Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “prepare”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Evaluation of ERTS-1 imagery for land use/resource inventory information

This investigation was to develop a low cost, manual technique for enhancing ERTS-1 imagery and preparing it in suitable format for use by users with wide and varied interests related to land use and natural resources information. The goals were: to develop enhancement techniques based on concepts and practices extant in photographic sciences, to provide a means of allowing productive interpretation of the imagery by manual means, to produce a product at low cost, to provide a product that would have wide applications, and one compatible with existing information systems. Cost of preparation of the photographically enhanced, enlarged negatives and positives and the diazo materials is about 1 cent per square mile. Cost of creating and mapping a land use classification of twelve use types at a scale of 1:250,000 is only $1 per square mile. The product is understood by users, is economical, and is compatible with existing information systems.

Hardy, E. E.↗
NASA NTRS1974

Snow-extent mapping and lake ice studies using ERTS-1 MSS together with NOAA-2 VHRR

Five snow extent maps of the 5,601 sq km American River Basin were prepared using a Zoom Transfer Scope from ERTS-1 MSS band 4 imagery. The maps were generally completed within one hour. A snowmelt curve based on ERTS-1 imagery was used as a calibration standard or comparison for maps prepared from NOAA-2 VHRR imagery in the same manner. Cost comparisons with U-2 derived imagery indicate that ERTS-1 snow mapping of the basins is six times faster. Conservative estimates of comparable aircraft snow survey flights yields a cost figure 200 times that of the ERTS-1 snow map. Snow mapping attempts in the Lake Ontario Basin demonstrated that ERTS-1 is not well suited to large basins. Optimum size of basins for ERTS studies is believed to range from about 250 sq km to 30,000 sq km. The value of the ERTS-1 MSS for Great Lake ice evaluation was proved during the past winter on Lake Erie. Not only were ice features and types of ice identified, but melting ice was detected through the combined use of band 5 and band 7. Ice movement (direction and speed) was mapped by examining imagery from two successive days.

Wiesnet, D. R.↗
NASA NTRS1973

Optical data processing and projected applications of the ERTS-1 imagery covering the 1973 Mississippi River Valley floods

Flooding along the Mississippi River and some of its tributaries was imaged by the multispectral scanner (MSS) on the Earth Resources Technology Satellite (ERTS-1) on at least three orbits during the spring of 1973. The ERTS data provided the first opportunity for mapping the regional extent of flooding at the time the imagery was acquired. Special optical data processing techniques were used to produce a variety of multispectral color composites which enhanced floodplain details. One of these, a two-color composite of near infrared bands 6 and 7, was enlarged and registered to 1:250,0OO-scale topographic maps and used as the basis for preparation of flood image maps. Two specially filtered three-color composites of MSS bands 5, 6, and 7 and 4, 5, and 7 were prepared to aid in the interpretation of the data. The extent of the flooding was vividly depicted on a single image by two-color temporal composites produced on the additive-color viewer using band 7 flood data superimposed on pre-flood band 7 images. On May 24, when the floodwaters at St. Louis receded to bankfull stage, imagery was again obtained by ERTS. Analysis of temporal data composites of the pre-flood and post-flood band 7 images indicate that changes in surface reflectance characteristics caused by the flooding can be delineated, thus making it possible to map the overall area flooded without the necessity of a real-time system to track and image the peak flood waves. Regional planning and disaster relief agencies such as the Corps of Engineers, Office of Emergency Preparedness, Soil Conservation Service, interstate river basin commissions and state agencies, as well as private lending and insurance institutions, have indicated strong potential applications for ERTS image-maps of flood-prone areas.

Morris Deutsch↗
NASA NTRS1972

Diffusion bonding of IN 718 to VM 350 grade maraging steel

Diffusion bonding studies have been conducted on IN 718, VM 350 and the dissimilar alloy couple, IN 718 to maraging steel. The experimental processing parameters critical to obtaining consistently good diffusion bonds between IN 718 and VM 350 were determined. Interrelationships between temperature, pressure and surface preparation were explored for short bending intervals under vacuum conditions. Successful joining was achieved for a range of bonding cycle temperatures, pressures and surface preparations. The strength of the weaker parent material was used as a criterion for a successful tensile test of the heat treated bond. Studies of VM-350/VM-350 couples in the as-bonded condition showed a greater yielding and failure outside the bond region.

Crosby, S. R.↗
NASA NTRS1973

Final analysis and design of a thermal protection system for 8-foot HTST combustor

The cylindrical shell combustor with T-bar supports in the 8-foot HTST at the NASA-Langley Research Center encountered vibratory fatigue cracking over a period of 50-250 tunnel tests within a limited range of the required operating envelope. A preliminary design study provided several suitable thermal protection system designs for the combustor, one of which was a two-pass regenerative type air-cooled omega-shaped segment liner. A final design layout of the omega segment liner was prepared and analyzed for steady-state and transient conditions. The design of a support system for the fuel spray bar assembly was also included. Detail drawings suitable for fabrication purposes were also prepared. Liner design problems defined during the preliminary study included (1) the ingress of gas into the attachment bulb section of the omega segment, (2) the large thermal gradient along the leg of the omega bulb attachment section and, (3) the local peak metal temperature at the radius between the liner ID and the leg of the bulb attachment. These were resolved during the final design task. Analyses of the final design of the omega segment liner indicated that all design goals were met and the design provided the capability of operating over the required test envelope with a life expectancy substantially above the goal of 1500 cycles.

Moskowitz, S.↗
NASA NTRS1973

Development of thermally stable phosphonitrile elastomers for advanced aerospace structures

Both high and low molecular weight, curable poly(fluoroalkoxy phosphazene) terpolymers were prepared. These terpolymers resulted from reaction of (Cl2PNn) polymer with alkoxides derived from CF3CH2OH and C3F7CH2OH, and an alkoxide derived from CH3CH(OH)C2H4OH. The terpolymers were crosslinked with polyisocyanates at room temperature. High molecular weight materials were converted into isocyanate prepolymers which as films underwent moisture cures at room temperature. Prepolymer solutions were stable for several days, and showed good adhesion. Also the effects of polymerization of (Cl2PN)3 were studied. Purified octachlorophosphazene, thiocyanate salts, or hydrogen chloride were employed in attempts to decrease molecular weight. Hydrogen chloride was found to be a good agent for preparation of low molecular weight poly(dichloro phosphazene).

Reynard, K. A.↗
NASA NTRS1974

Experiments leading to the production of new glasses in space

A number of oxide compositions were prepared as ceramic rods which were melted in a CO2 laser beam while spinning. The molten droplets which were spun off the rods were allowed to free-fall cool. Many of the compositions selected were obtained as glasses of never-before-reported composition. It can be concluded that it is possible to obtain spherules of glasses from oxide compositions that have never before been obtained in the 'glassy state.' These initial experiments encourage future attempts to prepare larger sized glass boules by containerless melting and cooling in space or in appropriately simulated space.

Happe, R. A.↗
NASA NTRS1973

High modulus high temperature glass fibers

The search for a new high-modulus, high-temperature glass fiber involved the preparation of 500 glass compositions lying in 12 glass fields. These systems consisted primarily of low atomic number oxides and rare-earth oxides. Direct optical measurements of the kinetics of crystallization of the cordierite-rare earth system, for example, showed that the addition of rare-earth oxides decreased the rate of formation of cordierite crystals. Glass samples prepared from these systems proved that the rare-earth oxides made large specific contributions to the Young's modulus of the glasses. The best glasses have moduli greater than 21 million psi, the best glass fibers have moduli greater than 18 million psi, and the best glass fiber-epoxy resin composites have tensile strengths of 298,000 psi, compressive strengths of at least 220,000 psi, flexural strengths of 290,000 psi, and short-beam shear strengths of almost 17,000 psi.

Bacon, J. F.↗
NASA NTRS1973

Arc melting and homogenization of ZrC and ZrC + B alloys

A description is given of the methods used to arc-melt and to homogenize near-stoichiometric ZrC and ZrC-boron alloys, giving attention to the oxygen contamination problem. The starting material for the carbide preparation was ZrC powder with an average particle size of 4.6 micron. Pellets weighing approximately 3 g each were prepared at room temperature from the powder by the use of an isostatic press operated at 50,000 psi. These pellets were individually melted in an arc furnace containing a static atmosphere of purified argon. A graphite resistance furnace was used for the homogenization process.

Darolia, R.↗
NASA NTRS1974

Low-cost methods for fabrication of aluminum-boron shapes

Deformation processing has not been seriously considered as applicable to composite fabrication, particularly if the filament (e.g., boron) lacks plasticity. When, however, the brittle filament is clad with a ductile matrix such as 6061 Al, the underlying filament is protected from damage even when cold worked severely as in drawing and rolling. These two metal-working processes have been applied successfully to produce seven ply aluminum 50 vol % boron tubes up to 2 in. O.D. by 3 feet in length and flats 1 in. in width by 2 feet in length respectively. Although adequate densification is achieved via drawing and rolling, the former has been given major emphasis. Mechanical properties of rolled and drawn flats and tubes compare favorably with those prepared by static methods. However, the objective of the presentation is to focus on lower processing costs. In specific terms, 2 in. tubes in lengths up to 12 feet can be produced for as little as $150/lb. This is possible only because standard drawbench and carbide dies can be utilized. Furthermore, the major steps including cladding, preform preparation and drawing are conducive to automation.

Divecha, A. P.↗
NASA NTRS1974

Spectral reflectance properties of black chrome for use as a solar selective coating

The NASA-Lewis Research Center has determined that a widely available commercially electroplated decorative finish known as black chrome has desirable solar selective properties. Black chrome electroplated coating has high absorbtance in the solar spectrum and low emissivity in the 250 F blackbody thermal spectrum. The spectral reflectance properties of a commercially prepared black chrome on steel have been measured. Values are presented for reflectance of the black chrome, and compared with the reflectance of black paint and with two available samples of black nickel which had been prepared for solar selective properties. The reflectance of black chrome, of the two black nickels, and of black paint integrated over the solar spectrum for air mass 2 were 0.132, 0.123, 0.133, and 0.033, respectively. The reflectance of the black chrome, two black nickels, and of the black paint integrated over the blackbody spectrum for 250 F from 3 to 15 microns are 0.912, 0.934, 0.891, and 0.033, respectively. These reflectance measurements indicate absorptivity-to-emissivity values of 9.8, 13.8, 8.0, and 1.00, respectively.

Mcdonald, G. E.↗
NASA NTRS1958

Notes on Space Technology

These notes are part of a space technology course given at the Flight Research Division of the NACA Langley Aeronautical Laboratory during the early part of 1958. The course was conducted as a self-education program within the Flight Research Division and the various Sections of the notes were prepared for the most part by members of the Division; however, four of the seventeen Sections were prepared by personnel from the Pilotless Aircraft Research Division and the Compressibility Research Division who were very helpful in making the program more complete. The notes have been compiled on a brief time schedule and it will be apparent to the reader that the present version is incomplete and to some extent may lack uniformity in length, type of presentation, and technical detail in the various Sections. Nevertheless, there has been a demand for the notes from those who have seen them, and it is thought that they might serve a useful purpose if they were made available on a wider basis. It is believed that for the sake of expediency this goal is best achieved by making the material available now in its present unedited form instead of following the usual NACA editing procedures.

Henry A Pearson↗
NASA NTRS1974

Space shuttle orbiter vehicle star tracker test program plan

The development model test program was written to provide guidance for essential star tracker test support to the Space Shuttle Orbiter Program. The program organization included test equipment preparation, prototype baseline/acceptance tests, prototype total performance tests, and prototype special tests. Test configurations, preparation phase, documentation, scheduling, and manpower requirements are discussed. The test program permits an early evaluation of the tracker's performance prior to completion and testing of the final flight models.

Smith, R. A.↗
NASA NTRS1974

Applications of Skylab EREP photographs to mapping of landforms and environmental geology in the Great Plains and Midwest

The author has identified the following significant results. The utility of Skylab 2 and 3 S-190A multispectral photos for environmental-geologic/geomorphic applications is being tested by using them to prepare 1:250,000-scale maps of geomorphic features, surficial geology, geologic linear features, and soil associations of large, representative parts of the Great Plains and Midwest. Parts of Nebraska, Iowa, Missouri, and South Dakota were mapped. The maps were prepared primarily by interpretation of the S-190A photos, supplemented by information from topographic, geologic, and soil maps and reports. The color band provides the greatest information on geology, soils, and geomorphology; its resolution also is the best of all the multispectral bands and permits maximum detail of mapping. The color-IR band shows well the differences in soil drainage and moisture, and vegetative types, but has only moderate resolution. The B/W-red band is superior for topographic detail and stream alinements. The B/W-infrared bands best show differences in soil moisture and drainage but have poor resolution, especially those from SL 2. The B/W-green band generally is so low contrast and degraded by haze as to be nearly useless. Where stereoscopic coverage is provided, interpretation and mapping are done most efficiently using a Kern PG-2 stereoplotter.

Morrison, R. B.↗
NASA NTRS1974

Crosslinking and degradation mechanisms in model sealant candidates

Heterocyclic ring systems were investigated, triazines and 1,2,4-oxadiazoles. Only a limited effort was extended to the preparation of triazoles. Compounds, n-perfluoroheptyl-s-triazine, a perfluoroether substituted triazine, C3F7OCF(CF3)CF2OCF(CF3) 3C3N3,1,4-bus (5-perfluoro-n-heptyl)-1,2,4-oxadiazolyl -benzene, its perfluoroalkylether substituded analogue, and 3,5-bis(perfluoro-n-heptyl)-1,2,4-oxadiazole were synthesized and characterized. To eliminate the effect due to a tertiary fluorine present in branched materials, the pure n-alkyl-compounds were prepared. The main starting material, perfluoro-n-octanonitrile, was obtained from commercially available perfluoro-n-octanoic acid via a three step synthesis.

Paciorek, K. L.↗
NASA NTRS1974

Development of space stable thermal control coatings for use on large space vehicles

The development of a large scale manufacturing method for the production of a stable zinc orthotitanate pigment is discussed. Major emphasis was placed on the evaluation of ultraviolet radiation stability tests of pigments derived from coprecipitated and individually precipitated oxalates. Emphasis was also placed on an investigation of the conditions (time and temperature) leading to high reflectance and high optical stability. Paints were formulated in OI-650 and in OI-650G vehicles from pigments which were prepared at various temperatures. Analyses of ultraviolet irradiation test data were conducted regarding optimum pigment preparation parameters and treatment conditions.

Gilligan, J. E.↗
NASA NTRS1974

Development of space stable thermal control coatings for use on large space vehicles

The development of a large scale manufacturing method for the production of a stable zinc orthotitanate pigment is discussed. Major emphasis was placed on the evaluation of the radiation stability of Tektronix, Inc. pigments and of the conditions (time and temperature) leading to high reflection and high optical stability. Paints were formulated in OI-650 and in OI-650G vehicles from pigments which were prepared at various temperatures, some of which were chemically treated to remove ZnO. Ultraviolet irradiation tests of these paints were performed, and observations made regarding optimum pigment preparation parameters.

Gilligan, J. E.↗
NASA NTRS1974

Application of ERTS-1 data to the protection and management of New Jersey's coastal environment

The author has identified the following significant results. Quasi-operational information products for coastal zone management have been prepared using ERTS-1 imagery and collateral aerial photography. These products were applied to the practical regulation, protection, and management of New Jersey's coastal environment. Procedures were developed for the operational use of ERTS-1 data products within New Jersey's Department of Environmental Protection. Successful analysis and product preparation for operational needs centered on four major coastal resource problem areas: (1) detection of environmental changes in coastal areas, (2) siting of ocean outfalls, (3) monitoring of offshore waste disposal, and (4) calculation of recession rates along the Atlantic Shore. The utility and monetary benefits derived from ERTS and aircraft imagery for each problem area have been determined. The NJDEP estimates the possibility of $620,000 yearly savings through the use of an operational ERTS system and a one-time savings of $2.8 million on current or planned projects if a truly operational ERTS type satellite were available.

Yunghans, R. S.↗