Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “reflection data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Optical spectroscopy of molten fluorides: Methods, electronic and vibrational data, structural interpretation, and relevance to radiative heat transfer

In this study, to help address the need for predicting radiative heat transfer (RHT) behavior of molten salts, we conducted a comprehensive review of methods and data from optical spectroscopic measurements on molten fluoride salts. Transmittance, reflectance, and trans-reflectance experimental methods are discussed, along with the corresponding data reduction methodology and the limitations of each technique. Optical spectroscopy is a convenient indirect probe for changes in structural parameters with temperature and composition. Electronic and vibrational absorption data for transition-metal, lanthanide, and actinide solutes and vibrational absorption data for alkali and alkaline earth fluoride solvents are compiled, and the corresponding structural interpretation is discussed and compared with other experimental and theoretical work. We find that solvent and solute vibrational absorption can be significant in the mid-infrared, resulting in near-infrared edges of significance to RHT. Extrapolation and averaging of existing edge data leads to estimated gray absorption coefficient values at 700 °C of 546 m —1 for FLiBe and 276 m —1 for FLiNaK, both within the range of 1 – 6000 m —1 identified to be of engineering relevance for radiative heat transfer analysis.

36 MATERIALS SCIENCE↗
NASA NTRS1991

On the reflectivity of complex mesh surfaces

Poorer than expected surface reflectivity was observed in an early Tracking and Data Relay Satellite System antenna utilizing a tricot mesh weave. This poor reflectivity was determined to be caused by inadequate electrical contact at wire crossover points. A proper mathematical and numerical approach to assess the impact of wire junctions on reflectivity performance is developed. A mathematical method is presented for computing the surface reflectivity of complex mesh configurations like those on unfurlable-type spacecraft antennas. The method is based on the Floquet mode expansion to establish an integral equation for mesh wire currents. The equation is solved using the method of moments with triangular basis functions. It is observed that it is necessary to give special attention to the junction treatment among different branches of the mesh configurations. A vector junction current approach that resulted in satisfactory solutions for the current is described. The results of numerical simulations are compared against measured data and excellent agreement is observed.

Imbriale, William A.↗
DOE OSTI2023

Methodology and Tool for the Physical Security Analysis of Micro and Advanced Reactors

This work proposes a dynamic evaluation methodology to relax the conservatism in physical security evaluation, by leveraging an ongoing work in the Light Water Reactor Sustainability pathway. This methodology is implemented in a dynamic risk assessment tool named Event Modeling Risk Assessment using Linked Diagrams (EMRALD). The work extends EMRALD’s capability to support a sandbox feature where analysts can easily create attack scenarios and modify advanced/small modular reactor (A/SMR) security and safety features using templates. This approach saves time and cost since the analysis does not require creating detailed computer-aided design models, as is commonly required in commercial force-on-force software tools. EMRALD is completely free to use at https://emraldapp.inl.gov. We have developed basic templates including physical barriers, intrusion sensors, physical areas, and safety actions, that can be downloaded from EMRALD’s GitHub site: https://github.com/idaholab/EMRALD. These templates use generic data commonly used for training purposes, which do not reflect any actual operating nuclear reactor. Users may adjust the data in the templates with their own dataset and/or create new templates in EMRALD. The proposed methodology combines security and safety by assessing sabotage effects up to the radiological consequence to the public instead of merely the core damage state. This practice follows the industry standard for advanced non-light-water reactors currently proposed for endorsement by the Nuclear Regulatory Commission. The combination of security and safety is expressed in an achievability-consequence chart. EMRALD can be used to generate data for this chart. A hypothetical case study using a representative sodium-cooled fast reactor (SFR) facility is presented in this report to demonstrate this methodology. This case study does not contain any actual nuclear plant information. This work will benefit A/SMR vendors and utilities to implement security by design during the reactor design iteration phase, such that they do not have to perform upgrades and retrofits to the reactor after it is installed to improve its physical protection system. The tool may also be used to analyze domestic or foreign reactor designs to support the International Nuclear Security Techniques for Advanced Reactors (INSTAR) bilateral missions. Future works are planned to implement the methodology on a reference SFR reactor and a reference high-temperature gas-cooled reactor to obtain insights and lessons-learned for the A/SMR community.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2000

BOREAS RSS-3 Reflectance Measured from a Helicopter-Mounted SE-590

The BOREAS RSS-3 team collected multiple remotely sensed data sets from the NASA UH-1 helicopter. This data set includes helicopter-based radiometric measurements of forested sites acquired during BOREAS made with an SE-590 processed to reflectance factors. The data used in this analysis were collected in 1994 during the three BOREAS IFCs at numerous tower and auxiliary sites in both the NSA and the SSA. The 15-degree FOV of the SE-590 yielded a ground resolution of approximately 79 m at the 300-m nominal altitude. The data are provided in tabular ASCII files.

Hall, Forrest G.↗
DOE OSTI2025

LandScan Global 30 Arcsecond Annual Global Gridded Population Datasets from 2000 to 2022

Abstract Oak Ridge National Laboratory (ORNL) annually develops the LandScan Global (LSG) dataset, a 30 arcsecond global gridded population dataset representing global ambient human population distribution. This multivariable dasymetric model disaggregates census counts within administrative boundaries using ancillary data. Each country’s distribution reflects cultural and socioeconomic patterns; manual validations yield a unique global dataset for assessing populations at risk. For over two decades, LSG has been a standard for estimating populations at risk, aiding U.S. federal government, academia and humanitarian organizations. During disasters such as the 2004 Indian Ocean tsunami and the 2010 Haiti earthquake and geopolitical crises such as the Syrian civil war and the 2022 Russian invasion of Ukraine, LSG supported scientific and operational communities in emergency response and recovery. In 2022, LSG datasets from 2000 onward were made publicly available through ORNL’s LandScan Portal. This data descriptor details our methodology and the application of geospatial science and machine learning to geographic and demographic data, highlighting uses in urban resiliency, emergency management, disaster response, and human health and security.

Science & Technology - Other Topics↗
NASA NTRS2009

Standards-Based Wireless Sensor Networking Protocols for Spaceflight Applications

Wireless sensor networks (WSNs) have the capacity to revolutionize data gathering in both spaceflight and terrestrial applications. WSNs provide a huge advantage over traditional, wired instrumentation since they do not require wiring trunks to connect sensors to a central hub. This allows for easy sensor installation in hard to reach locations, easy expansion of the number of sensors or sensing modalities, and reduction in both system cost and weight. While this technology offers unprecedented flexibility and adaptability, implementing it in practice is not without its difficulties. Any practical WSN deployment must contend with a number of difficulties in its radio frequency (RF) environment. Multi-path reflections can distort signals, limit data rates, and cause signal fades that prevent nodes from having clear access to channels, especially in a closed environment such as a spacecraft. Other RF signal sources, such as wireless internet, voice, and data systems may contend with the sensor nodes for bandwidth. Finally, RF noise from electrical systems and periodic scattering from moving objects such as crew members will all combine to give an incredibly unpredictable, time-varying communication environment.

Barton, Richard J.↗
NASA NTRS1986

Some examples of deep structure of the Archean from geophysics

The development of Archean crust remains as one of the significant problems in earth science, and a major unknown concerning Archean terrains is the nature of the deep crust. The character of crust beneath granulite terrains is especially fascinating because granulites are generally interpreted to represent a deep crustal section. Magnetic data from this area can be best modeled with a magnetized wedge of older Archean rocks (granulitic gneisses) underlying the younger Archean greenstone terrain. The dip of the boundary based on magnetic modeling is the same as the dip of the postulated thrust-fault reflection. Thus several lines of evidence indicate that the younger Archean greenstone belt terrain is thrust above the ancient Minnesota Valley gneiss terrain, presumably as the greenstone belt was accreted to the gneiss terrain, so that the dipping reflection represents a suture zone. Seismic data from underneath the granulite-facies Minnesota gneiss terrain shows abundant reflections between 3 and 6 s, or about 9 to 20 km. These are arcuate or dipping multicyclic events indicative of layering.

Smithson, S. B.↗
DOE OSTI2019

Investigation of goodness of model data fit using PLSR and PCR regression models to determine informative wavelength band in NIR region for non-invasive blood glucose prediction

Diabetes mellitus is a metabolic disorder characterized by the deficiency in insulin secretion or insulin action on target tissues. Diabetes being diagnosed, requires frequent monitoring. Current measurement techniques are invasive in nature, which is painful. Non-invasive measurement methods for the prediction of blood glucose is a big challenge. Hence this paper focuses on a comparative study to analyze the performance of the two regression models: partial least square regression (PLSR) and principal component regression (PCR) models to arrive at the best regression model for the prediction of blood glucose non-invasively based on NIR diffuse reflectance spectroscopy. The regression model developed involves spectral data collected from 32 subjects from a diabetic center using diffuse reflectance spectrometer (DRS). The spectroscopic data were acquired from the subjects both invasively using clinical method and non-invasively using DRS setup in the NIR spectral range whose wavelength ranges from 750 to 1040 nm. Multivariate analysis using PLSR is found to be a better regression model in terms of the fitted response and estimated mean square prediction error. It is observed that the mean square error value is 0.04 mg/dl for the tenth component in the PLSR model. The developed regression model also proves to be a useful tool in identifying the informative wavelength bands for blood glucose measurement.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1986

Constraints on the composition of Jupiter's stratospheric aerosols from ultraviolet photometry

The absolute reflectivity of Jupiter has been obtained in 50 A-wide regions centering on 0.221, 0.233, 0.252, and 0.330 microns from three series of IUE satellite spectra taken in November 1979. The data indicate a strong decrease in reflectivity for latitudes greater than about 30 deg, in keeping with Voyager measurements. An additional 24 spectra were also obtained in a west-east series along the equator, as well as near 40 deg N latitude. These data favor models in which the haze particles have effective radii within a factor of 2 of 0.2 microns. Near the equator, the haze aerosols produce much less absorption than near 40 deg N; the aerosol distributions and optical properties derived are noted to be more dependent on the assumed location and reflectivity of the top of the tropospheric cloud.

Tomasko, M. G.↗
DOE OSTI2023

SIF and Vegetation Indices in the US Midwestern Agroecosystems, 2016-2021, Carbon Monitoring System (CMS)

This dataset contains half-hourly ground solar-induced chlorophyll fluorescence (SIF) and vegetation indices including NDVI, EVI, Red edge chlorophyll index, green chlorophyll index, and photochemical reflectance index at seven crop sites in Nebraska and Illinois for the period 2016-2021. Four sites were located at Eddy Covariance (EC) tower sites (sites US-Ne2, US-Ne3, US-UiB, and US-UiC), and three sites were located on private farms (sites Reifsteck, Rund, and Reinhart). The sites were either miscanthus, corn-soybean rotation or corn-corn-soybean rotation. The spectral data for SIF retrieval and hyperspectral reflectance for vegetation index calculation were collected by the FluoSpec2 system, installed near planting, and uninstalled after harvest to collect whole growing-season data. Raw nadir SIF at 760 nm from different algorithms (sFLD, 3FLD, iFLD, SFM) are included. SFM_nonlinear and SFM_linear represent the Spectral fitting method (SFM) with the assumption that fluorescence and reflectance change with wavelength non-linearly and linearly, respectively. Additional data include two SIF correction factors including calibration coefficient adjustment factor (f_cal_corr_QEPRO) and upscaling nadir SIF to eddy covariance footprint factor (ratio_EC footprint, SIF pixel), and measured FPAR from quantum sensors and Rededge NDVI calculated FPAR. The data are provided in comma-separated values (CSV) format.

Ameriflux↗
NASA NTRS1984

Variation in spectral response of soybeans with respect to illumination, view, and canopy geometry

Comparisons of the spectral response for incomplete (well-defined row structure) and complete (overlapping row structure) canopies of soybeans indicated a greater dependence on Sun and view geometry for the incomplete canopies. Red and near-IR reflectance for the incomplete canopy decreased as solar zenith angle increased for a nadir view angle until the soil between the plant rows was completely shaded. Thereafter for increasing solar zenith angle, the red reflectance leveled off and the near-IR reflectance increased. A 'hot spot' effect was evident for the red and near-IR reflectance factors. The 'hot spot' effect was more pronounced for the red band based on relative reflectance value changes. The ratios of off-nadir to nadir acquired data reveal that off-nadir red band reflectance factors more closely approximated straightdown measurements for time periods away from solar noon. Normalized difference generally approximated straightdown measurements during the middle portion of the day.

Ranson, K. J.↗
NASA NTRS2008

The Solid Rocket Motor Slag Population: Results of a Radar-Based Regressive Statistical Evaluation

Solid rocket motor (SRM) slag has been identified as a potential source of man-made orbital debris. The possibility that SRMs (in addition to generating dust particles in the sub-millimeter range) may generate particles up to centimeters in size has caused concern regarding their contribution to the debris environment. Returned surfaces from space do not have sufficient area or exposure time to provide a clear picture of the SRM millimeter and centimeter debris population. Currently, radar observation is probably the only way to collect data showing the debris contribution from SRMs. Such observation is used to sample the debris environment, but it is difficult to obtain accurate orbital elements for the detected debris objects. NASA has developed several models to describe the different orbital debris populations, based on assumed debris production mechanisms to create clouds of debris objects that can be propagated in time. The NASA model, LEGEND (LEO-to-GEO Environment Debris), functions as a time-tested debris model for most debris sources. However, the current LEGEND model does not include contributions from the SRM population. An SRM model has recently been developed by NASA, based on purely theoretical details of SRM production and known SRM launches, but verification with hard data is needed. Because the detections of individual SRM objects cannot be deterministically separated from the total debris observed by radar, the validation of the SRM model can only be done by combining it with the LEGEND breakup model and comparing it with data. By applying observational constraints, the degree of SRM slag contribution to the environment may be estimated. This serves as an observationally sound method from which to calibrate a purely theoretical model into something more realistic. For this study, we use the populations observed by the Haystack radar from 1996 to present. For the SRM debris, we use a historical database of SRM launches, propellant masses, and estimated locations and times of tailoff to produce and propagate the SRM debris clouds. Comparisons with radar data from the ensuing years were made, and the SRM model was altered with respect to size and mass production of slag particles to reflect the populations estimated from the data. The result is a model SRM population that fits within the bounds of the observed environment and estimates of the production and contribution of SRM debris to the environment.

Horstman, Matthew F.↗
DOE OSTI2023

System and method to fuse multiple sources of optical data to generate a high-resolution, frequent and cloud-/gap-free surface reflectance product

Aspects of the subject disclosure may include, for example, performing, by a processing system, image fusion using two or more groups of images to generate predicted images, wherein each group of the two or more groups has one of a different resolution, a different frequency temporal pattern or a combination thereof than another of the two or more groups. Gap filling can be performed by the processing system to correct images of the two or more groups. Additional embodiments are disclosed.

Guan, Kaiyu↗
DOE OSTI2018

Streamlining Stakeholder Data Accessibility Utilizing Web-Based GIS Capabilities - 18672

Environmental data is often complex, and it can be difficult to provide proper context to fully understand and comprehensively analyze the data. One tool identified to better present complicated data is the use of web-based Geographic Information Systems (GIS). Web-based GIS provides much-needed visual context to the complex data collected at Los Alamos National Laboratory (LANL). By overlaying environmental data atop relevant geographical features, such as topography, surface or subsurface geology, hydrogeological features, buildings, roads, and technical areas, LANL's diverse group of stakeholders are better able to understand environmental data collected at the LANL site within the framework of the surrounding geography. Since 2012, Los Alamos has utilized a web-based GIS module in the Intellus New Mexico data-sharing web site. This web site provides unfettered public access to LANL and New Mexico Environment Department (NMED) - Department of Energy (DOE) Oversight Bureau environmental data. Through the past five years of real world experience, LANL identified areas where questions and confusion arose, particularly for those not directly associated with the site's environmental cleanup mission. In order to query the millions of records in Intellus in a meaningful way, users had to have substantial knowledge of the data organization and nomenclature ahead of time. While this was not a challenge for LANL and NMED environmental scientists, it proved to be a substantial barrier for members of the general public to utilize Intellus. In 2017, LANL initiated an Intellus redesign with the goal of deconstructing the type of questions people asked and identifying the types of user personas accessing the site to engineer a simpler path to desired data sets. Greatly simplified click paths ('Quick Paths') were created that walk the user through the basics with a minimum of jargon and a strong reliance on mapping results for easy visualization. The improved mapping was enabled by an upgraded online GIS functionality that allowed LANL to easily integrate their own base-maps to provide users the most up to date views of their data. The integrated Intellus GIS was enhanced to assimilate with LANL's dynamic base maps and site information in relation to data collection activities, to avoid outdated presentations. A simplified user interface (UI) was added and easier data querying was designed. A more robust visual presentation was created that allowed better viewing of spatial data. All data queries in the new simplified 'Quick Path' give the users the option to map the results and save their results to their optional accounts. This brings the power of GIS visualization to all users without the need for GIS knowledge or extensive training. By integrating with Esri{sup R} technologies, base-map layers in ArcGIS Online{sup R} can be updated by LANL or other data providers at any time and reflected immediately in the Intellus mapping application called GIS+ 1. Users can even load additional map layers to GIS+ that contain their own spatial data or information shared from over a million users on ArcGIS Online{sup R}, such as ecological information from the Fish and Wildlife Service, or geology layers from the USGS. The results from the improved quick path search in Intellus can be viewed in GIS+ and analyzed using Esri's{sup R} Smart Mapping technology, which makes it easy to classify results with its visual representation of the results in an interactive histogram, where sliders can be dragged to look at various intervals for each color range for that query. With enhanced GIS+, Los Alamos National Laboratory is able to observe improve Stakeholder engagement and positive Stakeholder interactions within its public environmental database, Intellus New Mexico. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1995

GOES weather satellite observations and measurements of the May 18, 1980, Mount St. Helens eruption

We demonstrate the use of Geostationary Operational Environmental Satellite (GOES) images of the May 18, 1980, Mount St. Helens volcanic plume in providing details of the dynamics and changing character of this major explosive eruption. Visible and thermal infrared (IR) data from a sequence of images at 30-min intervals from 0850 to 1720 Local Time (LT) give information on dispersal and plume top temperature. Initial visible and IR images at 0850 show the top of a spreading co-ignimbrite-like umbrella plume and an overshooting column emerging from it, both rising off the ground-hugging pyroclastic gravity flow generated by the opening directed blast. The overshooting column had a minimum temperature significantly colder than local ambient atmosphere, indicating substantial undercooling, and a maximum altitude of 31 +/- 2 km at 0920. This large plume system then formed a high-velocity, radially spreading, gravitationally driven current before becoming advected in the wind field at an average downwind velocity of 29 m/s. Reflectance values from visible GOES data change from lower to higher during periods of transition from darker toned Plinian to lighter toned co-ignimbrite plumes indicating that in this case satellite data resolved changes in eruptive style from plumes with a coarser to a finer dominant particle size.

Holasek, R. E.↗
NASA NTRS1982

Grapevine canopy reflectance and yield

Field spectroradiometric and airborne multispectral scanner data were applied in a study of Concord grapevines. Spectroradiometric measurements of 18 experimental vines were collected on three dates during one growing season. Spectral reflectance, determined at 30 intervals from 0.4 to 1.1 microns, was correlated with vine yield, pruning weight, clusters/vine, and nitrogen input. One date of airborne multispectral scanner data (11 channels) was collected over commercial vineyards, and the average radiance values for eight vineyard sections were correlated with the corresponding average yields. Although some correlations were significant, they were inadequate for developing a reliable yield prediction model.

Minden, K. A.↗
NASA NTRS1978

X-ray reflectometer for optical efficiency and scatter measurements

An instrument has been developed to determine the reflection efficiency and scatter characteristics of optical samples at X-ray wavelengths from 1.5 to 113 A. The reflectometer operates in an oil-free vacuum chamber and measures the reflection efficiency and scatter characteristics as a function of the angle of incidence. The reflection efficiency is given for 8.34-A radiation incident on a fused silica sample finished to a flatness of one-tenth of a wavelength. The experimental reflection efficiency is compared with the theoretical data. The scatter curves are given for the direct X-ray beam and for the beam reflected from the fused silica sample at an angle of incidence of 50 arcmin. The full-width-at-half-maximum (FWHM) resolution of the instrument is approximately 13 arcsec, as determined by a least-squares smoothing of the experimental data.

Reynolds, J. M.↗
NASA NTRS2010

The Effect of Incident Light Polarization on Vegetation Bidirectional Reflectance Factor

The Laboratory-based Bidirectional Reflectance Factor (BRF) polarization study of vegetation is presented in this paper. The BRF was measured using a short-arc Xenon lamp/monochromator assembly producing an incoherent, tunable light source with a well-defined spectral bandpass at visible and near-infrared wavelengths of interest at 470 nm and 870 nm and coherent light source at 1.656 microns. All vegetation samples were measured using P and S linearly polarized incident light over a range of incident and scatter angles. By comparing these results, we quantitatively examine how the BRF of the samples depends on the polarization of the incident light. The differences are significant, depend strongly on the incident and scatter angles, and can be as high as 120% at 67 deg incident and 470nm. The global nature of Earth's processes requires consistent long-term calibration of all instruments involved in data retrieval. The BRF defines the reflection characteristics of Earth surface. It provides the reflectance of a target in a specific direction as a function of illumination and viewing geometry. The BRF is a function of wavelength and reflects the structural and optical properties of the surface. Various space and airborne radiometric and imaging remote sensing instruments are used in the remote sensing characterization of vegetation canopies and soils, oceans, or especially large pollution sources. The satellite data is validated through comparison with airborne, ground-based and laboratory-based data in an effort to fully understand the vegetation canopy reflectance, The Sun's light is assumed to be unpolarized at the top of the atmosphere; however it becomes polarized to some degree due to atmospheric effects by the time it reaches the vegetation canopy. Although there are numerous atmospheric correction models, laboratory data is needed for model verification and improvement.

Georgiev, Georgi T.↗