Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “refinement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Advances in Sensitivity Analysis Capabilities with SCALE 6.0 and 6.1

The sensitivity and uncertainty analysis sequences of SCALE compute the sensitivity of k eff to each constituent multigroup cross section using perturbation theory based on forward and adjoint transport computations with several available codes. Versions 6.0 and 6.1 of SCALE, released in 2009 and 2010, respectively, include important additions to the TSUNAMI-3D sequence, which computes forward and adjoint solutions in multigroup with the KENO Monte Carlo codes. Previously, sensitivity calculations were performed with the simple and efficient geometry capabilities of KENO V.a, but now calculations can also be performed with the generalized geometry code KENO-VI. TSUNAMI-3D requires spatial refinement of the angular flux moment solutions for the forward and adjoint calculations. These refinements are most efficiently achieved with the use of a mesh accumulator. For SCALE 6.0, a more flexible mesh accumulator capability has been added to the KENO codes, enabling varying granularity of the spatial refinement to optimize the calculation for different regions of the system model. The new mesh capabilities allow the efficient calculation of larger models than were previously possible. Additional improvements in the TSUNAMI calculations were realized in the computation of implicit effects of resonance self-shielding on the final sensitivity coefficients. Multigroup resonance self-shielded cross sections are accurately computed with SCALE's robust deterministic continuous-energy treatment for the resolved and thermal energy range and with Bondarenko shielding factors elsewhere, including the unresolved resonance range. However, the sensitivities of the self-shielded cross sections to the parameters input to the calculation are quantified using only full-range Bondarenko factors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

An adaptive space-time phase field formulation for dynamic fracture of brittle shells based on LR NURBS

Here, we present an adaptive space-time phase field formulation for dynamic fracture of brittle shells. Their deformation is characterized by the Kirchhoff–Love thin shell theory using a curvilinear surface description. All kinematical objects are defined on the shell’s mid-plane. The evolution equation for the phase field is determined by the minimization of an energy functional based on Griffith’s theory of brittle fracture. Membrane and bending contributions to the fracture process are modeled separately and a thickness integration is established for the latter. The coupled system consists of two nonlinear fourth-order PDEs and all quantities are defined on an evolving two-dimensional manifold. Since the weak form requires C 1 -continuity, isogeometric shape functions are used. The mesh is adaptively refined based on the phase field using Locally Refinable (LR) NURBS. Time is discretized based on a generalized-α method using adaptive time-stepping, and the discretized coupled system is solved with a monolithic Newton–Raphson scheme. Finally, the interaction between surface deformation and crack evolution is demonstrated by several numerical examples showing dynamic crack propagation and branching.

42 ENGINEERING↗

Mathematical Investigation of Fluid Flow, Mass Transfer, and Slag-steel Interfacial Behavior in Gas-stirred Ladles

In this study, the Euler-Euler and Euler-Lagrange modeling approaches were applied to simulate the multiphase flow in the water model and gas-stirred ladle systems. Detailed comparisons of the computational and experimental results were performed to establish which approach is more accurate for predicting the gas-liquid multiphase flow phenomena. It was demonstrated that the Euler-Lagrange approach is more accurate than the Euler-Euler approach. The Euler-Lagrange approach was applied to study the effects of the free surface setup, injected bubble size, gas flow rate, and slag layer thickness on the slag-steel interaction and mass transfer behavior. Detailed discussions on the flat/non-flat free surface assumption were provided. Significant inaccuracies in the prediction of the surface fluid flow characteristics were found when the flat free surface was assumed. The variations in the main controlling parameters (bubble size, gas flow rate, and slag layer thickness) and their potential impact on the multiphase fluid flow and mass transfer characteristics (turbulent intensity, mass transfer rate, slag-steel interfacial area, flow patterns, etc.,) in gas-stirred ladles were quantitatively determined to ensure the proper increase in the ladle refining efficiency. It was revealed that by injecting finer bubbles as well as by properly increasing the gas flow rate and the slag layer thickness, the ladle refining efficiency can be enhanced significantly.

36 MATERIALS SCIENCE↗

Thermodynamics of Boron Removal from Silicon Using CaO-MgO-Al{sub 2}O{sub 3}-SiO{sub 2} Slags

Slag refining is one of few metallurgical methods for removal of boron from silicon. It is important to know the thermodynamic properties of boron in slags to understand the refining process. The relation of the distribution coefficient of boron to the activity of silica, partial pressure of oxygen, and capacity of slags for boron oxide was investigated. The link between these parameters explains why the distribution coefficient of boron does not change much with changing slag composition. In addition, the thermodynamic properties of dilute boron oxide in CaO-MgO-Al{sub 2}O{sub 3}-SiO{sub 2} slags was determined. The ratio of the activity coefficient of boron oxide and silica was found to be the most important parameter for understanding changes in the distribution coefficient of boron for different slags. Finally, the relation between the activity coefficient of boron oxide and slag structure was investigated. It was found that the structure can explain how the distribution coefficient of boron changes depending on slag composition.

36 MATERIALS SCIENCE↗

Dephosphorization of Levitated Silicon-Iron Droplets for Production of Solar-Grade Silicon

The treatment of relatively inexpensive silicon-iron alloys is a potential refining route in order to generate solar-grade silicon. Phosphorus is one of the more difficult impurity elements to remove by conventional processing. In this study, electromagnetic levitation was used to investigate phosphorus behavior in silicon-iron alloy droplets exposed to H{sub 2}-Ar gas mixtures under various experimental conditions including, refining time, temperature (1723 K to 1993 K), gas flow rate, iron content, and initial phosphorus concentration in the alloy. Thermodynamic modeling of the dephosphorization reaction permitted prediction of the various gaseous products and indicated that diatomic phosphorus is the dominant species formed.

36 MATERIALS SCIENCE↗

Dynamic Model of Basic Oxygen Steelmaking Process Based on Multizone Reaction Kinetics: Modeling of Manganese Removal

In the earlier study, a dynamic model for the BOF process based on the multizone reaction kinetics has been developed. In the preceding part, the mechanism of manganese transfer in three reactive zones of the converter has been analyzed. The study predicts that temperature at the slag–metal reaction interface plays a major role in the Mn reaction kinetics. Further, mathematical treatments to simulate the transient rate parameters associated with each reaction interface have been developed. The model calculations of Mn removal rate obtained from different zones of the converter predicts that the first stage of the blow is dominated by the oxidation of Mn at the jet impact zone, albeit some additional Mn refining has been observed as a result of the oxidation of metal droplets in emulsion phase. The simulation result shows that the reversion of Mn from slag to metal primarily takes place at the metal droplet in the emulsion due to an increase in slag–metal interface temperature during the middle stage of blowing. In the final stage of the blow, the competition between simultaneous reactions in jet impact and emulsion zone controls the direction of mass flow of manganese. Further, the model prediction shows that the Mn refining in the emulsion is a strong function of droplet diameter and the residence time. Smaller sized droplets approach equilibrium quickly and thus contribute to a significant Mn conversion between slag and metal compared to the larger sized ones. The overall model prediction for Mn in the hot metal has been found to be in good agreement with two data sets obtained from different size converters reported in the literature.

36 MATERIALS SCIENCE↗

Solidification of Calcium Ferrite Melt Using Ultrasonic Vibration: Effect and Mechanism

Calcium ferrite (CF) is a very important binder phase in iron ore sintering processes. To improve the microstructure of CF, power ultrasound was introduced during its solidification process, and the effect of immersion depth of ultrasonic probe (IDUP) on the properties of CF was investigated in detail. The results indicated that the microstructure of CF was greatly refined; the grain size decreased from 2864 μm without ultrasonic vibration to 841 μm with ultrasonic vibration at an immersion depth of 30 mm. Without ultrasonic vibration, the density and compressive strength of CF slag were 3904 kg/m{sup 3} and 38.3 MPa, respectively. When the IDUP was increased from 10 to 30 mm, the density and compressive strength of CF increased from 4049 to 4452 kg/m{sup 3} and 52.5 to 87.3 MPa, respectively. Further, the reducibility of CF was examined. The reduction time, at the same reduction rate, decreased from 347 minutes without ultrasonic vibration to 200 minutes with ultrasonic vibration at an IDUP of 30 mm. The rate-limiting step was obviously improved, which may be attributable to the grain refinement of CF and composition segregation in the slag. In general, the properties of CF were greatly improved due to the cavitation and acoustic streaming of ultrasonic waves.

36 MATERIALS SCIENCE↗

Correlation of Oxygen and Aluminum Contents of Molten Titanium-Aluminum Alloys in Alumina and Calcia Crucibles

As a key part of investigating a new proposed Ti-alloy production process, Ti-Al alloys were produced by aluminothermic reduction experiments at 1973 K in Al{sub 2}O{sub 3} crucibles. Besides, pure Ti and Al were melted inside CaO crucibles at 1973 K to investigate the possibility of melt refining in equilibrium with CaO. The experiments were carried out in a vacuum induction furnace under argon gas at atmospheric pressure. The experimental results were proved by thermodynamic evaluations including also literature data. The correlation of oxygen and aluminum in Ti melt with 11 to 23 wt pct Al in contact with Al{sub 2}O{sub 3} was assessed as 3ln X{sub O}=− 2ln X{sub Al}−9.1±0.4. This correlation in Ti melt with 3 to 10 wt pct Al in contact with CaO was 3ln X{sub O}=− 2ln X{sub Al}−14.9±0.3. Partial molar excess Gibbs free energies of mixing and combinations thereof in Ti-rich Ti-Al-O-Ca melt were assessed as RTln (γ{sub Al}{sup 2}⋅γ{sub O}{sup 3})=−894±6 (kJ/mol), RTln(γ{sub Ca}⋅γ{sub O})=−195±4 (kJ/mol), RTln γ{sub O}=−258±6 (kJ/mol), RTln γ{sub Ca}=62±7 (kJ/mol). The activity of Al{sub 2}O{sub 3} in CaO-saturated slag was assessed as 0.003 ± 0.001. The changes of Gibbs free energy for the dissolution of 1 wt pct oxygen and 1 wt pct calcium in Ti-Al melt were estimated as −630 ± 6 and −11 ± 7 (kJ/mol), respectively. A model was developed and applied to calculate the basic data for refining Ti-Al alloy.

36 MATERIALS SCIENCE↗

Formation Mechanism of Al{sub 2}O{sub 3}-Containing Inclusions in Al-Deoxidized Spring Steel

The source, characteristics, and mechanism of Al{sub 2}O{sub 3}-containing inclusions in Al-deoxidized spring steel were investigated using electron-probe X-ray microanalysis (EPMA). Spring samples were collected during vacuum degassing (VD) refining, in a tundish ladle, and after hot rolling, respectively. Based on primary inclusion components, seven types of inclusions were observed through the manufacturing process: Al{sub 2}O{sub 3}, Al{sub 2}O{sub 3}-SiO{sub 2}, Al{sub 2}O{sub 3}-CaO, Al{sub 2}O{sub 3}-MgO, Al{sub 2}O{sub 3}-MgO-CaO, Al{sub 2}O{sub 3}-SiO{sub 2}-MnO, and Al{sub 2}O{sub 3}-SiO{sub 2}-CaO. The Al{sub 2}O{sub 3} and Al{sub 2}O{sub 3}-SiO{sub 2} inclusions were mainly attributed to deoxidization products, less than 15 μm in diameter and with liquidus temperatures exceeding 1600 °C. For Al{sub 2}O{sub 3}-CaO inclusions, which were considered to be formed by the reduction of entrapped slag by Al dissolved in the steel, the Al{sub 2}O{sub 3}/CaO ratio obviously decreased with the increase of inclusion sizes. Most Al{sub 2}O{sub 3}-SiO{sub 2}-CaO inclusions were less than 15 μm in diameter, with their composition close to that of the refining slag and a liquidus temperature near 1500 °C. The Al{sub 2}O{sub 3}-MgO and Al{sub 2}O{sub 3}-SiO{sub 2}-MnO inclusions originated from inherent reactions between dissolved [Al], [Si], [Mn], [Mg], and [O] in the steel. Al{sub 2}O{sub 3}-MgO-CaO inclusions resulted from coalescence between Al{sub 2}O{sub 3}-MgO and Al{sub 2}O{sub 3}-CaO inclusions.

36 MATERIALS SCIENCE↗

Evolutions of the Micro- and Macrostructure and Tensile Property of Cu-15Ni-8Sn Alloy During Electromagnetic Stirring-Assisted Horizontal Continuous Casting

The present study investigates the evolution of the micro- and macrostructure and tensile property of the Cu-15Ni-8Sn (weight percent) alloy prepared by horizontal continuous casting and electromagnetic stirring (EMS). The results show that the application of EMS is beneficial for grain refinement and for microstructure transformation from the dendrite to the rosette structure and that it leads to a significant improvement in the tensile property. The forced flow induced by EMS homogenizes the temperature field ahead of the solid-liquid interface, disturbing the heat flow direction and resulting in the columnar to equiaxed transition. The grain refinement under different electromagnetic stirring frequencies is mainly derived from the homogenization of the temperature and the remelting of dendritic arms. In addition, the evolution of the tensile property with and without EMS is discussed from the perspective of fracture mode and fine-grain strengthening.

36 MATERIALS SCIENCE↗

Fabrication of AZ31/MWCNTs Surface Metal Matrix Composites by Friction Stir Processing: Investigation of Microstructure and Mechanical Properties

The surface metal matrix composites of AZ31 Mg alloy reinforced with multiwall carbon nanotubes (MWCNTs) have been fabricated through the friction stir processing by a conventional and two stepped tools. The microstructure and mechanical properties of fabricated composites were studied by optical and electron microscopy, microhardness and tensile tests, respectively. The processing has developed a fine-grain structure along with good distribution of reinforcements. The hardness and tensile strength of fabricated MWCNT/AZ31 composites are generally higher than as-received and FSPed samples. The accumulative effect of grain refinement and reinforcing nanotubes is assumed to be the reason for increasing the ductility after friction stir processing. The hardness is nearly doubled for FSPed samples and some more for nanocomposites compared with the as-received sample. The elongation of nanocomposites is about two times greater than that of the as-rolled sample. The speed ratio, pass number and CNT amount are three important factors influencing the resulting microstructure and mechanical properties. The stepped tools also give a more uniform distribution of reinforcement and higher grain refinement.

36 MATERIALS SCIENCE↗

Effect of Minor Yttrium on Microstructure and Mechanical Properties of Bioimplant Mg-5Zn Alloy

This paper explores cast Mg-5Zn alloy, containing small amounts of yttrium (Y: 0.1-1.5 wt.%), through microstructure evaluation and tensile and hardness tests. The results reveal that addition of Y to the alloy refines microstructure, especially when secondary phases, Mg{sub 3}Zn{sub 6}Y (I) and Mg{sub 3}Zn{sub 3}Y{sub 2} (W), form. I-phase is detected when 0.3 wt.% Y is added to the alloy, while W-phase is only observed in Mg-5Zn-1.5Y alloy. The results also show that the addition of Y improves yield and tensile strength as well as the hardness value of the Mg-5Zn alloy at the expense of its formability. The three effects of the solid solution of Y in α-Mg, grain refinement, and the formation of I- and W-phases are the reasons for such behavior. The improvement is more pronounced when W-phase appears in the microstructure. In other words, Mg-5Zn-1.5Y alloy behaves stronger and harder than other alloys and may be considered as a potential candidate for bioimplant applications if its degradation behavior meets the requirements.

36 MATERIALS SCIENCE↗

Effect of Post-deformation Annealing Treatment on the Microstructural Evolution of a Cold-Worked Corrosion-Resistant Superalloy (CRSA) Steel

The post-deformation annealing treatments of a commercial cold-worked corrosion-resistant superalloy steel (Sanicro 28 steel) were carried out at different temperatures in the range of 900-1100 °C for different holding durations of 5, 10, and 15 min. The effects of post-deformation annealing time and temperature on the microstructural evolution and subsequent mechanical properties of the processed Sanicro 28 steel were investigated. The observations indicated that twin–twin hardening in cold deformation condition mainly correlates with abundant nucleation of mechanical twins in multiple directions resulting in considerable strain hardening behavior. Microstructural investigations showed that the static recrystallization takes place after isothermal holding at 900 °C for 5 min. Increasing the annealing temperature from 900 to 1050 °C leads to recrystallization development and grain refinement in the as-recrystallized state. In addition, an increase in annealing duration from 5 to 15 min leads to subgrain coarsening and subsequently larger recrystallized grains size. The occurrence of large proportion of the grain refinement, which is achieved in the first annealing stage at 1050 °C after 5 min, is considered as the main factor for the maximum elongation at this stage.

36 MATERIALS SCIENCE↗

Effect of Sm-Rich Phase on Corrosion Behavior of Hot-Extruded AZ31-1.5Sm Magnesium Alloy

The effects of Sm on the corrosion and microstructure behavior of hot-extruded AZ31 magnesium alloy were investigated by SEM, TEM, weight loss analysis, and electrochemical measurements. The results indicated that granular Al{sub 2}Sm phase ~ 4 μm in size in the hot-extruded AZ31 magnesium alloy modified with 1.5 wt.% Sm leads to significant grain refinement. The corrosion rate decreased from 15.98 × 10{sup −4} to 11.19 × 10{sup −4} g cm{sup −2} h{sup −1} in the transverse section and from 8.57 × 10{sup −4} to 6.20 × 10{sup −4} g cm{sup −2} h{sup −1} in the longitudinal section. Compared to the unmodified alloy, the corrosion potential of the Sm-modified alloy in the transverse and longitudinal sections increased by 98 and 62 mV, respectively, and the R{sub ct} value (charge transfer resistance) in the transverse and longitudinal sections of the modified alloy increased from 1764 and 1756 to 2928 and 2408 Ω cm{sup 2}, respectively. The results showed that the corrosion resistance of hot-extruded AZ31 magnesium alloy was significantly improved by Sm addition due to the grain refinement, the decreased dislocation density, and the suppression of micro-galvanic corrosion caused by Al-Sm-(Mn) intermetallic compounds.

36 MATERIALS SCIENCE↗

Rapid Strengthening Without Loss of Ductility via Electropulsing Treatment in Ti-6Al-4V Alloy

The commercial (hot-rolled and annealed) Ti-6Al-4V alloy subjected to electropulsing was investigated in this study. The results show that the electropulsing-treated sample with optimized parameter exhibits greatly refined microstructure and notable strength improvement without loss of ductility. The main strengthening mechanism is recognized as phase transformation and rapid grain refinement induced by recrystallization under EPT.

36 MATERIALS SCIENCE↗

Main Directions of Recent Works on Al-Zn-Based Alloys for Foundry Engineering

The composition and structural modification of high-aluminum zinc alloys and high-zinc aluminum alloys influence their wear properties and structural stability. The work described has been aimed at improving properties of the sand-cast Al-Zn-based foundry alloys, particularly their ductility and dimensional stability, by melt inoculation and/or change of chemical composition. In a series of studies, high-aluminum Zn-(25-26) wt.% Al-(1-2.5) wt.% Cu and high-zinc Al-(27-30) wt.% Zn-(1.5-2.5) wt.% Cu alloys have been doped with different levels of added Ti and Mn. The alloys’ structure and mechanical properties have been studied using scanning electron microscopy (SEM), light microscopy (LM), dilatometry and pin-on-disk wear measurements. A small addition of Ti introduced with Zn-4Ti master alloy leads to significant grain refinement of the high-aluminum zinc alloys. A small addition of Ti introduced with Al-3Ti-0.15C master alloy leads to significant grain refinement of the high-zinc aluminum alloys. In the ternary alloys, partially replacing Cu with Ti and/or Mn allows dimensional changes to be reduced while preserving good wear properties.

36 MATERIALS SCIENCE↗

Fabrication and Characterization of A5083-WC-Al{sub 2}O{sub 3} Surface Composite by Friction Stir Processing

In this study, WC-Al{sub 2}O{sub 3} ceramic composite was incorporated into Al5083 to produce a surface composite by friction stir processing (FSP), and the microstructure, hardness and wear properties of Al5083-WC-Al{sub 2}O{sub 3} surface composite were evaluated. Optical microscopy of FSPed samples showed grain refinement in the stir zone. The addition of WC-Al{sub 2}O{sub 3} particles as well as increase in FSP pass number had a considerable effect on grain refinement, and the grain size of Al5083 base metal of 36 µm reduced to 11 µm for Al5083-WC-Al{sub 2}O{sub 3} surface composite after four passes. The SEM observation of the surface composite revealed that the WC-Al{sub 2}O{sub 3} particles distributed homogenously in the matrix and by increasing the FSP passes, the initial agglomerates of mechanochemically synthesized WC-Al{sub 2}O{sub 3} powders could be fractured. Microhardness evaluation showed a substantial improvement by adding WC-Al{sub 2}O{sub 3} particles and increase in FSP pass number. The maximum microhardness value of 101 HV belonged to surface composite after four passes, while the microhardness of the base metal was 65 HV. Wear test results revealed enhanced tribological behavior with a similar trend of microhardness values. Scanning electron microscopy tests revealed both adhesive and abrasive wear mechanisms on the surface of the wear test specimens.

36 MATERIALS SCIENCE↗

Microstructure Evolution and Mechanical Properties of Large-Scale AZ80 Magnesium Alloy Billets Produced by Multitemperature Multidirectional Forging

Grain refinement is an effective method to improve the mechanical properties of magnesium (Mg) alloys. In the present research, the combination of multidirectional forging (MDF) and forward extrusion for sizing with decreasing temperature pass by pass was employed to deform as-cast AZ80 magnesium alloy billet with large size to obtain fine grains and homogeneous microstructure. It was found that with the increasing number of MDF passes, the average grain size decreases; the homogeneity of microstructures and the percentages of dynamic recrystallised grains increase simultaneously. After six-pass MDF, fine and homogeneous microstructure with an average grain size of 15 μm was achieved; however, grain refinement became very difficult with a further increase in the MDF pass number. After eight-pass MDF plus forward extrusion for sizing, excellent mechanical properties of large-scale AZ80 magnesium alloy billet were obtained. The tensile strength, the yield strength and the elongation of billet are 410 MPa, 292 MPa and 14%, respectively. Furthermore, during multitemperature MDF, the inverse of the square root of grain size and tensile yield strength fit well with the Hall–Petch relationship.

36 MATERIALS SCIENCE↗