Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solutions center”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Monitor for status epilepticus seizures

This paper describes the sensor technology and associated electronics of a monitor designed to detect the onset of a seizure disorder called status epilepticus. It is a condition that affects approximately 3-5 percent of those individuals suffering from epilepsy. This form of epilepsy does not follow the typical cycle of start-peak-end. The convulsions continue until medically interrupted and are life threatening. The mortality rate is high without prompt medical treatment at a suitable facility. The paper describes the details of a monitor design that provides an inexpensive solution to the needs of those responsible for the care of individuals afflicted with this disorder. The monitor has been designed as a cooperative research and development effort involving the United States Army Armament Research, Development, and Engineering Center's Benet Laboratories (Benet) and the Cerebral Palsy Center for the Disabled (Center), in association with the Department of Neurology at Albany Medical College (AMC). Benet has delivered a working prototype of the device for field testing, in collaboration with Albany Medical College. The Center has identified several children in need of special monitoring and has agreed to pursue commercialization of the device.

Johnson, Mark↗
NASA NTRS1996

A method for landing gear modeling and simulation with experimental validation

This document presents an approach for modeling and simulating landing gear systems. Specifically, a nonlinear model of an A-6 Intruder Main Gear is developed, simulated, and validated against static and dynamic test data. This model includes nonlinear effects such as a polytropic gas model, velocity squared damping, a geometry governed model for the discharge coefficients, stick-slip friction effects and a nonlinear tire spring and damping model. An Adams-Moulton predictor corrector was used to integrate the equations of motion until a discontinuity caused by a stick-slip friction model was reached, at which point, a Runga-Kutta routine integrated past the discontinuity and returned the problem solution back to the predictor corrector. Run times of this software are around 2 mins. per 1 sec. of simulation under dynamic circumstances. To validate the model, engineers at the Aircraft Landing Dynamics facilities at NASA Langley Research Center installed one A-6 main gear on a drop carriage and used a hydraulic shaker table to provide simulated runway inputs to the gear. Model parameters were tuned to produce excellent agreement for many cases.

Daniels, James N.↗
NASA NTRS2002

The New NASA Orbital Debris Engineering Model ORDEM2000

The NASA Orbital Debris Program Office at Johnson Space Center has developed a new computer-based orbital debris engineering model, ORDEM2000, which describes the orbital debris environment in the low Earth orbit region between 200 and 2000 km altitude. The model is appropriate for those engineering solutions requiring knowledge and estimates of the orbital debris environment (debris spatial density, flux, etc.). ORDEM2000 can also be used as a benchmark for ground-based debris measurements and observations. We incorporated a large set of observational data, covering the object size range from 10 mm to 10 m, into the ORDEM2000 debris database, utilizing a maximum likelihood estimator to convert observations into debris population probability distribution functions. These functions then form the basis of debris populations. We developed a finite element model to process the debris populations to form the debris environment. A more capable input and output structure and a user-friendly graphical user interface are also implemented in the model. ORDEM2000 has been subjected to a significant verification and validation effort. This document describes ORDEM2000, which supersedes the previous model, ORDEM96. The availability of new sensor and in situ data, as well as new analytical techniques, has enabled the construction of this new model. Section 1 describes the general requirements and scope of an engineering model. Data analyses and the theoretical formulation of the model are described in Sections 2 and 3. Section 4 describes the verification and validation effort and the sensitivity and uncertainty analyses. Finally, Section 5 describes the graphical user interface, software installation, and test cases for the user.

Liou, Jer-Chyi↗
NASA NTRS1985

Spinoff from Wind Tunnel Technology

Douglas Juanarena, a former NASA Langley instrument design engineer, found a solution to the problem of long, repetitive tunnel runs needed to measure airflow pressures. Electronically scanned pressure (ESP) replaced mechanical systems with electronic sensors. Juanarena licensed the NASA-patented technology and now manufactures ESP modules for research centers, aerospace companies, etc.

Source record↗
NASA NTRS2002

Full and Partial Admission Performance of the Simplex Turbine

The turbines used in rocket-engine applications are often partial-admission turbines, meaning that the flow enters the rotor over only a portion of the annulus. These turbines have been traditionally analyzed, however, assuming full-admission characteristics. This assumption enables the simulation of only a portion of the 360-degree annulus, with periodic boundary conditions applied in the circumferential direction. While this traditional approach to the simulating the flow in partial-admission turbines significantly reduces the computational requirements, the accuracy of the solutions has rarely been evaluated. In the current investigation, both full- and partial-admission three dimensional unsteady Navier-Stokes simulations were performed for a partial-admission turbine designed and tested at NASA Marshall Space Flight Center. The results indicate that the partial-admission nature of the turbine must be included in simulations to properly predict the performance and flow unsteadiness of the turbine.

Dorney, D. J.↗
NASA NTRS2009

Analysis of Automated Aircraft Conflict Resolution and Weather Avoidance

This paper describes an analysis of using trajectory-based automation to resolve both aircraft and weather constraints for near-term air traffic management decision making. The auto resolution algorithm developed and tested at NASA-Ames to resolve aircraft to aircraft conflicts has been modified to mitigate convective weather constraints. Modifications include adding information about the size of a gap between weather constraints to the routing solution. Routes that traverse gaps that are smaller than a specific size are not used. An evaluation of the performance of the modified autoresolver to resolve both conflicts with aircraft and weather was performed. Integration with the Center-TRACON Traffic Management System was completed to evaluate the effect of weather routing on schedule delays.

Love, John F.↗
NASA NTRS2015

Future of Condition Based Maintenance at Stennis

This study seeks to understand the current state of condition based maintenance (CBM) at Stennis Space Center and set a bench mark for the future expansion of the CBM program. Condition based maintenance is the idea of maintaining an asset upon decreasing performance or when a failure is impending instead of at some arbitrary time regardless of condition. Special attention was paid to remote sensing and monitoring of assets around the center to cut maintenance costs and extend overall operational lifetime of those assets. It was found that 55 percent of the categories of assets which could actually utilize a remote CBM program are currently being partially monitored. CBM solutions that have been investigated and proposed for future deployment cover areas such as building integrity, oil analysis, power line and water pipe inspection.

George, Cory A.↗
NASA NTRSDate not supplied

Wall-Modeled Large-Eddy Simulations for High-Lift Configurations using FUN3D

Wall-modeled large-eddy simulation (WMLES) capability has recently been implemented into FUN3D, an unstructured, node-centered, finite-volume solver developed at the NASA Langley Research Center. In this paper, WMLES is assessed for two configurations that are representative for high-lift applications. The first configuration is a nominal two-dimensional multielement airfoil that has been extensively studied in the literature. WMLES solutions are computed for four angles of attack and compared with previously reported solutions. Good agreement of integrated forces, surface pressures, and boundary-layer velocity profiles is shown with available experimental data especially at lower angles of attack. WMLES solutions are also computed for the NASA High-Lift Common Research Model over a large range of angles of attack. Forces, pitching moments, and pressure distributions are favorably compared with the experimental data up to the maximum lift, including the angle of attack where the maximum lift is obtained experimentally. Eddy visualization techniques of q-criterion and density-gradient magnitude illustrate the resolved content.

High-Lift flows↗
NASA NTRS2007

Simulation of a Periodic Jet in a Crossflow with a RANS Solver Using an Unstructured Grid

A second-order unstructured-grid code, developed and used primarily for steady aerodynamic simulations, is applied to the synthetic jet in a cross flow. The code, FUN3D, is a vertex-centered finite-volume method originally developed by Anderson[1, 2], and is currently supported by members of the Fast Adaptive Aerospace Tools team at NASA Langley. Used primarily for design[3] and analysis[4] of steady aerodynamic configurations, FUN3D incorporates a discrete adjoint capability, and supports parallel computations using MPI. A detailed description of the FUN3D code can be found in the references given above. The code is under continuous development and contains a variety of flux splitting algorithms for the inviscid terms, two methods for computing gradients, several turbulence models, and several solution methodologies; all in varying states of development. Only the most robust and reliable components, based on experiences with steady aerodynamic simulations, were employed in this work. As applied in this work, FUN3D solves the Reynolds averaged Navier-Stokes equations using the one equation turbulence model of Spalart and Allmaras[5]. The spatial discretization is formed on unstructured meshes using a vertex-centered approach. The inviscid terms are evaluated by a flux-difference splitting formulation using least-squares reconstruction and Roe-type approximate Riemann fluxes. Green-Gauss gradient evaluations are used for viscous and turbulence modeling terms. The discrete spatial operator is combined with a backward time operator which is then solved iteratively using point or line Gauss-Seidel and local time stepping in a pseudo time. For steady flows, the physical time step is set to infinity and the pseudo time step is ramped up with the iteration count. A second-order backward in time operator is used for time accurate flows with 20 to 50 steps in the pseudo time applied at each physical time step. For this effort, FUN3D was modified to support spatially varying boundary and initial conditions, and unsteady boundary conditions. Also, a specialized in/out flow boundary condition was implemented to model the action of the diaphragm. This boundary condition is described below in more detail. The grids were generated using the internally developed codes GridEX[6] for meshing the surfaces and inviscid regions of the domain, and for CAD access; and MesherX[7] for meshing the viscous regions. Grid spacing in on the surfaces and in the inviscid regions are indirectly controlled by specifying sources. The viscous layers are generated using an advancing layer technique. MeshersX allows the user to control the spatial variation of the first step off the surface, growth rates, and the termination criterion by providing small problem dependent subroutines.

Atkins, H. L.↗
NASA NTRS2017

Gravity-Assist Trajectories to the Ice Giants: An Automated Method to Catalog Mass- Or Time-Optimal Solutions

This work presents an automated method of calculating mass (or time) optimal gravity-assist trajectories without a priori knowledge of the flyby-body combination. Since gravity assists are particularly crucial for reaching the outer Solar System, we use the Ice Giants, Uranus and Neptune, as example destinations for this work. Catalogs are also provided that list the most attractive trajectories found over launch dates ranging from 2024 to 2038. The tool developed to implement this method, called the Python EMTG Automated Trade Study Application (PEATSA), iteratively runs the Evolutionary Mission Trajectory Generator (EMTG), a NASA Goddard Space Flight Center in-house trajectory optimization tool. EMTG finds gravity-assist trajectories with impulsive maneuvers using a multiple-shooting structure along with stochastic methods (such as monotonic basin hopping) and may be run with or without an initial guess provided. PEATSA runs instances of EMTG in parallel over a grid of launch dates. After each set of runs completes, the best results within a neighborhood of launch dates are used to seed all other cases in that neighborhood-allowing the solutions across the range of launch dates to improve over each iteration. The results here are compared against trajectories found using a grid-search technique, and PEATSA is found to outperform the grid-search results for most launch years considered.

Hughes, Kyle M.↗
NASA NTRS1992

The effects of 7.5% NaCl/6% dextran 70 on coagulation and platelet aggregation in humans

The combination solution of 7.5% NaCl/6% dextran 70 (HSD) administered IV gives hemodynamic improvement in the treatment of hemorrhagic hypotension. Since earlier dextran solutions were reported to interfere with blood coagulation, the effects of HSD on the prothrombin time (PT), the activated partial thromboplastin time (APTT), platelet aggregation, and platelet concentration were studied. The HSD mixed with human plasma (1:5 and 1:10) slightly prolonged PT, but had no effect on the APTT, compared with saline controls. The HSD also decreased human platelet aggregation at the 1:5 dilution. In separate mixing studies, the hypertonic saline component of HSD was associated with the prolongation of PT and decreased platelet aggregation. The data from these studies indicate that at its proposed therapeutic dose, HSD is expected to have minimal effect on blood coagulation.

NASA Center ARC↗
NASA NTRS1985

Space Station attitude control - An overview of requirements and solutions

Attitude control and various structural aspects of NASA's permanent manned Space Station are discussed in the framework of design flexibility, obsolescence as a deterent to a long operational life, modularity, and autonomy. Among the variable factors of specific importance, consideration is given to internal factors, such as inertial variations (up to 400 percent), center of mass movements (up to 28 m), and shifts in modal characteristics, as well as to external torque shifts associated with aerodynamic moments and gravity gradients. The compatibility among multiple-user requirements is also considered. As the Station is a low-orbit spacecraft, its attitude will be greatly affected by the inhomogeneity of the atmosphere, placing a priority on the attitude control techniques. A combination of passive (spring-mass-damper suspension systems) and active (sensor/disturbance-canceling device) systems are expected to be used.

Buchanan, H. J.↗
NASA NTRS2002

Human Factors Process Task Analysis: Liquid Oxygen Pump Acceptance Test Procedure at the Advanced Technology Development Center

This viewgraph presentation provides information on Human Factors Process Failure Modes and Effects Analysis (HF PFMEA). HF PFMEA includes the following 10 steps: Describe mission; Define System; Identify human-machine; List human actions; Identify potential errors; Identify factors that effect error; Determine likelihood of error; Determine potential effects of errors; Evaluate risk; Generate solutions (manage error). The presentation also describes how this analysis was applied to a liquid oxygen pump acceptance test.

Diorio, Kimberly A.↗
NASA NTRS2004

The Integration of a Load Limiter to an Orbiter Over-Center Mechanism

This paper summarizes the design process used to relieve the predicted high loads on a Space Shuttle Orbiter mechanism prior to the STS-112 flight. The overloading of the mechanism was due to a dynamic response between the orbiter and payload that was specific to this payload s mass and attachment scheme. A solution was devised by adding a component that prevented overload of the mechanism. In addition, the introduction of the new component neither interfered with the normal operation nor required extra-vehicular activity from a crewmember. By utilizing rapid prototyping technology, engineers were able to verify clearances and feasibility while preparing to build the flight hardware. This design solution was successfully flown on STS-112 and STS-113.

Gilmore, Adam↗
DOE OSTI2024

Transferring predictions of formation energy across lattices of increasing size*

In this study, we show the transferability of graph convolutional neural network (GCNN) predictions of the formation energy of the nickel-platinum solid solution alloy across atomic structures of increasing sizes. The original dataset was generated with the large-scale atomic/molecular massively parallel simulator using the second nearest-neighbor modified embedded-atom method empirical interatomic potential. Geometry optimization was performed on the initially randomly generated face centered cubic crystal structures and the formation energy has been calculated at each step of the geometry optimization, with configurations spanning the whole compositional range. Using data from various steps of the geometry optimization, we first trained our open-source, scalable implementation of GCNN called HydraGNN on a lattice of 256 atoms, which accounts well for the short-range interactions. Using this data, we predicted the formation energy for lattices of 864 atoms and 2048 atoms, which resulted in lower-than-expected accuracy due to the long-range interactions present in these larger lattices. We accounted for the long-range interactions by including a small amount of training data representative for those two larger sizes, whereupon the predictions of HydraGNN scaled linearly with the size of the lattice. Therefore, our strategy ensured scalability while reducing significantly the computational cost of training on larger lattice sizes.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Second Coordination Sphere Effects in an Evolved Ru Complex Based on Highly Adaptable Ligand Results in Rapid Water Oxidation Catalysis

A new Ru complex containing the deprotonated 2,2':6',2"-terpyridine-6,6"-diphosphonic acid (H 4 tPa) and pyridine (py) of general formula [Ru II (H 3 tPa-κ-N 3 O)(py) 2 ] + , 2 + , has been prepared and thoroughly characterized by means of spectroscopic and electrochemical techniques, X-ray diffraction analysis, and density functional theory (DFT) calculations. Complex 2 + presents a dynamic behavior in the solution that involves the synchronous coordination and the decoordination of the dangling phosphonic groups of the tPa 4– ligand. Yet, at oxidation state IV, complex 2 + becomes seven coordinated with the two phosphonic groups now bonded to the metal center. Further, at this oxidation state at neutral and basic pH, the Ru complex undergoes the coordination of an exogenous OH – group from the solvent that leads to an intramolecular aromatic O atom insertion into the CH bond of one of the pyridyl groups, forming the corresponding phenoxo-phosphonate Ru complex [Ru III (tPaO-κ-N 2 O P O C )(py) 2 ] 2– , 4 2– , where tPaO 5– is the 3-(hydroxo-[2,2':6',2"-terpyridine]-6,6"-diyl)bis(phosphonate) ligand. This new in situ generated Ru complex, 4 2– , has been isolated and spectroscopically and electrochemically characterized. In addition, a crystal structure has been also obtained using single-crystal X-ray diffraction techniques. Complex 4 2– turns out to be an exceptional water oxidation catalyst achieving record maximum turnover frequencies (TOF max ) on the order of 16 000 s –1 . A mechanistic analysis complemented with DFT calculations has further been carried out, showing the critical role of intramolecular second coordination sphere effects exerted by the phosphonate groups in lowering the activation energy at the rate-determining step.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Unlocking the Potential of Marine Energy Using Hydrogen Generation Technologies

Marine energy, including ocean waves, ocean currents, ocean thermal gradients, tides, and river currents, is a vast and untapped resource that can be harnessed to help enable the transition to renewable energy. Marine energy is an attractive renewable resource because of its energy density, predictability, and persistence. Further, marine energy has the potential to provide energy for utility-scale applications, remote and distributed applications, and rapidly expanding maritime industries, such as aquaculture and shipping. Marine energy technologies are, however, at a nascent stage of development, and a significant amount of the resource is located far from population centers and transmission infrastructure. Accordingly, to unlock the full potential of marine energy, efficient methods of storing and transporting captured marine energy are needed so that the energy can be used when and where it is needed. A promising solution to these energy storage and transportation challenges is to combine marine energy and hydrogen generation technologies. Herein, we provide a high-level analysis of the unique value proposition and technical challenges of combining marine energy and hydrogen technologies. First, we review marine energy technologies, electrolysis technologies, and hydrogen storage methods. Next, we consider specific applications and opportunities for combining the two technologies. Finally, we identify critical R&D challenges that must be overcome to successfully combine marine energy and hydrogen generation technologies. As part of our fact-finding effort in this area, we held a workshop attended by marine energy and hydrogen technology experts from industry, academia, national labs, and government entities to explore the technical challenges and opportunities for combined marine energy and hydrogen generation systems. Our intent is that this document and the report from the workshop can be used in conjunction to help identify and direct research and development that is needed to realize the potential of marine energy-hydrogen systems.

08 HYDROGEN↗
DOE OSTI2022

Novel Source Development for Focused Ion Beam Implantation and Irradiation [Slides]

We have demonstrated focused ion implantation for fabrication of single atom devices and nanofabrication. This is a viable solution for prototyping - fast and easy! There is on-going work in diamond, SiN, SiC, hBN, GaN, AlGan, etc. A new liquid metal alloy ion source development is on-going. There is a pathway towards deterministic defect centers in wide bandgap materials using FIB implantation.

43 PARTICLE ACCELERATORS↗