Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “numerical continuation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

IGA-MPM: The Isogeometric Material Point Method

In this work, we propose the use of Isogeometric Analysis (IGA) within the context of the Material Point Method (MPM), and refer to the approach as IGA-MPM. We use the idea of IGA, and its instantiation based on Non-Uniform Rational B-Splines (NURBS), to build higher-order accurate and smooth approximation for MPM. Higher-order smoothness yields a continuous representation of the strain rate, and, as a result, prevents jumps in the stress and other history variables as the material points cross the element boundaries. Furthermore, NURBS can exactly represent all conic sections and the corresponding symmetries in the solution, which may be important in some applications. Several numerical examples of increasing complexity are presented, and show the ability of IGA-MPM to eliminate the well known cell-crossing instability of the conventional MPM. In addition, the examples presented demonstrate improved accuracy, convergence, and symmetry preservation of IGA-MPM compared to the conventional MPM, both for rectilinear and curved geometries.

42 ENGINEERING↗
NASA NTRS1972

Theoretical study of corrugated plates: Shear stiffness of a trapezoidally corrugated plate with discrete attachments to a rigid flange at the ends of the corrugations

Analysis and numerical results are presented for the elastic shear stiffness of a corrugated shear web with a certain type of discrete attachments at the ends of the trough lines of the corrugations, namely point attachments to a rigid flange which interferes with the deformations of the end cross sections by preventing downward movement but permitting upward (lifting off) movement. The analysis is based on certain assumed modes of deformation of the cross sections in conjunction with the method of minimum total potential energy and the calculus of variations in order to obtain equations for the manner in which the assumed modes of deformation vary along the length of the corrugation. The numerical results are restricted to the case of equal-width crests and troughs but otherwise apply to a wide variety of geometries. They are in the form of graphs which give the overall shear stiffness as a fraction of the overall shear stiffness that could be obtained by having continuous attachment at the ends of the corrugations.

Hsiao, C.↗
NASA NTRS1976

Design, fabrication and test of prototype furnace for continuous growth of wide silicon ribbon

A program having the overall objective of growing wide, thin silicon dendritic web crystals quasi-continuously from a semi-automated facility is discussed. The design considerations and fabrication of the facility as well as the test and operation phase are covered; detailed engineering drawings are included as an appendix. During the test and operation phase of the program, more than eighty growth runs and numerous thermal test runs were performed. At the conclusion of the program, 2.4 cm wide web was being grown at thicknesses of 100 to 300 micrometers. As expected, the thickness and growth rate are closely related. Solar cells made from this material were tested at NASA-Lewis and found to have conversion efficiencies comparable to devices fabricated from Czochralski material.

Duncan, C. S.↗
NASA NTRS1978

NASA aviation safety reporting system

An analytical study of reports relating to cockpit altitude alert systems was performed. A recent change in the Federal Air Regulation permits the system to be modified so that the alerting signal approaching altitude has only a visual component; the auditory signal would continue to be heard if a deviation from an assigned altitude occurred. Failure to observe altitude alert signals and failure to reset the system were the commonest cause of altitude deviations related to this system. Cockpit crew distraction was the most frequent reason for these failures. It was noted by numerous reporters that the presence of altitude alert system made them less aware of altitude; this lack of altitude awareness is discussed. Failures of crew coordination were also noted. It is suggested that although modification of the altitude alert system may be highly desirable in short-haul aircraft, it may not be desirable for long-haul aircraft in which cockpit workloads are much lower for long periods of time. In these cockpits, the aural alert approaching altitudes is perceived as useful and helpful. If the systems are to be modified, it appears that additional emphasis on altitude awareness during recurrent training will be necessary; it is also possible that flight crew operating procedures during climb and descent may need examination with respect to monitoring responsibilities. A selection of alert bulletins and responses to them is presented.

Source record↗
NASA NTRS1982

The initial growth of disturbances in a baroclinic flow

The growth of perturbations in a baroclinic flow is examined as an initial value problem. Although the long time asymptotic behavior is dominated by discrete exponentially growing normal modes when they exist, these do not form a complete set and initial intensification is shown to be dependent on the continuous spectrum. The vertical structure of perturbations emerges as an important influence on initial growth, and physically realistic disturbances are shown to grow to amplitudes where nonlinear effects are important before obtaining normal mode form. Connection is made with the work of Arnol'd (1965) and Blumen (1968) and the numerical experiments of Simmons and Hoskins (1979). Application of these results to cyclogenesis in geographically fixed areas is suggested and implied constraints on numerical models discussed.

Farrell, B. F.↗
NASA NTRS1983

Long-time states of inverse cascades in the presence of a maximum length scale

It is shown numerically, both for the two-dimensional Navier-Stokes (guiding-center plasma) equations and for two-dimensional magnetohydrodynamics, that the long-time asymptotic state in a forced inverse-cascade situation is one in which the spectrum is completely dominated by its own fundamental. The growth continues until the fundamental is dissipatively limited by its own dissipation rate.

Hossain, M.↗
NASA NTRS1983

Long-time states of inverse cascades in the presence of a maximum length scale

It is shown numerically, both for the two-dimensional Navier-Stokes (guiding-center plasma) equations and for two-dimensional magnetohydrodynamics, that the long-time asymptotic state in a forced inverse-cascade situation is one in which the spectrum is completely dominated by its own fundamental. The growth continues until the fundamental is dissipatively limited by its own dissipation rate. Previously announced in STAR as N83-23546

Hossain, M.↗
NASA NTRS1993

The soliton transform and a possible application to nonlinear Alfven waves in space

The inverse scattering transform (IST) based on the derivative nonlinear Schroedinger (DNLS) equation is applied to a complex time series of nonlinear Alfven wave data generated by numerical simulation. The IST describes the long-time evolution of quasi-parallel Alfven waves more efficiently than the Fourier transform, which is adapted to linear rather than nonlinear problems. When dissipation is added, so the conditions for the validity of the DNLS are not strictly satisfied, the IST continues to provide a compact description of the wavefield in terms of a small number of decaying envelope solitons.

Hada, T.↗
NASA NTRS1994

Multiplex approach to the photometric detection of planets

If the hypothesis is correct that most solar-like stars have planetary systems and have planets in inner orbits, then approximately 1% of these stars should have planets with orbital planes close enough to our line of sight to show transits. To get a statistically significant estimate of the fraction of stars that have planets in inner orbits, it is necessary to monitor thousands of stars continuously for a period of several years. To accomplish this requires the use of a multi-channel photometer system. We present here several multi-channel methods that have been used for ground-based observations and a concept for applying multi-channel photometry to the detection of numerous Earth-sized planets.

Borucki, William↗
NASA NTRS2008

Effect of GOES-R Image Navigation and Registration Errors on Atmospheric Motion Vectors

High temporal frequency imagery from geostationary satellites allows for the continuous monitoring of rapidly changing atmospheric constituents such as smoke, dust, water vapor and clouds. The image sequences are often used to quantify the displacement of image features such as water vapor and clouds to produce atmospheric motion vectors (AMVs) which are used as diagnostic tools and also assimilated into numerical weather forecast models. The basic principle behind the determination of AMVs is the calculation of the physical displacement of features from one image (time) to the next. This process assumes that the features being tracked do not change as a function of time, usually requiring the use of short time interval imagery to minimize substantial change in size and shape of the features being tracked. High spatial resolution imagery also is required for reliable feature identification. While these image resolution and temporal sampling requirements often provide major drivers for space-based instrument design requirements, accurate image navigation and registration, INn (between a sequence of images), is also critical to the derivation of useful AMVs. In this paper and poster to be presented at the conference, the image navigation and registration (INR) accuracy expected for the Advanced Baseline Imager (ABI) on the GOES-R series of satellites will be discussed in light of its impact on AMV accuracy. Significant satellite platform and modeling enhancements are planned which should significantly improve INn performance of the GOES-R instruments. Some of these improvements have been demonstrated for the GOES-13 satellite which was launched in summer of 2006. An analysis of GOES-13 INR data, from the special satellite check out period, will be used in the assessment.

Jedlovec, Gary↗
NASA NTRS2012

The Advanced Technology Microwave Sounder (ATMS): The First 10 Months On-Orbit

The Advanced Technology Microwave Sounder (ATMS) is a new satellite microwave sounding sensor designed to provide operational weather agencies with atmospheric temperature and moisture profile information for global weather forecasting and climate applications. A TMS will continue the microwave sounding capabilities first provided by its predecessors, the Microwave Sounding Unit (MSU) and Advanced Microwave Sounding Unit (AMSU). The first ATMS was launched October 28, 2011 on board the NPOESS Preparatory Project (NPP) satellite. Microwave soundings by themselves are the highest-impact input data used by Numerical Weather Prediction (NWP) models, especially under cloudy sky conditions. ATMS has 22 channels spanning 23-183 GHz, closely following the channel set of the MSU, AMSU-A1/2, AMSU-B, Microwave Humidity Sounder (MHS), and Humidity Sounder for Brazil (HSB). All this is accomplished with approximately 1/4 the volume, 1/2 the mass, and 1/2 the power of the three AMSUs. A description of ATMS cal/val activities will be presented followed by examples of its performance after its first 10 months on orbit.

Kim, Edward↗
NASA NTRS2008

GEO/SAMS - The Geostationary Synthetic Aperture Microwave Sounder

The National Oceanic and Atmospheric Administration (NOAA) has for many years operated two weather satellite systems, the Polar-orbiting Operational Environmental Satellite system (POES), using low-earth orbiting (LEO) satellites, and the Geostationary Operational Environmental Satellite system (GOES), using geostationary earth orbiting (GEO) satellites. (Similar systems are also operated by other nations.) The POES satellites have been equipped with both infrared (IR) and microwave (MW) atmospheric sounders, which makes it possible to determine the vertical distribution of temperature and humidity in the troposphere even under cloudy conditions. Such satellite observations have had a significant impact on weather forecasting accuracy, especially in regions where in situ observations are sparse. In contrast, the GOES satellites have only been equipped with IR sounders, since it has not been feasible to build a large enough antenna to achieve sufficient spatial resolution for a MW sounder in GEO. As a result, GOES soundings can only be obtained in cloud free areas and in the less important upper atmosphere, above the cloud tops. This has hindered the effective use of GOES data in numerical weather prediction. Full sounding capabilities with the GOES system is highly desirable because of the advantageous spatial and temporal coverage that is possible from GEO. While POES satellites provide coverage in relatively narrow swaths, and with a revisit time of 12-24 hours or more, GOES satellites can provide continuous hemispheric coverage, making it possible to monitor highly dynamic phenomena such as hurricanes.

Lambrigtsen, Bjorn H.↗
NASA NTRS2017

Micromechanics of Composite Materials Governed by Vector Constitutive Laws

The high-fidelity generalized method of cells micromechanics theory has been extended for the prediction of the effective property tensor and the corresponding local field distributions for composites whose constituents are governed by vector constitutive laws. As shown, the shear analogy, which can predict effective transverse properties, is not valid in the general three-dimensional case. Consequently, a general derivation is presented that is applicable to both continuously and discontinuously reinforced composites with arbitrary vector constitutive laws and periodic microstructures. Results are given for thermal and electric problems, effective properties and local field distributions, ordered and random microstructures, as well as complex geometries including woven composites. Comparisons of the theory's predictions are made to test data, numerical analysis, and classical expressions from the literature. Further, classical methods cannot provide the local field distributions in the composite, and it is demonstrated that, as the percolation threshold is approached, their predictions are increasingly unreliable. XXXX It has been observed that the bonding between the fibers and matrix in composite materials can be imperfect. In the context of thermal conductivity, such imperfect interfaces have been investigated in micromechanical models by Dunn and Taya (1993), Duan and Karihaloo (2007), Nan et al. (1997) and Hashin (2001). The present HFGMC micromechanical method, derived for perfectly bonded composite materials governed by vector constitutive laws, can be easily generalized to include the effects of weak bonding between the constituents. Such generalizations, in the context of the mechanical micromechanics problem, involve introduction of a traction-separation law at the fiber/matrix interface and have been presented by Aboudi (1987), Bednarcyk and Arnold (2002), Bednarcyk et al. (2004) and Aboudi et al. (2013) and will be addressed in the future.

micromechanics↗
NASA NTRS2010

TPSAS-NF1676L-10658-DND

The systematic methodology for constructing fourth-order finite domain Energy Stable WENO schemes is developed. We prove that for hyperbolic systems, the finite domain ESWENO scheme is stable in the energy norm for both continuous and discontinuous solutions. The eigenvalues of the finite domain ESWENO dissipation operator are located in the left-half plane. Based on the rigorous truncation error analysis, the new weight functions are developed, which drastically improve the accuracy of the ESWENO scheme and provide excellent shock-capturing capabilities. Numerical experiments show that the new finite domain ESWENO scheme with the new weights outperform the conventional WENO schemes in terms of accuracy.

Travis Fisher↗
DOE OSTI2026

Optimal Operation of Residential High Performance Water Heater for Reduction of Electricity Cost and Peak Demand Through Field Validation

Water heating accounts for about 18% of a typical US home’s energy use. Modern water heaters have enabled control options through APIs, offering customers the opportunity to reduce their energy cost and peak demand by dynamically adjusting settings. A water heater’s capacity to store energy using its storage tank makes it an asset for peak demand reduction and energy cost savings. For this reason, a mixed-integer linear programming model is proposed to minimize the energy cost of a high-performance water heater while also reducing the peak demand of the residential household under a time-of-use utility rate by dynamically changing the water heater’s running mode. Specifically, a multi-objective optimization model is formulated to determine the mode settings of the water heater considering hot water use, time-of-use rate, and peak demand limit of the residential household. The mode settings are associated with different dead bands of water temperature for triggering on/off action of the heat pump and heating element. A 66-gal hybrid electric high performance water heater was used for numerical simulation and practical experiments. The simulation results were well aligned with measurements of practical experiments, validating the soundness of the thermodynamic model. In addition, reductions of energy cost, enabling affordability, and reducing peak demand are demonstrated. The research team also developed a software framework with dashboards to automatically and continuously monitor and manage devices.

Liu, Guodong [ORNL] (ORCID:0000000213498608)↗
DOE OSTI2020

MST e-News (Fall 2020)

As we just closed the fiscal year, I have been reflecting on the state of the division, and in particular, the health of our budget, staffing plans, and infrastructure. As many of you know, the division has grown in both budget and workforce. Since 2018, the division has grown from 150 to 174 permanent staff (but note, with students, post docs, and contractors—we are a division of 218). As one might imagine, our budget has grown significantly too. In 2018, at year end, we had a budget of $85 million. While I am still collecting some final numbers, all projections indicate that we closed out FY20 at $115 million. This growth has occurred primarily in our applied energy programs as well as Pu Sustainment. However, it is important to note that there have been important contributions to this growth across much of the portfolio, including in our OES, BES, and LDRD programs. With that said, to support this programmatic growth, as a division we have done a tremendous amount of hiring to grow while outpacing attrition. At the same time, we have been establishing numerous new capabilities at TAs -3, -35, and -55. While this is exciting, it means we have some things to carefully consider. We have had numerous capability investments (i.e., new microscopes at TAs -3 and -55, new mechanical testing capabilities at TAs -3 and -35, and new synthesis capabilities across the division). But we are starting to feel the real crunch of the limitations of our aging facilities. Still more, even with this substantial growth, we continue to hire. And I believe that we really need to spend time thinking about mentoring, career development, and retention of our most important investment—our staff.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2024

Phenotypic Evaluation of Saccharum spp. Genotypes during the Plant-Cane Crop for Biomass Production in Northcentral Mississippi

Saccharum is relatively new to 33° N latitude. S. spontaneum readily hybridizes with commercial sugarcane (Saccharum spp.) and lends cold tolerance and greater yield to the hybrid progeny, called energycane. Since 2007, there have been numerous new hybrid and backcross energycane genotypes developed but there is a paucity of information about them. Twenty energycane genotypes were tested in the first season of growth from cane propagules (plant cane; PC) against Ho 02-113 (a control) for two site-years in northcentral Mississippi. Grand (exponential) growth continued into October. The prevailing paradigm is that tonnage is what matters. Except for percentage cellulose, all factors tested (dry matter yield, extractable juice volume, °Brix, theoretical ethanol from fermentation, theoretical ethanol from cellulose, and total theoretical ethanol) were greater from the second site-location compared to the first. Dry matter yield (DMY) and total theoretical ethanol yield (TTEY) were moderately correlated. Over the two years of this test only Ho 14-9213 exceeded in mean DMY of Ho 02-113. Sixteen of the 19 test genotypes in this test equaled or exceeded the mean TTEY of Ho 02-113.

60 APPLIED LIFE SCIENCES↗