the entire southern hemisphere of Triton.

Stansberry, John A.↗

On the Variability of the Solar Integral Radiation Constituents

The results of spectral analysis of series of observations of the equatorial and polar diameters, as well as of series of satellite observations of the S sub O variations during 1975 to 1987 presented in papers by Laclare (1987), Delache (1988) and Delache et al. (1988) confirm with confidence the presence of an 11-year modulation in the Sun's radiation and diameter, and consequently, in the effective temperature of the photosphere. The same conclusion has been drawn with regard to the 1000th and 320th daily periodicities. In combination with the results of other research, several obvious conclusions can be drawn from the data presented. The 76-year variation in the period from 1967 to 1987 is not revealed in the data of observations; the data of the middle series will doubtless be made more precise after the facsimile from the initial information is obtained. The basic and comparable contributions to the radius variability yield the 11- and 22-year variations. The presence can easily be seen of harmonics with periods of 2 and 4 years; the 4-year period is revealed up to 1979 only, and the 2-year one, after 1980 only. This is possibly due to the combined contribution of the 11- and 22-year variations (to be more precise, 10.8 and 21.2 years) forming a certain mean 16-year periodicity. In this case, the 4- and 2-year variations can be regarded as the 4th and 8th harmonics of such a mean variation. Measurements of the horizontal diameter made at Greenwich Observatory have not lost their significance for the analysis of phenomena on the Sun, since they contain data having precision characteristics conforming to the level of the latest ground-based diameter measurements.

Nikolsky, G. A.↗

Infrared emission from ultracompact H II regions

Models of circumstellar dust shells around ultracompact (UC) H II regions were constructed that accurately fit the observed IR flux distributions. The models assume spherically symmetric dust shells illuminated by stars whose bolometric luminosity is inferred from the integrated FIR flux densities. Assuming ionization by a single zero age main sequence (ZAMS) star, the relations of Panagia were used to infer the stellar radius and effective temperature for a given luminosity. The grain mixture in the dust shell consists of bare graphite and silicate grains with the optical properties of Draine and Lee and the size distribution of Mathis et al. The computer code of Wolfire et al was used to solve the radiative transfer equations through a spherical dust shell. The model provides monochromatic luminosities, dust temperatures, and opacities through the shell. Aside from the stellar and dust properties, the only other input parameters to the model are the distance to the shell, the form of its density distribution, and its outer radius. Predictions of the model are compared with observations of a typical UC H II region and the run of dust temperature with radius and the optical depth with frequency are discussed.

Churchwell, ED↗

Infrared studies of dust grains in infrared reflection nebulae

IR reflection nebulae, regions of dust which are illuminated by nearby embedded sources, were observed in several regions of ongoing star formation. Near IR observation and theoretical modelling of the scattered light form IR reflection nebulae can provide information about the dust grain properties in star forming regions. IR reflection nebulae were modelled as plane parallel slabs assuming isotropically scattering grains. For the grain scattering properties, graphite and silicate grains were used with a power law grain size distribution. Among the free parameters of the model are the stellar luminosity and effective temperature, the optical depth of the nebula, and the extinction by foreground material. The typical results from this model are presented and discussed.

Pendleton, Yvonne J.↗

Current collection in an anisotropic plasma

A general method is given to derive the current-potential relations in anisotropic plasmas. Orbit limit current is assumed. The collector is a conductive sphere or an infinite cylinder. Any distribution which is an arbitrary function of the velocity vector can be considered as a superposition of many mono-energetic beams whose current-potential relations are known. The results for two typical pitch angle distributions are derived and discussed in detail. The general properties of the current potential relations are very similar to that of a Maxwellian plasma except for an effective temperature which varies with the angle between the magnetic field and the charging surface. The conclusions are meaningful to generalized geometries.

Li, Wei-Wei↗

CETA truck and EVA restraint system

The Crew Equipment Translation Aid (CETA) experiment is an extravehicular activity (EVA) Space Transportation System (STS) based flight experiment which will explore various modes of transporting astronauts and light equipment for Space Station Freedom (SSF). The basic elements of CETA are: (1) two 25 foot long sections of monorail, which will be EVA assembled in the STS cargo bay to become a single 50 ft. rail called the track; (2) a wheeled baseplate called the truck which rolls along the track and can accept three cart concepts; and (3) the three carts which are designated manual, electric, and mechanical. The three carts serve as the astronaut restraint and locomotive interfaces with the track. The manual cart is powered by the astronaut grasping the track's handrail and pulling himself along. The electric cart is operated by an astronaut turning a generator which powers the electric motor and drives the cart. The mechanical cart is driven by a Bendix type transmission and is similar in concept to a man-propelled railroad cart. During launch and landing, the truck is attached to the deployable track by means of EVA removable restraint bolts and held in position by a system of retractable shims. These shims are positioned on the exterior of the rail for launch and landing and rotate out of the way for the duration of the experiment. The shims are held in position by strips of Velcro nap, which rub against the sides of the shim and exert a tailored force. The amount of force required to rotate the shims was a major EVA concern, along with operational repeatability and extreme temperature effects. The restraint system was tested in a thermal-vac and vibration environment and was shown to meet all of the initial design requirements. Using design inputs from the astronauts who will perform the EVA, CETA evolved through an iterative design process and represented a cooperative effort.

Beals, David C.↗

Longitudinal aerodynamic characteristics of a subsonic, energy-efficient transport configuration in the National Transonic Facility

The Reynolds number, aeroelasticity, boundary layer transition, and nonadiabatic wall temperature effects, and data repeatability was determined in the National Transonic Facility (NTF) for a subsonic, energy efficient transport model. The model was tested over a Mach number range of 0.50 to 0.86 and a Reynolds number range of 1.9 million to approximately 23.0 million (based on mean geometric chord). The majority of the data was taken using cryogenic nitrogen (data at 1.9 million Reynolds number was taken in air). Force and moment, wing pressure, and wing thermocouple data are presented. The data indicate that increasing Reynolds number resulted in greater effective camber of the supercritical wing and horizontal tail, resulting in greater lift and pitching moment coefficients at nearly all angles of attack for M = 0.82. As Reynolds number was increased, untrimmed L/D increased, the angle of attack for maximum L/D decreased, drag creep was reduced significantly, and drag divergence Mach number increased slightly. Data repeatability for both modes of operation of the NTF (air and cryogenic nitrogen) was generally very good, and nonadiabatic wall effects were estimated to be small. Transition-free and transition-fixed configurations had significantly different force and moment data at M = 0.82 for low Reynolds number, and very small differences were noted at high Reynolds numbers.

Jacobs, Peter F.↗

Fiber optic sensors IV; Proceedings of the Third European Congress on Optics, The Hague, Netherlands, Mar. 13, 14, 1990

Recent advances in fiber-optic sensor (FOS) technology are examined in reviews and reports. Sections are devoted to components for FOSs, special fibers for FOSs, interferometry, FOS applications, and sensing principles and influence. Particular attention is given to solder glass sealing technology for FOS packaging, the design of optical-fiber current sensors, pressure and temperature effects on beat length in highly birefringent optical fibers, a pressure FOS based on vibrating-quartz-crystal technology, remote sensing of flammable gases using a fluoride-fiber evanescent probe, a displacement sensor with electronically scanned white-light interferometer, the use of multimode laser diodes in low-coherence coupled-cavity interferometry, electronic speckle interferometry compensated for environmentally induced phase noise, a dual-resolution noncontact vibration and displacement sensor based on a two-wavelength source, and fiber optics in composite materials.

Kersten, Ralf T.↗

Holographic interferometry at the NASA-Ames Hypervelocity Free-Flight Aerodynamic Facility

A laser holographic interferometer has been designed and developed to improve flow visualization for models in free-flight at high velocities and low freestream static pressures. Of special interest is the flow structure due to high-temperature effects in the post-shock region of models traveling at hypervelocity. A dual-plate technique with a double-pass, Michelson-type configuration has been incorporated in an existing hypervelocity ballistic range. Holograms of 5-deg blunt conical models traveling at 5 km/sec in air at a freestream static pressure of 0.08 atm have been made. Finite- and infinite-fringe interferograms were reconstructed from the holograms and provided qualitative flowfield results. In addition, a digital scanning technique was also used to produce a 'synthetic' infinite-fringe interferogram from the analysis of an experimental finite-fringe interferogram. A 'synthetic' infinite-fringe interferogram shows detail in the wake region not found in the experimental interferograms.

Tam, Tim C.↗

UBV photometry of hot DA white dwarfs

Johnson UBV photometry has been obtained photoelectrically for a set of DA white dwarfs with effective temperatures greater than 20,000 K and for the AM Her type binary HO538 + 608. Most of the white dwarfs lie within existing Einstein IPC or EXOSAT LE soft X-ray fields, therefore they are of interest as potential serendipitous soft X-ray sources. In addition, high dispersion spectroscopy has been used to differentiate seven of these objects to be subdwarfs.

Kidder, K. M.↗

Quantitative spectroscopy of hot stars

A review on the quantitative spectroscopy (QS) of hot stars is presented, with particular attention given to the study of photospheres, optically thin winds, unified model atmospheres, and stars with optically thick winds. It is concluded that the results presented here demonstrate the reliability of Qs as a unique source of accurate values of the global parameters (effective temperature, surface gravity, and elemental abundances) of hot stars.

Kudritzki, R. P.↗